FCC ID: 2AUYFRMX3516 Mobile Phone

Greetings from realme Mobile This guide will show you how to use the phone and its important functions. You may also visit realme official website to get more information about the phone. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with temperature ranging from 5C~35C. Receiver Front Camera Volume Key Power Key Back cover cant be removed. How to reboot the phone:

Press and hold the Power Button and Volume Up Button at the same time until the realme boot animation is displayed to reboot the phone. How to transfer contents from an old phone to a new phone You can quickly transfer contents such as photos, videos, music, contacts, messages, and apps from an old phone to a new phone via realme Clone Phone. 1 Scan the QR code below using the old phone to install "Clone Phone"; on the new phone, launch "Clone Phone" directly. Warning:

Do not place the phone or battery near or inside the heating equipments, cooking equipments, high pressure vessels (such as microwave ovens, induction cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to prevent the battery overheating which may lead to an explosion. The original charger, data cable and battery shall be used. Unapproved chargers, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards. 2 Follow the prompts on the screen to complete the data transfer. Standard accessories You are provided with the following standard accessories:

1 Phone, 1 USB data cable, 1 Safety Guide, 1 Quick Guide, 1 SIM Ejector Tool. RMX3516/RMX3517 16.7cm(6.6'') 164.475.68.1(mm) 4890mAh/18.92Wh(Min) 5000mAh/19.35Wh(Typ) 8Megapixels Front 50Megapixels+2Megapixels

+0.3Megapixels Rear FCC SAR 1.18W/kg(Head) 1.19W/kg(Body) Radio GSM WCDMA LTE FDD LTE TDD Bluetooth 2.4G Wi-Fi 5G Wi-Fi Radio Waves Specifications Frequency

(V1.0) Frequency

(V2.0) Max. Output Power 850MHz/900MHz 1800MHz 1900MHz Band 1 Bands 5/8 Bands 1/3 Bands 1/2/4 Bands 5/8 Bands 1/2/3/4/66 Bands 5/8/28 Bands 5/8/12/17/26/28 Band 7 Band 20 Band 7 Bands 38/40/41 Bands 38/41 2.4-2.4835GHz 2.4-2.4835GHz 5.15-5.35GHz; 5.47-5.725GHz 5.725-5.85GHz 33.5dBm 31dBm 30.5dBm 24.5dBm 24.5dBm 24dBm 24.5dBm 24dBm 25dBm 24dBm 14dBm(EIRP) 21.5dBm(EIRP) 21.5dBm(EIRP) 21dBm(EIRP) realme realme SIM realme realme Front Camera Volume Key Power Key 33.5dBm 31dBm 30.5dBm 24.5dBm 24.5dBm 24dBm 24.5dBm 24dBm 25dBm 24dBm 14dBm(EIRP) 21.5dBm(EIRP) 21.5dBm(EIRP) 21dBm(EIRP)

(V2.0)

(V1.0) 850MHz/900MHz 1800MHz 1900MHz Bands 1/2/4 Bands 5/8 Bands 1/2/3/4/66 Band 1 Bands 5/8 Bands 1/3 Bands 5/8/12/17/26/28 Bands 5/8/28 Band 7 Band 7 Band 20 RMX3516/RMX3517 6.6 164.475.68.1 4890mAh/18.92Wh(Min) 5000mAh/19.35Wh(Typ) GSM WCDMA LTE FDD 2 8 50 0.3 35 0 Bands 38/41 Bands 38/40/41 LTE TDD 2.4-2.4835GHz 2.4-2.4835GHz 5.15-5.35GHz; 5.47-5.725GHz 5.725-5.85GHz Bluetooth 2.4G Wi-Fi 5G Wi-Fi 1.18W/kg(Head) 1.19W/kg(Body) FCC SAR FCC Regulations:

FCC Note:

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certied power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 1.5 mm. Although the SAR is determined at the highest certied power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specied in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on le with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AUYFRMX3516 For this device, the highest reported SAR value for usage against the head is 1.18 W/kg, for usage near the body is 1.19 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 1.5c m between the unit and the human body. Carry this device at least XX mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 1.5 cm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certied, and use such body-worn accessory should be avoided. Regulatory Steps to search E-label : Go to Settings -About Phone - Certificate Information. RMX3516 RMX3517

FCC Regulatory Conformance RF Exposure Information (SAR) This device complies with RF specifications when used near your ear or at a distance of 1.5cm from your body. Ensure that the use of belt clips, holsters and similar accessories should not contain metallic components. Keep the device away from your body to meet the distance requirement. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The antenna(s) used for this transmitter must not be collocated or operate in conjunction with any other antenna or transmitter. The SAR limit set by the FCC is 1.6W/kg. The highest SAR value of this device type complies with this limit. FCC SAR(RMX3516):

Head: 1.18W/kg Body: 1.19W/kg FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference; and

(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Conformidad con la FCC Declaracin de la FCC Este dispositivo cumple la seccin 15 de la normativa de la FCC. Su funcionamiento est sujeto a las dos condiciones siguientes:

(1) Este dispositivo no puede provocar interferencias perjudiciales; y

(2) Este dispositivo debe aceptar cualquier interferencia recibida, incluidas las interferencias que puedan provocar un funcionamiento indeseado. En este equipamiento se ha probado el cumplimiento de los lmites para un dispositivo digital Clase B conforme a la seccin 15 de la normativa de la FCC. Estos lmites se han diseado para proporcionar una proteccin razonable frente a interferencias parciales o perjudiciales en una instalacin residencial. Este equipamiento genera, emplea y puede irradiar energa de radiofrecuencia y, si no se instala y utiliza segn las instrucciones, puede provocar interferencias perjudiciales en las comunicaciones por radio. No obstante, no existen garantas de que no se puedan producir interferencias en una instalacin particular. Si este equipamiento provoca interferencias perjudiciales en la recepcin de radio o televisin, lo cual se puede determinar apagando y encendiendo el equipamiento, recomendamos al usuario que intente corregir la interferencia mediante una o varias de las siguientes medidas:

- Reorientando o recolocando la antena receptora.

- Aumentando la separacin entre el equipamiento y el receptor.

- Conectando el equipamiento a una toma o un circuito distinto a aquel al que est conectado el receptor.

- Pidiendo ayuda al distribuidor o a un tcnico de radio/TV experimentado. Precaucin:

Todo cambio o modificacin no aprobado expresamente por la parte responsable del cumplimiento puede anular la autoridad del usuario para manejar el equipamiento. Informacin de exposicin a RF (SAR) Este dispositivo cumple las especificaciones de RF cuando se utiliza cerca del odo o a una distancia de 1,5 cm del cuerpo. Si se utilizan pinzas para el cinturn, fundas y accesorios similares, no deben contener componentes metlicos. Aleja el dispositivo del cuerpo lo suficiente como para cumplir el requisito de seguridad. Este dispositivo se ha diseado y fabricado para no superar los lmites de emisin para la exposicin a radiofrecuencia (RF) establecidos por la Comisin Federal de Comunicaciones del gobierno de Estados Unidos. La(s) antena(s) utilizadas para este transmisor no debe(n) colocarse ni funcionar en combinacin con ningn otro transmisor o antena. El lmite de SAR establecido por la FCC es de 1,6 W/kg. El mximo valor de SAR de este tipo de dispositivo cumple este lmite. FCC SAR(RMX3516):

Cabeza: 1,18W/kg Cuerpo: 1.19W/kg 5212664 V0.1 Safety Guide

Label Label location (Back side) Mobile Phone S/N: xxxxxxxx IMEI1: xxxxxxxxxxxxxxxx IMEI2: xxxxxxxxxxxxxxxx Model: RMX3516 FCC ID: 2AUYFRMX3516 Designed by realme Made in China Realme Chongqing Mobile Telecommunications Corp., Ltd. printed adhesive label 35x25mm Mobile Phone S/N: xxxxxxxx IMEI1: xxxxxxxxxxxxxxxx IMEI2: xxxxxxxxxxxxxxxx Model: RMX3516 FCC ID: 2AUYFRMX3516 Designed by realme Made in China Realme Chongqing Mobile Telecommunications Corp., Ltd.

To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: Realme Chongqing Mobile Telecommunications Corp., Ltd FCC ID: 2AUYFRMX3516 FCC Certification Confidentiality Request Gentlemen:

This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Realme Chongqing Mobile Telecommunications Corp., Ltd requests that the following documents regarding this submission for FCC ID: 2AUYFRMX3516 be kept Long-Term confidential:

Exhibit Type Block Diagram Schematics Operational Description Part list Tune-Up-Procedure And below exhibit kept short-term confidential (180 days):

Exhibit Type External Photos Internal Photos Test Setup Photos Users Manuals File Name Block Diagram.pdf Schematics.pdf Operational Description.pdf BOM.pdf Tune up procedure.pdf File Name External Photos.pdf Internal Photos.pdf Test Setup Photos.pdf Users Manual.pdf Those documents contain detailed system and equipment description and related information about the product which Realme Chongqing Mobile Telecommunications Corp., Ltd considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Realme Chongqing Mobile Telecommunications Corp., Ltd considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Thank you for your attention to this matter. Yours Sincerely, Name of the Manager: Yang Liangping Position: Manager Date: 2022 02 14 Signature:

RealMe Realme Chongqing Mobile Telecommunications Corp., Ltd. 24 2 No.2 Building, No.24 Nichang Boulevard, Huixing Block, Yubei District, Chongqing, China

Realme Chongqing Mobile Telecommunications Corp., Ltd. Date: 2022/02/14 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The Realme Chongqing Mobile Telecommunications Corp., Ltd. the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the Realme Chongqing Mobile Telecommunications Corp., Ltd. solely in matters relating to the application for an FCC equipment authorization for FCC ID:

2AUYFRMX3516 including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the Realme Chongqing Mobile Telecommunications Corp., Ltd. The Realme Chongqing Mobile Telecommunications Corp., Ltd. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, Print name: Yang LiangPing Title: Manager Realme Chongqing Mobile Telecommunications Corp., Ltd.