FCC ID: SZR-HD6-1200W Digital Video Recorder

User Manual For Digital Video Recorder

(Model HD6-1200 and HD6-1200W) 1 -10 Notice The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without any notice. The purpose of this manual is to kindly aid the user for the operation for our Digital Video Recorder

(Hereinafter referred to as DVR). The user should have a basic understanding of computer operation and basic knowledge of how to connect peripherals and make some settings. Guarantee & Warnings 1) Electrical Apparatus Safety This DVR equipment has been tested and found to comply with the limits pursuant to title 47 part 15 subpart E of the FCC rules. All installation and operation should comply with local electrical safety norms. 2) Transportation 3) transportation, storage and installation, please avoid heavy stress, violent In the process of vibration, impact and water splashing. Installation Install the equipment in accordance with the requirements, handle carefully. Do not heavily press the equipment before the equipment installation is finished. 4) Requirements on Engineers & Technicians All the work of checking and maintenance should be done by qualified technicians and engineers. We do not undertake any responsibility caused by unauthorized modifications. 5) Requirements on Environment The equipment should be installed and stored in a cool and dry place, away from direct sunlight, flammable or explosive substances, etc. Keep gaps not less than 3cm around the equipment to facilitate ventilation for cooling. 6) Accessories Make sure to use accessories from the manufacturer recommended in the attachment. Insulate circuit ground and metal shell for all the peripherals. Before installation, please open the package and ensure that all parts are included. If there are any problems, please contact us as soon as possible. 2 - 10 1. PRODUCT CHARACTERISTICS 1.1. OVERVIEW HD6-1200/HD6-1200W is developed from the brand new platform N9M, which is an advanced and function-

extensive Mobile Digital Video Recorder specially designed for network high definition, analog audio & video input and excellent extension. It uses high-speed processor and embedded operating system, patented file important data, combining with H.264/H.265 video system 5.0 to ensure the safety and integration of compression/ decompression technology, network technology and GPS locating technology. It can implement AHD 1080P and 720P high definition, IP camera 5MP, 4MP, 1080P and 720P high definition, WD1, WHD1, WCIF, D1, HD1, CIF video recording and vehicle driving information recording, as well as wireless data upload. With video center software it also achieves alarm linkage central monitoring, remote management and playback analysis. flexible installation, easy maintenance and high reliability. 1.2. SPECIFICATIONS is powerful with modular design, It Function Overview System OS Control Mode Input Output Video Total Resource Preview, Recording, Playback, Network transmission, Locating Linux Easy Check, Network, Mouse, web browser 8 channels AHD+ 4 channel IPC 1 channel (RCA) PAL: 8*720P@25FPS (AHD) +4*1080P@30FPS (IPC) Or 8*1080P@12FPS (AHD) +4*1080P@30FPS (IPC) NTSC: 8*720P@30FPS (AHD)+4*1080P@30FPS (IPC) Or 8*1080P@15FPS (AHD)+4*1080P@30FPS (IPC) Audio Display 12 channels (4 channel IPC audio input) 1 channel (RCA) Video Signal Standard Electrical level: 1Vpp Impedance : 75 NTSC/PAL Optional Input Output Audio Signal Standard Electrical level: 2Vpp Input impedance: 4.7k Display Split OSD Operation Interface Video/Audio Compression 1-12 adjustable GPS information, alarm, license plate, speed, date/time Semi-transparent GUI Video: H.264 /H.265 Audio: ADPCM PAL:

1080P, 720P, WD1(928X576), WHD1(928X288), WCIF(464X288), D1(704X576), HD1(704x288), CIF(352x288);

NTSC:

1080P, 720P, WD1(928X480), WHD1(928X240), WCIF(464 x240)D1(704 x480)HD1(704 x240) CIF(352 x240) Image Resolution Recording 3-10 Digital:

3MP(2048 X 1536), 4MP(2560 X 1440), 5MP(2560 X 1920), 1080P(1920X1080), 720P(1280X720) 1-8 levels adjustable (1 is the best) Image Quality Boot up/Schedule/Alarm 0-5 minutes 0-30 minutes Recording Mode Pre- recording Post-recording Mirror/Dual Recording Support Playback Channel Search Mode WIFI IPC Ethernet (Back) Ethernet port (Front) GPS Hard disk + SD card USB SD SIM Sensor Panic RS232 RS485 J1939 AUX ESATA Input Max Power 116W Single/Multi-channel playback Date/time, channel, event 802.11b/g/n (2.4GHz and 5.8GHz) 4 x10/100 M RJ45 ports 1 x10/100M RJ45 port(Connect to PC for testing) Location tracking, speed detection and time sync 1 x HDD + 1 x SD card 2 x USB2.0 (Type A) + 1 x USB2.0 (Type B) 1 x SD slot 1 x SIM slot 8 inputs, 2 outputs 1 x Panic 1 x Extend GPS interface 1 x ACC 2 x CAN 2 x DC12V/1A Output 1 x EXT HDD DC8-36V Playback Network Locating Storage Interface Power Physical Characteristic Environment Consumption Standby Power Consumption Dimension

(L W H)(mm) Weight Operating Temperature Operating Relative Humidity 0W 320.5 x 187.4 x 101.5mm 3.2 Kg (Without HDD)

-10~ +60; -40~ +60(With heater) 8%-90% (No Condense) 4-10 1.3. DIMENSION Unit: mm 5 - 10 1.4. PANEL INTERFACE Front panel Serial No. 1 2 3 4 5 6 7 8 9 10 11 Print AUDIO VIDEO PWR HTR REC FLT ALM VLOSS USB RJ45 WAKE Description Audio out Video out Power LED Heater LED Recording LED Fault LED Alarm LED Video loss LED 2 x USB 2.0 1 x 10/100/1000M RJ45 Wake Button 6 - 10 Rear panel:

Serial No. Print 1 Power CAM9-12 2 USB 3 EXT HDD 4 5 CAMERAS WIFI 6 GPS 7 8 INPUT J1939 9 AUX 10 11 PANIC ACC 12 13 GPS Description DC8-36V power input IP Camera input 9~12 USB2.0 port (Type B/ to connect fire proof box) ESATA Connector AHD A/V input 1~8 WIFI 1-2 antenna port (2.4GHz & 5.8GHz) GPS antenna port Sensor input 2 x CAN Ports 2 x DC12V/1A Out Ports 1 x Panic Port 1 x ACC Port 1 x Extended GPS Port 7-10 2. FREQUENTLY ASKED QUESTIONS 1) The system cant start?

Usually this problem results from the incorrect power connection. Please follow below steps to check the power connection:

1. Check the input power, whether the power wire is connected correctly, whether the ground wire is connected back to the battery, and whether the fuse on the power wire is in good condition. 2. Check whether the ACC signal wire input to the power is with voltage higher than 7 V. 3. Check whether the equipment key is closed. 2) The DVR restarts uninterruptedly?

Please follow below steps to check it:

1. Check whether the voltage of DVR equipment is insufficient. If the voltage is less than the start-up voltage of the equipment, the equipment would always restart. 2. The problem in hard disk/SD card may cause the failure to start. Take off the storage part and check whether it is broken down. 3) The DVR cant record?

Usually, this problem results from the storage disk or camera. Please follow below steps to check it:

1. Check whether the storage disk is installed, whether it is in good contact, and whether the disk can be read normally in computer. 2. Check whether the storage disk is formatted. The storage disk should be formatted before normally storing record files. 3. Check whether there is video signal input into the equipment from camera, and whether there is video/image on the screen. 4) There is no voice in record file?

Please follow below steps to check it:

1. Check whether there is an external pickup, or whether the camera features with the function of audio collection. 2. Access to Video Channel Settings, check if Audio is set on. 3. There must be video input into the channel for recording and it must record normally. 5) The GPS works abnormally?

Please follow below steps to check it:

1. Check whether the GPS antenna is installed correctly. There is a silk print logo on the GPS antenna holder behind the host equipment. 2. Check whether the antenna receiver is sheltered. It should not be covered by any stuff, which may cause it not to receive signals. 3. Environmental influence such as tree shades, being inside tunnel, driving near tall building or loss or elevated roads, thunderstorms or other weather influence, etc. can also cause signal receiving wrong signals. 6) The DVR cant shutdown in ignition switch mode?

Please follow below steps to check it:

1. Check if the ACC line connection mode is correct; and check whether there is voltage on ACC yellow line when the key is turned off. 8-10 2. If the equipment has been set with schedule recording, it cant shutdown if it is still during recording time of the task table. 7) How to install the WIFI antenna?

The antenna must be installed on unobstructed place of the roof, and be fixed with glue. 8) The DVR cannot be shut down when in ignition ON/OFF mode. Check if the ACC signal wiring is correct and if there is voltage for ACC signal line after the key is turned off . If you have set timing recording, and at the current time it is still in task recording, the equipment may be impossible to be shut down. 9) GPS anomaly. Check if the GPS antenna is properly installed. There is silkscreen GPS identification on the GPS antenna pedestal on the back of the DVR equipment. Check if the antenna connector is blocked and make sure the antenna connector not be covered by other things. Trees block, being inside the tunnel, driving near tall buildings or viaduct, thunderstorms and other environmental effects may also cause to receive no GPS signal or error signal. 10) No voice in video files. See if there is an external microphone, or if the camera cannot capture audio;

Enter into the video channel settings, then check if the audio is open;

Ensure video input and normal recording, on which the audio recording channels must be based. 11) The DVR doesnt record. Make sure the storage part is installed and of fine contact, the data can be read on PC, and the storage equipment is not formatted. Check if there are video signal input to the main equipment, and whether there are video images in the channel pictures. 12) Why has the DVR always been in a state of restart?

Check whether the DVR equipment voltage is insufficient. If the equipment voltage does not reach the start voltage, the equipment will restart. Hard disk or SD card may cause the DVR equipment unable to start. You need to remove the storage equipment and then boot up to verify whether it is caused by the storage equipment. 13) Why the DVR cannot start?

Check the equipment input power to see if the power wiring is correct, if there is ground wire connected back to the battery, and if the fuse of the power wire is in good condition;

Check whether there is voltage(more than 7V) on power input ACC signal wire;

Check whether the hard disk key is turned off. 14) What is the log in user name and password for new DVR?

15) The default user name and password are both admin. The equipment password can be set as empty. In the ON/OFF of basic settings, the low voltage protection is 8V, why?

After testing, when the battery is lower than 8V, the voltage will lower down quickly. Therefore the lowest voltage is set to be 8V. When it is lower than 8V, the DVR equipment will recognize it as external power-off and then enter into shutdown state. 9 - 10 3. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital equipment, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help This equipment complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this equipment may not cause harmful interference, and (2) this equipment must accept any interference received, including interference that may cause undesired operation. 4. RF Exposure Statement To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. 10 -10

Radio Engine eering In ndustrie es Inc. Section 2.911(d)

)(5)(i) Ce ertificatio on Equi ipment T Type Company n Address: 65 Product Na FCCID: SZ Model(s): H name: Radio 534 L Stree ame: Digital R-HD6-120 HD6-1200, H 00W W HD6-1200W o Engineeri et, Omaha, Video Rec ing Industrie Nebraska, 6 order es Inc. 68117 Unite ed States 2.911(d)(5)

)(i) Equipm ment Type We, [Radio authorizatio Pro Iden o Engineerin on is sough hibited from ntified as an ng Industrie t through ce m receiving n equipmen s Inc.] (the ertification i an equipme nt type in the e applicant) s not:

ent authoriz e Covered zation pursu List NOTE 1

) certify that t the equipm ment for wh ich uant to 2.9 903; of the F FCC rules. Yours since erely, Name: Mich hael Lekovi ich D Date: Oct. 24 4, 2023 Signature:

Title and Co ompany na me: Vice P NOTE 1 resident Pu urchasing / R Radio Engin neering Ind ustries Inc. Covered List https://www.fc

; is the List o cc.gov/supplyc chain/covered list of Equipment a and Services C Covered By S ection 2 of Th e Secure Netw works Act, ava ailable at References;

1) 986446 D0 01 Covered Eq quipment v01 https://apps.fc cc.gov/oetcf/kd db/forms/FTS SearchResult tPage.cfm?sw witch=P&id=32 5672 2) Federal Re egister docume ent 2022-2826 63 published o on 02/06/23 https://www.fe ederalregister. gov/documen nts/2023/02/06 6/2022-28263/

/protecting-ag ainst-national-

-security-threa m ats-to-the-com munications-s supply-chain-t hrough-the 2. 911(d)(5)(i)Eq quipmentTypeA 2 Attestationv1.2

Radio Engine eering In ndustrie es Inc. Section 2.911(d)

)(5)(ii) Ce ertificatio on App plicant (C Covered L List ) Company n Address: 65 Product Na FCCID: SZ Model(s): H name: Radio 534 L Stree ame: Digital R-HD6-120 HD6-1200, H 00W W HD6-1200W o Engineeri et, Omaha, Video Rec ing Industrie Nebraska, 6 order es Inc. 68117 Unite ed States 2.911(d)(5) We, [Radio application 1.50002 o

)(ii) Applica o Engineerin

, the applica of this chapt ant filing ng Industrie ant is not id ter, as an en s Inc.] (the dentified NO ntity produc e applicant) OTE 1on the cing covered

) certify that Covered Li d communic t, as of the st NOTE 2, e cations equ date of the stablished p uipment. filing of the pursuant to Yours since erely, Name: Mich hael Lekovi ich D Date: Oct. 24 4, 2023 Signature:

Title and Co ompany na me: Vice P resident Pu urchasing / R Radio Engin neering Ind ustries Inc. NOTE 1 Delete option NOTE 2 not applicable e to this applic cation. Covered List https://www.fc

; is the List o cc.gov/supplyc chain/covered list of Equipment a and Services C Covered By S ection 2 of Th e Secure Netw works Act, ava ailable at References;

1) 986446 D0 01 Covered Eq quipment v01 https://apps.fc cc.gov/oetcf/kd db/forms/FTS SearchResult tPage.cfm?sw witch=P&id=32 5672 2) Federal Re egister docume ent 2022-2826 63 published o on 02/06/23 https://www.fe ederalregister. nts/2023/02/06 6/2022-28263/

/protecting-ag ainst-national-

-security-threa m ats-to-the-com munications-s supply-chain-t gov/documen hrough-the 2.911(d)(5 5)(ii)ApplicantA 3 Attestationv1.3

Rad dio E Engine eerin ng Ind dustri ies In nc. Agen nt Auth horizat tion Com mpany: Rad dio Enginee ering Indust tries Inc. Add dress: 6534 4 L Street, O Omaha, Ne braska, 681 117 United States Pro oduct Name e: Digital Vi deo Record der Mod del Numbe er(s): HD6-1 1200, HD6-

1200W Pro oduct Desc ription: Dig gital Video R Recorder We act authorize M on our beha MiCOM Lab alf on all ma bs Inc., 575 atters conce Boulder Co erning the c ourt, Pleasa certification anton, Califo of above na ornia 94566 amed equip 6, USA, to pment. We and issu our declare tha d certificatio ues concern behalf shal at MiCOM L n of equipm ning the app ll have the s Labs Inc. is ment to the r proval applic same effect allowed to f regulatory a cation. Any t as acts of forward all i agencies as and all acts our own. information s required a s carried ou related to t nd to discu ut by MiCOM the approva ss any M Labs on al Sig nature:

Date:

Oct. 24, 20 023 Nam me:

Michael L Lekovich Title e:

Com mpany:

Vice Pres sident Purc chasing Radio Eng gineering I Industries Inc.

Radio Engineering Industries Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: SZR-HD6-1200W Date: Oct. 24, 2023 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software security requirement In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Michael Lekovich Title: Vice President Purchasing

Radio o Engi neerin g Indu stries Inc. Mo odel Di fferenc ce Dec claratio on To W Whom It May y Concern, We, Num only Radio Engin mber: HD6-12 y model name neering Indu 200, HD6-12 ed different. stries Inc. (D 200W; All mo Test sample Digital Video odels the fun e model: HD6 Recorder); T nction, softwa 6-1200. Trade Mark:

are and elect tric circuit ar

, Model e the same, Plea ase contact m me if you hav ve any quest tion. Sig nature:

Date:

Oct. 24, 20 023 Nam me:

Michael L Lekovich Title e:

Vice Pres sident Purc chasing

Radio Engineering Industries Inc. Section 2.911(d)(7) USA Agent for Service of Process Company name: Radio Engineering Industries Inc. Address: 6534 L Street, Omaha, Nebraska, 68117 United States Product Name: Digital Video Recorder FCCID: SZR-HD6-1200W Model(s): HD6-1200, HD6-1200W 2.911(d)(7) USA Designated Agent for Service of Process We, [Radio Engineering Industries Inc.] (the applicant) designate [Radio Engineering Industries Inc.]TE" for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We acknowledgeour consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledgeour acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledgeourobligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email addressfor no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: Radio Engineering Company name: Radio Engineering Industries Inc. Industries Inc. Address: 6534 L Street, Omaha, Nebraska, Address: 6534 L Street, Omaha, 68117 United States Nebraska, 68117 United States FCC Grantee Code: SZR FRN Number: 0022657514 FRN Number: 0022657514 Contact Name: Michael Lekovich Contact Name: Michael Lekovich Telephone No: 402 339 2200 Telephone No: 402 339 2200 Email: Mlekovich@radioeng.com Email: Mlekovich@radioeng.com 2.911 (d)(7)USA Agent v1.4 Radio Engineering Industries Inc. Signature: Signature:

Title: Vice President Purchasing Titl: Vice President Purchasing Date: Aug. 31, 2023 Date: Aug. 31, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https: /www. federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.4

Radio Engineering Industries Inc. FCC Software Configuration Control Declaration Date: Oct. 24, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Product: Digital Video Recorder Model No.: HD6-1200, HD6-1200W Regarding FCC Country Code Selection guidelines identified in KDB 594280 D02 v01r03. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Date: Oct. 24, 2023 Name: Michael Lekovich Title: Vice President Purchasing Signature of applicant:

FCC Software Configuration Control Declaration Rev1.0.docx