FCC ID: 2ASRL-DR100 DR- 100 COMMUICATION / GPS MODULE

DR100 User Guide Version 2 - 10 September 2015 Contents Logging In Account Dashboard Setup Users Setup Geo-Place Vehicle Alerts The Mapping page DR100 - USER GUIDE 1 Logging In Logging In For The First Time Check your email inbox for an email from SWATno-reply@karrrecovery.com. There you will find an email containing a temporary password to access your account for the first time and a link to the SWAT ENHANCED website, karrrecovery.com. Please note that the email you provided the SWAT customer service department is your username. Forgotten Password Should you forget your password, click on Forgotten Password from the Login Screen. An email will be sent to your mailbox with instructions on how to reset your password. DR100 - USER GUIDE 2 Account Dashboard The Account Dashboard Page The account dashboard contains all the information relevant to your account. You will see the following items displayed:

List of vehicles linked to your account (Device description can be edited) License Plate (Hovering over the license plate will tell you when the device in that vehicle last reported a position) Product (Swat Enhanced or SWAT) Status (Tell you whether your account is active or disabled) Map Mode (Number of times you can go to the Map Page) Requests (Number of available commands that can be sent to the device for the month) IO Status (Not Applicable) Alerts (Number of alerts setup for that vehicle) Options (Vehicle icon is a link that take you to mapping page for immediate tracking) Top Menu Links All pages on the website contain links to all of the pages available. Dashboard = Account Page, is the account link is to the main page or account dashboard. Mapping = Map Page, takes you to the mapping page that allows you to send commands to the device, provides communication history and location history. Settings = Users Page, allows you to edit your personal information. Settings = Alerts Page, allows you to setup your email/text notifications. Settings = Geo Places, allows you to create Geo Place boundaries. Settings = Device Configuration, allows you to edit your vehicle information and turn on the Speed and Geo Place notifications. DR100 - USER GUIDE 3 On the right of the Account Dashboard, will be the Account Profile, User Profile and a list of your subscriptions Account Profile will show the current unit of measurement, whether or not a verification code has been set and the date and time the account was created. Please select the red icon next to Verification Code to see your code. The verification code is used to identify you as an Account Administrator. It can be a word, number or any combination of letters and numbers. User Profile will show the user contact information we have on record, email address

(login), time zone on your account and the last time you logged in. Subscriptions displays all subscription or products active on the account DR100 - USER GUIDE 4 Setup Users How To Setup New Users You can easily setup new users by selecting the Settings button from the top menu bar and selecting Users. The page that loads contains your user details which can be edited should it be required. It is important that you setup your verification code as soon as possible as it will be required to verify your identity in an emergency situation. At the top right of the screen you will see 3 options:

My Details Provides a view of the details we have loaded for you. From here you can update your contact details, setup a verification code*, edit your password and adjust your time zone setting. User List Gives a view of all users for the account along with the option to edit their details Add User Allows you to setup a new user on the system.

* The verification code will be required to verify your identity in an emergency situation. Select Add User and you will be required to input the new users details and select Save. DR100 - USER GUIDE 5 Setup Geo-Place How To Setup A Geo-Place A Geo-Place can be used to define a perimeter and provide alerts when a vehicle enters or exits the perimeter. Only 1 Geo-Place per vehicle can be active at any one time. From the Settings button select Geo-

Place which will load the Geo-Place Map. Select Search/Add from the top right of the map which will expand the Geo-Place details menu. A Geo-Place can either be setup by inputting an address or by selecting Create Geo Place which will place a circle on the map. The circle can be moved by simply clicking and dragging the flag to the desired location on the map. Provide a name for the location and select Save which will save the name and location. The Geo-Place then needs to be enabled from the Device Configuration Page. DR100 - USER GUIDE 6 Define Vehicle Alerts How To Configure Vehicle Triggers Vehicle triggers are setup on the Device Configuration page and accessed from the Settings button on the top menu bar. When you select the desired vehicle from drop down, the vehicle details will load. Please ensure the information is accurate as it will be crucial in the event of a recovery. Current alert settings will be shown and can be adjusted if required. Update the desired alert speed from the drop down menu or select Not Set to leave the trigger deactivated. One of the configured Geo-Places can be selected or a new one setup by selecting Configure Geo-Places. Only one Geo-Place can be active per vehicle at any one time. Select Update when complete and the new settings will be sent to the vehicle within a few minutes. DR100 - USER GUIDE 7 The Alerts Page Distribution of alerts is configured from the Alerts page, accessed from the Settings button on the top menu bar. Under the Alert Listing section you will see the alerts that have been setup previously. There are 5 alerts that can be setup:

Geo Warning Enter Triggers an alert when the vehicle enters the defined Geo-

Place Geo Warning Exit Triggered when the vehicle exits the defined Geo-Place Speed Trap Triggers an alert when the vehicle exceeds the defined speed Vehicle Battery Disconnect Triggered if the vehicle battery is disconnected Vehicle Battery Low Triggers alert if the battery charge is low Each alert can be distributed as either an email or SMS. The Triggered Alerts section contains all previous alerts with the time and date, alert type and vehicle. DR100 - USER GUIDE 8 How To Setup Alerts Alerts are setup from the Alerts page. Alerts can can be setup for either a group or individual vehicles. From the drop down menus select either the group or vehicle, then select the type of alert from the options in the Alert Message field. Should you be on the system and would like a pop-up alert, select the Yes box from the On Screen Alert option. Enter the email address and mobile number you would like the alert sent to and choose Save. Cell numbers must be entered with +1 without spaces and dashes. All emails or cell numbers must be separated by a semicolon (;). Sample Cell Numbers: +19491119999;

+19492229999 Sample Emails: swatplus1@swatplus.com; swatplus2@swatplus.com The Alert is then saved and will trigger should the parameters be breached. The process needs to be repeated for each alert type, per vehicle or group. Note: You may enter your cell number as an email address by formatting your cell number as an email address. Check with your cell provider for the format. Here are some popular samples:

T-Mobile Format: 10-digit cell phone number @ tmomail.net Example: 3335551111@tmomail.net Verizon Wireless Format: 10-digit cell phone number @ vtext.com Example: 3335551111@vtext.com Sprint PCS Format: 10-digit cell phone number @ messaging.sprintpcs.com Example: 3335551111@messaging.sprintpcs.com DR100 - USER GUIDE 9 Cingular Wireless Format: 1 + 10-digit cell phone number @ cingularme.com Example: 13335551111@cingularme.com AT&T PCS Format: 10-digit cell phone number @ mobile.att.net Example 1: 3335551111@mobile.att.net Example 2: 3335551111@txt.att.net DR100 - USER GUIDE 10 The Mapping Page Layout Of The Mapping Page 1. Vehicle List Shows a list of all your vehicles 2. Vehicle Identifier Displays the name of the current vehicle being viewed 3. Request Position Selecting the Request Position button will return the latest position of the vehicle currently selected 4. Refresh Slider Toggle on/off to disable the map auto refresh function 5. Command & History Command and History view 6. Map Map area Note: If you have more than one vehicle on the account, when you go to the map page you must select the cross-hair next to the vehicle under vehicle list to interact with that specific vehicle. Otherwise, when you first arrive on the page, you will see an overview of all the vehicles on the map and will not be able to send commands to any of the vehicles until one is selected. DR100 - USER GUIDE 11 Command and History Functions The Command and History view provides you with a list of commands you can push to the vehicle along with the current and previous messages from the vehicle. Command that can be sent to the vehicle:

Request Position The History section can display either the latest list or previous list of messages the vehicle has reported back to the site. Note: The vehicle icon and key icons on the map are color coded:

Blue = Ignition Off when last location was reported Green = Ignition On when last location was reported Anytime you click on the Vehicle label on the map it will display:

Latitude/Longitude Status of the vehicle (Stopped or Moving) DR100 - USER GUIDE 12 Map View You can toggle between the standard map view and satellite view by selecting the option on the top left of the map. To zoom to street view, drag and drop the pegman icon ( ) to the desired location and drop. You will see an estimated address based off of the latitude and longitude of the vehicle and the vehicle icon where the vehicle should be. DR100 - USER GUIDE 13 FCC Requirement Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. DR100 - USER GUIDE 14

DR-1@@ COMMUNICATION / GPS MODULE Mount with the base (this side) downwards and keep the top cover clear of any metal surfaces BLUE LED * RAPID FLASH - SEARCHING GPS * DOUBLE FLASH - 3D LOCK

[a] a RED LED * SINGLE FLASH - FOUND NETWORK s * DOUBLE FLASH - COMMUNICATING an 0 ae | GSM FCC ID: 2ASRL-DR100 Contains FCC ID: XMR201910BG95M3

; Version: 1/8.06 SERIAL: DR 325C39DD 962/22 JIG 7

Antenna Test Report Index:

1. Overview 2. Revision History 3. Test Item &Equipment 4. Matching Circuit 5. 6. S Parameter Test Active Test 7. Conducted Emission Test 8. Environmental Processing Project NameDR-100 COMMUNICATION / GPS MODULE Author:Yang Yongcheng Update: 2020

-01-15 Address:410, Block A, Fenghuang Zhigu Building, No. 50 Tiezi Road, Xixiang Street, Bao'an District, Shenzhen Confidential Data Project overview OverView CUSTOMER NAME QT Solution PTY LTD PROJECT NAME DR-100 COMMUINCATION / GPS MODULE Items Details FREQUENCY 2400MHz-2500MHz PROJECT TYPE FPC antenna ANTENNA SPACE FEED & GROUND PAD SENSITIVE ELEMENTS ANTENNA TYPE Max antenna gain pifa 0.5dBi OTHERS Confidential Data Records of historical reports Revision History Date Revision Author Description of changes 2021-01-

15 A Yang yongcheng Antenna passive test report Confidential Data Test Item & Equipment List Test Item 1.S Parameter VSWR, Return Loss Equipment Agilent VNA 2.Active Test TRP, TIS Agilent 8960 RayZone1800 3.Passive Test Gain, Efficiency, Pattern Agilent E5071C Confidential Data VSWRBT 2021/1/15 Confidential Data PASSIVE TESTGain and Efficiency Efficiency_Pcent Gain

y c n e c i f f i E 45 40 35 30 25 20 15 10 5 0 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 FrequencyMHz B d n a G i 0.6 0.5 0.4 0.3 0.2 0.1 0

-0.1 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 FrequencyMHz Confidential Data 3D Antenna Radiation Pattern Confidential Data 2D Antenna Radiation Pattern Confidential Data BT Antenna 2400MHz-2500MHz FPC TYPE

/No glue is needed here

QT Solutions PTY LTD Date: January 16, 2024 Product Model Number: DR100 FCC ID2ASRL-DR100 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:

Testing Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Hugh Thibaud Contact Listed on FCC Wesbite Title: Director Email: hugh.thibaud@gmail.com Telephone: +64 211 874770 On behalf of: QT Solutions PTY LTD Effective Date: April 2, 2020 Revision Date:

QSF 7.6.4-8 Agent Authorization Letter Template Revision: 0 Page 1 of 1

QT Solutions PTY LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2ASRL-DR100 To Whom It May Concern, Date: January 16, 2024 Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:Hugh Thibaud Title:Director

Address19 Coastal Promenade,Point Cook,Victoria,3030,Australia FRN:0028331619 QT Solutions PTY LTD Date: 2024-01-18 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT: FCC Application for FCC ID: 2ASRL-DR100 QT Solutions PTY LTD certifies that, as of the date of the filing of the application, QUANTAM TECHNOLOGIES is our designated U.S. agent for service of process for the above referenced FCC ID. QT Solutions PTY LTD accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. QUANTAM TECHNOLOGIES accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for representative on behalf of the Applicant noted below for all future FCC ID certification. Designated U.S. Agent Information:

Name: QUANTAM TECHNOLOGIES Address: 25 Mauchly, Suite 309, Irvine, CA 92618 FRN:0034769240 Contact Person: Tracey Abrams Tel.: +1 949 351 1381 Email:

traceya@webhousegroup.com Sincerely, Signed on behalf of QT Solutions PTY LTD Signed on behalf of QUANTAM ECHNOLOGIES Name: Mr Hugh A Thibaud Name:Tracey Abrams Title:Director Title:CEO Date: 2023-12-28 Date:2023-12-28

QT Solutions PTY LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: January 16, 2024 FCC ID: 2ASRL-DR100 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing QT Solutions PTY LTDcertifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing QT Solutions PTY LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Applicant: QT Solutions PTY LTD Address: 19 Coastal Promenade Point Cook 3030 Australia Contact Person: Hugh Thibaud Tel.: +64 211 874770 Email: hugh.thibaud@gmail.com Sincerely, Signature: