AA Sa ee NP? 43-3506.fm Page | Thursday. September 28, 2000 11:56 AM Lhe ee 900 MHz Big Button Cordless Telephone with Lighted Keypad and 3-Band Equalizer OWNER'S MANUAL - Please read before using this equipment. FEATURES Your RadioShack 900Mhz Big Button Cord-
less Telephone offers the latest advances in cordtess phone technology including a space saving design. Its headset jack lets you con-
nect an optional headset (available at your local RadioShack store) for hands-free con-
venience while you use the phone. Your phone includes these additional fea-
tures:
3-Emergency and 10-Memory Speed Dial stores up to 3 emergency numbers and 10 frequently called numbers for easy dialing. Incoming Cali and Battery Indicator the antennas built-in indicator lights when the phone is in use, when you have an incoming cail (even when the ringer is off), and when the battery is low. 3-Band Equalizer/Tone Control lets you control the frequency and volume of the sound you hear through the handset. Lighted Handset Keypad lights when you press any key or receive a call, making the phone easy to use, even in total dark-
ness. Ample Talk and Standby Time when fully charged (about 12 hours), the supplied battery provides about 7 hours
(when the equalizer is off) or 5 hours (when the equalizer is on) of talk time or 7 days of standby time. Security Access-Protection Code pre-
vents other cordless phone users from using your phone line. 10-Channel Auto Scan automatically se-
lects a clear channel when you make or an-
swer a call. Page lets you send a paging signal from the base to the handset to help locate a mis-
placed handset or page someone at the handset. WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK. CAUTION: To REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. This symbol is intended to alert you to the presence of uninsu-
lated dangerous voltage within the product's enclosure that might be of sufficient magnitude to con-
stitute a risk of electric shock. Do not open the product's case. AN This symbol is intended to inform you that important operating and maintenance instructions are included in the literature accom-
panying this product. AN Your phone is ETL listed to UL standards and meets all applicable FCC standards.
&) RadioShack. www.radioshack.cony 2000 RadioShack Corporation. All Rights Reserved. RadioShack and RadioShack.com ara trademarks used by RadioShack Corporation. aN ee q aS d e a
/ 43-3506.fm Page 2 Thursday, September 28, 2000 11:56 AM READ THIS BEFORE INSTALLATION Each device that you connect to the phone line draws power from the phone line. We re-
fer to this power draw as the devices ringer equivalence number, or REN. The REN is on the bottom of the base. If you are using more than one phone or other device on the fine, add up all the RENs. ff the total is more than five (three in rural areas), your phone might not ring. If ringer operation is impaired, remove a device from the line. FCC STATEMENT This telephone complies with Part 68 of the FCC Rules. You must, upon request, provide the FCC registration number and the REN to your phone company. These numbers are on the bottom of the base. Note: You must not connect your phone to any of the following:
+ coin-operated systems
* party-line systems
* most electronic key phone systems THE FCC WANTS YOU TO KNOW In the unlikely event that your phone causes problems on the phone line, the phone com-
pany can temporarily discontinue your ser-
vice. If this happens, the phone company attempts to notify you in advance. If advance notice is not practical, the phone company no-
tifies you as soon as possible and advises you of your right to file a complaint with the FCC. Also, the phone company can make changes to its lines, equipment, operations, or proce-
dures that could affect the operation of this telephone. The telephone company notifies ycu of these changes in advances, so you can
take the necessary steps to prevent interrup-
tion of your telephone service. This equipment complies with the limits for a Class B digital device as specified in Part 15 of the FCC Rules. These limits provide rea-
sonable protection against radio and TV inter-
ference in a residential area. However, your equipment might cause TV or radio interfer-
ence even when it is operating properly. To eliminate interference, you: can try one or more of the following corrective measures:
* Reorient or the antenna. relocate receiving Increase the distance between the equip-
ment and the radio or TV.
+ Use outlets on different electrical circuits for the equipment and the radio or Tv. Consult your local RadioShack store if the problem still exists. Warning: Changes or modifications to this phone not expressly approved by the party re-
sponsible for compliance could void the user's authority to operate the phone. LIGHTNING Your telephone has built-in lightning protec-
tion to reduce the risk of damage from surges in telephone line and power line current. This lightning protection meets or exceeds FCC re-
quirement. However, lightning striking the telephone or power lines can damage your telephone. Lightning damage is not common. Neverthe-
fess, if you live in an area that has severe electrical storms, we suggest that you unplug your phone when storms approach to reduce the possibitity of damage. o 4 43-3506.fm Page 3 Thursday, Septentber 28, 2000 11:56 AM MOUNTING THE PHONE Choosing a Location You can place the phone on a desk or table, or mount it on a standard wall plate or directly on a wall. Select a location that is:
* near an easily accessible AC outlet
* near a telephone line jack
* out of the way of normal activities
* away from electrical machinery, electrical appliances, metal walls, filing cabinets, wireless intercoms, security alarms, and room monitors The bases location affects the phones range. If you have a choice of several locations, try each to see which provides the best perfor-
mance. Notes:
+ Your telephone connects directly to a modular telephone line jack. if your phone line jack is not a modular jack, you can update the wiring yourself, using jacks and adapters available at your local RadioShack store. Or, you can let the phone company update the wiring for you.
+ The USOC number of the jack to be installed is RJ11C or RU11W. Use the supplied 12V, 200 mA AC/DC adapt-
er to power the phone. Cautions:
You must use a Class 2 power J source that supplies 12V DC and delivers at least 200 mA. Its center tip must be set to positive and its plug must fit the phone's DC 12V 200mA jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the phone or the adapter.
+ Always connect the AC adapter to the phone before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the phone. On a Desk Follow these steps to place the base on a desk or table using the supplied bracket. 1. Insert the brackets tabs into the base's upper tab slots in the direction of DESKTOP marked on the bracket, then press down on the brackets clips and insert them into the clip slots. 2. Plug one end of the supplied modular cord into the TEL LINE jack on the back of the base. 3. Plug the modular cords other end into a modular phone line jack. 4. Insert the supplied AC adapters barrel plug into the DC 12V 200mA jack on the back of the base. 5. Route the adapter's cord through the strain relief slot on the bracket. 6. Plug the adapter into a standard AC out-
let. 7. Lift the bases antenna to a vertical posi-
tion. On a Wall Plate or Wali 1. Insert the supplied bracket's tabs into the bases lower tab slots in the direction of WALL MOUNT marked on the bracket, then press down on the brackets clips and insert them into the clip slots. 2. Plug one end of the supplied short modu-
lar cord into the TEL LINE jack on the back of the base. 3 a a
{B55 43-3506.fm Page 4 Thursday, September 28, 2000 11:56 AM 3, Insert the supplied AC adapters barrel plug into the DC 12V 200mA jack on the back of the base. 4, Route the adapters cord through the nar-
row groove on the bottom of the bracket. 5. Plug the modular cord into the wall plate jack, then align the brackets keyhole slots with the wall plate studs and slide the base downward to secure it. 6. Plug the adapter into a standard AC out-
let. 7. Press and lift out the handset holder, turn it over and upside down so its tabbed edge faces up, then slide it back down into its slot. 8. Lift the base's antenna to a vertical posi-
tion. Note: To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the bot-
tom of the base. Follow the steps under On a Wall Plate or Wall on Page 3, then apply these additional instructions. 1. Drill two holes 3/16 inches (100 mm) apart. Then thread a screw into each hole, letting 7 the heads extend about 5/6 inch (8 mm) from = 3"
the wall. [
2. Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base. he 3. Align the keyhole slots with the mounting screws and slide the base downward to secure it. CONNECTING, CHARGING, AND REPLACING THE BATTERY PACK The phone comes with a rechargeable nickel-
cadmium battery pack. You must connect the battery pack and charge it for at least 12 hours before you use the phone for the first time. 1. Press down and slide off the battery pack compartment cover. 2. Unfasten the retainer strap and lift the battery pack out of the compartment. 3. Plug the battery packs connector into the socket in the compartment (the connector fits only one way), then replace the bat-
tery pack and fasten the retainer strap. 4, Replace the cover. To charge the battery pack, place the handset facedown or face up on the base. The CHARGE/IN USE indicator lights. Notes:
* Recharge the battery pack if the handset beeps twice every 7 seconds and the indicator in the handset's antenna flashes while you are using the phone. Or, if the indicator in the handset's antenna flashes when the phone is not in use. Sy Gk
<P? 75-3506.fm Page 5 Thursday, September 28, 2000 11:56 AM
+ When you first use the phone after charg-
ing or recharging the battery pack, the phone might not work. Return the hand-
set to the base for about 5 seconds to reset the security access-protection code.
+ About once a month, fully discharge the battery pack by keeping the phone off the base until the indicator in the antenna flashes slowly and the handset beeps twice every 7 seconds when the phone is in use. (When the phone is not in use, the indicator in the antenna flashes slowly.) Otherwise, the battery pack loses its abil-
ity to fully recharge.
+ If the CHARGE/IN USE indicator does not tight when you place the handset on the base, be sure the AC adapter is cor-
rectly and securely connected. Also, check the charging contacts on the hand-
set and base. If the contacts are dirty or tarnished, clean them with a pencil eraser. When the handset is on the base, the CHARGE/IN USE indicator lights even when the battery pack is not connected. If your phone does not work, be sure the battery pack is properly connected.
+ If the battery pack becomes completely discharged or the base loses power while the handset is away from it, place the handset on the base for about 5 seconds to reset the security access-protection code. If the handset loses power, leave it on the base to charge the battery pack.
+ If you will not use your phone for a long time, disconnect its battery pack. This helps increase the battery packs life. The supplied battery pack should last about a year. If the battery pack does not hold a charge for more than 2 hours after an over-
night charge, replace it with a new 3.6V, 600 mAh NiCd rechargeable battery pack with a connector that fits the socket in the battery compartment. You can order a replacement battery pack through your local RadioShack _le store. Install the new battery pack, place the handset on the base, and charge the battery for 12 hours before using it. Note: To avoid losing numbers stored in memory, you must install and begin charging the new battery pack within 2 minutes of re-
moving the old one. Warning: Dispose of the old battery pack promptly and properly. Do not burn or bury it. Cautions:
+ You must use a repiacement battery pack of the same size and type.
+ Do not dispose of the battery pack in a fire because it might explode.
+ Do not open or mutilate the battery pack.
+ Be careful not to short the battery pack by touching the connectors pins with con-
ducting materials, such as rings, brace-
lets, and keys. The battery pack or conductor might overheat and burn. If you have trouble replacing the battery pack, take the phone to your local RadioShack store for assistance. Important: The EPA certified RBRC Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates RadioShack is voluntarily participating in an in-
dustry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a con-
venient alternative to placing used Ni-Cd bat-
teries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-THE-SHACK (1-800-843-
7422) for information on Ni-Cd battery recy-
cling and disposal bans/restricttons in your ar-
ea. RadioShacks involvement in this program is part of the companys commitment to pre-
serving our environment and conserving our natural resources. e e
+e
iS a2 43-3506.fm Page 6 Thursday, September 28, 2000 11:56 AM ia, Qj A QUICK LOOK AT THE HANDSET Use an optional headset for handsfree convenience. Insert the */sz-inch plug into the headset jack to make or answer calls. Incoming Call and Battery Indicator Press the desired Emergency Memory Button to dial a stored emergency number (see Dialing a Memory Number on Page 9). Use TALK to make, answer, orend a call (see Making and Receiving Calls on Page 7). Press CH during a calt to change the phones channel and eliminate interference. The phone automatically selects a clear channel when you press TALK. Press MEM to store or recall num-
bers in memory (see Memory Di-
aling on Page 8). Press /TONE to use your phone companys special tone services when you are on a puise line (see Using Tone Services on a Pulse Line on Page 8). Press REDIAL/PAUSE to redial the Use FLASH for special phone services such as Call Waiting, If you have Cali Waiting, press FLASH to answer an in-
coming call without disconnecting the current call. If you do not have Call Waiting, pressing FLASH might dis-
connect your current call. Press EQ LOUD to activate the 3-Band Equalizer (see Adjusting the 3-Band Equal-
izer on Page 7). last number dialed, redial a number that is busy without hanging up, or enter a pause in a memory number. The redial memory also stores tone and pause entries (see Entering a Pause in a Memory Number on Page 9 and Using Tone Services ona Pulse Line on Page &).
43-3506.fm Page 7 Thursday, September 28, 2000 11:56 AM SETTING THE RINGERS RINGER OFF/ON on the side of the handset and RINGER ON/OFF on the back of the base control the handset and base ringers respec-
tively. To have the handset and base ring when a call comes in, set both ringers to ON and leave the handset off the base. To turn the ringers off, set RINGER to OFF. When both ringers are set to OFF, the handset and base do not ring, but you can still make outgoing calls. If you hear an extension tele-
phone ring, you can answer the incoming call on this phone. The indicator in the handsets antenna and the CHARGE/IN USE indicator on the base flash until you answer the call. Note: If you set both ringers to ON and the handset is on the base, only the base rings when a call comes in; the handset does not ting. If the base ringer is set to OFF and the handset is on the base with the handset ringer ON, you will not hear the phone ring when there is an incoming call. SETTING THE DIALING MODE Set TONE/PULSE on the bottom of the base for the type of service you have. If you are not sure which type you have, do this simple test after charging the battery pack. 1. Set TONE/PULSE to TONE. 2. Lift the handset from the base and press TALK so the bases CHARGE/IN USE and the handset antennas indicators light, then listen for a dial tone. 3. Press any number other than 0 and 1. Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code either. tf the dial tone stops, you have touch-
tone service. If the dial tone continues, you have pulse service. If you have tone service, leave TONE/PULSE set to TONE. If you have pulse service, set TONE/PULSE to PULSE. To hang up, place the handset on the base or press TALK. MAKING AND RECEIVING CALLS To make a call, lift the handset from the base, then press TALK. You hear a dial tone, and the bases CHARGE/IN USE and the handset antenna's indicators light. Dial the desired number. To answer a call, lift the handset off the base, then press TALK. The CHARGE/IN USE indi-
cator on the base and the handset antennas indicator light. Notes:
+ When you press a button, a single tone indicates that the phone has accepted the command. Three tones indicate that you pressed a button in error or there is severe interference. (See A Quick Look at the Handset on Page 6).
+ If interference is severe, the handset might lose communication with the base and the call might disconnect. If this hap-
pens, return the handset to the base for about 5 seconds to reset the security access-protection code. ADJUSTING THE 3-BAND EQUALIZER You can control the handsets frequency and volume by adjusting the 3-band (HI, MID, LOW frequency) equalizer on the back of the hand-
set. Press EQ OFF/ON on the side of the hand-
set or EQ LOUD on the keypad to turn on the equalizer. EQ LOUD lights when you press ei-
ther EQ OFF/ON or EQ LOUD to indicate the oe
2 43-3506.fim Page 8 Thursday, September 28, 2000 11:56 AM equalizer is on. Adjust the 3-band equalizer located on the back of the handset to the de-
sired level. Slide the bands toward MAX to in-
crease the sound, or towards MIN to decrease the sound level within each range. When you finish, press EQ OFF/ON or EQ LOUD to turn the equalizer off. EQ LOUD turns off. Notes:
* The equalizer resets to the normal level whenever you hang up the handset.
+ You can adjust the frequency and volume only when the equalizer is turned on. USING TONE SERVICES ON A PULSE LINE Some special services, such as bank by phone, require tone signals. If you have pulse service, you can still use these tone services by following these steps:
1. Dial the services main number. 2. When the service answers, press TONE/
*. Any additional numbers you dial are sent as tone signals. 3. After you complete the call, press TALK or return the handset to the base. The phone automatically resets to pulse dial-
ing. USING PAGE You can send a page to the handset to locate it when it is away from the base and not in use. To page the handset, press PAGE on the base. The handset beeps for about 15 sec-
onds. To find the handset, press and hold PAGE. The handset beeps for about 1 minute. Press any key on the handset or PAGE on the base to silence it sooner. MEMORY DIALING You can store up to 3 direct emergency num-
bers and 10 indirect memory numbers of 16 digits each in the phones memory. Notes:
* To keep your accounts secure, we recom-
mend you do not store your personal access code for services,such as bank by phone in a memory location.
+ When storing numbers for special ser-
vices (such as alternate long-distance or bank by phone), store the services main phone number in one memory location and numbers for additional information in other locations. Storing a Number in Memory 1. Press MEM. The handset antennas indi-
cator flashes. 2. Dial the desired number (up to 16 digits). 3. Press MEM again to store the number. 4. Press a memory location number (1-0) or one of the three emergency buttons. The handset sounds two long beeps. Note: If you hear three short beeps, you did not store the number successfully or you entered more than 16 digits. Start again from step 1. Pull the memory labe! out from the right side of the base and write the name in the respec-
tive memory location number on the memory label. Notes:
+ The handset beeps twice every 7 sec-
onds and the indicator in the antenna flashes slowly while the phone is in use. When the phone is not in use, the indica-
tor in the antenna flashes slowly. If this happens, recharge or replace the battery
ae}
43-3506.fm Page 9 Thursday, September 28, 2000 11:56 AM. within 2 minutes, or the numbers stored in memory will be fost.
+ If you receive a call while you are storing a number in memory, press TALK to answer the call. After the call, begin again at step 1.
+ To change a number stored in memory, simply store a new number in that mem-
ory location. Dialing a Memory Number To dial a direct emergency number, press TALK. When you hear the dial tone, press the desired emergency key. The phone dials the number. To dial an indirect memory number, press TALK. When you hear a dial tone, press MEM then the memory location number (1-0). The phone dials the number. Entering a Pause in a Memory Number In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an out-
side number. You can store the access code with the phone number. However, if you do, you should also store a pause after the ac-
cess code to allow the outside line time to connect. After entering the access code, press REDIAL to enter a 2-second pause. Chain Dialing Service Numbers To quickly recall special services numbers
(such as alternate long distance or bank by phone), store each group of numbers in its own memory location. When calling special services, dial the service's main number first. Then, at the appropriate place in call, press MEM, then the number for the location where the additional numbers are stored. Note: If you use pulse dialing, be sure you have stored a tone entry in another memory location (see Using Tone Services on a Pulse Line on Page 8). Testing Stored Emergency Numbers If you store an emergency services number
(police department, fire department, or ambu-
lance, for example) and you want to test the stored number, make the test call during the late evening or early morning to avoid peak demand periods. Remain on the line to ex-
plain the reason for your call. tr, | ay
\3P743-3506.fm Page 10 Thursday, September 28, 2000 11:56 AM
3 TROUBLESHOOTING We do not expect you have any problem with your telephone, but if you do, these suggestions might help. Probiem Suggestion
-_ The handset does not work. Move the handset closer to the base. Raise the base's antenna to a vertical position. Make sure the phone's modular cord and the AC adapter are correctly and securely connected. Recharge the handsets battery pack. Return the handset to the base for about 5 seconds to reset the security access-protection code. Make sure the handsets battery pack is connected and charged. The call is noisy. Keep the handset and the base away from interference sources such as computers, remote control toys, wireless alarm systems, wireless inter-
coms and room monitors, fluorescent lights, and electrical appliances. If the interference is severe, turn off the interfering device. :
Move the handset closer to the base. Hang up and redial the number. Press CH to change the channel. The range decreases. Recharge the handset's battery pack. The handset battery pack does not charge. Check the charging contacts on the handset and base. If they are dirty, clean them with a pencil eraser. Be sure the battery pack is connected correctly. Be sure the handset is properly seated on the base. Replace the battery pack (see Connecting, Charging, and Replacing The Battery Pack on Page 4). You can receive calls, but you cannot make calls. Set TONE/PULSE correctly for the type of service you have (see Setting the Dialing Mode on Page 7). Be sure the equalizer is turned on (see Adjusting the 3-Band Equalizer on Page 7). You cannot adjust the 3-band equalizer. If you still have problems, disconnect the phone. If other phones on the same tine work properly, the fault is in this phone or its installation. If you cannot find the problem, take the phone to your local RadioShack store for assistance. 43-3506.fm Page 11 Thursday, September 28, 2000 11:56 AM Sm, |<
T CARE Keep the phone dry; if it gets wet, wipe it dry immediately. Use and store the phone only in normal temperature environments. Handle the phone carefully; do not drop it. Keep the phone away from dust and dirt, and wipe it with a damp cloth occasionally to keep it look-
ing new. Modifying or tampering with the phones inter-
nal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. If your phone is not performing as it should, take it to your local RadioShack store for assistance. If the trouble is affecting the telephone lines, the phone company can ask you to disconnect your phone until you have resolved the prob-
lem. mm eo ot 43-3506,m Page 12 Thursday, September 28, 2000 11:56 AM uly 1 wy Limited One-Year Warranty This product is warranted by RadioShack against manufacturing defects in material and workman-
ship under normal use for one (1) year from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RE-
SPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, IN- +
CLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDEN-
TAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow iimitations on how iong an implied warranty lasts or the exclusion or limita-
tion of incidental or consequential damages, so the above limitations or exciusions may not apply to you. In the event of a product defect during the warranty period, take the product and the RadioShack f sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, un-
less otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor, (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the prop-
erty of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or maintenance, alteration, lightning or other incidence of excess voltage or current; {b) any repairs other than those provided by a RadioShack Authorized Service Facility, (c) consumables such as fuses or batteries; () cosmetic damage: (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102 We Service What We Sell 43-3506 RadioShack Corporation 0gA00 Fort Worth, Texas 76102 Printed in China