Quick Start Guide GPS MESSENGER C2 Install the APP Find and install the RadacatCom APP in the Google Play or Apple App store. Create your account Open the RadacatCom APP and register an account. Activate your Radacat C2 device Press the power button for 3 seconds to power on your C2. Enable Bluetooth on your phone. Follow the simple in-app steps to activate your C2. Your C2 is now ready to use!
Note: For more features, please refer to the user manual inside the APP Help section or visit radacat.com C2-Quicktart-20190617a.indd 1 2019-06-17 11:44 Increase the separation between the equipment and receiver. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ-
ing interference that may cause undesired operation. RF Exposure Information FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the head with the minimum separation distance of 0mm is 0.640W/Kg. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/
oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2AS98C2 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables auxappareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :(1) lappareil ne doit pas produire de brouillage, et(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre lefonctionnement. This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your body. This device and its antenna(s)must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme aux limites dexposition DAS incontrle pour la population gnrale de la norme CNR-
102 dIndustrie Canada et a t test en conformit avec les mthodes de mesure et procdures spcifies dans IEEE 1528 et IEC 62209. Cet appareil doit tre install et utilis avec une distance minimale de 0 mm entre imetteur et votre corps. Cet appareil et sa ou ses antennes ne doivent pas tre co-localiss ou fonctionner en conjonction avec tout autre antenne ou transmetteur. C2-Quicktart-20190617a.indd 2 2019-06-17 11:44 Connect to your smart phone 1.Login at http://www.radacat.ca/, or scan QR Code below to download free Radacat App on your smart phone (available on Android and IOS). 2.Turn on Bluetooth function on your smart phone then press the On/O button on Radacat device. Open the Radacat App with your smartphone and tap Click here to scan device. Using the scan function, align your phone camera directly above the Radacat device to initiate Bluetooth pairing. 3.Once the Bluetooth connection is established, you will be able to communicate with other users with text or voice messaging, you will also be able to share your whereabouts by using the location sharing function.Tap open Manual under Meon Radacat App to learn more. Get to know your device Operating Your Device On/O Button Hold down Single press Function Power o Power on Double press Display devices ID Code.
(Tap open My Device under Me on App to check device number. The last 3 digits should match with your device ID Code). Screen Instructions:
Action Hold the button for 3 seconds Press button once Press button twice quickly Charging Status Device initating Not connected to smartphone Sending/
Receiving message Device ID Code Successful connection Battery Status 100% power 75% power 50% power Relative Parameter 25% power critical power Product Specications Product Specications:
Screen: OLED Display Bluetooth: Bluetooth 5.0 Battery: 1350mAh Sensor: Temperature Sensor Charging Port: Micro USB Transmitted Power: less than 1 W Battery Type: Lithium-ion Weight: 55g Dimension: 109*39*14mm Operating
-20 60 Temperature:
Operating Range:
up to 6km in open area Caution Location hazard:
To ensure safety of the user, do not use the device near hospitals, pacemakers, on the plane, or any other areas /times that restrict the use of electronic devices. Do not use near gas stations or any other inammable environments (areas that might contain inammable gas, gun powder, or other ammable substances). Do not use in areas/times that restrict wireless electronic products. Device Malfunctions (signs of smoke, smell, heat etc) Immediate stop using the product if you discover signs of smoke, unusual smell, heat or other unusual state from the device. Turn o the areas that might contain ammable substance to avoid re disasters. Please contact Radacat customer service to receive instructions. Other cautions:
Do not dissemble or customize the device. Do not emerge device in water, or burn the device. Do not strike, throw or put pressure on the device. Always use the designated charger to charge the device, check the voltage and amperage on your charger. Do not leave device in direct sunlight or damp environments for long periods of time. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate this equipment.