FCC ID: KE3-30035901 MURS GPS Base Station

Get Started!

Unbound Customizable GPS Fence What you have:

Antenna Same wall adaptor as shown in 400-2498 Stay & Play Compact, but cord will have a different end

(see photo):

Long contact points Collar with short contact points Test light tool Base unit Base unit power adaptor Battery charger Illustrate the charger without batteries. It will have a PetSafe logo on it. What you need:

Wireless router (2.4 GHz) Phillips screwdriver High-speed internet connection Scissors Smartphone Tape measure 2 Non-metallic collar and leash (for training) Collar battery Mounting hardware Important: We do not recommend the fence system for dogs with a history of aggressive behavior. The collar may be too large for dogs under 8 pounds. How it works:

I grabbed this basic image from the app. Im thinking it would be nice for our illustration to be somewhat similar for consistency. The illustration needs to show a large property instead of our usual suburban lot. Needs to call out the base unit, collar, digital fence posts, pet area, and 25 feet between the boundary and any structures or roads. 25 feet Digital fence posts This is the symbol used for the base unit in the app. It would be nice if we could incorporate it into our illustration. Not sure we need the white ballon around it. Pet area Collar 25 feet The Unbound Customizable GPS Fence System uses GPS technology to keep your dog within a boundary you design. The system consists of three main parts: the My PetSafe app, the base unit (with antenna) and the collar. To set up the system, you will download the My PetSafe app on your phone, connect the base unit to your homes Wi-Fi network and create a custom boundary by placing digital fence posts on a map of your property. You can place up to 32 digital fence posts to create the boundary, which will be saved to thecollar. Your dog will wear the collar, and once trained, will be allowed to roam freely inside the boundary or pet area. If your dog tries to leave the pet area, the collar will sound a warning tone and then deliver a safe static correction through contact points touching your dogs neck. The static correction is designed to get your dogs attention and prompt him to return to the petarea. The base unit is the hub for communication with your dogs collar. The base unit and collar communicate with one another through a two-way radio frequency (RF) link. While the collar is within range of the base unit (about 300 feet), you can use the My PetSafe app to:

Monitor the collars battery life Change the collar correction settings If there is a power outage or your home Wi-Fi network goes out, the collar will continue to function normally and will correct your dog if he approaches the boundary. 3 Download the app and set up your fence 1 2 Create a new illustration based on this screen capture. The app will not be rebranded for quite a while so use the logo shown here. Create new illustration based on this screen capture. Highlight the Add Product button somehow. Download the My PetSafe app. Open the app and follow the on-screen prompts to create an account and sign into the app. You will need a valid email address. Once you are signed into the app, tap Add Product and then GPS Fence. Follow the on-screen prompts to:

Charge the collar battery. Find a home for your base unit. Connect the base unit to Wi-Fi. (You will need your home Wi-Fi password.) Create your dogs fence by placing digital fence posts on a map. Connect to the collar. Assign a pet to the collar. Save the fence to the collar. Use the collar to test the fence. 4 Mount the base unit 3 4 After you have set up and tested your fence using the app, finish your fence setup by wall-mounting the base unit. First, slide the mounting bracket out of the slot on the back of the base unit. With the flat side of the mounting bracket facing you, position the mounting bracket on the wall, at least 5 feet above the floor. Make sure the bracket is level, then fasten it to the wall using the provided mounting hardware. Use both screws and anchors for installation in drywall; otherwise, use screws only. Place the base unit on the mounting bracket and then slide it down to secure it. 5 Fit the collar 5 Start with image from page 5 of the NanoBark US QSG (400-2588) (it shows the collar a little higher than our other similar illustrations), update collar for Basic GPS Fence. Flip the illustration horizontally and adjust the ears on the dog so we can show the antenna at the back of the neck. With your dog standing comfortably, place the collar high on his neck, just behind his ears. The PetSafe logo should be right side up, and the collars antenna should be centered at the back of your pets neck. The contact points should be touching your dogs skin. If your dog has long or thick hair, it may be necessary to switch to the long contact points provided or trim (not shave) the hair around the contact points. Check the tightness of the collar by inserting one finger between the end of a contact point and your dogs skin. The fit should be snug but not constricting. Once you are satisfied with the fit of the collar, remove it from your dog and trim the excess strap, making sure to allow room for growth or a thicker winter coat. Important: Always remove the collar from your dog when the system is not in use. Avoid leaving the collar on your dog for more than 12 hours a day, and never attach a leash or ID tag to it use a separate collar for that. Please read the customer care guide for more important safety information about how to fit and use the collar. 6 Train your pet 6 Use first image from Fence Training Guide (401-103-1), but update collar for the Basic GPS Fence, and rmeove the training flags. With the collar powered on and close to the base unit, open your dogs pet profile in the app and choose the desired correction level: tone only or static correction levels 1 through 10. Take care to choose the best correction level for your dogs temperament. Follow the steps in the provided training guide to train your dog to understand and respect the boundary. Your dog should be old enough to recognize basic obedience commands such as sit and stay (approximately 6 months or older). Whether your pet loves rolling on his back in the grass or playing a game of fetch, the PetSafe Basic GPS Fence System will help keep him safe while he enjoys the great outdoors. Well help keep your dog safe in your wide-open space. 7 About the base unit:

Multi-purpose button PetSafe logo/power indicator Base unit Wi-Fi/Bluetooth status indicator Power jack Power adaptor 8 Button/

indicator light Function/

light color Usage/

meaning White OFF The base unit has power. The base unit does not have power. PetSafe logo/power indicator Wi-Fi/

Bluetooth status indicator Yellow, slow blinking The base unit is powered on but not yet connected to the app, Wi-Fi, or the internet. Yellow, solid The base unit is connected to the app, but not Wi-Fi or the internet. Blue, fast blinking The base unit is attempting to connect to Wi-Fi. Blue, slow blinking The base unit is connected to Wi-Fi but not the internet. Blue, solid The base unit is connected to Wi-Fi and the internet. Red, fast blinking The base unit was unable to connect to the Wi-Fi network. Mute alarm To temporarily mute the Pet out of boundary alarm, press and release the multi-purpose button. The Pet out of boundary indicator will continue to glow red until the collar is detected inside the boundary. Wi-Fi soft reset Multi-purpose button Factory reset Press and hold the multi-purpose button for 5 seconds to reset the base units Wi-Fi module but retain your Wi-Fi credentials. Press and hold the multi-purpose button for 10 seconds to erase your Wi-Fi credentials and return the base unit to factory settings. 9 About the collar:

Antenna Contact points Battery Status light Charging the collar battery To charge the collar battery:

1. Place the battery in one of the slots in the battery charger. Turn the battery so the arrow on the top of the battery points to the unlock icon. 2. Press the battery down and turn it clockwise to the locked position. 3. Plug the battery charger into a standard electrical outlet. 4. After charging, release the battery from the charger by pressing it down and turning it clockwise to the unlocked position. The slots LED will glow red when the battery is charging and green when charging is complete

(within 4 hours). Each charge can last 48 to 72 hours, depending on frequency of use. If desired, you can purchase an additional battery on petsafe.com so you can have one battery charging while the other is inuse. 10 Using the battery in the collar To use the battery in the collar:

1. Place the battery in the slot on the side of the collar. Turn the battery so the arrow on the top of the battery points to the unlock icon. 2. Press on the battery and turn it clockwise to the locked position. The collar will power on automatically. 3. When its time to recharge the battery, release it from the collar by pressing on it and turning it clockwise to the unlocked position. Understanding the collars status light During normal operation, the collars status light will flash twice at regular intervals to indicate battery status and GPS signalquality:

Color First flash (battery) Second flash (GPS) Green More than 16 hours battery life remaining GPS signal quality is good. Yellow 12 to 16 hours battery life remaining GPS signal quality is fair. Red Less than 12 hours battery life remaining No signal 11 Unbound Customizable GPS Fence Were here to help!

For questions or additional tips:

support.petsafe.com 1-Year Warranty | 2023 Radio Systems Corporation | Model: PIF00-17777 | 400-2590 For important safety instructions, please see the customer care guide.

US Tech Test Report:

Report Number:

Issue Date:

Customer:

Model(s):

FCC ID:

FCC Part 95 Subpart J 22-0066 May 11, 2023 Radio Systems Corporation RFA-621 KE3-30035901 SAMPLE LABEL Contains:

FCC ID:

2AC7Z-

ESP32WRO OM32U IC: 21098-

ESPWROOM 32U

s n i a t n o C E R E V O R W 2 3 P S E

Z 7 C A 2

D I C C F E R E V O R W P S E

8 9 0 1 2

C I Figure 1. Sample Label and Location (Bottom of EUT) Page 1 of 1

Date: 7/31/2017 AGENCY AGREEMENT Federal Communications Commission P.O. Box 429 Columbia, MD21045 Gentlemen:

By signature below, we hereby appoint US Tech employees Sandi McEnery, Alan Ghasiani and George Yang to act as our agents with regard to all FCC equipment authorizations. This appointment will remain in effect until otherwise notified. I further certify by signature below that no party (per 47 CFR 1.2002(b)) to the application is subject to a denial of Federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). This appointment includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Signature:

Name: Cindy Allen Title: Global Regulatory and Safety Manager Date:7/31/2017 Radio Systems Corporation 10427 PetSafe Way, Knoxville, TN 37932

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 16, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: KE3-30035901 Radio Systems Corporation certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Cindy Allen Global Regulatory and Safety Manager Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 865-824-5431 www.petsafe.net Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 16, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: KE3-30035901 Radio Systems Corporation certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Cindy Allen Global Regulatory and Safety Manager Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 865-824-5431 www.petsafe.net

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 16, 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: KE3-30035901 Radio Systems Corporation certifies that, as of the date of the filing of the application, we designate ourselves as the U.S. agent for service of process. Designated U.S. Agent Information:

FRN: 0014529481 Name: Radio Systems Corporation Address: 10427 PetSafe Way, Knoxville, TN 37932 Contact Person: Cindy Allen Tel.: 865-824-5431 Email: callen@petsafe.net Sincerely, Cindy Allen Global Regulatory and Safety Manager Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 865-824-5431 www.petsafe.net

FCC: USA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfal interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If interference does occur to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

+ Reorient or relocate the receiving antenna.

+ Increase the separation between the equipment and the receiver.

+ Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

+ Consult Customer Care, the dealer, or an experienced radio/TV technician for help. CAUTION: Modification or changes to this equipment not expressly approved by Radio Systems Corporation may void the user's authority to operate the equipment. IC: Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(J) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et

(2) Lutilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den comprometire le fonctionnement. WARNING: This Device must be used in such a way as to maintain at least 20 cm separation distance between the transmitter's antenna and the body of the user or nearby persons.

Request for Confidentiality Date: ___May 11, 2023_____ Subject: Confidentiality Request for: ___FCC ID: KE3-30035901 Pursuant to FCC 47 CRF 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Short Term Short Term Permanent Permanent Short Term Permanent Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent*

Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual Radio Systems Corporation has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to

"competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Sincerely, By:

(Signature/Title) ___George Yang __- Agent

(Print name)