FCC ID: 2AUYFRMX3286 Mobile Phone

Greetings from realme Mobile This guide will show you how to use the phone and its important functions. You may also visit realme official website to get more information about the phone. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with temperature ranging from 5C~35C. Front Camera Volume Key Power Key Back cover cant be removed. How to reboot the phone:

Press and hold the Power Button and Volume Up Button at the same time until the realme boot animation is displayed to reboot the phone. How to transfer contents from an old phone to a new phone You can quickly transfer contents such as photos, videos, music, contacts, messages, and apps from an old phone to a new phone via realme Clone Phone. 1 Scan the QR code below using the old phone to install "Clone Phone"; on the new phone, launch "Clone Phone" directly. Warning:

Do not place the phone or battery near or inside the heating equipments, cooking equipments, high pressure vessels (such as microwave ovens, induction cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to prevent the battery overheating which may lead to an explosion. The original charger, data cable and battery shall be used. Unapproved chargers, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards. 2 Follow the prompts on the screen to complete the data transfer. Standard accessories You are provided with the following standard accessories:

1 Phone, 1 Charger, 1 USB data cable, 1 Safety Guide, 1 Quick Guide, 1 SIM Ejector Tool, 1 Protective Case. RMX3286 16.8cm(6.6'') 164.175.58.5(mm) 4880mAh/18.88Wh(Min) 5000mAh/19.35Wh(Typ) 16Megapixels Front 50Megapixels+2Megapixels

+2Megapixels Rear FCC SAR 1.136W/kg(Head) 0.992W/kg(Body) Radio GSM WCDMA LTE FDD LTE TDD Bluetooth 2.4G Wi-Fi 5G Wi-Fi Frequency

(V1.0) Frequency

(V2.0) Frequency

(V3.0) Max. Output Power Radio Waves Specifications 850MHz/900MHz 1800MHz 1900MHz Band 1 Bands 5/8 Bands 1/3 Band 7 Band 1 Bands 5/8 Bands 1/3 Bands 1/2/4 Bands 5/8 Bands 1/2/3/4/66 Band 7 Band 20 Bands 5/8 Bands 5/8/20/28 Bands 5/8/12/17/26/28 Bands 38/40/41 Bands 38/41 2.4-2.4835GHz 2.4-2.4835GHz 5.15-5.35GHz; 5.47-5.725GHz 5.725-5.85GHz 33.5dBm 31dBm 30.5dBm 24.3dBm 24.5dBm 24dBm 24.5dBm 24.4dBm 25dBm 24dBm 15dBm(EIRP) 21dBm(EIRP) 20dBm(EIRP) 20dBm(EIRP) NFC 13.56MHz 42dBuA/m @10m realme realme realme Front Camera Volume Key Power Key realme SIM 33.5dBm 31dBm 30.5dBm 24.3dBm 24.5dBm 24dBm 24.5dBm 24.4dBm 25dBm 24dBm 15dBm(EIRP) 21dBm(EIRP) 20dBm(EIRP) 20dBm(EIRP)

(V3.0)

(V2.0)

(V1.0) 850MHz/900MHz 1800MHz 1900MHz Bands 1/2/4 Bands 5/8 Bands 1/2/3/4/66 Band 7 Band 20 Band 1 Bands 5/8 Bands 1/3 Band 7 Band 1 Bands 5/8 Bands 1/3 Bands 38/41 Bands 38/40/41 2.4-2.4835GHz 2.4-2.4835GHz 5.15-5.35GHz; 5.47-5.725GHz 5.725-5.85GHz GSM WCDMA LTE TDD Bluetooth 2.4G Wi-Fi 5G Wi-Fi 42dBuA/m @10m 13.56MHz NFC Bands 5/8/12/17/26/28 Bands 5/8/20/28 Bands 5/8 LTE FDD 2 164.175.58.5 4880mAh/18.88Wh(Min) 5000mAh/19.35Wh(Typ) RMX3286 6.6 16 50 2 35 0 1.136W/kg 0.992W/kg FCC SAR Regulatory Steps to search E-label : Go to Settings -About Phone - Certificate Information. FCC Regulations:

FCC Note:

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certied power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 1.5 mm. Although the SAR is determined at the highest certied power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specied in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on le with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AUYFRMX3286 For this device, the highest reported SAR value for usage against the head is 1.136 W/kg, for usage near the body is 0.992 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 15 mm between the unit and the human body. Carry this device at least 15 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 15mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certied, and use such body-worn accessory should be avoided. RMX3286

TELFONO CELULAR S/N: xxxxxxx IMEI1: xxxxxxxxxxxxxxx IMEI2: xxxxxxxxxxxxxxx Modelo: RMX3286 FCC ID: 2AUYFRMX3286 PRODUCIDO POR REALME HECHO EN CHINA Realme Chongqing Mobile Telecommunications Corp., Ltd. 35x25mm LABEL LOCATION

Realme Chongqing Mobile Telecommunications Corp., Ltd. Ad Hoc Mode Declaration Company Name: Realme Chongqing Mobile Telecommunications Corp., Ltd. Address: No.178 Yulong Avenue,Yufengshan,Yubei District,Chongqing,China Declare that:

Date: 2021-11-15 We, the undersigned company Product description: Mobile Phone Type designation: RMX3286 Brand: realme FCC ID: 2AUYFRMX3286 1. The EUT doesnt have Ad Hoc Mode function on non-US frequencies. 802.11a/n Ad Hoc mode should not be supported even on US DFS frequencies (5.25 ~5.35GHz/5.47 ~5.725GHz). 2. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US. The product meets all other requirements specified in Part 15E Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. 3. Only channels 1~11 will be used in USA. Country code selection is disabled. If you have any questions regarding the authorization, please do not hesitate to contact us, thank you~

Sincerely, Signature: ________________________ Name: LiangPing Yang 86 76986076999 Tel:

Email: ylp@realme.com

FCC, Request for non-disclosure RF_501, Issue 8 Date: 21-Nov-2018 Page 1 of 1 Company Name:

Realme Chongqing Mobile Telecommunications Corp., Ltd. Address:No.178 Yulong Avenue,Yufengshan,Yubei District, City:

Country:

Chongqing China Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To: Telefication B.V., Dept. FCC TCB Subject: Request for confidentiality FCC ID: 2AUYFRMX3286 Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):

Internal Photos Users Manual Test Set-up Photos External Photos Justification:

Name and signature of applicant: LiangPing Yang manager Date: 2022-1-10 Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should stated in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period

RF_160, Issue 02 Realme Chongqing Mobile Telecommunications Corp., Ltd. Declaration of Authorization Realme Chongqing Mobile Telecommunications Corp., Ltd. We Name:

Address: No.178 Yulong Avenue,Yufengshan,Yubei District, City: Chongqing Country: China Declare that:

Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):

Product description: Mobile Phone Type designation: RMX3286 Trademark: realme FCC ID : 2AUYFRMX3286 on our behalf. Date:

2021-11-15 City:

Chongqing Name:

LiangPing Yang Function: manager Signature:

Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent.