Certification Exhibit FCC ID: 2AJX7KP9000 IC: 21998-KP9000 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-247 Project Number: 16-0273 Manufacturer: QSR Automations, Inc. Model: KP-9000 Manual 5945 Cabot Parkway, Suite 100 Alpharetta, GA 30005 USA Voice: 678-341-5900 KP-9000 Wireless Keypad Users Manual November 2016 Contents Product Overview........................................................................................................................................ 3 Product Specifications ................................................................................................................................ 3 Out of the Box ............................................................................................................................................. 4 LED Indicators ............................................................................................................................................. 4 Troubleshooting .......................................................................................................................................... 6 Sample Images ........................................................................................................................................... 8 Control Point 3.1 ......................................................................................................................................... 8 Appendix A: Device Compliance Information ......................................................................................... 9 KP-9000 Wireless Keypad: Users Guide 2 Product Overview The KP-9000 is a low-power, longer life, wireless keypad that is backward compatible with QSRs other keypads. It is a Bluetooth Low Energy (BLE), twenty button, customizable keypad that does not require any cabling. Product Specifications Feature Specification Key Rating 30 Million Pushes Mounting Options Optional Bracketing Available Overlay Options Customizable Keypad Overlays, Installs without Tools Features Software Programmable Scan Codes Downloadable Firmware for Easy Updates and Support ConnectSmart Battery Level Indication Chassis Durable, Premium Grade Polycarbonate Metal Reinforced Top for Extended Life Resistant to Extreme Temperatures, Water and Grease Dimensions 1.25 x 8.25 x 2.75 (H x W x D) Weight Power Audio Interface Range 11.2 ounces (without batteries) Two, Four or Six AAA Batteries On-board Annunciator Bluetooth Low Energy (BLE) via USB Dongle Up to 30 feet, in direct line-of-sight Environmental Operating Temperature 0 50 Celsius Storage Temperature
-20 95 Celsius Humidity Altitude 10% - 95%, non-condensing 15,000 feet Certifications FCC Part 15, Class A Warranty Limited 3-Year Hardware Warranty KP-9000 Wireless Keypad: Users Guide 3 Out of the Box The KP-9000 Wireless Keypad arrives with dongle stored inside. 1. Unscrew the back of the keypad and remove the dongle. 2. Install six AAA batteries. (The keypad only requires two AAA batteries to function, but up to six batteries may be installed at once to increase the keypads battery life.) 3. Plug the dongle into the Kitchen controller. 4. The keypad and dongle have been pre-paired, and will pair automatically. Note: It is recommended that you label the keypad and its corresponding dongle upon unpacking to avoid confusion should they ever become separated. LED Indicators Keypad LED There is one LED visible in the upper left portion of the keypad. The following table describes what the different LED messages are conveying. LED No LED Mode Unpaired Searching Blinking low-duty Amber
(Amber also on very low-
duty cycle for low battery) Description The default when not paired with a dongle. Special keypress (upper left and bottom right keys for 3s) required to enter pairing mode. Unpaired is the mode for factory storage and shipping. Keypad will shut off in this state, using the lowest power consumption possible with batteries installed. Dongle has been previously paired but is not currently found. The keypad will search indefinitely in an attempt to reconnect. However, it will only search 1 minute at high speed (10Hz) before dropping back to power savings (1Hz). KP-9000 Wireless Keypad: Users Guide 4 Special keypress can force into pairing mode. In BLE terms, a keypad Searching means sending only directed advertisements to the address of its paired dongle. Normal operating behavior with paired dongle found and communicating. Wireless poll period and slave latency depend on whether beeper is enabled
(power savings are greater when in its default state beeper disabled). Special keypress can force into pairing mode. Allows pairing with a new dongle. Requires special keypress to enter. It has a 1 minute timeout, as pairing consumes high power to advertise. Keypad will auto-pair to first dongle found in pairing mode. If timeout is reached, behavior depends on whether it was previously paired to a dongle. In BLE terms, Pairing means sending undirected advertisements. Connected Solid Green for one second (Also blinks Green on each key press or SCROLL LOCK) Pairing Blinking Amber once every 10 seconds until paired Low Battery Double blinking Amber every 10 seconds Dongle LED There are two LEDs visible. One on either side of the dongle. The following table describes what the different LED messages are conveying. Mode Unpaired LEDs Off Searching Slow Blinking Blue Connected Solid Blue Pairing Rapid Blinking
(low-duty) Blue Description Only entered when not paired and when software has commanded dongle to not auto pair. Keypad has been previously paired, but is not currently found. Dongle will search for 1 minute to attempt to reconnect. Afterwards, it will automatically enter pairing mode. Software commands can override this behavior. In BLE terms, Searching on the dongle means passive scanning for only directed advertisements from its paired keypad. Normal operating behavior with paired keypad found and communicating. In BLE terms, Connected here means connected and bonded. Allows pairing with a new keypad. If previously paired, the dongle will still auto-connect with KP-9000 Wireless Keypad: Users Guide 5 that keypad if found (same as searching). If a new keypad in pairing mode is found, a new pairing (and connection) is established with that keypad. Other keypads not in pairing mode are ignored. In BLE terms, Pairing means active scanning for advertisements from any keypad, but also accepting directed advertisements from its paired keypad. Troubleshooting What Does This Light Mean?
Dongle If the light is Off Slow blinking blue Solid blue Rapid blinking blue Connected Pairing This means What next Unpaired Searching Pair with keypad.*
Dongle will attempt to reconnect. The device is ready to go!
Dongle is pairing with keypad. Keypad If the light is Off Blinking low-duty amber Blinking low-duty green Rapid blinking amber Connected Pairing This means What next Unpaired Searching Pair with dongle.*
Keypad will attempt to reconnect. The device is ready to go!
Keypad is pairing with dongle.
*Manually Pairing the Devices 1. Insert dongle in the USB port of target controller. 2. Turn the controller on. 3. Hold the KP-9000 (prepared with batteries installed) so that the light is in the upper left corner. 4. Press and hold both top left key and bottom right key simultaneously for 3 seconds. 5. The LED will quickly blink on and off in amber while it is trying to talk to the dongle. 6. If it establishes the pairing with the dongle, the light will blink green briefly and then remain quiet. KP-9000 Wireless Keypad: Users Guide 6 Set Pairing Mode The Set Pairing Mode command impacts both the dongle and keypad. When the command is given to change the pairing mode to Unpaired, the dongle goes idle and the keypad goes into searching mode. That means the keypad is still looking for the dongle to which it was previously paired, so if you send a command to change the pairing mode back to Pairing, the dongle will "wake up" and automatically reconnect to the keypad. If you want to pair the keypad with a different dongle while the current dongle is idle, press and hold keys 1 and 20 simultaneously on the keypad to force the keypad into pairing mode. When in this mode, the keypad will pair with the first available dongle it finds. It's most effective to do this with only one keypad powered on at a time. KP-9000 Wireless Keypad: Users Guide 7 Sample Images Keypad - Opened Back Keypad - Front Control Point 3.1 The KP-9000 Wireless Keypad can be configured and managed through ControlPoint 3.1. For more information, see the ControlPoint 3.1 Users Guide. KP-9000 Wireless Keypad: Users Guide 8 Appendix A: Device Compliance Information Warning: Changes or modifications to this device not expressly approved by QSR Automations, Inc. could void the users authority to operate the equipment. Federal Communications Commission (FCC) Statement FCC ID NUMBER Keypad Dongle 2AJX7KP9000 2AJX7KP9000D This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Innovation, Science, and Economic Development (ISED) Canada Statement IC ID Number Keypad Dongle 21998-KP9000 21998-KP9000D This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. KP-9000 Wireless Keypad: Users Guide 9 Sample Combined FCC/IC Label Keypad
(BA10227) FCC ID: 2AJX7KP9000 IC: 21998-KP9000 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions.
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: Picture only showing label location not actual label KP-9000 Wireless Keypad: Users Guide 10 Dongle HVIN: BA10222 Rev. B FCC : 2AJX7KP9000D IC: 21998-KP9000D Note: IDs are laser printed onto USB connector KP-9000 Wireless Keypad: Users Guide 11 This publication contains information protected by copyright and is considered confidential. No part of this publication may be photocopied or reproduced in any form without the prior written consent from QSR Automations, Inc. The marks QSR Automations, ePic, ConnectSmart, eXpert, xCeed, WebAhead, WebReserve, and DineTime are registered trademarks of QSR Automations, Inc. Other products mentioned herein may be trademarks and/or registered trademarks of their respective companies. The information in this publication is subject to change without notice. QSR Automations, Inc. 1996-2016 QSR Automations, Inc. All rights reserved. Printed in the U.S.A. QSR AUTOMATIONS, INC. SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. THIS INFORMATION IS PROVIDED AS IS" AND QSR AUTOMATIONS, INC. DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED OR STATUTORY AND EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, GOOD TITLE AND AGAINST INFRINGEMENT. QSR Automations, Inc. 2301 Stanley Gault Pkwy Louisville, KY 40223 502-297-0221 www.qsrautomations.com KP-9000 Wireless Keypad: Users Guide 12