FCC ID: 2AGU6007 Sonic Glow Hovertrax

OWNERS MANUAL Read and understand this entire manual before allowing child to use this product! For assistance contact Razor. DO NOT RETURN TO STORE. NOTE: Manual illustrations are for demonstration purposes only. Illustrations may not reflect exact appearance of actual product. Specifications subject to change without notice. Please have your product along with the 19 character product I.D. code with you before contacting Razor for warranty assistance and/or replacement parts. Product I.D. Code: _____________ - ____________ - ____________ CONTENTS Introduction .......................................................................................................1 Safety Warnings .............................................................................................2-3 Pre-Ride Checklist .............................................................................................3 Before You Begin ...............................................................................................4 Assembly and Set Up ........................................................................................5 Charging the Battery .........................................................................................6 Power Level Indicator ........................................................................................6 How to Operate ............................................................................................ 7-11 Repair and Maintenance .................................................................................12 Troubleshooting Guide ....................................................................................13 Warranty and Customer Service Contact Information ..................................15 INTRODUCTION This manual will help you understand, set up and safely use the Razor Sonic Glow Hovertrax. It is important that you adhere to all safety warnings and cautions that appear throughout and that you use good judgment when riding, so keep reading!

A SPECIAL TECHNOLOGY, WITH NEW CONCEPTS FOR CONTROL AND SAFETY As is obvious the first time you see it, the Razor Sonic Glow Hovertrax is different from things you may have ridden before. No handlebars. No front or rear wheel. No brake. The new Sonic Glow Hovertrax is such a product, and it moves, which means if you are interested in riding it you should be interested in learning how to do that properly and if you are interested in minimizing the risk of falling off or being injured, you should be very interested in focusing on how to ride this product as safely as possible. Helping you do that is the goal of this manual and other warnings. THIS SONIC GLOW HOVERTRAX, LIKE RAZORS OTHER EXISTING HOVERTRAX PRODUCTS MOVES AND YOU MUST UNDERSTAND AND FOLLOW THE INSTRUCTIONS IN ORDER TO MAXIMIZE YOUR FUN AND MINIMIZE RISKS OF INJURY PRESENTED BY RIDING THIS NEW MOVING PRODUCT. MOVEMENT OF THE RAZOR SONIC GLOW HOVERTRAX IS CONTROLLED BY THE ANGLE OF THE FOOT PLATFORMS, WHICH IS DETERMINED BY PRESSURE APPLIED BY THE RIDERS FEET ON THE PLATFORMS. Different? Well, yes, the Sonic Glow Hovertrax is different. It is an electrically motorized, computerized, gyroscopically-

balance-assisted, independently articulated, dual-platform two-wheeled personal mobility system. If that sounds unlike any bicycle, scooter, RipStik, roller skate or water ski you have ever used, youre on the right track. However, the Razor Sonic Glow Hovertrax does not operate magically, and it does not fly, float or disappear. Its movements are not controlled remotely, or by the riders brainwaves or earnest good wishes, and it has neither a steering wheel, nor a brake, nor external stabilizers of any kind. Yet it can go, stop, turn and back up and all of this is controlled solely by the rider's feet moving at angles relative to the ground. THIS IS CRUCIAL TO RECOGNIZE AND TO REMEMBER AT ALL TIMES. The angle of your feet forward, level or rearward on each foot platform is how Sonic Glow Hovertrax receives, processes and executes instructions from the rider. This will affect the operation of the Razor Sonic Glow Hovertrax far more than leaning or "shifting body weight" alone. WARNING: Read this manual including both "Safety Warnings" (pages 2-3) and "How to Operate" (pages 7-11) and learn to ride safely!

1 OWNERS MANUAL SAFETY WARNINGS WARNING: Whenever you ride the Sonic Glow Hovertrax you risk serious injury or death from collisions, falls or loss of control. To ride safely, YOU MUST READ AND FOLLOW THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL. WARNING: Riding any electric product can be a hazardous activity. CHECK AND MAINTAIN RAZOR SONIC GLOW HOVERTRAX Certain conditions may cause the equipment to fail without fault of the manufacturer. Like other electric ride-on products, the Razor Sonic Glow Hovertrax can and is intended to move, and it is therefore possible to lose control, fall off and/or get into dangerous situations that no amount of care, instruction or expertise can eliminate. If such things occur you can be seriously injured or die, even when using safety equipment and other precautions. RIDE AT YOUR OWN RISK AND USE COMMON SENSE. WARNING: Failure t o read and understand How to Operate section of this manual (pages 7-11) increases risk of injury due to falls or other incidents. WARNING: NOT FOR RIDERS UNDER AGE 8 OR HEAVIER THAN 176 LB (80 KG). DO NOT EXCEED THE WEIGHT LIMIT OF 176 lb

(80 kg) including backpacks and other items that might be carried. Exceeding the weight limit could injure the rider and damage the Razor Sonic Glow Hovertrax. Rider weight alone also does not necessarily mean a persons size is appropriate to fit or maintain control of the Razor Sonic Glow Hovertrax. Keep this product away from small children and remember that this product is intended for use only by persons who are, at a minimum, completely comfortable and competent while operating the product. Razor recommends that children under the age of 8 not be permitted to use this product. This recommendation is based not just on age or weight or height it reflects consideration of expected maturity and skills as well as physical size. The recommended rider age of 8 years or older is only an estimate and can be affected by the riders size, weight, or skills not every rider 8 years old or older will be suited to the product. Certainly, any rider unable to fit comfortably on the Razor Sonic Glow Hovertrax should not attempt to ride it, but a parents decision to allow his or her child to ride this product should be based on the childs maturity, skill, and ability to follow rules. Razor emphasizes that adults are strongly advised not to disregard Razors recommendations or permit younger children to ride the Razor Sonic Glow Hovertrax. Because products, like the Razor Sonic Glow Hovertrax, can and do present potential hazards plainly associated with their use, it is well recognized THE NEED FOR EXERCISE OF PARENTAL RESPONSIBILITY IN SELECTING RIDING PRODUCTS APPROPRIATE TO THE AGE OF A RIDER, OR PARENTAL SUPERVISION IN SITUATIONS IN WHICH CHILDREN OF VARIOUS AGES MAY HAVE ACCESS TO THE SAME RIDING PRODUCTS, IS IMPORTANT. Not every product is appropriate for every age or size of rider, and recommendations are intended to reflect the nature of the hazards and the expected mental or physical ability, or both, of a rider to cope with the hazards. Persons with any mental or physical conditions that may make them susceptible to injury, impair their physical dexterity or mental capabilities to recognize, understand, and follow safety instructions, and to be able to understand the hazards inherent in a products use, should not use or be permitted to use products inappropriate for their abilities. Persons with heart conditions, head, back or neck ailments (or prior surgeries to these areas of the body), or pregnant women, should be cautioned not to operate this product. WARNING: Always inspect the Razor Sonic Glow Hovertrax prior to use. Properly inspecting and maintaining your product can reduce the risk of injury. Before use, check to confirm that any and all guards or covers are in place and in serviceable condition. Check that the parts are functioning properly, that the tires are not damaged or worn excessively. The Razor Sonic Glow Hovertrax should be maintained and repaired in accordance with the manufacturers specifications, using only the manufacturers authorized replacement parts, and should not be modified from the manufacturers original design and configuration. Replace worn or broken parts immediately. Always check the battery charge before using the Razor Sonic Glow Hovertrax. Do not ride the Razor Sonic Glow Hovertrax when its battery is low, as indicated by a flashing red light and beeping. The Razor Sonic Glow Hovertrax may stop operating and cause you to fall. Use only Razor Sonic Glow Hovertrax charger. WARNING: Check local laws and regulations to see where and how you may use your Razor Sonic Glow Hovertrax legally. Follow all applicable laws for vehicles and pedestrians. SAFETY GUIDELINES FOR CONTINUED USE:

AN IMPORTANT MESSAGE TO ALL USERS Periodically review this information and make sure that you understand all warnings, cautions, instructions and safety topics. Do not let others ride the Razor Sonic Glow Hovertrax until they have read this manual. Any type of wheeled activity can be hazardous. Wheels can, and are intended to move and it is therefore possible to get into dangerous situations and/or lose control and/or fall off. In such situations serious injury or death could occur. Always be aware of the activity around you. Use the Razor Sonic Glow Hovertrax in areas free from fixed or moving hazards. Watch your surroundings for pedestrians, animals and riders of other wheeled devices. WARNING: Only use the Razor Sonic Glow Hovertrax indoors or on completely smooth surfaces. Avoid obstacles and slippery surfaces, which could result in a loss of balance or traction and cause a fall. See the section on Terrain for more guidelines. WARNING: Do not lift the Razor Sonic Glow Hovertrax off the ground when the product is turned on. Do not turn on the Razor Sonic Glow Hovertrax in mid-air. This will cause the wheels to spin freely which could result in injury to yourself or damage to things around you. Ride defensively. Watch out for potential obstacles that could catch your wheel(s) or force you to swerve suddenly or lose control. Be careful to avoid pedestrians, skaters, skateboards, scooters, bikes, children or animals who may enter your path, and respect the rights and property of others. Never carry passengers or allow more than one person at a time to ride the electric product. Never use headphones or a cell phone when riding. Never hitch a ride with another product. Do not ride the Razor Sonic Glow Hovertrax in wet or icy weather and never immerse this electric product in water, as the electrical and drive components could get damaged by water or possibly create other unsafe conditions. NOTICE: This manual contains many warnings and cautions concerning the consequences of failing to maintain, inspect or properly use your Razor Sonic Glow Hovertrax product. Because any incident can result in serious injury or even death, we do not repeat the warning of possible serious injury or death each time such a possibility is mentioned. 2 SAFETY WARNINGS Wet, slick, bumpy, uneven or rough surfaces may increase risks. Do not ride this electric product in mud, ice, puddles or water. Avoid excessive speeds that can be associated with downhill rides. Never use near steps or swimming pools. Do not ride at night or when visibility is limited. Be careful and know your limitations. Risk of injury increases as the degree of riding difficulty increases. The rider assumes all risk associated with aggressive riding activities. WARNING: Never operate any moving product, including the Razor Sonic Glow Hovertrax, while under the influence of drugs or alcohol. PROPER RIDING ATTIRE Always wear proper protective equipment, such as an approved safety helmet (with chin strap securely buckled). A helmet may be legally required by local law or regulation in your area. Elbow pads, kneepads, wrist guards, a long-sleeved shirt, long pants and gloves are recommended. Always wear athletic shoes (lace-up shoes with rubber soles) and keep shoelaces tied and out of the way of the wheels, motor and drive system. Never ride barefooted or in sandals. PRE-RIDE CHECKLIST USING THE CHARGER The charger supplied with the electric product should be regularly examined for damage to the cord, plug, enclosure and other parts. In the event of such damage, the product must not be charged until the charger has been repaired or replaced. Use only with the recommended charger. Use caution when charging. The charger is not a toy. Charger should be operated by an adult. Do not operate charger near flammable materials. Unplug charger and disconnect from product when not in use. Always disconnect from the charger prior to wiping down and cleaning your product with damp cloth. FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS INCREASES RISK OF SERIOUS INJURY. USE WITH APPROPRIATE CAUTION AND SERIOUS ATTENTION TO SAFE OPERATION. Wheels Practice riding only in wide open areas clear from curbs, parking blocks and other obstacles, including things you may fall on or into if you lose your balance. Impacting the wheels against any hard surface can damage the wheels. Wheels are not covered under your limited warranty. Hardware/Loose Parts Before every ride, check all parts, such as nuts, bolts, fasteners, etc., to ensure they are secure and assembled correctly. There should not be any unusual rattles or sounds from loose parts or broken components. If the product is damaged, do not ride. Reference Safety Warnings on pages 2 and 3 of this manual. Safety Gear Always wear proper protective gear, such as an approved safety helmet. Elbow pads, kneepads and wrist guards are recommended. Always wear athletic shoes (lace-up shoes with rubber soles) and keep shoelaces tied and out of the way of the wheels, motor and drive system. NEVER RIDE BAREFOOTED OR IN SANDALS. Laws and Regulations Always check and obey any local laws or regulations. Storage Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use. Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed at the back of this manual. 3 BEFORE YOU BEGIN Remove contents from box. Remove the separators that protect the components from damage during shipping. Inspect the contents of the box for scratches or dents that may have occurred during shipping. Because the Sonic Glow Hovertrax was assembled and packed at the factory, there should not be any problems, even if the box has a few scars or dents. Please keep this box in case you need to send the Sonic Glow Hovertrax back for service or repairs. If you use another box, Razor will not be responsible for any damage caused during shipping. MAKE SURE POWER SWITCH IS TURNED OFF BEFORE CONDUCTING ANY MAINTENANCE PROCEDURES. Estimated Set-Up Time Allow up to 5 hours for initial charge (see page 6 for charging information). Charger Note: Charger design may vary from one shown 2. WARNING:

DO NOT USE NON-RAZOR PARTS WITH YOUR PRODUCT. The Sonic Glow Hovertrax has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame and all other parts. Certain aftermarket components may not be compatible and will void the warranty. Anti-Slip Foot Platforms On/Off Button Battery/Power Mode Indicator 1. Product ID Locations:

(See locations to the left) 1. Frame (Underneath Product) 2. Charger 3. UPC Side of Box (Not Shown) LED Lights LED Lights Charger Port Rubber Tires Box Contents:

Sonic Glow Hovertrax Charger Owners Manual Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed at the back of this manual. 4 ASSEMBLY AND SET-UP Calibration Confirmation Note: Your Sonic Glow Hovertrax should have been calibrated at the factory. 1 Place Sonic Glow Hovertrax on a level surface. 2 Turn power ON. If product remains level or adjusts to become level, calibration has been confirmed. No further steps are needed. If product begins to roll or does not move into a level orientation, see Calibrating Sonic Glow Hovertrax. Calibrating Sonic Glow Hovertrax 1 Place Sonic Glow Hovertrax on a level surface. 2 Manually adjust the platforms so they are level to the ground. 3 While keeping the product level, turn power ON and HOLD until product beeps and lights flash (approximately 15-20 seconds). 4 Turn power back OFF. 5 Calibration complete. Note: Once the product has been calibrated, no matter what position (angle) the platforms are in when it is turned off, the platforms will automatically self-balance themselves back to the calibrated position when product is turned on. 5 CHARGING THE BATTERY Your Sonic Glow Hovertrax comes with a lithium-ion battery pack. Your Sonic Glow Hovertrax may not have a fully charged battery; therefore you must charge the battery prior to use. Be sure to charge the battery in a clean, dry location away from direct sunlight, flames or sparks. Use only Razor Sonic Glow Hovertrax charger. Initial charge time: 5 hours. Recharge time: up to 5 hours, even if the light turns green. Recommended maximum charging time is 24 hours. Run time: Up to 30 minutes of continuous ride time. Run time may vary depending on riding conditions, rider weight, climate, and/or proper maintenance. Constant stopping and starting may shorten ride time. Do not charge at or below 32 F (0 C). Always charge the battery immediately after riding. Do not allow charger or battery pack to overheat. If they seem warm, allow to cool down. Charge only at room temperature. Do not place product or charger in the sun or warm environment. Keep at normal room temperature. Fully charge battery before storing for extended periods of time. Unplug charger from the wall outlet when not in use. Failure to recharge battery periodically may result in a battery that will not accept a charge. Make sure the Sonic Glow Hovertrax power switch is turned OFF when product is not in use. If the power switch is left on for an extended period of time, the battery may reach a stage at which it will no longer hold a charge. Charger Note: Charger design may vary from one shown 1 Plug the charger plug into wall outlet. The light on the charger should be green. Note: If green light (LED) does not turn on, try a different outlet. 2 Make sure the power switch is in the OFF position. Plug the charger into the charger port on the Sonic Glow Hovertrax. The light on the charger should turn red during charging. The light will turn green again when charging is complete. Model Voltage

(Nominal) Vdc Capacity

(Nominal) Ah Charge Temperature Range Operating Temperature Range Sonic Glow Hovertrax 25.2 2.0 0 to 40C 32 to 104F

-10 to 40C 14 to 104F Battery Power Level Indicator Green + Orange + Red Indicator Lights Battery is sufficiently charged. Red + Orange Indicator Lights Charge product as soon as possible. If you continue to ride the product, the orange light will turn off. The red light will begin flashing and the product will begin to beep. Flashing Red Indicator Light and Rapid Beeping Step off and charge immediately. The battery is out of power and the product will automatically shut off. Do not attempt to ride until product has been recharged. Red Orange Green Battery Indicators 6 WARNING:

Use ONLY with the recommended charger. Batteries are only to be charged under adult supervision. The charger is not a toy. Always disconnect the charger before wiping down and/or cleaning the Sonic Glow Hovertrax with a damp cloth. The charger supplied with the Sonic Glow Hovertrax should be regularly examined for damage to the cord, plug, enclosure and other parts. In the event of such damage, the Sonic Glow Hovertrax must not be charged until it has been repaired or replaced. Chargers have built-in overcharge protection to prevent battery from being overcharged. Wall outlet - Green (stand by) Wall outlet and product - Red

(charging) Wall outlet and product - Green

(charged) Note: Continue charging product even if light turns green prior to 5 hours. WARNING: Failure to recharge the battery at least once a month may result in a battery that will no longer accept a charge. WARNING: The Sonic Glow Hovertrax will notify you when the battery charge is dangerously low by beeping. The orange battery indicator light will turn off and the red light will begin to flash. If these warnings occur, immediately slow down and safely step off. Turn the product off. Do not attempt to ride again until the battery is recharged. HOW TO OPERATE HOW IT WORKS The Sonic Glow Hovertrax responds to the riders foot movements. Remember this. The Sonic Glow Hovertrax moves due to fore and aft foot platform tilt caused by the riders foot (or feet). Movement, speed, and stopping are controlled by the degree to which the riders feet cause the foot platforms of the Sonic Glow Hovertrax to no longer be parallel to the ground. Note: Do not lift the Sonic Glow Hovertrax off the ground when it is turned on. Do not turn on the Sonic Glow Hovertrax in mid-air. When the product is ON, the gyroscopic mechanized balancing feature of the Sonic Glow Hovertrax tries to keep the foot platforms of the product parallel to the ground. In use, Sonic Glow Hovertrax then detects changes from level which are caused by fore and aft pressure on the foot platform(s) applied by the riders feet. Such changes are interpreted by the Sonic Glow Hovertrax as instructions to make the wheels move. Sonic Glow Hovertrax tries to re-level a forward tilt by accelerating, and tries to level a rearward tilt by decelerating. PERIODIC RECALIBRATION IS RECOMMENDED The Sonic Glow Hovertrax self-balancing features are calibrated to function with a detected resting position that is level. Over time and usage, recalibration may be needed to assure level status. If inaccurate calibration persists, this could affect the operation of the unit by sending instructions to the motor(s) to move that may differ from the intended motion. To calibrate the product (see page 5 for additional information):

Turn power OFF. Manually adjust the platforms so they are parallel to the ground. Turn power ON and HOLD until it beeps and lights flash (approximately 15-20 seconds). Turn power back OFF. Calibration complete. Once the product has been calibrated, no matter what position (angle) the platforms are in when it is turned off, the platforms will automatically self-balance themselves back to the calibrated position when turned on. MOVING AND CHANGING DIRECTION:

When a rider stands on the Sonic Glow Hovertrax with an evenly weighted foot that is level on either foot platform:

Pressing toes on both feet downward moves Sonic Glow Hovertrax forward. Pressing heels on both feet downward moves Sonic Glow Hovertrax backward. Turns are done by putting more downward pressure on the front side of the foot platform on the outside of the turn. A rider can spin in place by pushing downward on the front edge of one foot platform while simultaneously pushing downward on the rear edge of the other foot platform. ACCELERATING AND STOPPING:

To go faster or to slow down, press the foot platforms at a greater angle for more and reduce the angles for less. When slowing or stopping, if you continue to apply force to the edges opposite the direction of travel, you may not only stop but continue on to reverse your direction. How does this happen? The fundamental principle is that the Sonic Glow Hovertrax is designed to be at rest when the foot platforms are level and the gyroscopic mechanized balancing feature detects the levelness of the product. This same feature detects foot movements that cause a foot platform to no longer be level and it interprets these changes as orders to move. Thats it. Thats how it works. It does what your feet tell it to do, and the product self-balances itself in order to be ready to detect and implement the instructions provided by a riders feet. Understanding this principle is important for obvious reasons. It also suggests some obvious warnings for riding the Sonic Glow Hovertrax, such as:

Do not jump up and down on it: If you remove a foot (or both feet), then land back on the Sonic Glow Hovertrax and cause the foot platform(s) to change position relative to level in any degree, the machine could and will react by moving immediately in response to an instruction, which can result in loss of rider stability, balance or control. Shifting Weight Alone is not the Issue: Do not presume that shifting weight alone controls motion or, for that matter, that not shifting weight equals stability. Shifting of rider weight may be associated with increase or decrease of foot pressures on the foot platforms, but it is the action of the feet on the foot platforms which instructs Sonic Glow Hovertrax to move. Conversely, if you were to shift your weight without altering the placement or angle of your feet, so that the foot platforms remain level, the Sonic Glow Hovertrax does not receive any signal to interpret. Riding Tip: Certainly the rider may

"lean" on the Sonic Glow Hovertrax, but leaning only affects the foot platform's position to the extent the rider's feet change their position. If the rider's ankles are held at a consistent 90 angle, leaning will result in tilting. Note that leaning can exaggerate shifting of weight, which may affect the ability of a rider to recover to a level posture increasing the possibility of loss of balance. Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed at the back of this manual. 7

HOW TO OPERATE HOW TO CHANGE MODES Green Note: Whatever mode the Sonic Glow Hovertrax was left in when turned off, will be the mode it begins in when turned back on. Turn power switch "ON". Training mode (Default mode from factory) TO CHANGE TO NORMAL MODE Orange Green Note: To go back to training mode, turn power OFF, then press power switch button ON. Press power switch button twice BEFORE all indicator lights come on. Press power switch button twice BEFORE all indicator lights come on. Normal mode Sonic Glow Hovertrax is ready to ride. Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed at the back of this manual. 8 HOW TO OPERATE HOW TO GET ON Once you have charged the battery (see page 6 for charging information):

1. Power On: Set the Sonic Glow Hovertrax on the ground and turn the power on. The battery/power mode indicator will show either one or two lights to indicate mode (see page 8 for instructions on switching modes). Do NOT proceed to step two (2) until all lights on the indicator light up. Riding Tip: Before your very first ride, expect to spend up to ten minutes in this stage of learning how to stand comfortably on the Sonic Glow Hovertrax. 2. First Foot: While standing behind the Sonic Glow Hovertrax, put one foot on a foot platform, closer to the wheel than to the center. Use that foot to activate the foot platform by bringing that foot platform to a balanced, level position. 3. Confirm Activation: Confirm the first foot platform is activated. Move your foot back and forth and feel the response from the product. Play with this single foot platform until you are comfortable keeping the foot platform motion minimal. 4. Step Up: With the first foot platform stable and still, step up on the second foot platform with your second foot. Do this away from furniture and other large objects. Dont use a fixed object to brace or lift yourself Keep your weight evenly distributed between the two foot platforms. If you are uncomfortable; step back off and repeat from step 2. Try to stand on the Sonic Glow Hovertrax without moving. HOW TO RIDE:

5. Stand in Place: Sonic Glow Hovertrax is unique among two-wheeled items in that the active stabilization it provides allows you to stand in place. A scooter or bicycle may balance more easily when it moves, but a Sonic Glow Hovertrax can balance even while stationary. 6. Move Forward: To move forward, press down gradually with your feet on the fronts of both foot platforms. Do not lunge forward or lean excessively, as you may lose your balance. 7. Slow Down: To slow down or stop, apply pressure to the rear edges of the foot platforms by pushing down with your heels. Leaning back somewhat may be useful but remember your feet are giving the instructions! If you continue pushing the rear edges with your heels, you will be able to travel backwards. 8. Turn: To turn left, slightly push your right foot down on the front of the right foot platform; to turn right, push down on the front of the left foot platform. This idea is to make one wheel turn a little bit faster than the other wheel. 9. Rotate in Place: To rotate in place, push down on the front of one foot platform while pushing down with equal force on the rear of the other foot platform. SONIC GLOW HOVERTRAX SPEED CONTROL 10. Not too fast: The max speed of this product is 8 mph (12.8 km/h), however the recommended top operating speed is approximately 5 mph (8 km/h). Speed may be affected by rider weight, surface conditions, battery charge, etc. The Sonic Glow Hovertrax is capable of exceeding the normal operating speed for short periods, which is designed to permit the wheels to react and re-balance the product by helping level itself. Do not attempt to force the Sonic Glow Hovertrax into continuous operation at re-balance speeds, as control will be more difficult and falls more likely. HOW TO GET OFF:

11. Slow down and stop 12. Step to the back 13. Power down Self-balancing Function: If product is not level when powered on it will slowly rotate until it is level. Always wait to mount until it has completely stopped self-leveling and all lights on the battery/power mode indicator are lit. Riding Tip: Your practice on Sonic Glow Hovertrax should be to keep the platform in place and get a feel for the motions that are generated from small changes in your fore/aft foot pressure. Riding Tip: Sonic Glow Hovertrax is best ridden at speeds similar to a brisk walk, not faster. Note: All lights flashing notes a leveling error. Do not ride until flashing stops. NOTE: If Sonic Glow Hovertrax is left on for more than 5 minutes, it will automatically turn off and beep. PRODUCT WARNING SIGNALS The Sonic Glow Hovertrax has several built in protection features, which include:

Self-leveling function: If the product is not level when powered on it will slowly rotate until it is level. Always wait to mount until it has completely stopped self-leveling and all lights on the battery power mode indicator are lit. Training Mode: This product can be set to training mode to operate at a slower speed (see page 8 for instructions). Do not operate in normal mode until you are completely comfortable riding in training mode. Low or charging battery: The battery/power mode indicator light (orange) will indicate insufficient charge for operation by flashing and the product will beep. Excessive angle shutoff: At excessively steep foot platform angles, the product will stop powered operation. 9 HOW TO OPERATE RIDING TIPS Learn to ride the Sonic Glow Hovertrax in a large, safe area free from all forms of interference. Keep your posture upright, but relaxed. Align your body over the Sonic Glow Hovertrax and use a wide stance with your feet close to the wheels. Be alert. Scan both far ahead and in front of you - your eyes are your best tool for safely avoiding obstacles and slippery surfaces. Hold your arms comfortably at your side. Start at a slow and comfortable pace. Never aggressively accelerate or lunge forward. Be careful and considerate of others. Always ride under control at a speed that is safe for you and those around you. Always be prepared to stop. Respect pedestrians by always yielding the right of way. Avoid startling pedestrians. When approaching from behind, announce yourself and slow down to walking speed when passing. Pass on the left whenever possible. When approaching a pedestrian from the front, stay to the right and slow down. SONIC GLOW HOVERTRAX TIPS Once you have charged the battery, follow these six easy steps:

Remember to check for the green battery indicator light before you get on. If it is not lit, the product is not on and you will fall. Do not stand on or near the center or rotating portion of the foot platform. Remember to keep your body relaxed through your back and legs. Stand naturally. Practice controlled stopping. If you stand with one foot on the foot platform with the product on, keep that foot level, or the Sonic Glow Hovertrax will move. Be aware of the width of the Sonic Glow Hovertrax and the path you are traveling. Make sure you will fit. TERRAIN AND AVOIDING HAZARDS, SLIPS AND TRIPS The Sonic Glow Hovertrax is intended for indoors or use on smooth, flat surfaces. However, to prevent loss of traction, you must always be careful when riding and learn to identify and avoid slippery and wet surfaces, loose materials, slopes, potholes and other obstacles. Stop and step off the Sonic Glow Hovertrax over unsafe surfaces or terrain. The Sonic Glow Hovertrax wheels must be able to grip the ground for you to stay upright. Slips occur when the Sonic Glow Hovertrax loses traction, potentially causing loss of control and a fall. Abrupt maneuvers and riding over slippery surfaces, bumps, and loose objects and materials may cause the Sonic Glow Hovertrax to lose traction. Keep alert. Never jump on or off the Sonic Glow Hovertrax with both feet. Please dont ride transversely on a hillside or turn on a slope. This may cause Sonic Glow Hovertraxs balance sensors to be unable to orient themselves to level state, impairing rider control. Avoid riding over any surface where the undercarriage may strike an object. Use caution when riding over any change in terrain. 10 HOW TO OPERATE HEADLINE HEADLINE To Connect to your Bluetooth Speaker WARNING: Do not talk or text on your mobile device while riding. Only change your devices music settings when stationary. 1 Turn Sonic Glow Hovertrax power switch ON. 2 Activate Bluetooth in your handheld devices settings. 3 Find Razor Sonic Glow Hovertrax in your handheld devices list and select. 4 Play your music. Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed at the back of this manual. 11 REPAIR AND MAINTENANCE WARNING: Risk of fireno user serviceable parts. Battery Care and Disposal Do not store in freezing or below freezing temperatures. To properly maintain your battery and ensure maximum battery life, carefully read the Charging the Battery section on page 6 of this owners manual. CONTAINS LITHIUM-ION BATTERY PACK. BATTERIES MUST BE RECYCLED. UL 2271 COMPLIANT. Disposal: Your Razor Sonic Glow Hovertrax uses a lithium-ion battery pack which must be recycled or disposed of in an environmentally safe manner. Do not dispose of a battery pack in a fire. The battery pack may explode. Do not dispose of a battery pack in your regular household trash. The incineration, land filling or mixing of batteries with household trash is prohibited by law in most areas. Return exhausted batteries to a federal or state approved lithium-ion battery recycler. Charger Recycling Lithium-ion Batteries: Lithium-ion batteries are recyclable. You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you. In the US and Canada only:

For more information regarding recycling of rechargeable batteries, call toll free 1-800-822-8837, or visit http://www.call2recycle.org The charger supplied with the electric scooter should be regularly examined for damage to the cord, plug, enclosure and other parts. In the event of such damage, the product must not be charged until it has been repaired or replaced. Caution: Do not handle damaged lithium-ion batteries. To reduce the risk of injury, use ONLY with the charger supplied with this product or a replacement specified by Razor. Wheels Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically inspect wheels for excess wear. Repair Centers For a list of authorized Razor repair centers:

Check online at www.razor.com. Call 866-467-2967 for the center nearest you. Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed at the back of this manual. 12 12 HEADLINENeed Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed at the back of this manual. TROUBLESHOOTING GUIDE

*Product(s) should be stationary and fully charged prior to doing any Troubleshooting. Do not troubleshoot while riding. Problem I dont see Razor Sonic Glow in my Bluetooth device settings I dont hear my music Ive lost my connection to Razor Sonic Glow Hovertrax Solution Try restarting Razor Sonic Glow Hovertrax, by turning it OFF and ON. Try refreshing your handheld Bluetooth devices settings. Make sure your Bluetooth is active or select pair new device. Make sure Razor Sonic Glow Hovertrax power switch is ON. Make sure the volume is up. Move your handheld device closer to the scooter. Charge your Razor Sonic Glow Hovertrax. For more troubleshooting tips or to locate an authorized Service Center in your area, visit our website at www.razor.com or call toll free +1 866-467-2967 to speak to a live Customer Service Representative. Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed at the back of this manual. 13 FCC COMPLIANCE FCC COMPLIANCE FFCCCCIIDD: 2: 2AAGGUU6600007 I7 ICC: 2: 211005566--000077 This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Noottee: T: Thhiis es eqquuiippmmeennt ht haas bs beeeen tn teesstteed ad annd fd foouunnd td to co coommpplly wy wiitth th thhe le liimmiitts fs foor a Cr a Cllaasss B d ddeessiiggnneed td to po prroovviidde re reeaassoonnaabblle pe prrootteeccttiioon an aggaaiinnsst ht haarrmmffuul il inntteerrffeerreenncce ie in a r ffrreeqquueennccy ey enneerrggy ay anndd, i, if nf noot it innssttaalllleed ad annd ud usseed id in an accccoorrddaanncce we wiitth th thhe ie innssttrruuccttiioonnss, m, maay cy caauusse he haarrmmffuul il inntteerrffeerreenncce te to ro raaddiio co coommmmuunniiccaattiioonnss. H. Hoowweevveerr, t, thheerre e iis ns no go guuaarraanntteee te thhaat it inntteerrffeerreenncce we wiilll nl noot ot occccuur ir in a pn a paarrttiiccuullaar ir innssttaallllaattiioonn. I. If tf thhiis es eqquuiippmmeennt dt dooees cs caauusse he haarrmmffuul il inntteerrffeerreenncce te to ro raaddiio oo or tr teelleevviissiioon rn reecceeppttiioon, n, wwhhiicch ch caan bn be de deetteerrmmiinneed bd by ty tuurrnniinng tg thhe ee eqquuiippmmeennt ot offf af annd od on, tn, thhe ue usseer ir is es ennccoouurraaggeed td to to trry ty to co coorrrreecct tt thhe ie inntteerrffeerreenncce be by oy onne oe or mr moorre oe of tf thhe fe foolllloowwiinng g mmeeasuasurreess::

n a reessiiddeennttiiaal il innssttaallllaattiioonn. T. Thhiis es eqquuiippmmeennt gt geenneerraatteess, u, ussees as annd cd caan rn raaddiiaatte re raaddiio o s B diigigittaal dl deevviiccee, p, puurrssuuaannt tt to po paarrt 1t 15 o5 of tf thhe Fe FCCC RC Ruulleess. T. Thheesse le liimmiitts as arre e Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly approved by Razor USA LLC, could void the users authority to operate the equipment. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter.

- WARRAN TY Razor Limited Warranty The manufacturer warranties this product to be free of manufacturing defects for a period of 90 days from date of purchase. This Limited Warranty does not cover normal wear and tear, tires, tubes or cables, or any damage, failure or loss caused by improper assembly, maintenance, storage or use of the Razor Sonic Glow Hovertrax. This Limited Warranty will be void if the product is ever:

used in a manner other than for recreation or transportation;

modified in any way;

rented. The manufacturer is not liable for incidental or consequential loss or damage due directly or indirectly to the use of this product. Razor does not offer an extended warranty. If you have purchased an extended warranty, it must be honored by the store at which it was purchased. For your records, save your original sales receipt with this manual and write the serial number below. __________________________________________ CUSTOMER SERVICE CONTACT INFORMATION Need Help? Visit our website for product support, a list of authorized service centers in the US and customer service contact information at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service contact information is listed below:

AMERICAS EUROPE, MIDDLE EAST, AFRICA ASIA Razor USA LLC P.O. Box 3610 Cerritos, CA 90703 USA

+1 866 467 2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time customersupport@razorusa.com Razor USA LLC (Europe) Handelsweg 2 2742 RD Waddinxveen Netherlands

+44 (0) 120 267 2702 info@razoreu.com Razor USA LLC (Asia) P.O. Box 3610 Cerritos, CA 90703 USA

+81 50 7579 6622 info@razor-asia.com UNITED KINGDOM AND IRELAND AUSTRALIA AND NEW ZEALAND IMPORTED IN JAPAN BY B-PLUS ASIA CORP. Razor USA LLC (UK) Unit 20 Hartnoll Business Centre Post Hill, Tiverton Devon EX16 4NG UK

+44 (0) 120 267 2702 info@razoreu.com Razor USA LLC P.O. Box 4280 Auburn South VIC 3122 Australia

+1 800 954 354 (AU)

+0 800 003 221 (NZ) info@razoranz.com U.S. Patent No. 8,738,278 & RE46964. Additional US and International Patents Pending. Printed in China for Razor USA LLC. Razor USA LLC Kurokawa 3-1, Asaoku, Kawasaki, Kanagawa 215-0035 JAPAN

+81 (0) 44 328 9057 Tel

+81 (0) 44 328 9067 Fax info@razor-asia.com Copyright 2003-2022 Razor USA, LLC. All rights reserved. Razor and the Razor logo design are among the registered trademarks of Razor USA LLC in the United States and/or select foreign countries. Sonic Glow and the Sonic Glow logo design are trademarks of Razor USA LLC. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Razor USA LLC is under license. Other trademarks and trade names are those of their respective owners. Patents and Hovertrax trademark licensed from Inventist, Inc. 1515 US_220307

Sonic Glow Hovertrax - UL 2272 (Certified) - Product Warning Decals (2? of 2) Product Name: Sonic Glow Hovertrax - UL 2272 (Certified) Date: 03/07/2022 DIELINE Color References: | _ Dieline-DO NOT PRINT! | |white [J pms Blackc Ly, Color References Engraved in mold Note Gray background aoes not print!

Size 49.73 mm x 8.86 mm Place D engraved in mold as marked

#8 YA Pw Pt AWARNING i WARN This PRODUCT MOWES WEA LSD Weald 1 ABCA & ARS CONSTAM GTTENTION REQUIRED TO | + FOCID: ZAGLIBDOF IC: 27086-0008 AJC RIG OF FALLS OF INJURY HEOUIFES GREAT CAUTION This dewee complies wath Part 15-of the 250.2W 2.0Ah Cre testes I het: eobes Mawes Cnc. ae M. 1 eee eee eee ee Was 41 qoighl Hh by muempt RSS standards). Operwion is bore 17 4 era re epee subject 19 the tollnwing tea ecedilinns:

ahs E (i) this device may not cause harntul a : interterence, and GF) This devin must bard few caidas eta ma aconpi ary inieriorence received, ray Sen WAY ey an inclutfing inlerierence thal may cause li ia - i Hee), abot Pall to undesired operation, Tenn fares fal Sia Tou be, Boe er Te seat. (Fema chopra Chae <i, Ba A AB ea Cone Soe per Pe Color References PMS Black C, PMS 021 C Mie Le bea Glossy PP Synthetic Paper Size 80 x 20 mm THIC DONAHINMT AARNICe WUAIWCR LCen PERG F Pee ee ee ee E CONSTANT ATTENTION REQUIRED TO G H |

as , AVOID RISK OF FALLS OR INJURY. :

Color References REQUIRES GREAT CAUTION. Product ID Code Label Color References Color References PMS Black C, PMS 021 C . Age 8+. PMS Black C, PMS 021 C White, PMS Black C WMayimum rider weight 176 Ih (RO kai. Al -aaer cehomm. OA IraAns oe. aa aece AAS

; 8 mph (12.8 km/h) m ax speed a aid a ae Pe, PU Po, 2 Material | One ves ot This is not the art. For reference only! Material | This device complies with Part 15 of the Material Glossy PP Synthetic Paper - Use only on flat, dry, level surfaces. Avoid cars and lossy PPS MEME Paper FCC Rules / Industry Canada licence- Glossy PP Synthetic Paper other hazards. ae exempt RSS standard(s). Operation is Size - Not for stunt use. Do not ride at night. 7 Size e thhiarct tn the fallnawing han conditinne Size es mit BEER PR Pe BPP SP Pee ee ea 62x60 mm (1) this device may not cause harmful 42x15mm interference, and (2) this device must f HE OAs nnAkL \

62x87 mm Always wear protective equipment. To reduce risk of injury, user must read and understand owner's manual. Use only Razor Sonic Glow Hovertrax charger. Sonic Glow Hovertrax battery capacity: 50.4 Wh

. Kida we ui mie Friel accept any interference received, including interference that may cause Oe

+ Store indoors when not in use. Do not talk or text on your mobile device while riding. Only change your clevices music settings when stationary. Gheck local laws regarding use in your area. Sonic Glow Howertrax_ 220307 ee es |

undesired operation. Sonic Glow Hovertrax 220307 J Place label G as marked IMAGES ARE FOR REFERENCE ONLY. PLEASE ADJUST ACCORDINGLY.

Razor USA LLC Authority to Act as Agent Date: July 26, 2022 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Intertek Testing Service Shanghai____ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: __July 25, 2023___ By:

(Signature1) _____David Pang________

(Print name) Title:

____Compliance Manager On behalf of: _____Razor USA LLC____

(Company Name) Telephone:

__86 (21) 59768802*125_____ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 041521-14

Razor USA LLC Request for Confidentiality Date: July 26, 2022 Subject: Confidentiality Request for: ______2AGU6007______ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent *1 Permanent Permanent Permanent Permanent Permanent *3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual Razor USA LLC has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

(Signature/Title3) ______ _______David Pang____________

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 041521-14