| $ 33-1196.fm Page f Tuesday, January 15, 2002 3:54PM RS | @
9O0OMHz Rechargeable Wireless Stereo Headphones 33-1196 OWNER'S MANUAL Please read before using this equipment. Thank you for purchasing RadioShack Rechargeable 900MHz Wireless Stereo Headphones. Your headphones use the 900MHz band to deliver high-quality stereo sound to almost anywhere in or around your home. Your headphones use PLL (Phase-Locked Loop) circuitry and have a built-in antenna to give you precise tuning, so you can enjoy your favorite sounds without disturbing others anywhere around your yard or house up fo 150 feet away from your stereo. es CONTENTS Choosing a Lacatio:
Using AC Power Installing Batteries .. Charging Rechargeable Batteries .... Recycling Ni-Cd Batteries
- Connecting to an Audio Source . Listening Safely ...... Using Your Headphones Troubleshooting ........ The FCC Wants You to Know . CAPE sesessssreee Service and Repair Specifications Parts and Accessories .. POWER indicator lights red when the AC adapter is correctly plugged in and you press POWER. VNN Onna 7 CHARGE Indicator lights green when
- the batteries are charging. 2002 RadioShack Corporation. All Rights Reserved. RadioShack and RadioShack.com are trademarks Ra dioShack. used by RadioShack Corporation. www.radioshack.com Oe a ered elo ERAN To1e1 tT)
@ 33-1196.fm Page 2 Tuesday, January 15, 2002 3:54 PM re
CHOOSING A LOCATION Many factors affect the range of your system. To achieve the best performance:
+ Position the transmitter as far as possible from other electronic devices such as TVs, receivers, or VCRs. Radio interference from these devices could affect your system's performance.
+ Position the transmitter away from large metal objects, as these could block your transmitter's signals. Try severat locations for the transmitter. Select the location that provides the best performance. Your systems overall performance depends on your home's construction method, the other devices near the system, and other radio frequency sources in, your home (such as cordless telephones). USING AC POW Use the supplied transmitter to AC;
idapter to connect the Cadapters barrel plug into the 42V jack, then plug the adapter into a uitlet. ale ur headphones require three AAA alkaline batteries or able batteries (neither supplied) for power. &&
. Remove the battery compartment cover on the left earpiece by pulling the side of the cover and lifting the cover off. if you are using alkaline batteries, set ALK/RCH inside the compartment fo ALK. if you are using rechargeable batteries, set ALK/RCH to RCH. Place the batteries in the compartment according to the polarity symbols (+ and ) marked in the compartment. 4, Slide the cover back on until it clicks into place. o 33-1196.fim Page 3 Tuesday, January 15,2002 3:54PM
!f the headphones range decreases, you do not hear sound from the audio source, or the headphones POWER/BATT AN SOL PANN LOW indicator is blinking, replace the alkaline batteries or eS le ee ce eed recharge the rechargeable batteries. A\ and properly. Do not burn or bury ct a CHARGING RECHARGEABLE BATTERIES Your transmitter has a built-in charger to charge rechargeable batteries. When the headphones are not in use, the rechargeable battery can be continuously charged over several days. The batteries can be charged with the transmitter set to on or off. 1. Turn off the headphones and remove the battery compartment cover on the left earpiece. !
i 2. Select ALK/RGH to RCH. a 3. Place the rechargeable batteries in the compartment according to the polarity symbols (+ and ) marked jn the compartment. Charging Rechargeable Batteries 4. Replace the cover. 5. Lift the charging compartment cover of] the transmitter to open and pull out the charging cor DC IN 4.5V. Charging Cord Dc IN 12V my Ue-to-"4-inch Stereo Adapter 6. Plug the charging barrel piug into the DC IN 4.5V jack on the left earpiece.