FCC ID: KE3-3003803 Dog Training Collar

() oy if Quick Start p-collar 650 0.3.0.02.650N01-28-04 Thanks for purchasing!

The dog training collar is designed to let dogs live safely, happily and get along with people more harmoniously.

()) Do not use with aggressive dogs. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certified trainer. A CAU ION Safety during on-leash training. Itis vitally important that you and your dog remain safe while learning during on-leash training. Your dag should be ona strong leash, long enough for him to attempt to chase an object, but short enough for him not to reach a road or other unsafe area. You must also be physically strong enough torestrain your dog when he tries to chase.

|) Risk of skin damage. Please read and follow the Instructions In this manual. Proper fit of the collaris important. A collar worn for too long or made too tight on the pets neck may cause skin damage ranging fromredness to pressure ulcers. This condition is commonly known as bed sores.

+ Avoid leaving the collar on the dog for more than 12 hours per day.

* When possible reposition the collar on the pet's neck every 1 to 2 hours.

+ Never connecta lead to the electronic collar; it will cause excessive pressure on the contacts.

* Ifarash or sore is found, discontinue use of the collar until the skin has healed.

* Ifthe condition persists beyond 48 hours, see your veterinarian.

* This productis nota toy, please keep away from children.

* This productis only for use with healthy dogs. Remote Mode Indication Battery Display Shock Level +

Shock Level -

. On/Off Button F. Channel Display G. Channel Conversion Switch H. Shock Level Display

|. Tone Button J. Vibration Button K. Shock Button L. Charging Port moog>

Receiver Collar P.Contact Points Q.Charging Port {with cover) R.On/Off Button

$.LED Indicator T.Contact spring sheet Setting Up the Product Before you can use the Dog Training Collar, you must set up the product as below steps:

1. Charging the Remote and the Receiver Collar. 2. Prepare the Remote and turniton. 3. Prepare the Receiver Collarand turniton. 4. Function test, test function of buttons before wearing It on dog. 5. How to use the Test Lamp, test Shock function or use as a screw driver. 6. Pair the Remote and the Receiver Collar, pair them when the product lose its code or pair for a second collar. Charging the Remote and the Receiver Collar 41. Plug in and fully charge the Remote and the Receiver collar. For the initial charge,be sure to charge it for 4 hours. Subsequent charges only take 2-3 hours. 2. When full charged, the red LED on the Receiver Collar will become green. The Battery Display of the Remote will stop cycling and appear full. 3. Please replace the rubber cover when the Recelver Collar Is full charged. Tips: 1. Excessive charging will shorten battery life. Only charge tham when batteries are low. 2. When you're not using the collar, please turn it off to increase the battery life. Note:

Please use the Output:DC 5V 500-800mA charger to charge the product. Dont use a charger that does not meet the specifications to charge the product. Prepare the Remote Turn ON/OFF the Remote 1. Long press the ON/OFF button toturnthe remote ON. 2.LCDwill be lighted, and show the information of current channel, battery power and levels. Ifnot, please charge the remote. 3. Long press the ON/OFF button to turn the remote OFF. Prepare the Receiver Please use our distribution test tool to install the contact points. You can also choose to use contact spring sheet, which make the contact more effective and more comfortable. es Turn on the Recelver Collar Press the On/Off Button the Green LED light comes on. Innormal mode, the Green LED will flash every 4 seconds, indicating the Receiver Collar is on and ready to receive a signal from the Remote. Turn off the Receiver Collar Press and hold the On/Off Button until the Red LED light shuts off

(This takes approximately 3 seconds).

* Release the On/Off Button. NOTE:

To extend the life of the batteries, please turn the Receiver Collar off when It Is not In use. Functlon Test We recommend you experience firsthand how the different levels feel on yourself and always begin at the lowest level, and increase the levels up to your personal comfort levels. 1. Place one finger over both Contact Points of the training collar. 2. Hold your remote approximately 2 ft. from the training collar. Press the Vibration Button continuously for 1 to 2 seconds. You should feel continuous vibration. 3. Press (7 to decrease lavels. Starting at level 1,press the Shock Button. 4. Increase the level until the sensation begins to feel uncomfortable. NOTE: Continuous stimulation will transmit for no more the 10 continuous seconds. To reactivate, release and repress the button. Tone: sends a tone with non-adjustable level to the Receiver Collar. Vibration: sends a vibration with non-adjustable level to the Receiver Collar. Shock: sends 1-16 adjustable levels of static stImulation to the Receiver Collar. Silde up, control dog 1, slide down, control dog 2. Press to Incraase the Shock Level. Press to decrease the Shock Level. Long press to turn on, long press to turn off. Note:

The Shock Level can be adjusted from 1 to 16 levels, please adjust it properly as per your dog's reaction.

* Itis not recommended to press and hold the Vibration/Shock Button too long to avoid physical or psychological hurt to the dog. Howto Use the Test Lamp Shock Function Test 1. Turn on the Receiver Collar. 2. Hold the Test Lamp contacts against the Contact Points (or Conductive Silicona). 3. Press the Shock Button and the Test Lamp will be lighted. It will be lighter accordingly with the Shock Level increasing. As a Screw Driver Use the Test Lamp to tighten or loosen the Contact Points when prepare the Recelver Collar. Pair the Remote and the Recelver Collar 1. Use the Bewitcn on the Remote to select Dog 1 . 2. With the Remote tumed on and the Receiver Collar tumed off, press and hold the ON/OFF Button on the Receiver Collar for 4-5 seconds. 3. The Red & Green LED will blink for about 10 seconds indicating that it is ready for pairing. 4, Press and hold Tone Button and Vibration Button at the same time for 2-3 seconds, the Green Led on the Receiver Collar will blink for 5 times indicating successful pairing. Pairing a Second Collar with the Remote 1. Use the Reutton on the Remote to select Dog 2. Then fallow the above pairing steps from 2-4. Dog Training Selecting The Contact Points and The Contact spring sheet For the best results, select the correct Contact Points based on your dog's coat. You can use the Contact point separately, or use the Contact point and spring at the same time. Collar Fitting Please fit the collar properly so that the Contact Points press firmly against the dog's skin. When properly fitted, you should be able to put a finger in between the Receiver Collar and dog's neck. Too loose: the Receiver Collar will move around the dog's neck, the Contact Points may hurt the dog's skin. Too tight: it may cause dogs to breathe hard. Caution: 1.do not shave the pet's neck as this may increase the risk of skin irritation. 2.the collar should not be worn for more than 12 hours per day. Or it may cause skin irritation. Find the Best Shock Level for Your Pet The unit comes with Up and Down buttons to control the Shock Level, with Level 1 being the lowest level and Level 16 being the highest. The level of Shock best suited for your dog depends on your dog's temperament and threshold for Shock. Always start at the lowest level and work your way up. The appropriate level can be found when the dog responds to the Shock with a mild reaction, such as a filck of the ear, a lick of the lips, a tensing of the neck muscles etc. The Shock Level may vary depending on the training situation. When highly distracted, dog's will require a higher level of Shock. Device Information Product Specification Remote: 27 days Receiver: 11 days

[20om(se4feet) 300m (984 feet) Battery Lifa(typical use) Receiver Waterproof Rating Operating temperature range Wireless Rando The unit need to be charged under any of below situations 1. The indicator light on the Receiver Collar is emitting a red color every 4 seconds or flashes rapidly. 2. The 3 bar indicator on the Remote LCD shows just 1 bar. 3. The indicator light on the Remote or Receiver Collar will not come on. 4. The indicator light on the Remote or Receiver Collar comes on momentarily when any of the Mode Buttons is pressed. Others Frequently Asked Question:

While the Vibration/Shock is unpleasant, is harmless to your pet. Electronic. training devices require interaction and training from the owner to achieve desired results. Your pet should be able to recognize basic obedience commands such as Sit or Stay.Pets should be at least 6 months old before using the Training Collar. Is the Vibration/Shock safe for my pet?

How old does my pet have to be before using the Remote Training Collar?

Once my pet Is trained and has been obeying my commands, will he have to. continue to wear the Receiver Collar?

Is the Recelver Collar waterproof?

Probably not. You may need to reinforce training with the Receiver Collar from time to time. es. But the Remote Is not waterproof.Please lalways keep it away from water. The range of the Remote Training will vary according to terrain, weather, vegetation, as well as transmission from other radio devices. WiIIl | get exactly 984 feet of range with the Remote Training Collar?

The maximum amount of time you can press the Vibration/Shock Button and deliver Vibration/Shock to your pet continuously is 10 seconds. After this, there's a time-out an Vibration/Shock cannot be delivered for 5 seconds. After the 5 second time-out period, Button can be pressed and Vibration/Shock can be delivered again. How long can!

continuously deliver Vibratlon/Shock to my pet?

Troubleshooting Guide Make sure the Receiver Collar has been turned on.

*If your range has reduced from the first time you used the Remote Training Collar, the battery(s) may be low in either the Remote or Receiver Collar.

*Terrain, weather, vegetation, transmission from other radio devices and many other factors can impact the amount of range you have with the unit.

* Test the Receiver Collar. Refer to How to use the Test Lamp for details. Increase the Shock Level. Refer to Find the Best Shock Level for Your Pet for more information.

*Make sure the Receiver Collar's Contact Points are placed snugly against your pet's skin. Refer to Collar Fitting for more information. My pet does no respond when |

press a button. The Receiver Collar will not Make sure the Receiver Collar has been charged. ial charge, be sure to charge it for 4 turn on. i se ges only take 2-3 hours. Make sure the Receiver Collar Is on.

*If the Indicator Light does not come on when any button is pressed on the remote, ensure that the batteries are charged properly. If the first two solutions did not resolve your problem, The Recelver Collar Is not responding to the Remote. 1 Warranty and repair information 1-Year Limited Lifetime Warranty The original purchaser for this unit Is provided with 1-YEAR WARRANTY. The warranty begins from the date of purchase. For the first year, coverage is for both Parts and Labor on warranty repair services. Accassories such as straps and batteries are covered for the first year only. After the first year, the Limited Lifetime Warranty covers Parts only and does not cover Labor Fees and Accessories. All shipping fees incurred, the cost of Accessories after the first year, and Labor fees associated with out of warranty repair work, are the customer's responsibility. Labor fees will be variable depending on the extent of the work required. The Limited Lifetime Warranty expires 5 years after a model is discontinued from production. To Qualify for the Warranty All products must provided a proof of purchase is required to initiate repair work under warranty. We strongly recommend keeping the original receipt. If a proof of purchase is not available at the time of service, we will estimate the age of unit by the serial number. Serial number estimates can differ from the actual purchase date. A serial number estimate is the only method of determining an approximate date of purchase without a proof of purchase. Not Covered Under Warranty We DO NOT offer warranty for products that have been bought secondhand or as a resold product. We DO NOT replace defective units or provide refunds for products purchased from us after 30 days from the date of purchase. Issues of replacement and refunds on units purchased less than 30 days from an authorized dealer must be. addressed to the dealer directly. If the products purchased from an authorized dealer are after 30 days from the date of purchase, please send the units to us for service and repair. We DO NOT cover the cost of repairs and replacements due to misuse by the owner or dog, improper maintenance, and/or lest units. 12 All replacement costs for either the remote or receiver will be the owner's responsibility. The warranty is void if the unit has been altered or an unauthorized person has damaged the unit while attempting repair work. We reserve the right to retain and discard any parts or accessories that have been found damaged upon replacement and repalr. Procedure for Repair Work If the unit is malfunctioning, please refer to the Troubleshooting Guide in the quick start before sending it back for Service. The cost of shipping products under warranty back is the customer's responsibility. We are not responsible for units damaged or lost in transition. We are not responsible for loss of training time or inconvenience while the unit is in for repair work. We do not provide loaner units or any form of compensation during the repair period. A copy of the sales receipt showing the purchase date may be required before warranty work is initiated. Please include a brief explanation outlining the problem and include your name, address, city/state/zip code, daytime phone number, evening phone number, and email address. Compliance FCC - USA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Modification or changes to this equipment not expressly approved by manufacturer may void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause 13 harmful Interference to radio communications. However, there Is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user Is encouraged to try to correct the Interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Sp FE CE x Z| MADE IN CHINA

= 3 3 5 i]

6 e o i]

= S

e 3 3 e SI &

= 3 z =

i) 2.

= Fe Ss =

o =

s=

5 3=

Ss g=

o 3 2 _ ________, 2 8 iS 4 coy PEET]ETT] ETT ETE PED EC EET] EEe Ee ETP ETE EET PTET EEE ECE TEE TET co) L Ol 02 0 OF OG 09 O02 08 0600] OL 02 0 OF OG 09 02 08 060 e

=K 0z og oy 0S 09 o2 08 06001 01 oz os oF 0S 09 0 08 0600001 oz 08 oF 0 SrTIMNUNVUCQUUONITIIOTTT TOTUATOPOANTOO TT TRPUNOTY TOPO OTORAQOTTO UNE ETETUREEEUCCONY TOU MOTE AMOO PrOU CTT

Radio Systems Corp 2024.3.26 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION EUT NAME: Dog Training Collar Trademark: Premier Pet MODEL : GDT00-17994 FCC ID: KE3-3003803 To Whom It May Concern:

We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Clients signature:

Clients name / title : Deborah J. LeMaster / Regulatory Compliance Specialist Contact information / address: 10427 PetSafe Way Knoxville Tennessee 37932 United States

Radio Systems Corp

(2024.3.27) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: KE3-3003803)

[Radio Systems Corp] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Applicant printed name) Deborah J. LeMaster Radio Systems Corp

(2024.3.27) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: KE3-3003803)

[Radio Systems Corp] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Applicant printed name) Deborah J. LeMaster

Radio Systems Corp 2024.3.26 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Dog Training Collar Trademark: Premier Pet MODEL : GDT00-17994 FCC ID: KE3-3003803 To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the

- Block Diagram

- Schematics

- Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Clients signature:

Clients name / title : Deborah J. LeMaster / Regulatory Compliance Specialist Contact information / address: 10427 PetSafe Way Knoxville Tennessee 37932 United States

Attestation Statements

(2024.3.27) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID:KE3-3003803)

(Radio Systems Corp), the undersigned, hereby authorize (Radio Systems Corp) to act as our designated U.S. agent for service of process, (Radio Systems Corp) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment.

(Radio Systems Corp) accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information Company name: Radio Systems Corp Contact Name: Deborah J. LeMaster Address: 10427 PetSafe Way Knoxville Tennessee 37932 United States Telephone No: 865-909-7296 Email: dlemaster@petsafe.net FRN: 0014529481 U.S. Agent Information:

Company name: Radio Systems Corp Contact Name: Deborah J. LeMaster Address: 10427 PetSafe Way Knoxville Tennessee 37932 United States Telephone No: 865-909-7296 Email: dlemaster@petsafe.net FRN: 0014529481 Applicant Signature: Agent Signature:

(if the agent is different from the applicant) Applicant printed name: Agent printed name: Deborah J. LeMaster Deborah J. LeMaster