1.Products Features:
Product size:100*10037mm Input:DC5V/3A Or 9V/1.5A (MAX) Output:
Type-C:5V/2A Or 9V/1.1A(MAX)Or USB/Micro USB/iphone port:5V/2A(MAX) Wireless Charge:10W (MAX) Total output power: 10W (MAX) In The Box
-1. dock
-Cable Contact:
-Color: E-mail Black 1 _ Designed in U.S.A
-White - Manufactured in China 4.How to use your u-dock:
a. Connect the Type Ccable provided to the power input on the back of the dock. b. Connect the other end of the USB cable to a wall adapter (not provided). cc. Please make sure the wall adaptor has enough voltage and ampere rating, Support Cover Charging Connector USB Port 2.Range of application:
6 @
Type @
3.Remarks:
a, The device can used for most of electronic products with lightning or micro usb or type c connectors,and wireless charge with QI standard. b. Phone with Cover U-Dock will accommodate most phone with phone covers. Thick Phone covers may not allow the connector to engage with the wheel.
Type C Input Turn Wheel/Diat d. Place your phone on the wireless pad if your phone can support wireless charging. fe. To charge on the dock, lift the cover, turn the wheel toselect the connector tomatch your phone type and dock.
{. Additional USB port on the side to charge one more device 1Aoutput. eo FCC Statement This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions:
(4) This device may not cause harmful interference, and (2) this devicemust accept any Interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the partyresponsible for compliance could void the User's authority tooperate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and canradiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totry to correct the Interference by one or more of the following measures:
+ Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help, The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device @ distance of 15 cm surrounding the device and 20, em above the top surface of the device must be respected This device complies with Part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and any other radio device
' Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.