FCC ID: SJ8-CA544 Wireless Camera

Deluxe Full HD Series CM544554 5.5 Large Touchscreen Monitor with 1080p Pan &

Tilt Camera QUICK START GUIDE WARNING! STRANGULATION HAZARD Children have accidentally become tangled in cords and been strangled. Please keep all cords out of the reach of children and use only the adapters provided. 1 What's included:

Product Overview Wireless Camera 2 Wireless Monitor Getting Started Installing the Monitor & Camera 1. Pull out the isolation sticker on the back of the monitor. Fully charge the monitor using power adapter before first use. Camera must be plugged in at all times. 2. Place the camera in the preferred position. It can be placed on a table/cabinet or mounted on a wall using the mounting bracket (included). 3. To power on the monitor, press and hold the power button for 4~5 seconds. 4. To power on the camera, slide the on/off button to the ON position. 3 Indicator Description Live view 1. Signal indicator:

2. Camera number:

3. Motion Recording enabled Indicator:

If an '

mode.

' appears on the signal bar, the system is "Out of Range".

, This icon indicates monitor is set to auto recording 4. Network Connection Status:

Monitor must be connected to the optional internet cradle

[CRDL500] (sold separately) for remote viewing. Green- Monitor is connected to the internet. White- Monitor is connected to router, but router is not connected to the internet. Red- Monitor is not connected to router. 5. New Record Indicator:

Indicates there are unread new recordings. 4 Press this button, monitor will change to quad mode (if there are 3 or 4 cameras connected to the monitor) or split mode (if there are 2 cameras connected to the monitor). 6. Recording Indicator:

7. Remote Connection:

8. SD Card Overwrite:

full. 9. Vox on:

10. SD Card Indicator:

Icon flashes red when recording is in progress. This icon indicates remote connection to the system via App. This icon indicates the SD card is allowed to overwrite files when it is Displays if an SD card is inserted into the monitor. If white, recording space is available. If red, the SD card is full. Indicates Zoom mode: x1/x1.5/x2 11. Zoom mode:

12. Monitor Speaker Mute:

13. Battery Power Level:

14. Temperature Display:

15. Feeding Reminder:

16. Firmware Download Available:

17. Quad Mode:

a) When entering into quad mode, the default setting is no audio from cameras. b) You can choose one of the cameras and press green when audio is on. Please note you can only turn on audio for one camera at a time. to turn on the audio. This icon will turn C) You can press to turn on the audio and listen to each channel in sequence. 18. SEQ:

In quad or split mode, tapping this button will change channels in sequence and

"SEQ" will appear. 19. Talk Back:

Only appears in single camera Live View mode and when talk button is pressed and held. If a lullaby is playing, lullaby will be paused until the button is released.

, Tap this button to lock and unlock the touchscreen. 20. Unlock the screen:

Operation Key Operation keys appear by tapping any blank location on the screen. If user taps screen without touching any function key, it will time out after 10 seconds and return to Live View mode. 5 1. Menu Setting:

2. Zoom In / Out:

Supports x1, x1.5, x2 digital zoom ratio. 3. Manual record:

Tap this button to record (icon will turn red) and tap again to stop recording. 4. Play back:

Tap this button to view recording file list. 5. LED Light:

Tap this button to turn night light on camera on/off. 6. Lullaby:

Three pre-programmed lullabies. 7. Navigation Controls:

Remotely Pan/Tilt the camera. How to use Audio Only Mode (Video Off) 1. Set VOX off (default setting):

2. Enter Audio only mode: Tap the power button. 3. Exit Audio only mode: Tap the power button or touch the screen. How to use Power Save Mode (both Video and Audio are off) 1. Set VOX on, turn on auto power off

2. Enter Power Save Mode: Occurs 2 minutes after no sound detected or user taps the power button. 3. Exit Power Save Mode: Tap the power button, touch the screen, or a sound is detected. Troubleshooting:

6 1. Out of Range:

- Make sure the camera is connected securely to the power adapter.

- Make sure the camera is paired with the monitor.

If still out of range, you can purchase a repeater (SKU#RE5) to extend the wireless range.

*If the range signal issue is caused by the distance between the camera and monitor, flip up the monitor antenna will help improve the wireless range.

*If adjusting the antenna doesnt improve the signal, the repeater will help improve the wireless range. 7 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Appendix FCC ID Label FCCID: SJ8-CA544 Model: CA544 Size for the label: 10mm X20mm FCCID: SJ8-CA544 TB-RF-074-1.0 Appendix ID Label Location ID LOCATION FCC ID: SJ8-CA544 TB-RF-074-1.0

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2021-12-3>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID SJ8-CA544 Model name CA544 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

RDI Technology (Shenzhen) Co., Ltd. 101 to 401, Building 1, and Building 2, No. 7, Yongyue Road, East Baishixia, Fuyong, Baoan, Shenzhen PRC, China RDI Technology (Shenzhen) Co., Ltd. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail: