FCC ID: 2AUYFRMX3624 Mobile Phone with GSM, WCDMA, LTE, NFC, WiFi and Bluetooth

realme Receiver Front Camera Proximity sensor & Light sensor Volume Key Power Key / Fingerprint Scanner realme realme realme realme

33.5dBm 33.5dBm 30.5dBm 30.5dBm 24.5dBm 24dBm 24dBm 23.5dBm 24.5dBm 24dBm 12.5dBm(EIRP) 21dBm(EIRP) 42dBA/m @10m RMX3624 16.5cm(6.5'') 164.275.78.3(mm) 4890mAh/18.92Wh(Min) 5000mAh/19.35Wh(Typ) 50 Megapixels +

0.3 Megapixels Rear 5 Megapixels Front FCC SAR 0.793W/kg(Head) 0.755W/kg(Body) 850MHz 900MHz 1800MHz 1900MHz Bands 1/5/8 Bands 2/4 E n g l i s h Max. Output Power 33.5dBm 33.5dBm 30.5dBm 30.5dBm 24.5dBm 24dBm 24dBm 23.5dBm 24.5dBm 24dBm 12.5dBm(EIRP) 21dBm(EIRP) 42dBA/m @10m Radio Waves Specications Radio GSM WCDMA Frequency 850MHz 900MHz 1800MHz 1900MHz Bands 1/5/8 Bands 2/4 Bands 1/2/3/4/66 LTE FDD Band 7 LTE TDD Bluetooth 2.4G Wi-Fi NFC Bands 5/8/13/20/28 Bands 38/41 2.4-2.4835GHz 2.4-2.4835GHz 13.56MHz RMX3624 GSM

6.5) 16.5 WCDMA Bands 1/2/3/4/66 Band 7 LTE FDD Bands 5/8/13/20/28 Bands 38/41 2.4-2.4835GHz 2.4-2.4835GHz 13.56MHz LTE TDD Bluetooth 2.4G Wi-Fi NFC 164.275.78.3 4890mAh/18.92Wh(Min) 5000mAh/19.35Wh(Typ) 0.3 50 5 X.XXW/kg X.XXW/kg FCC SAR Regulatory Steps to search E-label : Go to Settings -About Phone - Certificate Information. FCC Regulations:

FCC Note:

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certied power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 1.5 cm. Although the SAR is determined at the highest certied power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specied in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on le with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AUYFRMX3624 For this device, the highest reported SAR value for usage against the head is XXX W/kg, for usage near the body is XXX W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of XX mm between the unit and the human body. Carry this device at least XX mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of XX mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certied, and use such body-worn accessory should be avoided. RMX3624

Mobile Phone S/N: xxxxxxxx IMEI1: xxxxxxxxxxxxxxxx IMEI2: xxxxxxxxxxxxxxxx Model: RMX3624 FCC ID: 2AUYFRMX3624 Designed by realme Assembled in China Realme Chongqing Mobile Telecommunications Corp., Ltd.

Realme Chongqing Mobile Telecommunications Corp., Ltd Date: 22 July 2022 PHOENIX TESTLAB GmbH Product Certification Knigswinkel 10 D 32825 Blomberg RE : LETTER OF AGENCY AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Zhou Fangai at Shenzhen Academy of Metrology and Quality Inspection to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C.862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. This agreement is valid for one year until 19-07-2023 If you have any questions, please feel free to contact me Yours sincerely, Signatory Printed NameYang Liangping PositionCompliance Manager

Realme Chongqing Mobile Telecommunications Corp., Ltd Long/Short-term Confidentiality Request Date: 22 July 2022 PHOENIX TESTLAB GmbH Product Certification Knigswinkel 10 D 32825 Blomberg FCC ID: 2AUYFRMX3624 To Whom It May Concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby request long-term confidential treatment of information accompanying this application as outlined below:

Schematics Block Diagram Operational Description In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentiality) withheld from the public disclosure for an initial period of 180 days applicable External Photos Internal Photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, Signatory Printed NameYang Liangping PositionCompliance Manager Parts List Tune-Up Info Test Setup Photos Users Manual until:

not