FCC ID: Q3K-PTP5GAX 5 GHz High Performance PtP Outdoor Unit

RADWIN 2000 EC00, RADWIN 2000 EI00 5 GHz High Performance PtP Outdoor Unit REFERENCE GUIDE Regulatory Compliance FCC/ISED - Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and ISED RSS standards. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Outdoor units and antennas should be installed ONLY by experienced installation professionals who are familiar with local building and safety codes and, wherever applicable, are licensed by the appropriate government regulatory authorities. Failure to do so may void the product warranty and may expose the end user or the service provider to legal and financial liabilities. Resellers or distributors of this equipment are not liable for injury, damage or violation of regulations associated with the installation of outdoor units or antennas. The installer should configure the output power level of antennas according to country regulations and antenna type. Caution Prudence Les units extrieures et les antennes doivent tre installs que par des professionnels expriments d'installation qui sont familiers avec les normes locales et les codes de scurit et, si applicable, sont agres par les autorits gouvernementales de rglementation comptents. Ne pas le faire peut annuler la garantie du produit et peuvent exposer l'utilisateur final ou le fournisseur de services financiers. Revendeurs ou distributeurs de ces quipements ne sont pas responsables des blessures, des dommages ou violation des rglements lis l'installation des units extrieures ou des antennes. L'installateur doit configurer le niveau de puissance de sortie des antennes conformment aux rglementations nationales et le type d'antenne. d'obligations juridiques et RADWIN 2000 EC00, RADWIN 2000 EC00 Reference Guide i This equipment should be installed and operated with a minimum safe distance between the radiator and your body as indicated in the Antenna Details Table. Warning Avertissement Cet quipement doit tre install et utilis avec une distance de scurit minimale entre le radiateur et votre corps, comme indiqu dans le Tableau des Dtails de L'antenne. The device is granted to operate under FCC Rules in the 5.15-5.25 GHz and 5.725-5.85 GHz bands. L'appareil est autoris fonctionner selon les rgles de la ISDE dans la bande 5,725-5,85 GHz. Warning Avertissemen This device complies with Part 15 of the FCC rules and with ISED license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause undesired operation. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes:

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. RADWIN 2000 EC00, RADWIN 2000 EC00 Reference Guide ii Overview RADWIN 2000 EC00, RADWIN 2000 EI00 are high performance Point-to-Point outdoor units that operate in the 5 GHz band that can deliver peak capacity of up to 1.2 Gbps. RADWIN 2000 EC00 is the connectorized form factor and RADWIN 2000 EI00 is the integrated antenna form factor RADWIN 2000 EC00 form factor can be connected to a wide range of directional antennas. RADWIN 2000 EI00 form factor incorporates a 24 dBi gain directional antenna RADWIN 2000 EC00, RADWIN 2000 EI00 include a field proven air interface that ensures best-in-class link connectivity in harsh spectrum for backhaul and access as well as wireless CCTV and additional applications that require robust connectivity. For this purpose, RADWIN 2000 EC00, RADWIN 2000 EI00 are designed to deliver an impressive packet switching power to guarantee full capacity, regardless of traffic packet size. Enabling minimum TCO, the RADWIN 2000 EC00, RADWIN 2000 EI00 are extremely reliable and durable, complying with IP67, NEMA Type 4 enclosure rating. The unit features a built-

in GPS for TDD synchronization and is powered by PoE Basic Features:

Modulation OFDM - BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM, 4096QAM Operating frequency range and Channel Bandwidths:

o 5150 5250 MHz at 20, 40, 80 MHz CBW (*only under FCC Rules) o 5725 5850 MHz at 20, 40, 80 MHz CBW Supporting geolocation based configuration capability Condition of Use The RADWIN 2000 EC00 and RADWIN 2000 EI00 is a proprietary radio devices that can only be deployed and maintained by RADWIN professional installers or its authorized subcontractors FCC Rules and ISED Regulation Restrictions The device firmware is factory programmed to operate under the FCC rules and ISED regulation restrictions. The firmware is locked and inaccessible by any third party. The device incorporates geo-location capability and will only operate within the boundaries of the regional restrictions. Antenna RADWIN 2000 EC00 form factor can be connected to a wide range of directional antennas as detailed in the certified antennas table RADWIN 2000 EI00 form factor incorporates a 24 dBi gain directional antenna RADWIN 2000 EC00, RADWIN 2000 EC00 Reference Guide 1 Certified Antenna Following is the antennas certified for use with the RADWIN 2000 EC00, RADWIN 2000 EI00:

Antenna Type Model Number Antenna Max Gain (dBi) Dir BW (deg) Integrated MR0284310 External Flat RW-9622-5001 External Dish RW-9721-5158 External Dish RW-9732-4958 External Dish RW-9732-4965 24 28 28 32 25 9 5 5.6 4 7 Safe Distance

(cm) 135 205 185 300 145 Maximum Output Power 5725 5850 MHz band - FCC Part 15 Subpart E, ISED RSS 247 The maximum output power can be set as follows, when operating in the 5.725-5.85 GHz band, under FCC 47 CFR Part 15.407 New Rules and ISED RSS-247 regulations. Total output power is limited to 29 dBm. 5150 5250 MHz band FCC Part 15 Subpart E The maximum output power can be set as follows when transmitting in the 5.15-5.25 GHz band, under FCC 47 CFR Part 15.407 New Rule. Total output power is limited to 28 dBm and the EIRP is 53 dBm Radio parameters accessible by end-user The following parameters can be accessed by user:

1. Output Power (constrained to the limitations) 2. Frequency channel 3. Channel bandwidth RADWIN 2000 EC00, RADWIN 2000 EC00 Reference Guide 2

LABEL AND LABEL LOCATION RADWIN 2000 EC00 label Artwork RADWIN 2000 EI00 label Artwork Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021 RADWIN 2000 EC00 label Location Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021 RADWIN 2000 EI00 label Location Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021

Agent Authorization Company:

RADWIN Ltd. Address:

27 Habarzel Street Tel Aviv, 6971039 Israel Product Name: 5 GHz High Performance PtP Outdoor Unit Model Number(s): RADWIN 2000 EC00, RADWIN 2000 EI00 Product Description: 5 GHz High Performance PtP Outdoor Unit We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Shlomo Weiss Title:

Standardization Officer Company: RADWIN Ltd. Date: January 10, 2023 Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021

Section 2.911(d)(5)(i) Certification Equipment Type Company name: RADWIN Ltd. Address:

27 Habarzel Street Tel Aviv, 6971039 Israel Product Name: 5 GHz High Performance PtP Outdoor Unit FCC ID: Q3K-PTP5GAX Model(s): RADWIN 2000 EC00, RADWIN 2000 EI00 2.911(d)(5)(i) Equipment Type We, RADWIN Ltd. (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List Yours sincerely, Name: Shlomo Weiss Date: February 7, 2023 Title: Standardization Officer Company name: RADWIN Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021

Section 2.911(d)(5)(ii) Certification Applicant (Covered List ) Company name: RADWIN Ltd. Address:

27 Habarzel Street Tel Aviv, 6971039 Israel Product Name: 5 GHz High Performance PtP Outdoor Unit FCC ID: Q3K-PTP5GAX Model(s): RADWIN 2000 EC00, RADWIN 2000 EI00 2.911(d)(5)(ii) Applicant filing We, RADWIN Ltd. (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Shlomo Weiss Date: February 7, 2023 Title: Standardization Officer Company name: RADWIN Ltd. Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021 2.911 (d)(5)(ii) Applicant Attestation v1.2

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: Q3K-PTP5GAX Date: January 10, 2023 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Security Descriptions In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Shlomo Weiss Title: Standardization Officer Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021

FCC Request Date: January 11, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: RADWIN 2000 EC00, RADWIN 2000 EI00 FCC ID: Q3K-PTP5GAX To whom it may concern;

The enclosed documents constitute a formal submittal and application for Equipment Authorization for a software defined radio pursuant to the following rules:

Subpart C of Part 15 of the FCC rules (CFR 47) The device is a 5 GHz Point-to-Point outdoor unit . The application is seeking approval as a software defined radio. Name: Shlomo Weiss Date: January 11, 2023 Title: Standardization Officer Signature of applicant Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021

Model Difference Declaration Letter 1. 2. RADWIN 2000 EC00 RADWIN 2000 EI00 The models indicate 2 form factor configurations as shown below 1. 2. RADWIN 2000 EC00 Connectorized N-Type for connecting external antennas RADWIN 2000 EI00 Integrated antenna Name: Shlomo Weiss Title: Standardization Officer Signature of applicant:

Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021

FCC Software Configuration Control Declaration Date: January 12, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept Product/ Model Number: RADWIN 2000 EC00, RADWIN 2000 EI00 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio RDWN77 FCC Software Configuration Control Declaration Rev1.1 parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Shlomo Weiss Date: January 12, 2023 Title: Standardization Officer Signature of applicant FCC Software Configuration Control Declaration Rev1.1 Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021

Section 2.911(d)(7) USA Agent for Service of Process 27 Habarzel Street Tel Aviv, 6971039 Israel Company name: RADWIN Ltd. Address:

Product Name: 5 GHz High Performance PtP Outdoor Unit FCC ID: Q3K-PTP5GAX Model(s): RADWIN 2000 EC00, RADWIN 2000 EI00 22.911(d)(7) USA Designated Agent for Service of Process We, RADWIN Ltd. (the applicant) designate RADWIN Inc. for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-

related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: RADWIN Inc. Address:

900 Corporate Drive Mahwah, NJ ,07430 USA FRN Number: 0033500885 Contact Name: Dan Weitzman Telephone No: +1-201-9620453 Email: dan_w@radwin.com Applicant Company name: RADWIN Ltd. Address:

27 Habarzel Street Tel Aviv, 6971039 Israel FCC Grantee Code: Q3K Contact Name: Shlomo Weiss Telephone No: +972-3-7662988 Email: Shlomo_weiss@radwin.com Signature: Danny Weitzman Title: VP, Global Professional Services Date: March 8, 2023 Signature:

Title: Standardization Officer Date: March 8, 2023 Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com name is a registered trademark of RADWIN Ltd. All rights reserved, March 2021 2.911 (d)(7)USA Agent v1.4