all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.03 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Cover Letter(s) | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User Manual | Users Manual | 1.03 MiB |
OPERATING AND BASIC TRAINING GUIDE PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING Thank you for choosing SportDOG Brand training products. Used properly, this product will help you train your dog efficiently and safely. To ensure your satisfaction, please review your Operating Guide thoroughly. Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia Pty Ltd. and any other affiliate or Brand of Radio Systems Corporation may be referred to collectively as We or Us. IMPORTANT SAFETY INFORMATION EXPLANATION OF ATTENTION WORDS AND SYMBOLS USED IN THIS GUIDE WARNING WARNING This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. CAUTION, used without the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in hard to your dog. Do not use this product if your dog is prone to aggressive behaviour. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or a certified trainer. This device contains Lithium-Ion (Li-Ion) batteries; never incinerate, puncture, deform, short-circuit, or charge with an inappropriate charger. Fire, explosion, property damage, or bodily harm can occur if this warning is not followed. There is a risk of explosion if a battery is replaced by an incorrect type. Do not short circuit, mix old and new batteries, dispose of in fire, or expose to water. When batteries are stored or disposed, they must be protected from shorting. Dispose of used batteries properly. It is vitally important that you and your dog remain safe while learning during on-leash/lead training. Your dog should be on a strong leash/lead, long enough for him to attempt to chase an object, but short enough for him not to reach a road or other hazard. You must be physically strong enough to restrain your dog if he tries to chase something. This product is not a toy. Keep it out of the reach of children. Proper fit of the collar is important. A collar worn for too long or made too tight on the dogs neck may cause skin damage ranging from redness to pressure ulcers. This condition is commonly known as bed sores. Avoid leaving the collar on a dog for more than 12 hours per day. 1 to 2 hours. When possible, reposition the collar on the dogs neck every Regularly recheck the fit to prevent excessive pressure;
follow the instructions in this guide. You may need to trim the hair in the area of the Contact Points. However, never shave the dogs neck; this may lead to a rash or infection. Never connect a leash/lead to a collar with Contact Points. It will cause excessive pressure on the Contact Points. When connecting a leash/lead to a separate collar, do not allow it to put pressure on the Collar Receiver. Wash the dogs neck area and the Contact Points of the collar weekly with a damp cloth. Examine the contact area daily for signs of a rash or a sore. If a rash or sore is found, discontinue using this product until the skin has healed. If the condition persists beyond 48 hours, see your veterinarian. For additional information on bed sores and pressure necrosis, please visit sportdog.com. This product is only for use with healthy dogs. If youre not certain that your dog is in good health, we recommend that you take your dog to a veterinarian before using this product. TERMS OF USE AND LIMITATION OF LIABILITY 1. TERMS OF USE: The use of this product is subject to your acceptance without modification of the terms, conditions, and notices contained with this product. Use of this product implies acceptance of all such terms, conditions, and notices. If you do not wish to accept these terms, conditions, and notices, please return the Product, unused, in its original packaging and at your own cost and risk to the relevant Customer Care location together with proof of purchase for a full refund. TERMS OF USE AND LIMITATION OF LIABILITY (CONT.) 2. PROPER USE: Proper Use includes, without limitation, reviewing the entire Operating Guide and any specific safety information statements. The specific temperament or size/weight of your dog may not be suitable for this product. If you are unsure whether this Product is appropriate for your dog, please consult your veterinarian or certified trainer prior to use. For products used with dogs where training is desired, Radio Systems Corporation recommends that these training products are not used if your dog is aggressive and accepts no liability for determining suitability in individual cases. NO UNLAWFUL OR PROHIBITED USE: This product is designed for use with dogs only. This product is not intended to harm, injure, or provoke. Using this product in a way that is not intended could result in violation of Federal, State, or local laws. LIMITATION OF LIABILITY: In no event shall Radio Systems Corporation or any of its associated companies be liable for (i) any direct, indirect, punitive, incidental, special or consequential damage and/or (ii) any loss or damages whatsoever arising out of or connected with the use or misuse of this product. The Purchaser assumes all risks and liability from the use of this product to the fullest extent permissible by law. MODIFICATION OF TERMS AND CONDITIONS: Radio Systems Corporation reserves the right to change the terms, conditions, and notices governing this product from time to time. If such changes have been notified to you prior to your use of this product, they shall be binding on you as if incorporated herein. 3. 4. 5. FCC: USA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If interference does occur to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
CAUTION: Modification or changes to this equipment not expressly approved by Radio Systems Corporation may void the users authority to operate the equipment. Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult Customer Care, the dealer, or an experienced radio/TV technician for help. IC: Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IMPORTANT RECYCLING ADVICE Please respect the Waste Electrical and Electronic Equipment regulations in your country. This equipment must be recycled. At the end of the product life, do not place it in the normal municipal waste system. Please check the regulations in your area or return it to where it was purchased so that it can be placed in our recycling system. If these options are not possible, please contact the Customer Care Center for further information. Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 1.800.732.0144 2018 RADIO SYSTEMS CORPORATION SPORTDOG.COM 400-2249 Thank you for choosing SportDOG Brand training products. Used properly, this product will help you train your dog efficiently and safely. To ensure your satisfaction, please review this owners manual thoroughly. If you have questions regarding this products operation, please see this manuals Frequently Asked Questions or Troubleshooting sections, contact our Customer Care Center at 1-800-732-0144, visit our website at www.sportdog.com, or view our support videos at www.youtube.com/sportdogbrand. To get the most protection out of your One Year Warranty, please register your product within 30 days at www.sportdog.com. By registering and keeping your receipt you will enjoy the products full warranty and, should you ever need to call the Customer Care Center, we will be able to help you faster. Most importantly, your valuable information will never be given or sold to anyone. Complete warranty information is available online at www.sportdog.com. TABLE OF CONTENTS COMPONENTS ......................................................................................................................................3 HOW THE SYSTEM WORKS ...................................................................................................................3 ACCESSORIES .......................................................................................................................................3 KEY DEFINITIONS .................................................................................................................................4 PREPARE THE REMOTE TRANSMITTER ................................................................................................5 PREPARE THE COLLAR RECEIVER .........................................................................................................6 FIT THE COLLAR RECEIVER...................................................................................................................8 FIND THE BEST INTENSITY LEVEL FOR YOUR DOG ...............................................................................8 MATCH THE COLLAR RECEIVER AND REMOTE TRANSMITTER .............................................................9 BASIC TRAINING WITH PRO TRAINER CHARLIE JURNEY ....................................................................10 FREQUENTLY ASKED QUESTIONS .......................................................................................................18 TROUBLESHOOTING ...........................................................................................................................19 TEST LIGHT INSTRUCTIONS ...............................................................................................................19 2 1.800.732.0144 COMPONENTS THE YARDTRAINER 100 & 100S CONTAIN:
Remote Transmitter Collar Receiver Charge Cable Long Contact Points Lanyard Test Light Tool HOW THE SYSTEM WORKS The SportDOG Brand YardTrainer 100 & 100S have been proven safe, comfortable, and effective for dogs over 8 pounds. Consistent, correct use of this product allows you to reinforce commands and correct misbehavior from up to 100 yards. The Remote Transmitter sends a signal, activating the Collar Receiver to deliver a harmless stimulation. With proper training, a dog will learn to associate this signal with a command. Like all SportDOG Brand products, this model features adjustable static stimulation levels so you can tailor the stimulation level to your dogs temperament, eliminating the risk of over-correction. IMPORTANT: THE YARDTRAINER 100 & 100S HAVE A RANGE UP TO 100 YARDS. DEPENDING ON THE WAY YOU HOLD THE REMOTE TRANSMITTER, THE MAXIMUM RANGE MAY VARY. FOR CONSISTENT RESULTS AT LONGER RANGES, HOLD THE REMOTE TRANSMITTER IN A VERTICAL POSITION AWAY FROM YOUR BODY AND OVER YOUR HEAD. TERRAIN, WEATHER, VEGETATION, TRANSMISSION FROM OTHER RADIO DEVICES, AND OTHER FACTORS WILL AFFECT THE MAXIMUM RANGE. ACCESSORIES To purchase additional accessories for your SportDOG Brand YardTrainer, contact the Customer Care Center at 1-800-732-0144. Component Part Number Remote Transmitter Collar Receiver Charge Cable Remote Transmitter Battery Kit Collar Receiver Battery Kit 3 SPORTDOG.COM KEY DEFINITIONS SIDE BUTTON CONTACT POINTS TRANSMITTER ANTENNA TRANSMITTER INDICATOR LIGHT INTENSITY DIAL UPPER BUTTON LOWER BUTTON CHARGING JACK ON/OFF BUTTON RECEIVER INDICATOR LIGHT REMOTE TRANSMITTER: Transmits the radio signal to the Collar Receiver. It is waterproof and can be submerged in water to a depth of 25 feet. INTENSITY DIAL: Provides multiple levels of static stimulation so you can match the correction to your dogs temperament. TRANSMITTER INDICATOR LIGHT: Indicates that a button is pressed and also serves as a low battery indicator. UPPER BUTTON: This button is factory-set to deliver continuous static stimulation. LOWER BUTTON: This button is factory-set to deliver vibration stimulation. SIDE BUTTON: This button is factory-set to deliver a tone. CHARGING JACK: For connecting the charger. Although the Remote Transmitter is waterproof without it, keep the cover in place when not charging to keep debris out of the opening. COLLAR RECEIVER: Receives the radio signal from the Remote Transmitter and delivers the static, vibration, or tone stimulation for correcting or cueing your dog. It is waterproof and can be submerged in water to a depth of 25 feet. RECEIVER INDICATOR LIGHT: Indicates when the Collar Receiver has been turned on or off, serves as a low-
battery indicator, and also indicates when the continuous stimulation button is pressed. CONTACT POINTS: The contacts through which the Collar Receiver delivers static stimulation. ON/OFF BUTTON: Momentarily pressing and releasing this button turns the Collar Receiver on and off. THE COLLAR RECEIVER IS CAPABLE OF DELIVERING THREE TYPES OF STIMULATION:
CONTINUOUS: You control both when and how long static stimulation is delivered, up to a maximum of 10 seconds. After 10 seconds the stimulation will time out and the Transmitter button needs to be released and then pressed again before additional stimulation can be delivered. Quickly pressing and releasing the Upper Button will give a brief correction or nick. TONE: The Collar Receiver will make a rapid beeping noise when a Tone button is pressed. VIBRATION: The Collar Receiver will vibrate when a Vibration button is pressed, up to a maximum of 10 seconds. 4 1.800.732.0144 STEP::01 PREPARE THE REMOTE TRANSMITTER CHARGE THE REMOTE TRANSMITTER 1. 2. Connect the corresponding charge connector to Lift the rubber cover protecting the Charging Jack. the Charging Jack. 3. Plug the USB Adaptor into a power source. 4. Charge the Remote Transmitter for 2 hours for the first charge and every charge thereafter. Using Li-Ion technology, the Remote Transmitter only requires a 2 hour charge. It is not harmful to let the unit charge for more than 2 hours. 5. When charging is complete, replace the rubber cover. NOTE: Approximate battery life between charges is 50 to 70 hours, depending on frequency of use. CHARGE CONNECTOR PLACED IN THE REMOTE TRANSMITTER CHARGING JACK TRANSMITTER INDICATOR LIGHT OPERATIONAL MODE LIGHT COLOR BATTERY STATUS LIGHT FUNCTION Continuous, tone, or vibration stimulation button pressed Continuous, tone, or vibration stimulation button pressed Unit is charging Unit is fully charged
(charger still connected) Green Good Red Green Green Low Low Good Light is solid in color while button is pressed Light is solid in color while button is pressed Light is solid in color while on the charger Light flashes once per second once the battery is completely charged 5 SPORTDOG.COM STEP::02 PREPARE THE COLLAR RECEIVER Before using the YardTrainer 100/100S for the first time, be sure to charge the unit by following the steps described below. The YardTrainer contains a rechargeable battery pack. When the unit indicates the battery in low (red light indicator) it is time to recharge the unit. To conserve battery life, turn the YardTrainer 100/100S off when not in use. CHARGE THE COLLAR RECEIVER 1. Align the Charging Cradle with the Charging CHARGING CRADLE PLACED ON THE CHARGING CONTACTS Contacts as shown in the image. Push down on the Charging Cradle until it snaps into place. 2. Plug the USB Adaptor into a power source. The Indicator Light will be solid green while charging. During charging, keep the YardTrainer 100/100S in an open, well-ventilated area. 3. Charge the Collar Receiver for 2 hours for the first charge and every charge thereafter. The Indicator Light will flash green once charging is complete. 4. Remove the Charging Cradle from the YardTrainer 100/100S and unplug the USB Adaptor from the power source. ON/OFF BUTTON Using Li-Ion technology, the Collar Receiver only requires a 2 hour charge. It is not harmful to let the unit charge for more than 2 hours. TO TURN THE COLLAR RECEIVER ON Press and release the On/Off Button, the Collar Receiver Indicator Light will come on green or red, depending on battery status. TO TURN THE COLLAR RECEIVER OFF Press and release the On/Off Button, the Receiver Indicator Light comes on solid red and the Collar Receiver beeps continuously for 2 seconds. To extend the life between charging cycles, turn the Collar Receiver off when it is not in use. NOTE: Approximate battery life between charges is 20-25 hours, depending on frequency of use. 6 1.800.732.0144 RECEIVER INDICATOR LIGHT OPERATIONAL MODE Unit is turned on via On/Off Button Unit is turned on via On/Off Button LIGHT COLOR Green Red Low BATTERY STATUS Good Unit is turned off via On/Off Button Red N/A Green Good Red Red Low N/A Off N/A Unit is on Unit is on Unit is delivering continuous static stimulation Unit is delivering tonestimulation Unit is delivering vibration stimulation Off N/A N/A LIGHT FUNCTION Light is solid in color during beep sequence Light is solid in color during beep sequence Light is solid in color during beep sequence Light flashes every 2seconds Light flashes every 2seconds Light is solid in color for as long as button is pressed (up to 10seconds) N/A SPEAKER FUNCTION Unit will beep once Unit will beep once Beeps continuously for 2seconds N/A N/A N/A Unit will beep for as long as button is pressed N/A Unit is charging Green Low Unit is fully charged (charger stillconnected) Green Good Light is solid in color while charging Light flashes once per second once the battery is completely charged N/A N/A VIBRATION N/A N/A N/A N/A N/A N/A Unit will vibrate for as long as button is pressed (up to 10 seconds) N/A N/A RECHARGEABLE BATTERIES Batteries should never be removed from the battery compartment for charging. Risk of explosion if batteries are charged in areas with high temperature (100 F+ / 38 C+). The rechargeable Lithium Ion (Li-Ion) batteries are not memory sensitive, do not require depletion before charging, and cannot be over charged. 7 SPORTDOG.COM The batteries come partially charged from the factory, but will require a full charge before the first use. When storing the unit for long periods, remember to regularly give batteries a full charge. This should be done once every 3 to 4 months. You should expect hundreds of recharge cycles from your batteries. However, all rechargeable batteries lose capacity over time relative to the number of recharge cycles they experience. This is normal. If your operating time drops to half of the original life, contact the Customer Care Center to purchase a new battery. The batteries should last for a period of 3-5 years. When a battery needs replacement, you can order a new pack by calling our Customer Care Center at 1-800-732-0144. Please do not open the Collar Receiver or Remote Transmitter until you have received the replacement. STEP::03 FIT THE COLLAR RECEIVER IMPORTANT: The proper fit and placement of the Collar Receiver is important for effective training. TheContact Points must have direct contact with your dogs skin. To ensure a proper fit, follow these steps:
1. With your dog standing (3A), center the Collar Receiver so the Contact Points are underneath your dogs neck, touching the skin (3B). If your dog has a long or thick coat, you have two options to ensure consistent contact: either trim the hair around the Contact Points or switch to the longer Contact Points included with your system. 3A 3B 2. The Collar Receiver should fit snugly, yet loose enough to allow one finger to fit between the strap and your dogs neck (3C). 3. Allow your dog to wear the collar for several minutes, and then recheck the fit. Check the fit again as your dog becomes more comfortable wearing the Collar Receiver. 3C STEP::04 FIND THE BEST INTENSITY LEVEL FOR YOUR DOG Your YardTrainer System has multiple intensity levels. This allows you to choose the static stimulation that is best for your dog. For training efficiency, it is important to find the right intensity level for your dog. This is called the Recognition Level, at which your dog looks around in curiosity, or flicks his ears. NOTE: Always start at the lowest level and work your way up. 8 1.800.732.0144 FINDING YOUR DOGS RECOGNITION LEVEL:
NOTE: Every dog is different and you cannot predict where your dogs Recognition Level will be. Watch closely for any slight change in behavior that demonstrates your dog is feeling the static stimulation. 1. With the Collar Receiver turned on and properly fitted to your dog, set the Remote Transmitters Intensity Dial at Level 1 and press the Continuous Static Stimulation Button for 1 to 2 seconds. If your dog shows no reaction to Level 1, go to Level 2 and repeat the process. 2. 3. YOUR DOG SHOULD NOT VOCALIZE OR PANIC WHEN RECEIVING STATIC STIMULATION. IF THIS HAPPENS, THE STATIC STIMULATION LEVEL IS TOO HIGH AND YOU NEED TO GO BACK TO THE PREVIOUS LEVEL AND REPEAT THE PROCESS. 4. Once you find your dogs Recognition Level, this is the level you should use when you begin a 5. training exercise. If you have progressed to the highest static stimulation level while searching for your dogs Recognition Level and your dog continues to show no response, check to see if the Collar Receiver is snug against your dogs neck. Then go back to Intensity Level 1 and repeat the process. If your dog still does not indicate he is feeling the static stimulation, you have two options: you may either have to trim the hair beneath the Contact Points, or switch to the longer Contact Points included in your system. For more information on this topic see page 15. If after completing all of these steps your dog still does not indicate he is feeling the static stimulation, please contact Customer Care Center at 1-800-732-0144. STEP::05 MATCH THE COLLAR RECEIVER AND REMOTE TRANSMITTER To match the Collar Receiver to work with a new Remote Transmitter or to match a new Collar Receiver to work with your existing Remote Transmitter:
1. Turn off the Collar Receiver. 2. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off after 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin flashing as normal. If this occurs, start over from 1. 3. After the Receiver Indicator Light has turned off, release the On/Off Button. 4. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been matched and will begin flashing as normal. If the Receiver Indicator Light does not flash 5 times, start over from 1. 9 SPORTDOG.COM BASIC TRAINING BEFORE TRAINING YOUR DOG WITH THIS PRODUCT You will have the most success using this Remote Trainer if you always remember to teach a command before trying to reinforce the command with a Remote Trainer. We recommend that you read the following Basic Training instructions before training with this Remote Trainer. Your training will be easier and proceed faster if you follow the guidelines in this teaching assistant BASIC TRAINING WITH PRO TRAINER CHARLIE JURNEY TRAINING YOUR DOG TO PERFORM OBEDIENCE COMMANDS ON A LEASH It is mandatory that you control your dogs actions during every training session. Initially, controlling your dog during obedience training sessions is accomplished in two ways: 1) the leash and 2) the tone of your voice. While on the leash, your dog does not have an opportunity to escape through the instinctive mechanisms all canines possess. Bolting, biting, and quitting are no longer options. Your tone of voice will later take the place of the leash. Later the e-collar will replace both and you will be able to put the leash away until you train your next dog. Your dog should always work for you because you are the most important relationship in its life, and pleasing you should be at the top of its priority list. The positive reward any dog appreciates most from a trainer is a thank you in the form of a loving shoulder stroke, affectionate eye contact, and a sincere good dog. If your dog does not light up on any of those three, you need to reevaluate your relationship. Each command should be followed with a positive reward of some fashion when your dog follows your lead. THE FIRST COMMAND: NO The first command your dog will learn is No. Usually your dog will understand this command by the end of its first day with you. Your dog hears this command each time it is doing something wrong and it comprehends the command by the way you say it. Your dog may have been running around the house with your wifes pantyhose in its mouth or chewing on your prized decoy when it hears that dreadful word. Intonation expresses your feelings to your dog in a language that is universal. The tone of your voice tells your dog that it is in trouble and through repetitive use, the word No comes to mean the same thing. Voila! Our first conditioned response! (Thank you, Dr. Pavlov). No means stop what you are doing immediately. Put yourself in your dogs place when it hears this command and understands it. The dog is thinking it must quickly stop what it is doing. Your dog would gladly obey you, if it only knew what you desired. For this reason, when your dog does stop doing whatever it was that bothered you, you must give another command expressing what will please you. No is always followed with something that will make you happy. When you are happy, your dog will see it through your eyes, feel it by your touch, and hear it in your tone. And, that is your dogs positive reward. Even when it makes a mistake and is corrected by the word No, it receives a reward by following your next command. This is a simple and foolproof method. 10 1.800.732.0144 THE MOST IMPORTANT COMMAND: HERE Here is the most important command your dog will ever learn. It is an escape from almost any trouble. Here tells your dog to come to you immediately and without deviation. This command is very easy for your dog to learn if you will speak its language. Most dogs will make a beeline to any person who kneels down and opens up their arms. In this position you are using postural language to welcome your dog. While you are kneeling and your dog is running to you, add the verbal command Here. Shower your dog with positive verbal rewards while stroking its shoulder. Lets take a second again and discuss how much positive reward to give a dog when it follows your commands. Do you remember how your dog communicates to you that it understands and accepts your actions? When your dog swallows, it says, I understand. So, back off the positive rewards when your dog says it understands and accepts your thank you by swallowing. Continually stroking your dogs shoulder and praising it will eventually lessen the sincerity of your reward and that could be a huge mistake. Training your dog to come to you with the Here command is done along with the postural position of kneeling and opening up your arms. The leash (or lead) should be used in training your dog on the command Here as soon as it is comfortable with the leash. Give the command Here and apply a slight tug on the leash. Be sure to release the leash pressure the instant the dog starts coming toward you. Many people try to maintain leash pressure until the dog is at their side. While this works, it can be too much pressure and your dog does not get the reward of turning the pressure off while it is coming to you. If your dog hesitates or fails to come directly to you, give another tug with the lead and repeat Here. When your dog arrives at your side, stroke its shoulder until it gives you a swallow response. Your dog has learned what you want and now it is time to condition the response with repetition. A POSITIONAL COMMAND: HEEL Heel is a positional command that instructs your dog to assume a position beside your leg whether you are walking, standing, running, or riding a horse. People seek professional help in teaching their dog to heel properly more than for any other command. These folks always explain that their puppy is a great dog but it will not walk on its leash. This means the dog feels like it is alpha and should lead its owner where it pleases. Every dog will learn the proper heel position on its first day of training with proper leash usage. Place the leash in its proper position behind your dogs ears and begin walking forward. If your dog attempts to lead you by moving ahead, simply change direction. The leash will tighten around its neck and it will follow your new direction. It is imperative that no leash pressure be present when your dogs head is beside your knee. It will learn this position is safe and causes no discomfort through repetition. Add the verbal command Heel after the dog assumes the correct position and repeat Heel each time its head is beside your knee. We have discussed how to correct your dog if it attempts to lead you, but what should you do if it tries to lag behind or flop around like a fish instead of following your lead? Keep moving forward and allow the leash to do its job. The important point is for you not to stop moving. If you stop walking to check on your dog or coax it forward, the leash will relax and its pressure will stop. Your dog must learn that the only way the pressure around its neck will disappear is by assuming the correct Heel position. With repetition, this position will become a comfort zone. 11 SPORTDOG.COM ANOTHER POSITIONAL COMMAND: SIT The next command to teach is Sit. With this command, you tell your dog to sit and remain seated until it receives another command. The leash applies pressure to the underside of the dogs neck when you are training it to sit. You are now working on a different pressure point. Pull straight up on the lead with your right hand and push down on your dogs butt with your left hand until its bottom hits the ground. Add a verbal Sit and release the pressure on the leash. Pressure from the leash can be omitted when your dog is consistently sitting on verbal commands. Later you will get into corrections and the steps you should follow to make things clear for your dog. Repeat the Sit drill until your dog is happily driving nails with its rear. Have you ever seen a dog sit sideways? It flops down and comes to rest on one hip. This is a common occurrence for lazy dogs and needs to be corrected. Pull up on the leash until your dog sits in a proper fashion. It may become necessary to step forward if your dog will not align itself properly at first. Fight for the proper sit position now and you wont have to address this in the future when you are asking it to sit in the face of overwhelming distractions. Now your dog has learned to come to you, walk comfortably beside you, and sit on command. It must concentrate and use its brain as it learns these skills. Pay close attention to your dogs focus, making sure that the training sessions are not too long. Even though your dogs brain is a sponge at this point, it can become oversaturated and unable to receive anymore constructive information. A FOLLOW-UP TO SIT: STAY When you give your dog the Sit command, youve told it to sit and remain seated until it receives another command. Many obedience programs no longer use the Stay command, believing it is redundant and not necessary. However, it would be good for you to know how to condition for this command if your dog struggles with remaining seated. To reinforce sitting, apply a light amount of upward leash pressure to its collar and command Stay as you start to move away and toward the end of the leash. Your dog will likely get up and try to move with you. If this occurs, stop it with No, reseat the dog with Sit, and repeat Stay with another upward tug on the leash. It should not take too many corrections before your dog figures this puzzle out. Should it continually refuse to stay, add increasing amounts of leash pressure and stronger No commands until it obeys. You may need to be more patient here than any other place. You have already conditioned your dog to move with you at heel as you move away and many dogs think this is what you want now instead of remaining seated. Correction for mistakes, rewards for positive responses, and repetition will quickly condition your dog to this command. A DIRECTIONAL COMMAND: KENNEL You will often require your dog to enter different areas and objects: airline crates, vehicles, buildings, boats, duck blinds, and fenced areas are just a few examples. You will use the command Kennel to tell your dog to enter what is in front of it. Always use the command Sit before you ask a dog to enter. If you give your dog a chance to sit and look into the area it is being asked to enter, it will be far more likely to perform this skill without a fight. By looking into this area, your dog can see that the boogie man is not waiting inside. 12 1.800.732.0144 What should you do if your dog decides it does not want to enter? You know it will give to the pressure of a leash, so lead it into the proper area and command Kennel. Once in the correct place, stroke pup on the shoulder until you see acceptance via the swallow response. Repeat this routine until you start to develop a conditioned response to your command. Some dogs fight this entry with a great deal of vigor. If your dog chooses this option, be sure to maintain leash pressure until you get the desired response. Once it understands that there is no danger in these areas, it will be glad to enter upon command. Think about your individual training situation and see if you can create opportunities to work on the Kennel command. This can be accomplished by having an airline crate with you while doing your dogs obedience routine or working in an area close to the entrance of your home where the doorway becomes the area in which your dog is commanded to enter. Or, you could use your vehicle, and this will be very handy when you take your dog to other training areas. A FINAL OBEDIENCE COMMAND: DOWN The next command in your obedience program will be Down, which tells your dog to lie down and remain in this position until it receives another command. This command is most often used around the home. For this reason, the easiest time to work on Down is at night while watching television. Command your dog to Sit and stroke its shoulder when it obeys. Face the dog, grab its front paws, and pull them toward you. When your dogs chest hits the floor, command Down and stroke a shoulder again. Most dogs will immediately rise, assuming a sit position. If this occurs, correct your dog with No and repeat the Down process again. It generally takes around three evenings before your dog will become comfortable with this routine. But, do not be worried if it takes your dog three weeks. UNDERSTANDING CORRECTION We have spoken very little about correcting your dog for making a mistake up until this time. No dog is perfect and many mistakes are going to occur while training. In reality you want your dog to make mistakes so you can clearly show the difference between right and wrong. It is important that you have a correction method that your dog understands and comfortably accepts. Here is the correction system you should use from Day One. The same correction system will be used for the rest of your dogs life whether you are using a leash or e-collar to correct improper responses. 1. Give your dog a command. If it obeys, use a positive reward. If it fails to obey, proceed to Step 2. 2. Stop your dogs incorrect action with the command No. Repeat the command after you get the incorrect actions stopped. If your dog obeys, use a positive reward. If it fails to obey, proceed to Step 3. 3. Stop your dogs incorrect action with the command No and use the physical pressure of your leash until the correct response occurs. Immediately release the pressure when your dog obeys, repeat the command, and praise with a positive reward. If you are consistent in this correction process, the verbal correction of No will become much more powerful. Your dog will learn through daily usage that if it does not follow your lead after the command No, there will be some form of physical pressure (leash or electronic). Your dog does not like being corrected any more than you do. Correction will be a part of its life and it will accept this correction as long as you give it in a comfortable and systematic fashion. This means you must be consistent and you cannot hurt your dog by hitting, kicking, or overstimulating when you become frustrated. 13 SPORTDOG.COM APPLICATION OF THE ELECTRONIC COLLAR E-collar use has come a long way. The equipment is better and the many available programs for training with e-collars are better. Some people dont believe e-collars are reliable enough and therefore they shouldnt be used, but successful results are dependent on the skills of the operator, not the product. It is very rare for a dog to not accept and happily work while on a leash, but you can hurt your dogs attitude if it is used improperly. It is the same with e-collars. You can do an unbelievable amount of damage to your dogs attitude by over correcting with an e-collar if you do not know what you are doing or if you dont control your actions. This program will show you how to use an e-collar, but you must never lose control of your emotions. So, make a promise to yourself and your dog that you will always remain focused and in control when training. In the beginning, e-collars were simple metal boxes with an on/off switch and no way to adjust the static stimulation levels. And they were often unreliable. SportDOG Brand remote training systems are an example of how advanced e-training products have become. SportDOG Brand offers several excellent models that work at great distances over land or in water. THE RIGHT WAY TO BEGIN Your dog needs to start wearing an e-collar as soon as it can comfortably support the collars weight. The collar should be worn from that point forward during all training sessions. Initially, you should attach the collar and do something fun such as retrieving exercises with a bumper or ball. Continue this until your pups tail is wagging uncontrollably. Soon, your dog will be doing airplane spins each time it sees the collar and think, Oh boy, we are getting ready to have some fun! That is a pretty nice first impression. This is an important first step in collar conditioning: your dogs acceptance of the e-collar in a fun fashion. You shouldnt be pressing any of the Remote Transmitters buttons until your dog is 100 percent reliable on obedience drills. When you have to deliver a correction you do not want your dog trying to guess what you expect. Your dog should be performing these skills masterfully in the face of distractions. If you did your homework, your dog will have an excellent understanding of what you are asking while being able to process pressure at the same time. Before, pressure was in the form of a leash. Now, it will be an electronic, brief correction from the collar. Your dog already knows what to do in the face of pressure; you are simply changing the type of pressure. Previously the pressure of the leash was on your dogs neck and that is where the e-collar also applies pressure, but in a different form. The e-collar will now become an infinitely long leash to your dog. A brief correction with the collar will take the place of a tug on the lead. This sounds pretty simple doesnt it? Keep it that simple and you and your dog will be happy. Always remember: You are not going to teach your dog anything with an e-collar. You are only adding electronic pressure to a skill your dog already knows and can routinely perform. Also, do not use the e-collar to correct responses in an area where your dog may have not performed these skills until the training process is finished. 14 1.800.732.0144 FINDING THE CORRECT STATIC STIMULATION LEVEL The hardest thing about using an e-collar is finding the proper level of static stimulation and sticking with it. Some folks are of the opinion that you should use continuous high-level static stimulation until the dog complies. Others think you should use low-level continuous static stimulation. Both programs can work and create a dog that performs great, but either of these methods could lead to trouble for a novice trainer. Your long-term goal is to have your dog remain under total control while receiving correction from the e-collar and understand why the correction occurred. Remain under total control is the key phrase in that sentence. If your dog is jumping around or cannot focus on you because it is vocalizing, it is not under control. If your dog reacts in either of these ways, back off. Either you are progressing too fast or the static stimulation intensity is too high. You should shop for the correct level of static stimulation by starting with the lowest intensity and continuing up until you see the acceptance mechanisms appear. This is first introduced during obedience drills. With your dog on-leash, call it to you. After a few successful Here routines, apply leash pressure and stimulate with the e-collar at the same time. Look for the swallow response, head drop, or neck twitch. Sometimes you can see a change in the breathing pattern. Progress up in intensity until you see your dog say, I accept with one of these responses. When you see your dog drop its head or swallow, you are there and this will be your most-often used correction level. COLLAR CONDITIONING WITHIN EACH OBEDIENCE COMMAND Never correct your dog with the e-collar without first conditioning it to accept and understand the collar. This will take a short period of time, but without the conditioning process, your dog will be dazed and confused about the discomfort around its neck. It is easy to confuse your dog and undo a couple of months of good training in just a few minutes by over-stimulating on a correction or correcting when it is not justified. No corrections should occur until the conditioning process has been successfully completed. The collar-conditioning process can be thought of as practice in accepting electronic static stimulation. Your football coach didnt send you on the field without practicing the plays and likewise, we do not want to send your dog into the world without an understanding of how to comfortably accept electronic correction. 15 SPORTDOG.COM USING AN E-COLLAR TO REINFORCE OBEDIENCE COMMANDS HERE Bolting can become a disastrous side-effect of e-collar conditioning if your dog is allowed to move away from your control. Therefore, keep using the leash until the conditioning process is finished. Toss a few bumpers and work on obedience drills in the training area. Check for that wagging tail which signals a good attitude. Then command Here, deliver a brief correction on the correct level paying close attention to the dogs reaction and then immediately command Here again. Reward your dog with a stroke on the shoulder and verbal praise. Repeat Here-brief correction-Here three to five times on the first day at various places in the work area while making sure that no two brief corrections occur at the same spot. Your dog will receive at least three brief corrections, but no more than five, during the first couple of sessions. If things are going well, you can go to five. But, if your dog is nervous, stop at three. Continue the obedience routine with no static stimulation for a little longer. Make sure rewards follow proper responses. Finish by throwing a bumper or ball to each spot where your dog received static stimulation in an effort to show that the location had nothing to do with why the correction occurred. Pay close attention to your dogs attitude during this routine. If momentum fades, use fewer brief corrections and more play time. Increase the reward by adding a few extra shoulder strokes along with a happy tone of voice. Dont be afraid to skip a day if your dog shows repeated signs of too much pressure. This is not likely to occur if you are careful, but understand how to overcome it just in case. SIT Next, it is time to condition your dog to sit and accept a correction while maintaining control in the seated position. Have your dog do a quick obedience drill and command Sit. While the dog is seated, give a brief correction with the collar and immediately command Sit again. If it moves around or gets up, return the dog to the seated position by using the leash. Reward on the shoulder and verbally. Repeat the Sit-brief correction-Sit three to five times per session. As before, move around so you do not stimulate your dog at any spot more than once. Use a positive reward after each successful brief correction. STAY When your dog is comfortably accepting e-collar pressure while remaining seated, you can start to use the e-collar for correction on the Stay command. After successfully seating your dog, command Stay, deliver a brief correction and command Stay again. Watch for the acceptance response and do not move ahead until you get it. Call your dog to you and repeat the process several times without e-collar stimulation. Repeat the Stay-brief correction-Stay at other locations and repeat this process until your dog is the picture of perfection, remaining seated even when distractions tempt it to get up and move. 16 1.800.732.0144 HEEL Your dog learned to heel beside you earlier in the program, and transferring this command to e-collar correction is simple. Walk your dog on-leash and change directions. As the leash tightens, command Heel, give a brief correction with the collar and command Heel again. It is important to apply the brief correction at the same time the leash is tight instead of when the dog is coming to you. Reward with verbal praise and a stroke on the shoulder until you see the acceptance swallow. Repeat this routine as you walk together in various locations until your dog is comfortable. Your dog is now conditioned to accept the e-collar while coming, heeling, or sitting on command. It is time to mix the commands into a full Here-Heel-Sit drill. Use your brief correction at varying times as your dog allows and as before, avoid successive brief corrections or multiple brief corrections in the same area. You can increase the number of brief corrections as long as you pay close attention to your dogs attitude. Toss a few bumpers to chase when necessary to relieve pressure and pour on the positive rewards as needed. DOWN Your dog understands the Down command and can perform it without any trouble by now if you did your homework. Now you can easily add the e-collar to this routine in the same fashion as before. Place your dog in the Down position with a verbal command. Command Down again, give a brief correction with the e-collar and repeat Down. Watch how your dog reacts, looking for the acceptance signals. Praise with a stroke on the shoulder and verbally. As before, you need to condition this with repetition. KEEP THAT COLLAR ON!
At some time, you will get to a point where you feel like your dog no longer needs to wear the e-collar because it never makes a mistake. Congratulations on a job well done! However, your dog should always wear the e-collar when in environments that contain distractions. Would you drive your car across the country without automobile liability insurance? You should now think of the e-collar as your insurance policy in case you and your dog get into a wreck. It gives your dog a way out of trouble in an orderly fashion that it understands even when its instincts are telling it to do something else. What does it hurt for your dog to wear the e-collar when you go to the park, Grandma comes for a visit, it is time to go to the vet, or a million other unknown distractions? You taught that the e-collar means the two of you are getting ready to do something fun, so keep the e-collar on. ENJOY THE TRIP You have now learned how to start down the road to a life of enjoyment with your dog. Some of these steps may need to be covered again if your dog has repeated failures. That is no problem as long as you take it easy and enjoy the ride together. Arriving is one of our goals but the trip that takes you there will be filled with memorable times that will cement you and your dogs relationship forever. GOOD TRAINING!
Charlie Jurney of Terrell, North Carolina, is a professional retriever trainer and owner of Beaverdam Kennels, producer of Grand Master Hunting Retrievers and Master Hunting Retrievers. Most recently, Charlie authored the Finished Dog retriever training book. 17 SPORTDOG.COM While the static stimulation is unpleasant, it is harmless to your dog. Electronic training devices require interaction and training from the owner to achieve desired results. Your dog should be able to learn basic obedience commands such as Sit or Stay. The Collar Receiver may be too large for dogs under 8 pounds. Your dog may need to wear the Collar Receiver from time to time for reinforcement. Yes. If the rechargeable battery pack ever needs to be replaced, make sure the o-ring and o-ring groove are free from dirt and debris. We do not recommend any of our products to be used on aggressive dogs. We recommend you contact your local veterinarian or professional trainer to determine if your dog might be aggressive. The range you get with your YardTrainer 100/100S will vary according to terrain, weather, vegetation as well as transmission from other radio devices. To get the maximum amount of range, please refer to How the System Works section of this guide. The maximum amount of time you can press the Continuous Static Stimulation Button and deliver static stimulation to your dog continuously is 10 seconds. After 10 seconds, the Remote Transmitter will time-out, and the Continuous Static Stimulation Button must be released and pressed again. This condition is due to the Contact Points irritating the skin. Discontinue use of the Collar Receiver for a few days. If the condition persists beyond 48 hours, see your veterinarian. Once the skin returns to normal, resume use, and monitor the skin condition closely. No. The YardTrainer 100/100S is a 1-dog system. FREQUENTLY ASKED QUESTIONS Is the static stimulation safe for my dog?
How old does a dog have to be before using the YardTrainer 100/100S?
Once my dog is trained and has been obeying my commands, will my dog have to continue to wear the Collar Receiver?
Is the Collar Receiver waterproof?
Can I use the YardTrainer 100/100S on aggressive dogs?
Will I get exactly 100 yards of range with the YardTrainer 100/100S?
How long can I continuously deliver static stimulation to my dog?
What do I do if my dogs neck becomes red and irritated?
Can I use the YardTrainer 100/100S with more than one dog?
18 1.800.732.0144 TROUBLESHOOTING The answers to these questions should help you solve any problem you have with this system. If they do not, please contact the Customer Care Center at 1-800-732-0144 or visit our website at www.sportdog.com. My dog is not responding when I press a button. Check to see if the Collar Receiver has been turned on and the Indicator Light is flashing. If your range has reduced from the first time you have used it, your Remote Transmitter or Collar Receiver battery may need to be replaced. Many factors can impact the range you have with the YardTrainer 100/100S. For a list of these factors, please refer to How the System Works. You can verify the Collar Receiver is delivering static stimulation to your dog by placing the test light, enclosed in your kit, on the Collar Receiver. Please refer to the Test Light Instructions for details. Increase the Intensity Dial. Refer to Find the Best Intensity Level For Your Dog for more information. Make sure the Collar Receivers Contact Points are placed snugly against your dogs skin. Refer to Fit the Collar Receiver for more information. You may need to switch to the longer Contact Points included with your system or trim the hair beneath the Contact Points, never shave your dogs neck. The Collar Receiver will not turn on. The Collar Receiver is not responding to the Remote Transmitter. Try charging the Collar Receiver (see STEP 2). Verify the Collar Receiver has been turned on and the Indicator Light is flashing. Refer to Turning the Collar Receiver On and Off. Refer to Match the Collar Receiver and Remote Transmitter. Try charging the Remote Transmitter (see STEP 1). TEST LIGHT INSTRUCTIONS 1. Turn on the Collar Receiver. 2. Hold the Test Light Contacts to the Contact Points. 3. Press the Upper Button on the Remote Transmitter. 4. The Test Light will flash. NOTE: At higher static stimulation levels, the Test Light will flash brighter. 5. Turn off the Collar Receiver. Save the Test Light for future testing. NOTE: If the Test Light does not flash, recharge the battery and retest. If the Test Light still does not flash, contact the Customer Care Center at 1-800-732-0144. 19 SPORTDOG.COM Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 USA 1.800.732.0144 S P O R T D O G . C O M 2018 RADIO SYSTEMS CORPORATION 400-2248
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-09-13 | 433.92 ~ 433.92 | DSC - Part 15 Security/Remote Control Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2018-09-13
|
||||
1 | Applicant's complete, legal business name |
Radio Systems Corp
|
||||
1 | FCC Registration Number (FRN) |
0014529481
|
||||
1 | Physical Address |
10427 PetSafe Way
|
||||
1 |
Knoxville, Tennessee 37932
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
KE3
|
||||
1 | Equipment Product Code |
3003359
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
C**** A******
|
||||
1 | Title |
Product Safety and Regulatory Specialist
|
||||
1 | Telephone Number |
865-8********
|
||||
1 | Fax Number |
865-6********
|
||||
1 |
c******@petsafe.net
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSC - Part 15 Security/Remote Control Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Remote Control Transmitter/Pet Trainer | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
US Tech
|
||||
1 | Name |
G****** Y********
|
||||
1 | Telephone Number |
770-7********
|
||||
1 | Fax Number |
770-7********
|
||||
1 |
g******@ustech-lab.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | 433.92000000 | 433.92000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC