iL RadioShack. CORPORATIGN Prodiet Evaluation and Compliance Kimberly Card 100 Throckmorton 81 Ste 1300 sere Fort Worth, TX 76102-2802
(817) 415-2717 Fax: [817) 415-3092 Kimbprty.card@radioshack.com TRANSMOBOT INSTALLATION 1- Follow alll operating Instructions and precautions to charge your "6.0V." rechargeable battery pack. ote: most rechargeable batterles need charging when newly purchased. 2- Turn batlesy compartment lock located on bottom of Transmobot. Eo emove battery compartment and set aside for future use. Insert fully charged batlery pack into battery compartment opening and stide forward. Turn battery compartment lock atl the way fo lock battery pack In place. RADIO CONTROL DRIVING 4. $ilde ON/OFF to ON. The top bution on the driver's sult 'ights. 2. Fully extend the antenna on the transmitter and slide OFF/ON on the transmitter to ON. indicator on the transmitter lights. 3. Use the transmitter's control levers ta move and steer the Transmobot. 4, n you finish driving the Transmobot, slide OFF/ON on the Transmobol and the transmitter to OFF. MISSILE FOR AGES 5 AND UP One 9 voll" and 4 "AA" hattarias raquirad
(4 "AA" batteries not included) or One "8 volt" and GV rechargeable battery pack and charger (included) Joystick B foystick A Move joystick left to drive forward to spin left Move joystick down Mov ick right to drive backward . ~ to ee or coast to a stop Controller . power switch Button A TRANSMOBOT FUNCTION CONTROLS press and nol burton _Button B Install fully charged rechargeable balterles or newly purchased disposable batteries into the misiite launching function reverse transforming Transmobot chassis and transmitter In the correct position as Indicated. Install transmitter antenna as indicated. Move power switches located on the bottom of the Transmobot chassis and front of the transmitter to the on positions. Fully extend transmilter antenna. Place transbol on a flal level surface.
* Td drive forward, move *Joysiick AY upward.
+ To drive in reverse, move Joystick A downward.
+ To spin right, move Joystick B* to the right.
+ Td spin left, mave "Joystick A" to the left. Fos transforming and missile launching function, press and hold button A" on the front of the transmitter. Tha missiles will automatically taunch when Transmobot is fully extended. To yeverse transforming, press and hold bution B* on the front of the transmitter. Replace missites in fauncher as shown. HOW TO RECHARGE THE NI-CD BATTERY PACK The newly purchased Ni-Cd Pack (6.0V,620mAH) Is nat charged. Reeharge hefore starting. How to use the special charger (6.0V 180mA) for Ni-Cd Packs:
+ Plug the charger into an ordinary household outiel. e@ (LED) light on the charger should tight up when the battery ck Is being charged.
+ Average recharging time {s approximately 4 to 5 hours. WARNING
- Bq not charge the Battery Pack immetilately after use. Wait until it Is cooled before charging.
+ Be sure fo observe the indicated charging time. The NiCd Battery Pack and Charger
{6,0V 180mA) are designed fo be charged for 4 to 5 hours. Do not charge for aver 5 hours.
+ Avoid short clreuits. Short circuits will cause overheating, burning of the conts and other damages to the Battery Pack and Charger.
+ The N-Cd Battery Charger should be used for charging one Battery Pack (6.0V, 620mAH). not use the Charger for charging more than one Battery Pack ata time, or for charging other types af batteries and battery packs. not use the Charger as a direct current outlet for ather electrical appliances or machines. ie. sure that the Batfery Pack and Charger are kept aul of the hands of infants and small thildren while charging.
+ De not charge near fires, where the tamperature i: extremely high, or where it is wel or damp.
+ The Charger will become slightly heated white charging. Allow sufficient free space around the Charger.
+ the power of the haltery pack is weak in spite of proper charging. The batteries may be wort oul from repeated use. Replace it with a naw Hi-Gd battery pack.
> Dispose of used Ni-Cd battery packs correctiy.
+ Disconnect the supply before making or breaking connections to the battery,
+ The charger used with the toy are to be regularly examined for damage to the plug, enclesure and ather parts, and that in the evant of such damage, the toy mus! not be used with this cflarger unit the damage has been repaired. The toy must only he used with the recommended transformer;
. Tha charger is not a tay. 4- Check batteries frequently. 2. Always replace with fresh alkaling beitesies. 3- Check battery terminals for contact. 4- Aways tum gwitch off when not in asa,
- Run on smodth level surfaces, Shoots missiles Ni-CD RECHARGEABLE Wher the recharging is BATTERY PACK &
over, remove the charger 8H fram the household GHARGER outlet and disconnect the battery connector from the charger. WARNING: Do not aim attachment at eyes or face. Do not use missiles or projectiles other than those supplied with the toy or recommended by the manufacturer. NOTE: This equipment has baen teste and found to comply with the fimits for a Class B digital device, pursuant bo Part 16 of the FCC Rules, These limits are designed to provide reasonable protection against harmtul interference in a residential Instaliation. This eqaipment generates, uses and can radiate radio frequency energy and, if not installed and used In accordance with the instructions, may cause harmtul interference to tadia communications. This device complies with Part 15 of the FCC Rules. Operation Is subject to the folfowing two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any intarferance recelved, including interfarence that may cause undesired operation. ning: Changes or modifications ta this unit nat expressly approved by the party responsible for compliance could vold the user's authority to operate the equipment. However, there [s ne guarantee (hat interference will not occur in a particular installation. {f this equipment doas cause harmful interference to radia ar television reception, which can be determined by turning the equipmant off and on, the user Is encouraged to Iry te correct {he Interierunce by ana or more af the following measures: Reorient or relecata (he receiving antenna. increase Ihe separation batwaen the equipmant and receiver. Connect the equipment into an outlot on a clrcult different fram that ta which the receiver Is needed. Consult he dealer or an exparlenced radlo/TV technician for help. i