FCC ID: HFS-CX03W Clover Station Pro Terminal

Congratulations on the purchase of your new Clover Station Pro Put your Station Pro together Whats included Clover Station Pro Display Clover Station Pro Terminal Clover Station Printer Pin Entry Aid

(Select Regions) Pin Shield

(Optional) Display Cable Hub Power Brick Power Cord

(Region Specific) Ethernet Screwdriver Receipt Paper 2 Clover Station Pro Install Guide EU 1.0 Put your Station Pro together Plug in the cables for your Clover Station Pro 1. Plug the Station Pro Terminal into the Station Pro Display with the Display cable. 2. Plug the Station Pro printer into the Station Pro Display. 3. Plug the Station Pro hub into the Station Pro Display. 4. Plug the power bricks circular cord into the Station Pro hub. 5. Plug the power bricks power cord into a power outlet. The Station Pro will automatically power on. 3 Station Pro Display Station Pro Printer Station Pro Terminal 2 4 1 5 3 Clover Station Pro Install Guide EU 1.0 Connect your Station Pro to a network There are three ways to connect your Station Pro to a network: Mobile (SIM) card, Wi-Fi, and Ethernet. Connect via Mobile (SIM card) 1. On the network connection screen, wait for the SIM card to verify that its connected to the mobile cellular network. 2. Once you see a message confirming the connection, tap Next. Connect via Wi-Fi 1. Tap CONFIGURE in the Wi-Fi section. 2. Select the network you want to connect to. 3. If youre connecting to a secure network, enter the password, then tap CONNECT. 4. Once youve connected to a network, tap Next. Connect via Ethernet 1. Plug one end of the Ethernet cord into the Station Pro hub. 2. Plug the other end of the Ethernet cord into a modem, router, or Ethernet outlet. 3. Your Station Pro will automatically try to connect to a network. If it does not, tap Check Connection. 4. Once your Station Pro is connected to a network, tap Next. 4 Clover Station Pro Install Guide EU 1.0 Activate your Station Pro When your Station Pro is connected to a network, an email will be sent to you containing the activation code for your device. If you are activating multiple Clover devices, each one will have its own unique activation code. Double-check the serial numbers of your device to see which activation code is needed. You can find the serial code on the activation screen. NOTE: If you cannot find the email with your activation code, check your spam folder. 1. Look for an email from Clover Support (app@clover.com). The email will be sent to the email address associated with your merchant account. If youve already set up your Web Dashboard account, you can log in to www.clover.com/home. The activation code will be listed on the top of the screen once you log in. 2. Enter the 8-digit activation code from the email using the number pad on the touch-

screen. 5 Clover Station Pro Install Guide EU 1.0 Test the Station Pro printer You can test your Station Pro printer to see if its working. If you want to skip this step, tap Continue to move on. 1. Load a roll of paper into the Station Pro printer. 2. Tap Test Print. The printer will print out a test receipt. 3. Tap Continue when you are finished. 6 Clover Station Pro Install Guide EU 1.0 Register a fingerprint You can register a fingerprint to unlock your Clover Station Pro. If you want to register a finger-

print later, tap Skip. You can register fingerprints in the Employees app. 1. Place your finger on the Station Pro sensor on the upper right corner. 2. Keep lifting and placing your finger on the sensor. 3. Once your fingerprint is registered, tap Continue. 7 Clover Station Pro Install Guide EU 1.0 Customize your device Register your owner passcode If youre activating your first Clover device, youll be prompted to create an owner passcode. You can use passcodes to provide different permissions to your employees. Your passcode can be changed in the Employees app. NOTE: You can change the employee passcode length to either 4 or 6 digits by going to your Web Dashboard and selecting Employees > Setup. 1. Enter a 4 or 6-digit passcode. 2. Re-enter the passcode to confirm it. 8 Clover Station Pro Install Guide EU 1.0 Customize your device Customize passcode and payment settings Choose whether you want to allow unlocking a device without a passcode, where you want to take tips and signatures, and if you want to accept checks as tender. You can always change these settings in the Setup app. NOTE: If you want to accept tips on printed receipts, please make sure your closeout time is at least an hour after your business has entered tips for the day. NOTE: IF you do not see an option for tips, your merchant account is not enabled for tips. Con-

tact Customer Support and request tips be enabled. 1. Select if you want to require a passcode to unlock your device. 2. Select where you want to take tips and signatures. 3. Select if you want to accept checks. You can select if you only want to accept electronic checks, both electronic and manual checks, or no checks at all. 4. Tap Continue. Tap Authorize to continue. 5. If your monthly fees have changed, you will see a screen detailing your new monthly total. 9 Clover Station Pro Install Guide EU 1.0

FCC, Request for non-disclosure

RF_501, Issue 6

Date: 16-Jul-10

Page 1 of 1

Company Name: Quanta Computer Inc.

Address:

Taoyuan City 33377, Taiwan

City:

Country:

Taoyuan City

Taiwan

No. 188, Wenhua 2nd Road, Guishan District,

Edisonstraat 12A

6902 PK ZEVENAAR

The Netherlands

To: Telefication B.V., Dept. FCC TCB

Subject: Request for confidentiality FCC ID: HFS-CX03W

Reference number: ######

Dear FCC TCB,

1. Long-Term Confidentiality

Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment

of the following materials submitted in support of FCC certification application:

Bill(s) of Material

Block Diagrams

Operational Description

Schematic Diagrams

Tune-up Procedure

Above materials contain secrets, proprietary and technical information, which would customarily be

guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of

this company confidential material to other parties could cause substantial competitive harm and provide

unjustified benefits for competitors.

2. Short-Term Confidentiality (STC)

Pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing

regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, applicant hereby requests

Short-Term Confidential treatment of the following materials (note 1):

Internal Photos

User’s Manual

Test Set-up Photos

External Photos

Justification: Ensuring that business sensitive information remains confidential until the actual

marketing of newly authorized devices.

Planned Release Date STC: 180 days (notes 2, 3, 4, 5)

Name and signature of applicant: Joyce Kuo

Date: August 03, 2021

Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier.

4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before

expiration of the STC period

RF_160, Issue 04

Quanta Computer Inc.

No. 188, Wenhua 2nd Road, Guishan District, Taoyuan City 33377, Taiwan

Taoyuan City

Taiwan

Declaration of Authorization

We

Name:

Address:

City:

Country:

Declare that:

Name Representative of agent: Jim Chang (1)

Agent Company name: SGS Taiwan Ltd.

City: New Taipei City

Country: Taiwan

Address: 134, Wu Kung Road, Wu ku Industrial Zone TW- New Taipei City 24803

is authorized to apply for Certification of the following product(s):

Product description: Clover Station Pro Terminal

Type designation: C503

Trademark:

clover

Validity/ expiry date: Dec 31, 2021

on our behalf, including signing of all documents relating to these matters.

Date: 2021/8/3

City: Taoyuan City

Name: Joyce Kuo

Function: Coordinator

Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code “owner” or the authorized agent.

WIFI Channel 12 & 13 Declaration Letter

To whom it may concern:

We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 &

13 operating capability for FCC ID: HFS-CX03W

Please

check

Product hardware does not have the capability to operate on channel 12 & 13

Product hardware has the capability to operate on channel 12 & 13.

However , these 2 channels will be disabled via software and user will not able to enable

these 2 channels

Product hardware has the capability to operate on channel 12 & 13.

And meeting KDB 594280 D01 requirement.

Pls explain detail here.

____________________________________

Others

Pls explain detail here.

Company Name: Quanta Computer Inc.

Address: No. No. 188, Wenhua 2nd Road, Guishan District, Taoyuan City 33377, Taiwan

Name / Title：Joyce Kuo / Coordinator

Signature:

Phone: 886-3-3272345#15714

Email: joyce.kuo@quantatw.com

Date: 2021/08/03

To whom it may concern, we declare below featured for equipment authorization regarding

DTS-UNII Device Declaration Letter

Date: 2021/08/03

Frequency

Band(MHz)

5150 - 5250

5250 - 5350

5470 - 5725

5725 - 5850

Active Scanning

(able to select a channel and initiate a network

by sending enabling signals to other devices)

Passive scanning

(not able to initiate a

network)

Non

Applicable

☒ Yes , ☐ No

☐ Yes , ☒ No

☐ Yes , ☒ No

☒ Yes , ☐ No

☐ Yes , ☒ No

☒ Yes , ☐ No

☒ Yes , ☐ No

☐ Yes , ☒ No

☐

☐

☐

☐

Country code selection ability - ☐ Yes , ☒ No

FCC ID: HFS-CX03W

(1) DFS Device --

☐ Master,

☐ Client with Radar detection capability

☒ Client without radar detection capability,

☐ N/A

(2)

Active / Passive Scanning

(3)

If yes, pls explain how it was implemented :

Signature:

Title / Name (Printed): Joyce Kuo / Coordinator