FCC ID: 2AUYFRMX3081 Mobile Phone

Greetings from realme Mobile

This guide will show you how to use the phone and its important functions. You

may also visit realme official website to get more information about the phone.

When charging, please place the device in an environment that has a normal

room temperature and good ventilation. It is recommended to charge the

device in an environment with temperature ranging from 5°C~35°C.

Front Camera

Volume Key

Power Key

Back cover can’t be removed.

How to reboot the phone:

Press and hold the Power Button and Volume Up Button at the same time until

the realme boot animation is displayed to reboot the phone.

How to transfer contents from an old phone to a new phone

You can quickly transfer contents such as photos, videos, music, contacts,

messages, and apps from an old phone to a new phone via realme Clone Phone.

1 Scan the QR code below using the old phone to install "Clone Phone"; on the

new phone, launch "Clone Phone" directly.

Warning:

Do not place the phone or battery near or inside the heating equipments,

cooking equipments, high pressure vessels (such as microwave ovens, induction

cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to

prevent the battery overheating which may lead to an explosion.

The original charger, data cable and battery shall be used. Unapproved

chargers, data cables, or batteries that are not certified by the manufacturer

may result in electric shock, fire, explosion, or other hazards.

2 Follow the prompts on the screen to complete the data transfer.

Standard accessories

You are provided with the following standard accessories:

1 Phone, 1 Charger, 1 USB data cable, 1 Safety Guide, 1 Quick Guide,

1 SIM Ejector Tool, 1 Protective Case.

realme

realme

Front Camera

realme

Volume Key

Power Key

realme

SIM

RMX3081

16.3cm(6.4'')

Radio

Frequency

(V1.0)

Frequency

(V2.0)

Frequency

(V3.0)

Frequency

(V4.0)

Max. Output Power

Radio Waves Specifications

850MHz/900MHz

1800MHz

1900MHz

32.5±1dBm

30±1dBm

29.5±1dBm

GSM

WCDMA

LTE TDD

Bluetooth

2.4G Wi-Fi

5G Wi-Fi

160.6×73.9×8.1(mm)

4400mAh/17.02Wh(Min)

4500mAh/17.41Wh(Typ)

16Megapixels Front

108Megapixels+8Megapixels

+2Megapixels+2Megapixels Rear

Band 1

Band 1

Band 1

Bands 1/2/4

23±1dBm

Bands 5/8

Bands 5/8

Bands 5/8

Bands 5/8

23.3±1dBm

Bands 1/3

Bands 1/3

Bands 1/3

LTE FDD

Bands 5/8 Bands 5/8/20/28 Bands 5/8/20/28

—

Band 7

Band 7

Bands 1/2/3/4

Bands 5/8/12/17/

26/28/66

Band 7

23±1dBm

23.3±1dBm

22.5±1dBm

Bands 38/40/41

Bands 38/41

23±1dBm

＜2.0W/kg(Head)

＜2.0W/kg(Body)

2.4-2.4835GHz

2.4-2.4835GHz

5.15-5.35GHz; 5.47-5.725GHz

5.725-5.85GHz

7±2dBm(EIRP)

15±2dBm(EIRP)

14±2dBm(EIRP)

10.5±2dBm(EIRP)

NFC

—

—

13.56MHZ

—

≤42dBuA/m @10m

32.5±1dBm

30±1dBm

29.5±1dBm

23±1dBm

23.3±1dBm

23±1dBm

23.3±1dBm

22.5±1dBm

23±1dBm

7±2dBm(EIRP)

15±2dBm(EIRP)

14±2dBm(EIRP)

10.5±2dBm(EIRP)

(V4.0)

(V3.0)

(V2.0)

(V1.0)

850MHz/900MHz

1800MHz

1900MHz

Bands 1/2/4

Bands 5/8

Bands 1/2/3/4

Bands 5/8/12/17/

26/28/66

Band 7

Bands 38/41

Bands 1/2/4

Band 1

Band 1

Bands 5/8

Bands 5/8

Bands 5/8

Bands 1/2/3/4

Bands 1/3

Bands 1/3

Bands 5/8/20/28

Bands 5/8/20/28

Bands 5/8

LTE FDD

Band 7

Band 7

—

GSM

WCDMA

LTE TDD

Bluetooth

2.4G Wi-Fi

5G Wi-Fi

Bands 38/40/41

2.4-2.4835GHz

2.4-2.4835GHz

5.15-5.35GHz; 5.47-5.725GHz

5.725-5.85GHz

≤42dBuA/m @10m

—

13.56MHZ

—

—

NFC

RMX3081

6.4

160.6×73.9×8.1

4400mAh/17.02Wh(Min)

4500mAh/17.41Wh(Typ)

8

2

16

108

2

35

0

＜2.0W/kg

＜2.0W/kg

RMX3081

FCC Regulations:

This mobile phone complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) this device must accept any interference received, including interference that

may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiated radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment oÿ and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit diÿerent from that to which

the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

FCC Note:

Caution: Changes or modifications not expressly approved by the party responsible

for compliance could void the user‘s authority to operate the equipment.

RF Exposure Information (SAR)

between this device and your body.RF exposure compliance

This phone is designed and manufactured not to exceed the emission limits for exposure

with any body-worn accessory, which contains metal, was

to radio frequency (RF) energy set by the Federal

not tested and certified, and use such body-worn accessory should be avoided.

5G WIFI statement

The device is restricted to indoor use when operated in 5150MHz~5350MHz

to reduce the potential for interference.

Communications Commission of

the United States.

During SAR testing, this device was set to transmit at

its highest certified power level

in all tested frequency bands, and placed in positions

that simulate RF exposure in

usage against the head with no separation, and near the

body with the separation

of XX mm. Although the SAR is determined at the highest certified power level, the

actual SAR level of the device while operating can be well

below the maximum value.

This is because the phone is designed to operate at multiple power levels so as to

use only the power required to reach the network. In general, the closer you are to a

wireless base station antenna, the lower the power output.

The exposure standard for wireless devices employing a unit

of measurement is known

as the Specific Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6W/kg.

This device is complied with SAR for general population /uncontrolled exposure limits in

ANSI/IEEE C95.1-1992 and had been tested in accordance

For this device, the highest reported SAR value for usage against the head is x.xxx W/kg, for

with the measurement methods

and procedures specified in IEEE1528.

The FCC has granted an Equipment Authorization for this

model phone with all reported

SAR levels evaluated as in compliance with the FCC RF

exposure guidelines. SAR information

on this model phone is on file with the FCC and can be

found under the Display Grant

section of www.fcc.gov/oet/ea/fccid after searching on

FCC ID: 2AUYFRMX3081.

usage near the body is x.xxx W/kg.

While there may be diÿerences between the SAR levels of

various phones and at various

positions, they all meet the government requirements.

SAR compliance for body-worn operation is based on a

separation distance of 10 mm between the unit and the

human body. Carry this device at least 10 mm away from

your body to ensure RF exposure level compliant or lower

to the reported level. To support body-worn operation,

choose the belt clips or holsters, which do not contain

metallic components, to maintain a separation of 10 mm

Device back side TELFONO CELULAR S/N:

IMEI1:

IMEI2:

MODELO: RMX3081 FCC ID: 2AUYFRMX3081 ALIMENTACIN: 7.74Vcc ; 6.5A PRODUCIDO POR REALME ENSAMBLADO EN CHINA Realme Chongqing Mobile Telecommunications Corp., Ltd. TELFONO CELULAR S/N:

IMEI1:

IMEI2:

MODELO: RMX3081 FCC ID: 2AUYFRMX3081 ALIMENTACIN: 7.74Vcc ; 6.5A PRODUCIDO POR REALME ENSAMBLADO EN CHINA Realme Chongqing Mobile Telecommunications Corp., Ltd. 35x25mm 7.3x5.0mm 4.52x7.2mm

Realme Chongqing Mobile Telecommunications Corp., Ltd Agent Authorization Company: Realme Chongqing Mobile Telecommunications Corp., Ltd Address: No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China Product Name: Mobile Phone Model Number(s): RMX3081 Product Description: Mobile phone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2021-03-02 Signature:

Name:

Title:

Yang Liangping Manager Company: Realme Chongqing Mobile Telecommunications Corp., Ltd

Date: Dec. 10, 2019 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The Realme Chongqing Mobile Telecommunications Corp., Ltd., the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the Realme Chongqing Mobile Telecommunications Corp., Ltd. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AUYFRMX3081 including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the Realme Chongqing Mobile Telecommunications Corp., Ltd. The Realme Chongqing Mobile Telecommunications Corp., Ltd. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, Name of the Manager: Yang Liangping Position: Manager Date: Mar. 02, 2021 Signature:

To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: Realme Chongqing Mobile Telecommunications Corp., Ltd FCC ID: 2AUYFRMX3081 FCC Certification Confidentiality Request Gentlemen:

This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Realme Chongqing Mobile Telecommunications Corp., Ltd requests that the following documents regarding this submission for FCC ID: 2AUYFRMX3081 be kept Long-Term confidential:

Exhibit Type Block Diagram Schematics Operational Description Part list Tune-Up-Procedure Software security information And below exhibit kept short-term confidential (180 days):

Exhibit Type External Photos Internal Photos Test Setup Photos Users Manuals File Name Block Diagram.pdf Schematics.pdf Operational Description.pdf BOM.pdf Tune up procedure.pdf Software security information.pdf File Name External Photos.pdf Internal Photos.pdf Test Setup Photos.pdf Users Manual.pdf Those documents contain detailed system and equipment description and related information about the product which Realme Chongqing Mobile Telecommunications Corp., Ltd considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Realme Chongqing Mobile Telecommunications Corp., Ltd considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Thank you for your attention to this matter. Yours Sincerely, Name of the Manager: Yang Liangping Position: Manager Date: Mar. 02, 2021 Signature:

Realme Chongqing Mobile Telecommunications Corp., Ltd FCC Software Configuration Control Declaration Date: March 2, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number:

Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Yang LiangPing Title: Manager Signature of applicant Date: 2021-03-02 FCC Software Configuration Control Declaration Rev1.1