all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 2.97 MiB | April 08 2003 | |||
1 | Attestation Statements | April 08 2003 | ||||||
1 | Block Diagram | April 08 2003 | ||||||
1 | Test Report | April 08 2003 | ||||||
1 | External Photos | April 08 2003 | ||||||
1 | ID Label/Location Info | April 08 2003 | ||||||
1 | Internal Photos | April 08 2003 | ||||||
1 | Operational Description | April 08 2003 | ||||||
1 | Schematics | April 08 2003 | ||||||
1 | Test Report | April 08 2003 | ||||||
1 | Test Setup Photos | April 08 2003 |
1 | Users Manual | Users Manual | 2.97 MiB | April 08 2003 |
RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 1 T F A R H. D T 4 RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 2 8-IN-ONE REMOTE POWERED BY KAMELEON TABLE OF CONTENTS Introduction . 2 How Kameleon Works . 2 Installing Batteries . 3 Battery Use And Safety . 3 About Battery Life . 3 Installing Batteries In The Remote . 3 About The Finder Transmitter . 4 A Quick Look At The Controls . 4 Key Functions . 5 Device Table . 9 Adjusting Brightness. 9 Programming A Device . 10 Programming A DVD Player/VCR Combo . 11 Searching For Your Code. 12 Checking The Codes . 13 Using Learning . 14 Learning Precautions . 14 Programming A Learning Key . 14 Deleting A Single Learned Key . 15 Deleting All Learned Keys In A Specific Mode. 16 Changing Volume Lock . 16 Locking Volume Control To One Mode. 16 Unlocking Volume Control For A Single Device . 17 Unlocking All Volume Control. 17 Using Macros . 18 Programming A Favorite Channel Macro . 18 Programming A Master Power Macro In My System Mode . 19 Programming The COM MUTE Key . 19 Clearing A Macro . 20 Using Keymover . 20 Programming Keymover . 20 Restoring A Single Keymoved Key . 21 Restoring All Keymoved Keys In A Single Mode . 21 Programming Favorite Channel Scan . 22 Using Channel Scan . 22 Using My System Mode . 23 Control Organization . 23 Programming My System Mode . 23 Reassigning Device Keys . 25 Using Commercial Skip. 25 Using The Default Settings . 25 Programming Commercial Skip. 25 Setting The Tilt Switch . 26 Disabling The Tilt Switch. 26 Enabling The Tilt Switch . 27 Setting The Finder Receiver . 27 Disabling The Finder Receiver . 27 Enabling The Finder Receiver . 28 Restoring Factory Default Settings . 28 Clearing All Custom Programming . 29 Specifications. 29 About Upgrading . 30 Troubleshooting . 30 Device Menu Screens. 32 2 Table Of Contents/Introduction Care . 38 Additional Information . 38 Instruction To The User . 38 Limited 90-Day Warranty . 39 Manual De Deuo . 40 Manufacturers Codes . 80 Setup Codes For Audio Amplifiers . 80 Setup Codes For Audio Receivers. 80 Setup Codes For Cable Boxes . 80 Setup Codes For CD Players . 81 Setup Codes For DVD Players. 82 Setup Codes For DVD Player/VCR Combos . 82 Setup Codes For Home-Theater-in-a-Box Devices . 83 Setup Codes For PVRs. 83 Setup Codes For Satellite Receivers. 83 Setup Codes For TVs . 83 Setup Codes For TV/DVD Player Combos . 85 Setup Codes For TV/VCR Combos . 86 Setup Codes For VCRs. 86 Setup Codes For Video Accessories . 88 INTRODUCTION The RadioShack 8-in-One Remote powered by Kameleon is a revolutionary universal remote control that uses Universal ElectronicsKameleon Technology. It is designed to control up to eight home entertainment devices,including TV,video, and audio components. After installing four (4) new AAA alkaline batteries (not included), you can immediately use the remote to control an RCA TV,VCR, DVD Player, and Satellite Receiver, a Motorola Cable Box, a Tivo PVR (DVR), and a Pioneer CD Player and Audio Receiver. To control other brands, please perform the instructions in Programming A Device on page 10. HOW KAMELEON WORKS The RadioShack 8-in-One Remote Powered By Kameleon provides the versatility of an LCD remote control with the feel of a traditional push button unit. The result is a stunning, bright display with engaging animation and touch-sensitive graphics for the user. RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 3 The remote control includes convenient Menu Driven programming. The displays are divided into two types of interactive screens: Device Menus for normal remote control use, and Programming Menus for feature setup.Acting like its namesake, Kameleon changes the Device Menu for the device being selected. For example, selecting TV displays a main menu that contains channel selection, volume control, and a keypad. However, selecting a DVD player still displays a menu with those same keys as the TV, but now navigation keys and transport controls are added for the DVD device. Several devices have a second menu that can be accessed using SCREEN (see Device Menu Screens, starting on page 32).For example,TV has two menus: a main menu with extra feature keys for COM MUTE,+100,ENTER,SLEEP,TV/VCR,and PIP functions,and a second menu screen that adds navigation keys but removes the extra feature keys. This way a user has the flexibility to use any menu screen that works best for the selected device. NOTE: Even though SCREEN is displayed in all modes, only TV, CD, and AUD modes have a second menu screen. Animated key graphics also provided enhanced operational feedback, so the user can easily see what mode is active and when the commands are communicating with a device. The end result of Kameleon technology is a simple, elegant, and intelligent way of organizing a large number of remote control keys for eight different devices. INSTALLING BATTERIES BATTERY USE AND SAFETY Use only fresh batteries of the required size and recommended type. Do not mix old and new batteries, different types of batteries (e.g., standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. OWNERS MANUAL If you do not plan to use the remote for an extended period, remove the batteries. They can leak chemicals that can destroy electronic parts. WARNING: Dispose of old batteries promptly and properly. Do not burn or bury them. ABOUT BATTERY LIFE As with all battery-operated devices, battery life will vary depending on use, including frequency and duration of key presses on the Kameleon screen. Battery life may be extended by:
Reducing the brightness level of the display screen (see Adjusting Brightness on page 9). Disabling the Kameleon tilt on feature
(see Setting The Tilt Switch on page 26). Disabling the Kameleon Finder feature
(see Setting The Finder Receiver on page 27). INSTALLING BATTERIES IN THE REMOTE Your remote requires four AAA batteries (not supplied) for power. continued on next page... How Kameleon Works/Installing Batteries 3 RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 4 8-IN-ONE REMOTE POWERED BY KAMELEON INSTALLING BATTERIES INSTALLING BATTERIES IN THE REMOTE (CONTD) 1. Press down on the battery compartment cover (on the back of the remote) and lift it off. 2. Slide the AAA batteries into the compartment as indicated by the polarity symbols (+ and ) shown above. 3. Align the cover with the compartment opening and slide it back into place. 4. If batteries are inserted correctly, the display will turn on and show all keys. If a key is not pressed after 7 seconds, the display will turn off. NOTE: The batteries will need replacement if one of the following conditions occurs:
1. The top IR segment flashes five times after pressing a key. 2. The Tilt Switch (if enabled, see page 26) no longer activates the remote and only pressing a key turns on the display. ABOUT THE FINDER TRANSMITTER NOTE: If you do not plan to use the Finder Transmitter, store it away for future use and skip this section. Included in the package is a Finder Transmitter that you can use to audibly locate a lost or mis-
placed RadioShack 8-in-One Remote. The unit also comes with double-sided hook and loop tape for use in mounting it on a TV cabinet side or other surface. The Finder Transmitter requires a 9-volt battery
(not supplied) for power. For best performance and longest life, we recommend using a RadioShack alkaline battery. INSTALLING A BATTERY IN THE FINDER TRANSMITTER 1. Press down on the battery compartment cover (on the front of the Finder Transmitter) and slide it off. 2. Locate the snap harness and connect the 9-volt battery to mating terminals.Then insert the battery and harness into the compartment. 3. Align the cover with the compartment opening and slide it back into place. OPERATING THE FINDER TRANSMITTER 1. Point the Finder Transmitter in the general direction of the lost RadioShack 8-in-One Remote. Press and hold its button. 2. The lost RadioShack 8-in-One Remote will emit an chirping sound to help you find it. NOTE: If the RadioShack 8-in-One Remote does not emit a chirping sound, verify the Finder Receiver is enabled (see page 28) and the battery is fresh. A QUICK LOOK AT THE CONTROLS Use the illustration on the next page to locate controls and then study the Key Functions to learn how they function. NOTE: The illustration shows all remote control keys. In actual operation, only active keys used by the selected device are displayed and non-active keys are hidden. These controls work like the ones found on your original remote controls. To find out what type of devices can be controlled by each device key after programming, see the Device Table on page 9. 4 Installing Batteries/A Quick Look At The Controls RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 5 To find out what keys appear when the program mode is activated or when a device is selected, see the Device Menu Screens section starting on page 32. Included are brief descriptions of how the keys work for each displayed screen. KEY FUNCTIONS OWNERS MANUAL When a key is pressed, the IR Segments will animate. Outgoing animation (see arrow) indicates the remote is sending IR signals to a selected device. Incoming animation indicates the remote is receiving IR signals from a device being learned (see Using Learning on page 14). During programming, the bottom IR segment flashes to confirm setup actions. Press CBL,SAT,TV,DVD, AUD,VCR,AUX, or CD once to select a device to control. The selected device key will animate to indicate it is currently active.Also see the Device Table on page 9. After programming, press MY SYSTEM once to select your custom system controls. See Using My System Mode on page 23. Use P to enable the programming screen. In the CBL or SAT mode, use PAGE+ or PAGE- to page up or page down through channels in the program guide. Press PWR once to turn on or off a selected device. continued on next page... A Quick Look At The Controls 5 RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 6 8-IN-ONE REMOTE POWERED BY KAMELEON A QUICK LOOK AT THE CONTROLS KEY FUNCTIONS (CONTINUED) Use the navigation keys as follows:
Use MENU to display the your devices main menu. In the TV,CD, or AUD mode, the selected devices main menu screen will appear. Use GUIDE to display your devices program guide, or setup or program menu. In the TV,CD, or AUD mode, the selected devices main menu screen will appear. Use INFO to display the current channel and program information. Use EXIT to exit from your devices guide or menu. or
, or
) to navigate Use the cursor keys (L , M, LL through the program guide and menu screens. In the CD mode, use L (or M) to select the next (or previous) disc. In the AUD mode, use L
(or M) to raise (or lower) rear channel volume and use
) to balance audio left (or right). Use OK to choose options from your devices menu or guide. Press LAST once to recall the last channel. In the CD or AUD mode,use LAST to repeat the last track.
(or L L 6 A Quick Look At The Controls In the TV, CD, or AUD mode, use SCREEN to view additional key screens for the selected device. In all modes except CD, DVD, and AUD, use FAV SCAN to scan through all channels, or after program-
ming, to scan through 10 favorite channels. Use VOL L (or VOL M) to raise (or lower) volume for the selected device
(also see Changing Volume Lock on page 16). Press MUTE once to turn the sound off or on. In all modes except CD and DVD, use CH L (or CH M) to select the next higher (or lower) channel. In the CD or DVD mode, use SKIP L (or SKIP M) to select the next (or previous) track or chapter. After programming, in the CBL, SAT, TV, VCR, or AUX mode use COM MUTE to drop the volume to preset level and raise it back to its original level. See Using Macros on page 18. During programming, the home key will appear. Use it to exit the program screen or to return to the previous device key screen. RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 7 In the CBL,SAT,VCR,or AUX mode,use COM SKIP to skip commercials on devices with PVR capabilities (see Using Commercial Skip on page 25). In all modes except AUD, use the number keys
(1 ~ 9 and 0) to directly select channels (e.g., 009 or 031) or enter numbers. In the AUD mode, INPUT will appear. Use the num-
ber keys to directly select inputs 1 ~ 9 and 10. For certain brands in all modes except CD,press ENTER once after entering numbers (if required on original remote control). In the TV mode,use +100 to enter numbers above 100 (if required on original remote control).In the CD or DVD mode,use +100 to access tracks above 10 (if required on original remote control). In the AUD mode,use +100 to change the radio band. In the program mode, use the program keys to personalize the remote control as follows:
Use DEV SET to program your device codes.See Programming A Device on page 10. Use SEARCH as an alternate way to set up a device by searching available codes. See Searching For Your Code on page 12. NOTE: Press above the title to activate a desired program. For OTHER, press below the title. NOTE: Press above the title to activate a desired program. For OTHER, press below the title. OWNERS MANUAL Use MACRO to program a series of commands on five available macro keys. See Using Macros on page 18. Use VOL to set volume controls for individual or global device use.See Changing Volume Lock on page 16. Use MY SYSTEM to create a custom mode with favorite remote control keys from different devices in your home theater system. See Using My System Mode on page 23. L Use to adjust the bright-
ness level of the EL display. See Adjusting Brightness on page 9. Use IR LEARN and IR DELETE to add and delete key functions learned from your original device remote controls. See Using Learning on page 14. Use MODE to reassign an unused device key to control a second device. See Reassigning Device Keys on page 25. Use OTHER to program other functions. See Table of Contents on page 2 for sections on Checking The Codes, Programming Favorite Channel Scan, Using Keymover, Program-
ming Commercial Skip, Upgrading, Restoring Default Settings, or Clearing Programming. A Quick Look At The Controls 7 RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 8 8-IN-ONE REMOTE POWERED BY KAMELEON A QUICK LOOK AT THE CONTROLS KEY FUNCTIONS (CONTINUED) In the CBL, SAT, VCR or AUX mode, use SLEEP to activate your devices sleep timer (if one is available for the device). In the CBL or SAT mode, use A/B to act as your cable boxs or satellite receivers A/B switch. In the TV,VCR, or DVD mode, use TV/VCR to switch the TVs input to view TV or video programs. In the AUD mode, use TV/VCR to switch between program and input. In the AUD mode, use S.SND to turn surround sound on or off.Also see cursor keys on page 6. In the CD, DVD, AUD, VCR, or AUX mode, use the transport keys (i.e., REW, PLAY, FWD, PAUSE, and STOP) to control the devices transport. Press REC twice to record a pro-
gram on your device (if the function is available). In the CBL or SAT mode, use the transport keys to control VOD (Video On Demand) or PVR, if avail-
able on your cable/satellite service. 8 A Quick Look At The Controls In the CBL, SAT, VCR, or AUX mode, use the replay key to instantly replay the last 7 seconds of a program you are watching (if feature is available). In the CBL, SAT, or AUX mode, use the advance key to skip past commercials or other uninteresting scenes (if the feature is available). In the DVD or CD mode, use the advance key to change discs. In the CBL, SAT, VCR, or AUX mode, use LIVE TV to switch between live TV and video programming (if feature is available). In the CBL,SAT,VCR,DVD, or AUX mode, use the slow key to view slow motion video (if feature is available). Use PIP to switch the Picture-In-Picture feature on or off. Use MOVE to move the window picture to different places in the main picture. Press FRZ once to capture a frame of video in the main picture. Press it again to resume normal viewing. Use SWAP to switch images and sound between the main and window pictures. After programming, press M1 ~ M4 once to run a macro (see Using Macros on page 18). RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 9 DEVICE TABLE NOTE: Please refer to the table below when performing the instructions in Programming A Device on the next page. After programming, the RadioShack 8-in-One Remote will be able to control the following types of devices:
DEVICE KEY CONTROLS THESE DEVICES OWNERS MANUAL ADJUSTING BRIGHTNESS The RadioShack 8-in-One Remote has five levels of brightness adjustment and is set to the middle one at the factory. To increase or decrease the brightness, perform the following steps:
1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear. NOTE: If the display turns off because of inactivity, you will need to start the programming sequence again by repeating this step. 2. Press once.The Brightness programming screen will appear:
Cable Box (Converter) or Video Accessory Satellite Receiver or Satellite/PVR Combo Television DVD Player, TV/DVD Player Combo, or DVD/VCR Player Combo Audio Amplifier,Audio Receiver, or Home-Theater in-a-Box (HTiB) Device VCR, TV/VCR Combo, or PVR (DVR) PVR (DVR),VCR, or TV/VCR Combo CD Player or CD Recorder To increase brightness, press L one or more times. To decrease brightness, press Mone or more times. 3. When desired brightness is achieved, press twice to exit programming and return to the last-selected device menu screen. NOTE: The remote includes a tilt switch that turns on the display when the unit is moved. If desired, you can disable this feature. See Setting The Tilt Switch on page 26. A Quick Look At The Controls/Adjusting Brightness 9 RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 10 8-IN-ONE REMOTE POWERED BY KAMELEON PROGRAMMING A DEVICE The RadioShack 8-in-One Remote is preset at the factory to operate the following devices:
Motorola Cable Box RCA TV,VCR, DVD Player, and Satellite Receiver Pioneer CD Player and Audio Receiver Philips Tivo PVR (DVR) using the AUX key To control devices other than the default brands, perform the following steps; otherwise skip this section:
NOTE: To control a DVD Player/VCR Combo, perform the instructions in Programming A DVD Player/VCR Combo on page 11. 1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 9 completely before proceeding. Before starting step 2, review the Manufacturers Codes (starting on page 80). Brands are listed alphabetically in order of the most popular codes first. Highlight or write down the devices and the codes you wish to program. 2. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
NOTE: If the display turns off due to inactivity, the remote control will exit programming and return to the last-selected device menu screen. To start programming again, repeat this step. NOTE: To stop programming at any time, press once to return to the program keys screen. Press once more to exit completely. 10 Programming A Device 3. Press DEV SET once. The Device Setup programming screen will appear:
4. Press a device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD). The selected device key will animate. NOTE: Refer to the Device Table on the previous page when choosing a device key for programming. 5. Use the Manufacturers Codes (starting on page 80) to locate the type of device and brand name and then use the number keys to enter the first four-digit code for your device. If performed correctly, the bottom IR segment will flash twice. NOTE: If the bottom IR segment displays one long flash instead, a mistake has occurred. Try entering the same code again. 6. Aim the remote at the device and press PWR once. The device should turn off. If it does not, repeat steps 5 and 6, trying each code for your brand until you find one that works. If it still doesnt work, try Searching For Your Code on page 12. If the code works, press OK once. The bottom IR segment flashes twice. 7. RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 11 OWNERS MANUAL PROGRAMMING A DVD PLAYER/VCR COMBO NOTE: If you own a Sylvania TV/DVD Player Combo with a separate TV code (see page 85), use the below steps to program it with these changes: in step 5 (on the next page), enter 0675 as the DVD code; in step 8a, substitute TV for VCR; and in step 8b enter 0171 as the TV code. 1. Turn on the DVD Player/VCR Combo and insert a DVD. NOTE: Please read steps 2 to 8 completely before pro-
ceeding. Review the Setup Codes For DVD Player/
VCR Combos(on page 82). Highlight or write down the brand and the codes you wish to program. 2. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
8. If desired, repeat steps 4 through 7 for each device you want to control.When finished, press return to the last-selected device menu screen. twice to exit programming and 9. For future reference, write down each working device code in the following boxes:
CBL Code:
Brand Name:_______________________ SAT Code:
Brand Name:_______________________ TV Code:
Brand Name:_______________________ DVD Code:
Brand Name:_______________________ AUD Code:
3. Press DEV SET once. The Device Setup programming screen will appear:
Brand Name:_______________________ VCR Code:
Brand Name:_______________________ AUX Code:
Brand Name:_______________________ CD Code:
Brand Name:_______________________ 4. Press DVD once. The key will animate. continued on next page... Programming A Device/Programming A DVD Player/VCR Combo 11 RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 12 8-IN-ONE REMOTE POWERED BY KAMELEON PROGRAMMING A DVD PLAYER/
VCR COMBO (continued) 5. Use the Setup Codes For DVD Player/VCR Combos (on page 82) to locate the brand name and use the number keys to enter the four-
digit code for your device. If performed cor-
rectly, the bottom IR segment will flash twice. NOTE: If the bottom IR segment displays one long flash instead, an error has occurred. Try entering the same code again. 6. Aim the remote at the device and press PWR once. The device should turn off. Press OK once to save the code. The bottom IR segment flashes twice. 7.
(Optional) If youve located a setup code that works,but it also has a separate VCR code as listed on page 85,youll need to program it into the remote to access VCR controls,as follows:
a. Press VCR once. b. Using the number keys, enter the four-
digit VCR code for your DVD Player/VCR Combo. If performed correctly, the bottom IR segment will flash twice. c. Press OK once. The bottom IR segment displays one long flash. NOTE: If a VCR setup code is not listed, you can use the VCR key to program a separate VCR or another device (see Reassigning Device Keys on page 25). 8. To exit programming, press twice. The display returns to the last-selected device menu screen. For future reference, write the working code in the below boxes:
DVD Player/VCR Code:
Brand Name:_______________________ VCR Code (if used):
Brand Name:_______________________ SEARCHING FOR YOUR CODE If your device does not respond to the RadioShack 8-in-One Remote after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code. NOTE: Before performing a code search for a CD or DVD player or a VCR, turn on the device and insert the required media. For example, to search for a code for your TV:
1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press SEARCH once.The Search Codes programming screen will appear:
3. Press a device key once (e.g., TV). The selected device key will animate.The devices Main Menu screen will appear with still displayed. 4. Press PWR once to select it as the search test function. The Search Programming screen will appear again. NOTE: With PWR as the search test function, a Power On IR command will be sent to the device 12 Programming A DVD Player/VCR Combo/Searching For Your Code RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 13 each time a test code is sent. As a confirmation, the IR segments will display an outgoing animation. NOTE: If your device or its original remote control does not have a Power key, select a different test function in this step (e.g., CH+, VOL+, PLAY, etc). 5. Aim the remote at the device (e.g.,TV) press L one or more times and stop when a working code performs the test function selected in step 4. If desired, use M to try a previous code. NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first. 6. To lock in the code, press OK once. The bottom IR segment flashes twice. 7. To search for codes of your other devices, repeat steps 3 to 6, but use the appropriate device key and test function key for the device you are searching for. 8. To exit programming, press twice. The display will return to the last-selected device menu screen. CHECKING THE CODES If you have set up the RadioShack 8-in-One Remote using the Searching For Your Code procedure (on the left), you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV:
1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
OWNERS MANUAL 2. Press OTHER once.The Other programming screen will appear:
3. Using the number keys, enter 9 9 0. The screen flashes twice and changes to the Code Verification screen. 4. Press a desired device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD). The selected device key will animate. 5. To view the code for the first digit, press 1 once. Count the number of times the bottom IR segment flashes (e.g., three flashes = 3) and write down the number in leftmost box in the TV code boxes on page 11. NOTE: If a code digit is 0, the bottom IR segment will not flash. 6. Repeat step 5 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.Write down the code digits in the remaining TV code boxes on page 11. NOTE: If you enter an invalid number (e.g., 7) or key (e.g., PLAY), the bottom IR segment will display one long flash and return to the Other program-
ming screen. Start again with step 2 above. continued on next page... Searching For Your Code/Checking The Codes 13 RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 14 8-IN-ONE REMOTE POWERED BY KAMELEON CHECKING THE CODES (contd) 7. To check for codes of other devices, repeat steps 4 to 6 (on the previous page), but substitute the appropriate device key for each device you are checking.Write down the devices code digits in the appropriate code boxes on page 11. 8. To exit programming, press twice. The display will return to the last-selected device menu screen. USING LEARNING The RadioShack 8-in-One Remote includes a Learning feature so you can add functions that are unique to your home entertainment devices
(e.g.,VCR Tracking Up or Down). However, there are some considerations:
LEARNING PRECAUTIONS Your original remote controls must be in working order for learning to work properly. Learned keys are mode specific, so each one can store a unique function for each mode. Learned keys can be used in macros (see Using Macros on page 18). Do not use the following keys for learning:
P, SCREEN, M1 ~ M4, FAV SCAN, COM SKIP, COM MUTE, or any Device Key. Learning capacity is approximately 16 to 25 keys, depending on the code being learned. If both learned and keymoved functions are assigned to the same key, the last programmed function will be stored. A learned function cannot be used as a source for Keymover (see Using Keymover on page 20). 14 Checking The Codes/Using Learning Certain device codes are not learnable, including multi-frequency types, some high-frequency ones, and other unusual formats. For optimum learning, avoid high levels of ambient light such as natural sunlight or energy-efficient fluorescent lights. NOTE: Please have your original remote controls handy before programming learning. Be sure to press each teaching key within 5 seconds of the previous entry. Otherwise, the RadioShack 8-in-One Remote will exit the programming mode. PROGRAMMING A LEARNING KEY 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press IR LEARN once. The IR Learn programming screen will appear:
3. Press a device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD) to assign a mode for learning. The selected device menu screen, including
, will be displayed. 4. Place the RadioShack 8-in-One Remote head-to-head (about 2" apart, as shown on the next page) from your original remote control.Also locate the key (on your original remote control) that will serve as the teaching function. RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 15 OWNERS MANUAL DELETING A SINGLE LEARNED KEY 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2"
5. On the RadioShack 8-in-One Remote, select and press a desired key where the learned function will be stored. The IR segments will display an incoming animation, continue for three revolutions, and then the entire display will turn off. After the display is off, press and hold the teaching key (on your original remote control) until the display (on the RadioShack 8-in-One Remote) turns on again.The bottom IR segment will flash twice when the code is successfully captured. NOTE: If the bottom IR segment displays one long flash, a learning error has occurred. Try repeating this step again until a successful capture occurs. If the function is still not captured, press exit programming and review the Learning Precautionson the previous page. If needed, also see Troubleshootingon page 30.After review, start programming again at step 1. twice to 6. To learn other functions, repeat steps 3 through 5 as desired. 7. To exit programming, press twice. The display will return to the last-selected device menu screen. 2. Press IR DELETE once. The IR Delete programming screen will appear:
3. Press a device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD) for the mode where the learned key to be deleted resides. The selected device menu screen, including will be displayed.
, 4. Press the learned key to be deleted twice. Upon deletion, the bottom IR segment will flash twice as confirmation. The program keys will appear again. 5. If desired, repeat steps 2 through 4 to delete another learned key. 6. Exit programming by pressing once. The display will return to the last-selected device menu screen. Using Learning 15 RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 16 8-IN-ONE REMOTE POWERED BY KAMELEON USING LEARNING (continued) DELETING ALL LEARNED KEYS IN A SPECIFIC MODE 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press IR DELETE once. The IR Delete programming screen will appear:
CHANGING VOLUME LOCK The RadioShack 8-in-One Remote is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a devices volume will be locked to one mode (e.g., to control TV volume in all other modes). After that, if desired, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation. LOCKING VOLUME CONTROL TO ONE MODE
(GLOBAL VOLUME LOCK) 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
3. Press a device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD) for the mode where the learned keys to be deleted reside.The selected device menu screen, including will be displayed.
, 4. Press the same device key (as in step 3) once. Upon deletion, the bottom IR segment will flash twice as confirmation. The program keys will appear again. 5. If desired, repeat steps 2 through 4 to delete other learned keys from another mode. 6. Exit programming by pressing once. The display will return to the last-selected device menu screen. 16 Using Learning/Changing Volume Lock 2. Press VOL once. TheVolume Lock programming screen will appear:
3. Press a device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD) where you want the volume controls locked to. The bottom IR segment will flash twice and the program keys will appear again. RS Kameleon 8in1 UG 7/9/03 1:02 PM Page 17 OWNERS MANUAL 6. Now, after you select a device that has volume unlocked, pressing VOL L, VOL M, or MUTE will control the devices volume only in its own mode. UNLOCKING ALL VOLUME CONTROL
(RESTORING DEFAULT SETTING) 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
4. To exit programming, press once. The display will return to the last-selected device menu screen. 5. Now, when you press VOL L, VOL M, or MUTE, the selected devices volume will be con-
trolled, regardless of the mode selected. UNLOCKING VOLUME CONTROL FOR A SINGLE DEVICE (INDIVIDUAL VOLUME UNLOCK) 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press VOL once. The Volume Lock programming screen will appear:
2. Press VOL once. The Volume Lock programming screen will appear:
3. Press VOLM once.Then press a device key once
(i.e.,CBL,SAT,TV,DVD,AUD,VCR,AUX,or CD) where you want the volume controls unlocked. The bottom IR segment will flash four times and the program keys will appear again. 4. If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked. 5. To exit programming, press once. The display will return to the last-selected device menu screen. 3. Press VOL L once. The bottom IR segment will flash four times and the program keys will appear again. 4. To exit programming, press once. The display will return to the last-selected device menu screen. 5. Volume will again be independently controlled according to its default states for all programmed devices. Changing Volume Lock 17 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 18 8-IN-ONE REMOTE POWERED BY KAMELEON 2. Press MACRO once. The Macro programming screen will appear:
3. Press an open macro key (e.g., M1, M2, M3, or M4). The last-selected device menu screen, including
, will be displayed. 4. Enter a desired macro sequence of up to 15 key presses. For this example, press TV once, followed by PWR once, and then enter 0 3 for the TVs channel number. Next, press CBL once, followed by PWR once, and then enter 0 7 1 for the Cable Boxs channel number. NOTE: If there are more than 15 key presses in the sequence, the bottom IR segment will display a long flash, denoting an error. The display will return to the last-selected device menu screen. To program the macro, start again with step 3. 5. To save the macro, press and hold P until the bottom IR segment flashes twice. The program keys will appear again. 6. Exit programming by pressing once. The display will return to the last-selected device menu screen. 7. Now, if you aim the remote at the devices selected in step 4 and press the programmed macro key once, the TV will turn on and tune to channel 3. Then, the Cable Box will turn on and tune to channel 071. USING MACROS The RadioShack 8-in-One Remote includes six macro keys: M1 through M4, COM MUTE, and PWR. Each one can be set up to perform a repetitive, time-consuming operation with the press of a single key. NOTE: A macro programmed onto the PWR key can only be accessed in the MY SYSTEM mode. Pressing it in any other mode will only send a Power On/Off IR command to the selected device. NOTE: The COM MUTE key can be programmed as a two-state rotating macro. See Programming The COM MUTE Key on the next page. A macro can be used to control a home theater operation, to set a favorite channel, or for other multiple functions you would like to control with one key press. Moreover, each macro key can hold up to 15 key presses total. NOTE: Programming a new macro over an existing one will erase the original macro. PROGRAMMING A FAVORITE CHANNEL MACRO With so many channels available on your cable or satellite system, you can program a macro that directly selects a favorite channel with one key press. For example, lets assume your favorite cable programs are on channel 71. Use the following instructions to program a macro for direct access of this channel:
NOTE: The following example assumes all equipment is turned off and that the TV is connected through the Cable Box with TV tuning set to channel 3. 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
18 Using Macros RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 19 PROGRAMMING A MASTER POWER MACRO IN MY SYSTEM MODE A macro can be programmed onto the PWR key to turn on or off as many as seven home theater devices. NOTE: This following example assumes the Home Theater system contains a Satellite Receiver, a DVD Player, an Audio Receiver, and a TV. 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press MACRO once. The Macro programming screen will appear:
OWNERS MANUAL 7. To test the power macro, first make sure all home theater devices selected in step 4 are turned on.Aim the remote control at the devices and press MY SYSTEM once, followed by PWR once. The devices should turn off in this order: Satellite Receiver, DVD Player, Audio Receiver, and TV. To turn on the devices on again in the same order as above, press PWR once. PROGRAMMING THE COM MUTE KEY If desired, a two-state rotating macro can be programmed onto the COM MUTE key, so a key press will drop volume (in the CBL, SAT, TV, VCR or AUX mode) to a preset level during a com-
mercial. When the program resumes, another key press will raise it back to the original level. 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
3. Press PWR once.The last-selected device menu screen, including
, will be displayed. 4. Enter the macro sequence. For this example, press SAT once, followed by PWR once. Next, press DVD once, followed by PWR once. Then press AUD once, followed by PWR once. Finally, press TV once, followed by PWR once, and then MY SYSTEM once. 5. To save the power macro, press and hold P until the bottom IR segment flashes twice. The program keys will appear again. 6. Exit programming by pressing once. The display will return to the last-selected device menu screen. 2. Press MACRO once. The Macro programming screen will appear:
3. Press COM MUTE once. The last-selected
, will device menu screen, including be displayed. 4. Enter the first macro sequence by pressing TV once, then press VOL M four times (to lower the volume four steps). continued on next page... Using Macros 19 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 20 8-IN-ONE REMOTE POWERED BY KAMELEON USING MACROS PROGRAMMING THE COM MUTE KEY (CONTD) 5. To save the macro, press and hold P until the bottom IR segment flashes twice. The program keys will appear again. 6. To program the second macro, repeat steps 4 and 5, but substitute VOL L for VOL M this time (to raise the level four steps). 7. Exit programming by pressing once. The display will return to the last-selected device menu screen. CLEARING A MACRO 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
USING KEYMOVER The RadioShack 8-in-One Remote includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode). NOTE: Do not use any of the Device Keys as a source or destination key. PROGRAMMING KEYMOVER For example, if your DVD player does not have volume control, you can map those keys (i.e., VOL L, VOL M, and MUTE) from the TV mode to DVD mode as follows:
1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press MACRO once. The Macro programming screen will appear:
2. Press OTHER once.The Other programming screen will appear:
3. Select the macro key to be cleared and press it once. The last-selected device menu screen will be displayed. 4. Press and hold P until the bottom IR segment flashes twice. The program keys will appear again. 5. Exit programming by pressing once. The display will return to the last-selected device menu screen. 20 Using Macros/Using Keymover 3. Using the number keys, enter 9 9 4. The bottom IR segment will flash twice. RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 21 4. For the source mode, press a desired device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD). For this example, press TV once. The selected source device menu screen, including
, will be displayed. 5. For the source key, press a key to be moved once. For this example press VOL L once. OWNERS MANUAL 6. For the destination mode, press a desired device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD). For this example, press DVD once. The selected destination device menu screen, including
, will be displayed. 7. For the destination key, press a key to be moved once. For this example press VOL L once. Upon keymoving, the bottom IR segment will flash twice as confirmation. The program keys will appear again. 8. Repeat steps 3 through 7 two more times to map the remaining volume control keys, substituting VOLM and MUTE as source and destination keys in steps 5 and 7. 9. Exit programming by pressing once. The display will return to the last-selected device menu screen. Upon completion of the above procedure, you can now use your RadioShack 8-in-One Remote to control the TVs volume and mute in the DVD mode, as well as in the TV mode. RESTORING A SINGLE KEYMOVED KEY 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press OTHER once.The Other programming screen will appear:
3. Using the number keys, enter 9 9 4. The bottom IR segment will flash twice. 4. Press the destination mode once where the keymoved key is stored. Then press the destination key twice. Upon key restoration, the bottom IR segment will flash twice as confirmation. The program keys will appear again. 5. If desired, repeat steps 1 and 2 to restore another key. 6. Exit programming by pressing once. The display will return to the last-selected device menu screen. RESTORING ALL KEYMOVED KEYS IN A SINGLE MODE 1. Perform steps 1 through 3 of Programming Keymover on the previous page. 2. Press the destination mode twice where the keymoved keys are stored. Upon key restoration, the bottom IR segment will flash twice as confirmation. The program keys will appear again. 3. Exit programming by pressing once. The display will return to the last-selected device menu screen. Using Keymover 21 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 22 8-IN-ONE REMOTE POWERED BY KAMELEON PROGRAMMING FAVORITE CHANNEL SCAN In the CBL, SAT, TV, VCR, or AUX mode, the RadioShack 8-in-One Remote can store a list of up to 10 favorite channels, in any order, that will be immediately scanned when you press FAV SCAN once (see the following section, Using Channel Scan). NOTE: Favorite channels can only be programmed for one mode. After programming, if FAV SCAN is pressed while in another mode, the remote control will start a normal channel scan instead (if applicable to the selected device). 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Select a Favorite Channel Mode by pressing CBL, SAT, TV, VCR, or AUX once. The bottom IR segment flashes once as the selected device key animates. 3. Press OTHER once.The Other programming screen will appear:
4. Using the number keys, enter 9 9 6. The screen will flash twice and display the Favorite Channel programming screen. NOTE: If the bottom IR segment displays one long flash, an error has occurred. Try repeating this step. 5. Using the number keys, enter a favorite channel number (e.g.,0 1 2). Then press P once. NOTE: If the original remote control required pressing an Enter key to change the channel, also press the ENTER key after the channel number
(e.g., 0 1 2 ENTER). 6. If desired, repeat step 5 for each channel to be stored, up to a total of 10 channels. NOTE: After storing 10 channels, the remote control will exit the Favorite Channel programming screen and again display the program keys. 7. To exit programming with less than twice. 10 favorite channels stored, press The display will return to the last-selected device menu screen. USING CHANNEL SCAN In the CBL, SAT, TV, VCR, or AUX mode, use FAV SCAN to start a 3-second scan of all favorite channels (if programmed see Programming Favorite Channel Scan in the previous section) and/or all channels for the selected mode. 1. If Favorite Channel Scan has been set up, skip to step 2. Otherwise, press CBL, SAT, TV, VCR, or AUX once. The bottom IR segment flashes once as the selected device key animates. 2. Press FAV SCAN once. The IR segments will display outgoing animation as each channel is changed. If Favorite Channel Scan has been set up, scanning of favorite channels will start and cycle through stored channels for 3 minutes or until any key press stops it. 22 Programming Favorite Channel Scan/Using Channel Scan RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 23 If Favorite Channel Scan has not been set up, scanning will start with the current channel, then proceed to the next channel up and cycle through all channels for 3 minutes or until stopped by pressing any key. 3. To stop scanning channels at any time, press Volume Controls Group:
any key once. OWNERS MANUAL ABOUT DEVICE MODES Moreover, the above Control Groups can be used in the following modes:
Video Playback Group:
CBL, SAT, DVD, AUD, VCR, AUX, and CD CBL, SAT, TV, DVD, AUD, VCR, AUX, and CD CBL, SAT, TV, DVD, VCR, and AUX CBL, SAT, TV, DVD, AUD, VCR, AUX, and CD Channel Controls Group:
Menu Controls Group:
FACTORY DEFAULT SETTINGS At the factory, the Control Groups are assigned the following modes as default settings:
Video Playback Group:
Volume Controls Group:
Channel Controls Group:
Menu Controls Group:
DVD AUD CBL CBL If the default settings fit your needs, you can skip programming this mode. Otherwise, perform the steps in the following section to assign device modes to the Control Groups. PROGRAMMING MY SYSTEM MODE 1. Press any device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD). The selected device key will animate. 2. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
continued on next page... Using Channel Scan/Using My System Mode 23 USING MY SYSTEM MODE The RadioShack 8-in-One Remote includes a custom Home Theater mode. After MY SYSTEM is programmed, it will allow you to access four groups of remote control keys without having to change device modes. CONTROL ORGANIZATION ABOUT CONTROL GROUPS For Home Theater programming, the remotes keys are grouped by type of control into the following four control groups:
Video Playback Group:
Volume Controls Group:
Channel Controls Group:
Menu Controls Group:
Transport controls
(REW,PLAY,FWD REC,PAUSE,and STOP) VOL L, VOLM, and MUTE CH L, CH M, INPUT, number keys (0 ~ 9), TV/VCR, FAV SCAN, ENTER, and LAST L Cursor controls
),
(L, M,
, and L OK, PAGE+, PAGE-, MENU, INFO, GUIDE, and EXIT RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 24 8-IN-ONE REMOTE POWERED BY KAMELEON USING MY SYSTEM MODE PROGRAMMING MY SYSTEM MODE (CONTD) 3. Press MY SYSTEM once.The Video Playback programming screen will appear:
5. To assign a mode to the Volume Controls group, press a device key once.Then the Channel Controls programming screen will appear:
NOTE: For steps 3 through 7, if a device key is animated, it is assigned to its respective function group. To continue programming the My System mode, you must select a device key, even if it is the same one that is currently animated. 4. To assign a mode to the Video Playback group, press a device key once (i.e., CBL, SAT, TV, DVD, AUD, VCR, AUX, or CD). Then the Volume Controls programming screen will appear:
6. To assign a mode to the Channel Controls group,press a device key once.Then the Menu Controls programming screen will appear:
7. To assign a mode to the Menu Controls group, press a device key once. Since My System programming is now complete, the program keys will appear again. 8. Exit programming by pressing once. The display will return to the last-selected device menu screen. 24 Using My System Mode RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 25 OWNERS MANUAL If desired, repeat steps 2 to 5 to reassign another device. 6. Exit programming by pressing once. The display will return to the last-selected device menu screen. USING COMMERCIAL SKIP The RadioShack 8-in-One Remote includes a unique feature for skipping past commercials on recorded programs when using a PVR (DVR) or VCR. This features works in the CBL, SAT, VCR, or AUX mode and you can use the default settings or program custom ones. USING THE DEFAULT SETTINGS The COM SKIP key is preprogrammed to perform the Commercial Skip function of your original remote control (if available). To use the default setting, simply aim the remote at the desired device, and press COM SKIP once for each skip of two commercials. PROGRAMMING COMMERCIAL SKIP To customize Commercial Skip settings, perform the following steps:
1. Turn on a desired device (e.g.,VCR or PVR) and view the commercials you want to skip. Then position the media back to the start of first commercial in the sequence. 2. Press the appropriate assigned device key once (i.e., CBL, SAT, VCR, or AUX). The selected device key will animate. continued on next page... REASSIGNING DEVICE KEYS The RadioShack 8-in-One Remote can be set to control a second device. For example, to control a TV, a Cable Box, and two DVD Players, you can reassign the unused AUX key to operate the second DVD Player as follows:
1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press MODE L once. The Mode Mover programming screen will appear:
3. For the source mode, press a device key once (i.e.,CBL,SAT,TV,DVD,AUD,VCR,AUX, or CD). For this example, press DVD once. The selected device menu screen,including will be displayed.
, NOTE: Only one device can be assigned to an unused device key at a time. 4. For the destination mode, press a device key once (i.e.,CBL,SAT,TV,DVD,AUD,VCR,AUX, or CD). For this example, press AUX once. Upon reassignment, the bottom IR segment will flash twice as confirmation. The program keys will appear again. 5. For this example, the AUX key is now ready to be set up to control your second DVD player. See Programming A Device on page 10. Reassigning Device Keys/Using Commercial Skip 25 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 26 8-IN-ONE REMOTE POWERED BY KAMELEON USING COMMERCIAL SKIP PROGRAMMING COMMERCIAL SKIP (CONTD) 3. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
4. Press OTHER once.The Other programming screen will appear:
5. Using the number keys, enter 9 7 4. The screen will flash twice and display the Commercial Skip programming screen. 6. Select a Commercial Skip mode by pressing CBL, SAT, VCR, or AUX once. 7. Press FFWD once and watch for the end of a commercial sequence that typically may have four to six commercials and last 2 to 3 minutes in real time.As it ends,press PLAY once. NOTE: If the time between FFWD and PLAY key presses exceeds 30 seconds, the program will ignore your action. The bottom IR segment will display a long flash to denote the time limit has been exceeded and the screen will return to the Program Keys menu.You will need to start again at step 4 and perform this step within 30 seconds. NOTE: Although FFWD and PLAY keys are used in programming this step, other keys may be used depending on how they functioned on the original remote control. 8. To save the settings, press and hold P until the bottom IR segment flashes twice. The program keys will appear again. 9. Exit programming by pressing once. The display will return to the last-selected device menu screen. SETTING THE TILT SWITCH The RadioShack 8-in-One Remote contains a Tilt Switch that activates the display when the unit is moved. If desired, you can disable it so only pressing a key will turn on the display. NOTE: Disabling the Tilt Switch can help conserve battery life. DISABLING THE TILT SWITCH 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear
(as shown on the next page):
26 Using Commercial Skip/Setting The Tilt Switch OWNERS MANUAL SETTING THE FINDER RECEIVER The RadioShack 8-in-One Remote comes with a Finder Transmitter that can be used to quickly locate the main remote if it is accidentally lost or misplaced. At the factory, the Finder Receiver (inside the remote) is set to wake up every few seconds, listen for a signal from the Finder Transmitter, and then emit an audible alert to pinpoint the location of the main remote. This is a great feature, but it does use extra battery power. If you do not plan to use the Finder Transmitter, we recommend turning off the remotes Finder Receiver to conserve battery life. DISABLING THE FINDER RECEIVER 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press OTHER once.The Other programming screen will appear:
RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 27 2. Press OTHER once.The Other programming screen will appear:
3. Using the number keys, enter 9 8 5. The screen will flash four times, confirming the Tilt Switch is disabled. The program keys will appear again. 4. Exit programming by pressing once. The display will return to the last-selected device menu screen. ENABLING THE TILT SWITCH 1. Perform steps 1 and 2 of the previous section, Disabling The Tilt Switch. 2. Using the number keys, enter 9 8 5. The screen will flash twice, confirming the Tilt Switch is enabled. The program keys will appear again. 3. Exit programming by pressing once. The display will return to the last-selected device menu screen. continued next page... Setting The Tilt Switch/Setting The Finder Receiver 27 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 28 8-IN-ONE REMOTE POWERED BY KAMELEON 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press OTHER once.The Other programming screen will appear:
3. Using the number keys, enter 9 7 7. The bottom IR segment will flash twice, pause and flash twice again to confirm restoration. 4. Exit programming by pressing once. The display will return to the last-selected device menu screen. SETTING THE FINDER RECEIVER DISABLING THE FINDER RECEIVER (CONTD) 3. Using the number keys, enter 9 7 2. The screen will flash four times, confirming the Finder Receiver is disabled. The program keys will appear again. 4. Exit programming by pressing once. The display will return to the last-selected device menu screen. ENABLING THE FINDER RECEIVER 1. Perform steps 1 and 2 of the previous section, Disabling The Finder Receiver (starting on the previous page). 2. Using the number keys, enter 9 7 2. The screen will flash twice, confirming the Finder Receiver is enabled. The program keys will appear again. 3. Exit programming by pressing once. The display will return to the last-selected device menu screen. RESTORING FACTORY DEFAULT SETTINGS The RadioShack 8-in-One Remote includes an Setup Code Reset program.You can use it to restore all your programmed codes to factory settings and delete all custom programming. IMPORTANT: Executing this program will erase all code settings (except upgraded codes) and all custom settings for My System, Macros, Learned Keys, Reassigned Device Keys, Keymoved Keys, Favorite Channels, and all device settings. 28 Setting The Finder Receiver/Restoring Factory Default Settings RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 29 CLEARING ALL CUSTOM PROGRAMMING The RadioShack 8-in-One Remote contains a Custom Programming Reset program.You can use it to remove all custom programming, except your setup codes and reassigned device keys. IMPORTANT: Executing this program will erase all custom settings for My System, Macros, Learned Keys, Keymoved Keys, and Favorite Channels. 1. Press and hold P until the bottom IR segment flashes twice. The program keys will appear:
2. Press OTHER once.The Other programming screen will appear:
OWNERS MANUAL SPECIFICATIONS Remote Power . (4) AAA Batteries Finder Transmitter Power . (1) 9 V Battery Finder Transmitter to Remote Range . 40 ft (12.2 m) Remote Dimensions
(H x W x D). 9.44 x 2.64 x 1.02 in.
(H x W x D) . 240 x 67.2 x 26 mm Finder Transmitter Dimensions
(H x W x D) . ? x ? x ? in.
(H x W x D) . ? x ? x ? mm Remote Weight
(no batteries). 0.4 lb (181.4 g) Finder Transmitter Weight
(no battery). ? lb (? g) NOTE: Specifications are typical. Individual units might vary. Specifications are subject to change and improvement without notice. 3. Using the number keys, enter 9 8 0. The bottom IR segment will flash twice, pause, and flash twice again to confirm restoration. 4. Exit programming by pressing once. The display will return to the last-selected device menu screen. Clearing All Custom Programming/Specifications 29 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 30 8-IN-ONE REMOTE POWERED BY KAMELEON ABOUT UPGRADING Your RadioShack 8-in-One Remote has the largest infrared code library available and contains a unique feature that allows new codes to be added to its memory over the phone. In a matter of seconds, your remote will quickly and reliably record the new information without complex plugs, adapters, or attachments. This means that as you buy new entertainment devices in the future, the RadioShack 8-in-One Remote will never become obsolete. Simply call our consumer help-line, and one of our cus-
tomer service representatives will assist you through the entire process of upgrading your RadioShack 8-in-One Remote. Consumer Help-Line: (800) 950-7044 NOTE: RadioShack reserves the right to replace a returned remote-control with a new one of equal or superior functionality. UPGRADE PROCEDURE 1. Call our Consumer Help-Line at:
(800) 950-7044 on any business day, between 9:00 AM and 5:30 PM, EST. 2. Our customer service agent will ask for and record the brand name(s) and model number(s) of your device(s). Then the agent will lead you through the upgrade procedure by asking you to place your telephones speaker next to the PWR key on the RadioShack 8-in-One Remote (see below). NOTE: Only use a land-line phone for the upgrade procedure. Do not use a mobile phone, because it will not transmit the signals correctly. 30 About Upgrading/Troubleshooting In a matter of seconds, new setup codes for your device(s) will be transmitted through the telephone and stored in your RadioShack 8-in-One Remote. 3. After your RadioShack 8-in-One Remote has been successfully upgraded by telephone, stay on the line. Our customer service agent will ensure that your unit is working properly with your device(s) and answer any other questions you may have. UPGRADE EXCLUSIONS Home entertainment or home automation devices controlled by radio frequency
(RF/UHF), wired, or ultrasonic remote controls. Only devices controlled by infrared remote controls are covered. Home entertainment or home automation devices not controlled by remote controls. Broken or defective product. Products that operate over 100 kHz. Infrared keyboards a nd infrared pointing devices (such as mouse substitutes). All products for sale and/or use outside the continental United States, Hawaii, Alaska, or Canada. TROUBLESHOOTING PROBLEM:
No display at all times. SOLUTION:
Replace batteries with four new AAA alkaline batteries. PROBLEM:
No display when programming. SOLUTION:
Display has turned off due to inactivity. Start programming again and do not pause while performing instructions. RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 31 PROBLEM:
Remote Finder does not work. PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
Replace battery with new 9 V alkaline battery; also verify Finder Receiver is enabled (see page 28). During programming, the bottom IR segment displays a long flash. An invalid entry has occurred. Check the keys to be pressed and start program again. PROBLEM:
How do I stop programming?
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
once to return to the Press program keys screen.Press it once more to exit completely. The unit does not control home entertainment devices or com-
mands are not working properly. Try all listed codes for the device brands being set up. Make sure they can be operated with an infrared remote control. Tried Searching For Your Code method and still could not find a working code. Perform Restoring Factory Default Settings on page 28. Then repeat Searching For Your Code on page 12. Cannot program a macro onto M1~ M4,PWR,or COM MUTE keys. SOLUTION : Make sure the total number of PROBLEM :
SOLUTION :
key presses being programmed is less than 15. Power macro does not work. First press MY SYSTEM once, then press PWR once. SOLUTION:
PROBLEM:
SOLUTION:
OWNERS MANUAL Favorite channel function does not work properly. Some devices (e.g.,Cable Boxes or Satellite Receivers) use two-
digit channel numbers.During programming,press ENTER or OK once after entering a channel number (e.g.,0 2 ENTER for channel 2).See Programming Favorite Channel Scan on page 22. Changing channels does not work properly. If the original remote control required pressing ENTER to change channels, then press ENTER on the remote control after entering channel numbers. PROBLEM:
No remote control of volume. SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
See Changing Volume Lock on page 16 to lock/unlock volume. Bottom IR segment flashes when pressing a key,but home enter-
tainment device does not respond. Make sure the remote is aimed at your home entertainment device and is not farther away than 15'. CH L and CH M do not work for your RCA TV. Due to RCA design (1983-1987), only the original remote control will operate these functions. Pressing SCREEN one or more times in CBL, SAT, DVD, VCR, AUX, or MY SYSTEM mode does not display a secondary menu screen. Although SCREEN is displayed, for these modes, there are no additional menu screens. Troubleshooting 31 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 32 8-IN-ONE REMOTE POWERED BY KAMELEON DEVICE MENU SCREENS PROGRAMMING MAIN MENU AUD MAIN MENU Pressing and holding P displays the Programming Main Menu screen.Use the program keys to program device control (DEV SET),code search
(SEARCH),home theater mode (MY SYSTEM), volume lock (VOL
),macros (MACRO),display brightness (
IR DELETE),device key reassignment ( MODE or other functions (OTHER).See the Table of Contents on page 2 to locate a section of interest.
),function learning (IR LEARN and
), L Pressing AUD once displays the AUDIO Main Menu screen.After device programming, use these keys to remotely control your Audio Receivers or Amplifiers volume and stations, select source inputs, operate transport functions on a built-in CD player (or DVD player, if HTiB device), and access menu or preset functions. Pressing SCREEN once will display a secondary AUDIO menu (as shown on the next page). 32 Device Menu Screens RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 33 OWNERS MANUAL AUD MENU AUX MAIN MENU Pressing SCREEN once (on the AUDIO Main Menu, as shown on the previous page,right side) displays a secondary AUDIO Menu screen.Use these keys to remotely control your Audio Receivers or Amplifiers volume,stations,and surround functions. Pressing SCREEN once more returns the display to the AUDIO Main Menu screen. Pressing AUX once displays the AUX Main Menu screen.After device programming, use these keys to remotely control all your devices common features, such as volume and channels, and menu, guide, and navigation functions. Device Menu Screens 33 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 34 8-IN-ONE REMOTE POWERED BY KAMELEON DEVICE MENU SCREENS (contd) CBL MAIN MENU CD MAIN MENU Pressing CBL once displays the CBL Main Menu screen.After Cable Box programming, use these keys to remotely control all your devices common features,such as volume and channels,and menu, guide,and navigation functions. Pressing CD once displays the CD Main Menu screen.After device programming,use these keys to remotely control your CD players common features,such as transport keys and skip,menu,and random functions. Pressing SCREEN once will display a secondary CD menu (as shown on the next page). 34 Device Menu Screens RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 35 OWNERS MANUAL CD MENU DVD MAIN MENU Pressing SCREEN once (on the CD Main Menu,as shown on the previous page,right side) displays a secondary CD Menu screen.Use these keys to remotely control your CD playernavigation functions. Pressing SCREEN once more returns the display to the CD Main Menu screen. Pressing DVD once displays the DVD Main Menu screen.After device programming, use these keys to remotely control all your DVD players common features, such as transport keys and menu, navigation, subtitle, and audio functions. Device Menu Screens 35 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 36 8-IN-ONE REMOTE POWERED BY KAMELEON DEVICE MENU SCREENS (contd) MY SYSTEM MAIN MENU TV MAIN MENU After mode programming,pressing MY SYSTEM once displays the My System Main Menu screen. Use these keys to remotely access all common features and functions of your home theater system.For details,see Using My System Mode on page 23. Pressing TV once displays the TV Main Menu screen.After device programming,use these keys to remotely control all your TVs common features,such as volume and channels,and last channel,menu,and information/display functions. Pressing SCREEN once will display a secondary TV menu (as shown on the next page). 36 Device Menu Screens RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 37 OWNERS MANUAL TV MENU VCR MAIN MENU Pressing SCREEN once (on the TV Main Menu,as shown on previous page,right side) displays a secondary TV Menu screen.Use these keys to remotely control all your TVs common menu features. Pressing SCREEN once more returns the display to the TV Main Menu screen. Pressing VCR once displays the VCR Main Menu screen.After device programming,use these keys to remotely control all your TVs common features, such as volume and channels, and last channel, menu, and information/display functions, and VCR transport controls. Device Menu Screens 37 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 38 8-IN-ONE REMOTE POWERED BY KAMELEON INSTRUCTION TO THE USER This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference in a residential installation.This equipment generates, uses and can radiate radio frequency ener-
gy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaran-
tee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment has been verified to comply with the limits for a class B computing device, pur-
suant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's authority to operate this equipment. CARE Keep the remote dry. If the remote gets wet, wipe it dry immediately. Handle the remote gently and carefully. Dont drop it. Use and store the remote only in normal temper-
ature environments. Keep the remote away from dust and dirt. Wipe the remote with a damp cloth to keep it looking new. Modifying or tampering with internal parts can cause damage and invalidate the warranty. If your remote is not performing as it should, please contact us at:
www.radioshack.com or visit your local RadioShack store for help. ADDITIONAL INFORMATION 2003 Universal Electronics. No part of this publi-
cation may be reproduced, transmitted, transcribed, stored in any retrieval system,or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics Inc. Kameleon is a trademark (registra-
tion pending) of Universal Electronics. 2002 RadioShack Corporation. All Rights Reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. The RadioShack 8-in-One Remote Powered By Kameleon is compatible for use in North America. This product uses technologies licensed under one or more of the following U.S. patents: 6,496,135;
6,330,091; 6,195,033; 6,097,309; 6,014,092; 5,959,751;
5,953,144; 5,686,891; 5,638,050; 5,532,463; 5,515,052;
5,481,256; 5,414,761; 5,255,313; 5,228,077; 4,959,810;
and patents pending. M6123 38 Care/Additional Information/Instruction To The User RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 39 LIMITED 90-DAY WARRANTY This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTIC-
ULAR PURPOSE,ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-
MANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO,ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDI-
RECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design;
or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and products are warranted for the remainder of the original warranty period.You will be charged for repair or replacement of the product made after the expiration of the warranty period. OWNERS MANUAL This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, acci-
dent, misuse, improper or abnormal usage, failure to follow instructions, improper installation or mainte-
nance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries;
(d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102 Cat. No. 15-2138 07/02 Fort Worth, Texas 76102 Limited 90-Day Warranty 39 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 40 8-IN-ONE TELECONTROL ACCIONADO POR KAMELEON
<< pages 40 through 79 reserved for Spanish version of manual>>
40 ndice De Materias/Introduccin RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 41 MANUAL DE DEUO
<< pages 40 through 79 reserved for Spanish version of manual>>
Introduccin 41 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 80 8-IN-ONE REMOTE POWERED BY KAMELEON MANUFACTURERS CODES
(CDIGOS DEL FABRICANTE) SETUP CODES FOR AUDIO AMPLIFIERS
(CDIGOS DE CONFIGURACIN PARA AMPLIFICADORES DE AUDIO) GE 0078 Harman/Kardon 0892 JVC 0331 0892 Left Coast 0892 Marantz 0395 Optimus Philips 0892 0892 Polk Audio 0395 Realistic 0078 Soundesign Victor 0331 0078 Wards Yamaha 0354 SETUP CODES FOR AUDIO RECEIVERS
(CDIGOS DE CONFIGURACIN PARA RECEPTORES DE AUDIO) 0531 ADC 1405, 0158, 0189, 0121, 1089, 1388 Aiwa 1390 Alco Anam 1609, 1074 1257 Apex Digital 1189 Audiotronic 1390 Audiovox Bose 1229, 1253 0531 Capetronic 1189, 0189, 1089 Carver 1352 Classic Denon 1360 1263 Glory Horse 0110, 0189 Harman/Kardon 0135, 1298 Integra JBL 0110, 1306 0074, 1263, 1374, 1495 JVC 1390 KLH 1313, 1569, 0186, 1027 Kenwood Koss 1366 Lasonic Linn MCS Magnavox Marantz Musicmagic Nikko Norcent Onkyo Optimus Oritron Panasonic Philips Pioneer Polk Audio Proscan Quasar RCA RadioShack Samsung Sansui Sharp Sharper Image Sony Soundesign Stereophonics Sunfire Teac Technics Techwood Thorens Venturer Victor Wards Yamaha 1798 0189 0039 1189, 1269, 0189, 0531, 1089 1189, 0039, 0189, 1089 1089 0609 1389 0135, 0842, 1298 1023, 0186, 0531, 0670, 1074 1366, 1380 1518, 0039 1189, 1269, 0189, 1089, 1266 1023, 0014, 0150, 0531, 0630, 1384 0189 1254 0039 1023, 1609, 1254, 0531, 1074, 1390 1263 1295 0189, 1089 0186 1385 1058, 1441, 1258, 0158, 1158, 1558, 1658, 1758 0670 1023 1313 1074 1308, 1518, 0039, 1309 0609 1189 1390 0074 0158, 0189, 0014 0176, 0186, 1176, 1375 SETUP CODES FOR CABLE BOXES
(CDIGOS DE CONFIGURACIN PARA CONVERTIDORES DE CABLE) ABC Americast Bell & Howell Bell South 0003, 0008, 0014 0899 0014 0899 80 Manufacturers Codes (Cdigos Del Fabricante) RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 81 OWNERS MANUAL (MANUAL DE DEUO) JVC KLH Kenwood Krell Linn MCS MTC Magnavox Marantz Miro Mission NSM Onkyo Optimus Panasonic Parasound Philips Pioneer Polk Audio Proton QED Quasar RCA RadioShack Realistic Rotel SAE Sansui Sharp Sonic Frontiers Sony TAG McLaren TDK Tascam Teac Technics Victor Wards Yamaha 0072 1318 0681, 0626, 0028 0157 0157 0029 0420 0157 0626, 0029, 0157 0000 0157 0157 0868 1063, 0000, 0032, 0420, 1075 0029 0420 0626, 0157 1063, 1062, 0032 0157 0157 0157 0029 1062, 0032 1075 0420 0157, 0420 0157 0157 0861 0157 0490, 0000, 0100 0157 1208 0420 0420 0029 0072 0157 0888, 0036, 1292 SETUP CODES FOR CABLE BOXES, CONTINUED
(CDIGOS DE CONFIGURACIN PARA CONVERTIDORES DE CABLE, CONTINUACIN) Director General Instrument GoldStar Hamlin Jerrold Memorex Motorola Pace Panasonic Paragon Philips Pioneer Pulsar Quasar Regal Runco Samsung Scientific Atlanta Sony Starcom Supercable Torx Toshiba Zenith 0476 0476, 0810, 0276, 0003 0144 0009, 0273 0476, 0810, 0276, 0003, 0014 0000 0476, 0810, 0276 0237 0000, 0107 0000 0305, 0317 0877, 1877, 0144, 0533 0000 0000 0279, 0273 0000 0144 0877, 1877, 0477, 0008 1006 0003 0276 0003 0000 0000, 0525, 0899 SETUP CODES FOR CD PLAYERS
(CDIGOS DE CONFIGURACIN PARA REPRODUCTORES DE CDS) 0157 Aiwa 0420 Burmester 0029 California Audio Labs 0157 Carver Classic 1297 0000 DKK 0157 DMX Electronics 0873 Denon Garrard 0420 0032 Genexxa 0157 Harman/Kardon Hitachi 0032 Manufacturers Codes (Cdigos Del Fabricante) 81 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 82 8-IN-ONE REMOTE POWERED BY KAMELEON MANUFACTURERS CODES, Continued
(CDIGOS DEL FABRICANTE, Continuacin) SETUP CODES FOR DVD PLAYERS
(CDIGOS DE CONFIGURACIN PARA REPRODUCTORES DVD) 0641 Aiwa 0672, 0717, 0755, 0794, 0796, 0797, 0830, Apex Digital 1100 0717 0571 0695 0876 0816, 1019, 1023, 1024 0521 0784 0490, 0634 0591 0591 0670 0522, 0815, 0717 0715, 0783 0651 0717 0582, 0702 0573, 0664 0672 0783 0627 0702 0558, 0623, 0867 0717 0490, 0534, 0682 0651 0503, 0675 0539 0522 0717 0521 0717 0872 0503, 0627 Blaupunkt Blue Parade Broksonic Cinevision CyberHome DVD2000 Daewoo Denon Emerson Enterprise Fisher GE Go Video Gradiente Greenhill Harman/Kardon Hitachi Hiteker IRT Integra JBL JVC KLH Kenwood Koss Magnavox Marantz Microsoft Mintek Mitsubishi Nesa Norcent Onkyo Oritron Panasonic Philips Pioneer Polk Audio Proscan Qwestar RCA Rotel Sampo Samsung Sansui Sanyo Sharp Sherwood Shinsonic Sony Sylvania Technics Theta Digital Toshiba Tredex Urban Concepts XBox Yamaha Zenith 0651 0490, 0632, 1362, 1490 0503, 0539, 0646, 0854 0525, 0571, 0632 0539 0522 0651 0522, 0571, 0717, 0822, 1022 0623 0698 0573, 0820 0695 0670, 0695 0630 0633 0533 0533, 0864 0675, 0821 0490 0571 0503, 0695, 1045 0799 0503 0522 0490, 0539, 0545 0503, 0591 SETUP CODES FOR DVD PLAYER/VCR COMBOS
(CDIGOS DE CONFIGURACIN PARA APARATOS COMBINADOS REPRODUCTORES DVD/VIDEOGRABADORA) 0715 Go Video 0664 (for VCR use 0000) Hitachi 0867 JVC 0822 (for VCR use 0060) RCA Samsung 0820 0695 Sansui 0630 (for VCR use 0848) Sharp 0864 Sony Sylvania 0675 (for VCR use 0000) 0503 Toshiba 82 Manufacturers Codes (Cdigos Del Fabricante) RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 83 SETUP CODES FOR HOME-THEATER-IN-A-BOX DEVICES
(CDIGOS DE CONFIGURACIN PARA DISPOSITIVOS HOME-THEATER-IN-A-BOX) Aiwa Anam Apex Digital Audiovox Classic JBL JVC KLH Koss Lasonic Norcent Onkyo Oritron Philips Pioneer RCA Samsung Sony Venturer Yamaha 1388 1609 1257 1390 1352 1306 1374, 1495 1390 1366 1798 1389 1298 1366 1266, 1269 1384 1390, 1609 1295 1558, 1658, 1758 1390 1375 SETUP CODES FOR PVRS
(CDIGOS DE CONFIGURACIN PARA PVRS) Panasonic Philips RCA ReplayTV Sonic Blue Sony Tivo 0616 0618 0880 0614, 0616 0616, 0614 0636 0618, 0636 SETUP CODES FOR SATELLITE RECEIVERS
(CDIGOS DE CONFIGURACIN PARA RECEPTORES DE SATLITE) AlphaStar Chaparral Crossdigital 0772 0216 1109 OWNERS MANUAL (MANUAL DE DEUO) DirecTV Dish Network System DishPro Echostar Expressvu GE GOI General Instrument HTS Hitachi Hughes Network Systems JVC Magnavox Memorex Mitsubishi Motorola Next Level Panasonic Paysat Philips Proscan RCA RadioShack SKY Samsung Sony Star Choice Toshiba UltimateTV Uniden Zenith 0392, 0566, 0639, 1142, 0247, 0749, 1749, 0724, 0819, 1856, 1076, 1109 1005, 0775 1005, 0775 1005, 0775 0775 0566 0775 0869 0775 0819 1142, 0749, 1749 0775 0724, 0722 0724 0749 0869 0869 0247, 0701 0724 1142, 0749, 1749, 0724, 1076, 0722 0392, 0566 0392, 0566, 0855, 0143 0869 0856 1276, 1109 0639 0869 0749, 1749, 0790 0392, 0639 0724, 0722 0856, 1856 SETUP CODES FOR TVS
(CDIGOS DE CONFIGURACIN PARA TELEVISORES) AOC Admiral Advent Aiko Aiwa Akai 0030 0093, 0463 0761 0092 0701 0702, 0030 continued on next page...
(contina en la siguiente pgina...) Manufacturers Codes (Cdigos Del Fabricante) 83 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 84 8-IN-ONE REMOTE POWERED BY KAMELEON MANUFACTURERS CODES
(CDIGOS DEL FABRICANTE) SETUP CODES FOR TVS, CONTINUED
(CDIGOS DE CONFIGURACIN PARA TELEVISORES, CONTINUACIN) Alaron America Action Ampro Anam Apex Digital Audiovox Baysonic Bell & Howell Bradford Broksonic CXC Candle Carnivale Carver Celebrity Celera Changhong Cineral Citizen Clarion Concerto Contec Craig Crosley Crown Curtis Mathes 0179 0180 0751 0180 0748, 0765 0451, 0180, 0092, 0623 0180 0154, 0016 0180 0236, 0463 0180 0030, 0056 0030 0054 0000 0765 0765 0451, 0092 0060, 0030, 0056, 0092 0180 0056 0180 0180 0054 0180 0047, 0054, 0154, 0451, 0093, 0060, 0702, 0030, 0145, 0166, 0016, 0056, 0466, 0747, 1147, 1347 0451, 0092, 0623 0145 0017 0720, 0774 0000 0154, 0236, 0463, 0180, 0178, 0179, 0623 0030 0154 0179, 0683, 0809 0180, 0171, 0179 0180 Daewoo Denon Dumont Dwin Electroband Emerson Envision Fisher Fujitsu Funai Futuretech GE Gibralter GoldStar Gradiente Grunpy Hallmark Harley Davidson Harman/Kardon Harvard Havermy Hello Kitty Hitachi Infinity Inteq JBL JCB JVC Jensen KEC KTV Kenwood Konka LG LXI Logik Luxman MGA MTC Magnavox Majestic Marantz Matsushita Megatron Memorex Midland Minutz Mitsubishi Motorola Multitech NAD NEC NTC Nikko Norcent 0047, 0051, 0451, 0178, 0021, 0747, 1147, 1347 0017, 0030 0030, 0178 0053, 0056 0180, 0179 0178 0179 0054 0180 0093 0451 1145, 0145, 0016, 0056 0054 0017 0054 0000 0463, 0053 0761 0180 0180, 0030 0030 0707 0056 0047, 0054, 0154, 0156, 0178, 0747 0016 0056 0150, 0030, 0178 0060, 0030, 0056 0054, 0030, 1454, 0179, 1254 0016 0054, 0030 0250 0178, 0145 0154, 0250, 0463, 0150, 0178, 0016, 0179 0047, 0017, 0051, 0747 0021 0093, 0150, 0178 0093 0180 0156, 0178, 0866 0030, 0056 0092 0030, 0178, 0092 0748 84 Manufacturers Codes (Cdigos Del Fabricante) RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 85 OWNERS MANUAL (MANUAL DE DEUO) Starlite Supreme Sylvania Symphonic TMK TNCi TVS Tandy Technics Technol Ace Techwood Teknika Telefunken Toshiba Vector Research Victor Vidikron Vidtech Wards Waycon White Westinghouse Yamaha Zenith 0180 0000 0054, 0030, 0171 0180, 0171 0178, 0056 0017 0463 0093 0250, 0051 0179 0051, 0056 0054, 0180, 0150, 0060, 0016, 0056, 0092, 0179 0702, 0056 0154, 0156, 0060, 1256, 1356 0030 0053 0054 0178 0054, 0030, 0178, 0016, 0021, 0056, 0179, 0866 0156 0463, 0623 0030 0017, 0463, 0178, 0016, 0092 SETUP CODES FOR TV/DVD PLAYER COMBOS
(CDIGOS DE CONFIGURACIN PARA APARATOS COMBINADOS TELEVISOR/REPRODUCTORES DVD) Apex Digital Broksonic Panasonic Philips RCA Sharp Sylvania Toshiba 0830 0695 1362, 1490 0854 1022 0630 0821, 0675 (for TV use 0171) 0695, 1045 SETUP CODES FOR TVS, CONTINUED
(CDIGOS DE CONFIGURACIN PARA TELEVISORES, CONTINUACIN) Onwa Optimus Optonica Orion Panasonic Penney 0180 0154, 0250, 0166 0093 0236, 0463, 0179 0250, 0051 0047, 0156, 0051, 0060, 0030, 0178, 0021, 0747, 1347 0054, 0463, 0030, 0145 0054, 1454, 0690 0030 0166, 0679, 0866 0092 0761 0717 0051 0047, 0747 0178, 0466 0017 0250, 0051 0047, 1447, 0090, 0679, 0747, 1047, 1147, 1247, 1347, 1547 0047, 0154, 0180, 0030, 0178, 0056, 0747 0154, 0180, 0030, 0178, 0056 0017, 0030, 0603 0180 0030 0060, 0702, 0030, 0178, 0056 0451 0463 0154, 0799 0178 0236, 0180, 0178, 0179 0047, 0054, 0154, 0156, 0178, 0171, 0056, 0179, 0747 0180 0156 0093, 0688, 0689 0093 0016 1100, 0000 0180, 0178, 0179 0171 Philco Philips Pilot Pioneer Portland Prima Princeton Prism Proscan Proton Pulsar Quasar RCA RadioShack Realistic Runco SSS Sampo Samsung Sansei Sansui Sanyo Scotch Scott Sears Semivox Semp Sharp Sheng Chia Signature Sony Soundesign Squareview Manufacturers Codes (Cdigos Del Fabricante) 85 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 86 8-IN-ONE REMOTE POWERED BY KAMELEON MANUFACTURERS CODES, Continued
(CDIGOS DEL FABRICANTE, Continuacin) SETUP CODES FOR TV/VCR COMBOS
(CDIGOS DE CONFIGURACIN PARA APARATOS COMBINADOS TELEVISOR/VIDEOGRABADORA) Broksonic Citizen Curtis Mathes Daewoo Emerson Funai GE Goldstar Harley Davidson Hitachi Lloyds Magnasonic Magnavox Magnin Memorex MGA Optimus Orion Panasonic Penney Quasar RadioShack RCA Sansui Sanyo Sears Sony Sylvania Symphonic Thomas Toshiba White Westinghouse Zenith 0002, 0479, 1479 1278 1035 1278 0002, 0479, 1278, 1479 0000 1060, 0240, 1035, 0760 1237 0000 0000 0000 1278 0000, 1781 0240 0162, 1162, 1237, 0037 0240 0162, 1162 0002, 0479, 1479 0162, 1035, 1162 0240, 1035, 1237 0162, 1035, 1162 0000, 0037 1060, 0240, 1035, 0760 0000, 0479, 1479 0240 0000, 1237 0000, 1232 1781 0000 0000 0845 1278 0000, 0479, 1479 SETUP CODES FOR VCRS
(CDIGOS DE CONFIGURACIN PARA VIDEOGRABADORAS) Admiral Adventura Aiko Aiwa America Action American High Asha Audiovox Beaumark Bell & Howell Broksonic CCE Calix Canon Carver Cineral Citizen Craig Curtis Mathes Cybernex Daewoo Denon Dynatech Electrohome Electrophonic Emerex Emerson 0048, 0209 0000 0278 0037, 0000 0278 0035 0240 0037, 0278 0240 0104 0184, 0121, 0209, 0002, 0479, 1479 0278 0037 0035 0081 0278 0037, 0278, 1278 0037, 0047, 0240 0060, 0035, 0162, 0760, 1035 0240 0045, 0278, 1278 0042 0000 0037 0037 0032 0037, 0184, 0000, 0121, 0043, 0209, 0002, 0278, 0479, 1278, 1479 0047, 0104 0035, 0033 0000 0060, 0035, 0240, 0760, 1035, 1060 0000 0432 0037, 1237 0000 0047 0000 0081 0000, 0042 0042 Fisher Fuji Funai GE Garrard Go Video GoldStar Gradiente HI-Q Harley Davidson Harman/Kardon Hitachi Hughes Network Systems 86 Manufacturers Codes (Cdigos Del Fabricante) RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 87 OWNERS MANUAL (MANUAL DE DEUO) Radix Randex Realistic ReplayTV Runco STS Samsung Sanky Sansui Sanyo Scott Sears Semp Sharp Shogun Sonic Blue Sony Sylvania Symphonic TMK Teac Technics Teknika Thomas Tivo Toshiba Totevision Unitech Vector Video Concepts Videomagic Videosonic Villain Wards White Westinghouse XR-1000 Zenith 0037 0037 0035, 0037, 0048, 0047, 0000, 0104 0614, 0616 0039 0042 0240, 0045 0048, 0039 0000, 0067, 0209, 0479, 1479 0047, 0240, 0104 0184, 0045, 0121, 0043 0035, 0037, 0047, 0000, 0042, 0104, 1237 0045 0048, 0848 0240 0614, 0616 0035, 0032, 0033, 0000, 0636, 1232 0035, 0081, 0000, 0043, 1781 0000 0240 0000 0035, 0162 0035, 0037, 0000 0000 0618, 0636 0045, 0043, 0845 0037, 0240 0240 0045 0045 0037 0240 0000 0060, 0035, 0048, 0047, 0081, 0240, 0000, 0042, 0760 0209 0035, 0000 0039, 0033, 0000, 0209, 0479, 1479 SETUP CODES FOR VCRS, CONTINUED
(CDIGOS DE CONFIGURACIN PARA VIDEOGRABADORAS, CONTINUACIN) JVC KEC Kenwood Kodak LXI Lloyds MEI MGA MGN Technology MTC Magnasonic Magnavox Magnin Marantz Marta Matsushita Memorex 0067 0037, 0278 0067 0035, 0037 0037 0000 0035 0240, 0043 0240 0240, 0000 1278 0035, 0039, 0081, 0000, 1781 0240 0035, 0081 0037 0035, 0162, 1162 0035, 0162, 0037, 0048, 0039, 0047, 0240, 0000, 0104, 0209, 0479, 1162, 1237 0042 0067, 0043 0035, 0048 0000 0104, 0067 0037 0240 0035 0162, 0037, 0048, 0104, 0432, 1162 0184, 0209, 0002, 0479, 1479 0035, 0162, 0225, 0616, 1035, 1162 0035, 0037, 0240, 0042, 1035, 1237 0042 0035, 0209, 0479 0035, 0081, 0618, 1081, 1181 0037 0067 0081 0240 0060, 0760, 1060 0039 0035, 0162, 1035, 1162 0060, 0240, 0042, 0760, 0880, 1035, 1060 0000 Minolta Mitsubishi Motorola Multitech NEC Nikko Noblex Olympus Optimus Orion Panasonic Penney Pentax Philco Philips Pilot Pioneer Polk Audio Profitronic Proscan Pulsar Quasar RCA RadioShack Manufacturers Codes (Cdigos Del Fabricante) 87 RS Kameleon 8in1 UG 7/9/03 1:03 PM Page 88 8-IN-ONE REMOTE POWERED BY KAMELEON MANUFACTURERS CODES, Continued
(CDIGOS DEL FABRICANTE, Continuacin) SETUP CODES FOR VIDEO ACCESSORIES
(CDIGOS DE CONFIGURACIN PARA ACCESORIOS DE VDEO) Panasonic Pioneer Princeton Samsung Sensory Science Sharp 1120 1010 0113, 0295 1190 1126 1010 88 Manufacturers Codes (Cdigos Del Fabricante)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2003-08-04 | 349.3 ~ 349.3 | DSC - Part 15 Security/Remote Control Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2003-08-04
|
||||
1 | Applicant's complete, legal business name |
RadioShack Corporation
|
||||
1 | FCC Registration Number (FRN) |
0027478072
|
||||
1 | Physical Address |
300 RadioShack Circle, Mail Stop WF4-136
|
||||
1 |
Fort Worth, TX
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
s******@celectronics.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AAO
|
||||
1 | Equipment Product Code |
1502138
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
E******** G****
|
||||
1 | Title |
Regulatory Affairs Manager
|
||||
1 | Telephone Number |
817-4********
|
||||
1 | Fax Number |
817-4********
|
||||
1 |
e******@radioshack.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Compatible Electronics
|
||||
1 | Name |
M****** P****** C********
|
||||
1 | Physical Address |
114 Olinda Drive
|
||||
1 |
Brea, California 92823
|
|||||
1 |
United States
|
|||||
1 | Telephone Number |
714-5********
|
||||
1 | Fax Number |
714-5********
|
||||
1 |
m******@celectronics.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSC - Part 15 Security/Remote Control Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RadioShack Remote Control Finder | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Compatible Electronics
|
||||
1 | Name |
S****** M****
|
||||
1 | Telephone Number |
714-5********
|
||||
1 | Fax Number |
714-5********
|
||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | 349.30000000 | 349.30000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC