FCC ID: HFS-GW03 Smart Watch

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6228238.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Product Safety and Warranty Information GizmoWatch3 Health and Safety Information This section outlines the safety precautions associated with using the device. Important Safety Precautions Please read the safety and operation instructions before using your device or any accessories that came with it. Retain these instructions for future use. Do not install your device in your vehicle or use it while driving. Using your device while driving could put you and others at greater risk of an accident causing serious injury, death, and property loss. You are re-

sponsible for knowing and obeying the laws and regulations regarding the use of wireless devices in the areas where you drive. 1 This device has been tested to be IPx8 compliant. Do not operate under water. If all covers are tightly closed, device is protected against water ingress to a maximum of 1.5 meter deep for up to 30 minutes. Do not use your accessories (ex:

charger) near water (for example, near a bathtub or a sink, in a wet basement, or near a swimming pool) or spill liquid of any kind on your device or accessories as this might cause a short circuit, a fire, or an electric shock which could cause serious injury, death, and property loss. Do not use your device in the res-

ence of gas fumes as it presents a risk of fire or explosion. Do not use or store your device in extreme temperatures as your device might overheat and may present a burn and fire risk and cease to function. 2 Do not dispose of your device in a fire as this might cause an explosion resulting in serious injury, death, and property loss. Do not dispose of your device in a fire as this might cause an explosion resulting in serious injury, death, and property loss. Federal Aviation Administration

(FAA) and Federal Communications Commission (FCC) regulations prohibit using the radio of wireless devices while in the air. Turn off all wireless connections on your device before boarding an aircraft. Using your device on an aircraft might affect aircraft instrumentation, communication, and performance;

might disrupt the network; might otherwise be dangerous to the oper-

ation of the aircraft, its crew, and its passengers; and might be illegal. Do not disassemble your device. Your device contains small parts that might be a choking hazard. 3 Most modern electronic equipment is shielded from radio frequency

(RF) signals. However, certain electronic equipment might not be shielded against the RF signals from your device. Keep your device away from medical devices, including pacemakers and hearing aids, as they might malfunction and cause serious injury or death to you and others. Turn off all wireless connections on your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. Certain jurisdictions might prohibit or restrict your use of certain fea-

tures on your device. 4 Additional Safety Guidelines About Charging Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger. Do not use the charger in a high-moisture environment. Never touch the charger when your hands or feet are wet. Allow adequate ventilation around the charger when using it to operate the device or charge the battery. Do not cover the charger with paper or other objects that will reduce cool-

ing. Do not use the charger while it is inside a carrying case. Connect the charger to a proper power source. The voltage require-

ments are found on the product case and/or packaging. Do not use the charger if the cord is damaged. 5 Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. About the Battery This unit contains a non-replaceable internal Lithium Ion battery. The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, punc-

ture, or dispose of in fire or water. Important instructions (for service personnel only) Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. The battery must be recycled or disposed of properly. Use the battery only in the specified equipment. 6 Caring for the Device Taking good care of your device will ensure trouble-free operation and reduce the risk of damage to your device:

Keep your device away from excessive moisture and extreme temperatures. Do not place anything on top of your device or drop objects on your device. Do not drop your device or subject it to severe shock. Do not subject your device to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage your device. In the event of moisture condensation, allow your device to dry out com-

pletely before use. 7 The screen surface can easily be scratched. Avoid touching it with sharp objects. Non-adhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches. Never clean your device when it is turned on. Use a soft, lint-free cloth to wipe the screen and the exterior of your device. Do not use paper towels to clean the screen. Never attempt to disassemble, repair or make any modifications to your device. Disassembly, modifica-

tion or any attempt at repair could cause damage to your device and even bodily injury or property dam-

age and will void any warranty. Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your device, its parts or accessories. 8 Do not expose your device to extreme heat or direct sunlight for prolonged periods. Overheating may damage your device. Do not use alcohol or any abrasive material when cleaning the accesso-

ries. Do not expose the accessories to extreme heat or direct sunlight for prolonged periods. Store the accessories in a cool and dry place. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found 9 to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro-

tection against harmful interference in a residential installation. This equip -

ment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particu -

lar installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. 10 outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experi-

enced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. Radiation Exposure Statement The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the 11 user body or set the device to lower output power if such function is available. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all Wi-Fi products market-

ed in US must fixed to US operation channels only. 12 RF Exposure Information

(SAR) This device meets the governments requirements for exposure to radio waves. This device is designed and manufac -

tured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Commu-

nications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The limb

(10g) SAR limit set by the FCC is 4.0W/kg (Head 1g SAR 1.6W/kg).Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. 13 This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The highest reported SAR value for Limb SAR (10g) is 1.15 W/kg and the highest reported Front-

of-Face SAR (1g) is 1.19 W/kg. While there may be differences between the SAR levels of various devices and at various po- sitions, they all meet the government requirements. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid. 14 Front-of-Face SAR testing has been carried out at a separation distance of 10 mm. When using the watch near your face, keep at least 10mm of separation to ensure exposure levels remain at or below the as-tested levels. 15.19 (a)(3) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 15.21 Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 15 WEEE This device must not be disposed of as normal household waste, in accor-

dance with the EU directive for waste electrical and electronic equipment

(WEEE - 2002/96/EC). Instead, it should be disposed of by returning it to the point of sale, or to a municipal recycling collection point. Warranty Information Warranty Period The manufacturer warrants this device is free from defects in material and workmanship under normal use and service for twelve (12) months com-

mencing upon the date of purchase by the first consumer purchaser. If proof of purchase cannot be provided, the manufacture date as recorded by manufacturer based upon the serial number will be deemed to be the start of the Warranty Period. 16 Limited Warranty Statement The consumer should never attempt to open or disassemble the device and doing so may cause damage that voids your warranty. The device is equipped with an internal rechargeable battery that is non-removable. This warranty does not cover defects Resulting from improper or unrea-

sonable use or maintenance. Failure to follow operating instruc -

tions; accident; excess moisture;

insects; lightning; power surges;

connections to improper voltage supply. Unauthorized alteration or modifica-

tion of original condition. Damages caused by inadequate packing or shipping procedures. Devices purchased from unautho -

rized dealers. During the warranty period, manufac-

turer will, at its sole option and as the customers sole remedy therefore,

(using new or refurbished parts), re-

pair or replace any defective devices. 17 Repaired devices will be warranted for a period equal to the remainder of the original Limited Warranty on the original device or for NINETY (90) days, whichever is longer. All replaced parts, components, boards and equipment shall become the property of manufacturer. The warranty is good only to the original purchaser of the device during the warranty period as long as it is in the U.S. Disclaimer of Warranties;

Exclusion of Liability Except as set forth in the express warranty contained above, the pur-

chaser takes the device AS IS, and manufacturer makes no express or im-

plied warranty or any kind whatsoever with respect to the product, including but not limited to the merchantability of the product or its fitness for any particular purpose or use;

18 the design, condition or quality of the device; the performance of the prod -

uct; the workmanship of the product or the components contained therein;

or compliance of the product with the requirements of any law, rule, specifi -

cation or contract pertaining thereto. In addition, manufacturer shall not be liable for any damages of any kind resulting from the purchase or use of the device or arising from the breach of the express warranty, including incidental, special or consequential damages, or loss of anticipated profits or benefits. Manufacturer is not liable for performance issues or incom-

patibilities caused by your editing of registry settings, or your modification of operating system software. Using custom operating system software may cause your device and applica-

tions to work improperly. 19 Your carrier may not permit users to download certain software, such as custom OS. If your carrier prohibits this, if you attempt to download software onto the device without au-

thorization, you will be notified on the screen that the device will no longer operate and be instructed to power down the device. You must then con-

tact your carrier to restore the device to the carrierauthorized settings. Contact Verizon Customer Service at 800-922-0204 IEEE 1725 Battery Safety Statement Do not disassemble or open, crush, bend or deform, puncture or shred. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose the battery to fire, explosion or other hazard. 20 Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirements for Battery System Compliance to IEEE 1725. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. Replace the battery only with anoth-

er battery that has been qualified with the system per this standard, IEEE-Std-1725. Use of an unqual-

ified battery may present a risk of fire, explosion, leakage or other hazard. Only authorized service providers shall replace battery. Promptly dispose of used batteries in accordance with local regulations. Avoid dropping the Wearable Product. If the Wearable Product is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. 21 Improper battery use may result in a fire, explosion or other hazard. For Wearable products that utilize a USB port as a charging source, the Wear-

ables user manual shall include a statement that the wearable shall only be connected to CTIA certified adapters, products that bear the USB-IF logo or products that have completed the USB-IF compliance program. The Wearable product, including power supply, should not be left in the rain or subjected to exposure to water. If cleaning is necessary, do not immerse in water; wipe clean with damp cloth. The Wearable product, includ-

ing power supply, should not be dropped, crushed (stepped on) or otherwise abused. The user should be careful with the interconnect cable (wiring) between the power supply (adapter) and the Wearable product, in particular, as a potential trip hazard. C U US LISTED I.T .E E 142692 22 Informacin Sobre la Garanta y Seguridad del Producto GizmoWatch Disney Edition

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6228239.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Get to know your device GizmoWatch3TM Para la versin en espaol, visite verizonwireless.com/support. Setting Up Your GizmoWatch Charging Your GizmoWatch Before you start, charge your watch completely. 1. Line up the gold pins on the charging cord with the charging contacts on the back of the watch. The watch and charging cord are magnetized and should connect without effort. NOTE: The image is for illustration purposes only and appearance of the actual wrist strap pattern may vary. 2. Plug the other end of the cord into the charging adapter and plug the adapter into an electrical outlet. 2 WARNING: Use only approved chargers with your device. Incompatible chargers or tampering with the charging contacts could damage your device and void the warranty. Preparing Your Smartphone Download the GizmoHub app from the Google Play Store or the Apple App Store. The GizmoHub app lets you set up, call, message, find and control your childs GizmoWatch. Wearing Your GizmoWatch 1. Wrap the wristband around your childs wrist, making sure that the camera is on top of the screen. 2. Slide the wristband through the buckle and adjust for comfort (A). 3 A 3. Insert the pin on the underside of the buckle into one of the holes on the wristband (B). B 4. Slide the wristband through the loop (C). C 4 NOTE: The watch should fit snugly, but not too tightly, around your childs wrist. Swapping the Loop Strap NOTE: Additional loop straps are supplied in three different colors: orange, green, and blue. 1. Pull the release knob all the way in the opposite direction (A). A 2. Detach the wristband from your GizmoWatch (B). B 5 3. Remove the loop strap from the wristband (C). C 4. Replace the loop strap (D). D 6 Replacing the Wristband 1. Insert the pin (the opposite side of the release knob) into the pin hole on your GizmoWatch (A). A 2. Pull the release knob all the way in the opposite direction and align the other end of the pin with the hole on your GizmoWatch (B). Release the knob to lock the wristband in place. B 7 Turning Your GizmoWatch On and Off To turn your watch on, press and hold the Power button until the screen lights up. button until you see To turn it off, press and hold the Power POWER OFF WATCH? on the screen. Then tap watch. to turn off your Activating and Pairing Your GizmoWatch Follow the instructions in the app and on your GizmoWatch to complete setup. 8 Using Your GizmoWatch NOTE: Screen images and icons are for illustration purposes only and may differ from the actual device. Adjusting the Volume Swipe to the left from the Watch screen until you see the Settings Menu. Tap to go to the Volume screen. Then drag around the circle to adjust the volume levels. Alternatively, you can use the bottom Increase (+) or Decrease (-) volume controls. 9 Making a Call 1. From the Watch screen, swipe left to open the Contact List. Then select the contact you want to call. 2. Tap to make audio call. 3. Tap to make video call. NOTE: Your GizmoWatch can only make and receive calls from phone numbers on your childs Contact List. These numbers may be for mobile phones, landlines, and other Gizmo devices. You can manage the Contact List in the Gizmo Hub app. 10 Receiving a Call When someone from your childs contact list calls the GizmoWatch, it will ring and the caller name will be shown on the screen. To answer the call, tap To reject the call, tap

. To end the call, tap

. TIP: To adjust the volume during the call, tap

. NOTE: Making and receiving calls and messages requires a network connection. 11 Sending a Message 1. From the Watch screen, swipe left to open the Contact List. Then select the contact you want to message. 2. Tap to create a new message. Then:

To create a voice message, tap

. To choose from a list of pre-

. written messages, tap To send a emoji, tap

. 12 Receiving a Message When the GizmoWatch receives a new message, it will appear on the Home screen. To reply, tap the contact. NOTE: Your GizmoWatch can only receive messages from contacts with the GizmoHub app or from other Gizmo devices if the sender is a GizmoBuddy. It cant receive messages from non-Gizmo devices. 13 Additional information Your wireless device and third-party services Verizon is the mobile carrier associated with this wireless device, but many services and features offered through this device are provided by or in conjunction with third parties. Verizon is not responsible for your use of this device or any nonVerizon applications, services and products, including any personal information you choose to use, submit or share with others. Specific third-party terms and conditions, terms of use and privacy policies apply. Please review carefully all applicable terms, conditions and policies prior to using this wireless device and any associated application, product or service. 15 14 2022 Verizon. All Rights Reserved.

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6228374.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Quanta Computer Inc. NO.188, Wenhua 2nd Rd., Guishan Dist., Taoyuan City 33377, Taiwan TEL: +886-3-3272345 / FAX: +886-3-3961334 Date: September 13, 2022 We, Quanta Computer Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: HFS-GW03 If you should have any question(s) regarding this declaration, please dont hesitate to contact us. Thank you!

Joyce Kuo / Director Quanta Computer Inc. Tel: +886-3-3272345 Fax: +886-3-3961334 E-mail: Joyce.Kuo@quantatw.com