Laser Wireless Presenter
#590 Features Wireless Keyboard ,Mouse, Media Player Quick Time Remote Controller for PC and Mac With integrated Green Laser Pointer
- Best mate for PC PPT/ Mac Keynote/Mac PPT
- Integrated Green laser pointer
- Multimedia remote control - Windows Media Player
- Quick Time
- Rechargeable lithium battery embedded, save you US$100 battery cost and green environment design
- RF operation distance up to 30 meters ( open space)
- Page up / page down
- Wireless keyboard ( Play/Esc ) & (Screen blank)
- Sensor Wireless Mouse control
- USB 2.0 connection, plug & play
- No software down loads & driver installation required
- Dual color LED as function indicator
- Power- saved on/off switch
- Nano USB receiver Functions View Icon No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Function Mouse left key Mouse right key Laser Page up Page down Screen Blank Esc/ F5 Optical mouse Screen Size Mute / restore Laser Volume up Volume down Fast forward Rewind No Icon 16 17 18 19 OFF ON 20 21 22 23 24 25 26 LED(Green) 27 LED LED(red) 28 Function Optical mouse Power switch Mouse / PPT WINDOWS / MEDIA PLAY QUICK TIME PLAY PC Mac Keynote Mac PPT USB charger Charging status display laser ON Power on / code calibration / low power display Nano receiver How to operate Mouse/ Power Point / Keynote How to operate Multimedia LR-22R LR-22R Navi LR-22G LR-22G Navi Preparing for Use 1. Before operation, please take out the Nano receiver on the back, as shown in the figure. Take out Nano USB 2. Please first select PC / Mac keynote / Mac PPT 3. Then plug the receiver into the computers USB slot, as shown in the figure. Computer Receiver
(Please confirm whether the computer interface and software is complete before operating, confirm that the functions supported by this device function properly). 4. Slide the switch to the ON position, the LED on the top of LR-22 flashing for 1~2 seconds 5. Press any key to confirm whether the transmitter and receivers one-on-one code calibration is functioning properly. If not, please follow the Frequency Search. Note: When you set it to a wrong step and use this product, malfunctions will occur. For example: If you set it to use on PC and used it on a Mac computer, the function keys will malfunction. Specifications RF transmission / Range : 2.4G / 30 meter ( in open space) USB interface : USB 2.0 OS supported : Windows 7,XP, 2000,98 OS Mac 9.0 or later Wavelength
: Green:532nm Red:630~680nm Power : Lithium battery x 1pc Battery burn time : 5 hours Output power : CLIIIa < 5mW , CLII < 1mW Dimensions : 11.5(L) x 4.28 (W) x 2.75(H)cm Weight : 62g Warning: Laser radiation is harmful to the eyes. Do not stare directly into the beam. Note: Please follow the user manual to operate / adjust this device, otherwise it is possible to be exposed to harmful radiation. How to re-charge the battery USB Dual-color display LED displays charging Computer LR22 lithium battery can be charged over 500 times. Please follow the steps to re-charge the battery 1. Plug the included USB cable one end into the USB drive and the other end into the LR22 products USB slot (when the LED on the side shows red, this means that it is charging). 2. When the battery is fully charged, the LED on the side will show green;
remove the USB cable to finish charging. 3. When battery power low, the LED in the front flashes for about 3~6 seconds, this is to remind you insufficient power in the lithium battery, please charge it as soon as possible. 532 Frequency Search Should the receiver not respond to the transmitter (LR-22) after installing the driver, please use the following procedure to reset the transmitter 1. Plug the USB receiver into the USB port, suggest to keep USB receiver and transmitter within 30cm distance. 2. Simultaneously press function keys 2 & 6, the LED on the top of the transmitter
( LR22) starts flashing 3. Release function key 2 & 6 4. When LED stops flashing, the frequency reset is done NO. 6 key Code matching LED indicator NO. 2 key 30CM Receiver Computer Usage and Related Information 10