FCC ID: 2AUYFRMX3501 Mobile Phone with GSM, WCDMA, LTE, WiFi and Bluetooth

Greetings from realme Mobile This guide will show you how to use the phone and its important functions. You may also visit realme official website to get more information about the phone. When charging, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with temperature ranging from 5C~35C. Receiver Front Camera Volume Key Power Key Back cover cant be removed. How to reboot the phone:

Press and hold the Power Button and Volume Up Button at the same time until the realme boot animation is displayed to reboot the phone. How to transfer contents from an old phone to a new phone You can quickly transfer contents such as photos, videos, music, contacts, messages, and apps from an old phone to a new phone via realme Clone Phone. 1 Scan the QR code below using the old phone to install "Clone Phone"; on the new phone, launch "Clone Phone" directly. Warning:

Do not place the phone or battery near or inside the heating equipments, cooking equipments, high pressure vessels (such as microwave ovens, induction cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to prevent the battery overheating which may lead to an explosion. The original charger, data cable and battery shall be used. Unapproved chargers, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards. 2 Follow the prompts on the screen to complete the data transfer. Standard accessories You are provided with the following standard accessories:

1 Phone, 1 Charger, 1 USB data cable, 1 Safety Guide, 1 Quick Guide, 1 SIM Ejector Tool. RMX3501 16.6cm(6.5'') 164.7x76.2x8.4(mm) 4890mAh/18.92Wh(Min) 5000mAh/19.35Wh(Typ) 5Megapixels Front 13Megapixels+2Megapixels

+0.3Megapixels Rear 2.0W/kg(Head) 2.0W/kg(Body) Radio GSM WCDMA LTE FDD LTE TDD Bluetooth 2.4G Wi-Fi Radio Waves Specifications Frequency

(V1.0) Frequency

(V2.0) Max. Output Power 850MHz/900MHz 1800MHz 1900MHz Band 1 Bands 5/8 Bands 1/3 Band 7 Band 20 Bands 1/2/4 Bands 5/8 Bands 1/2/3/4/66 Band 7 Bands 5/8/28 Bands 5/8/12/17/26/28 33.5dBm 31dBm 30.5dBm 24.5dBm 24.5dBm 24dBm 24.5dBm 24dBm 25dBm 24dBm Bands 38/40/41 Bands 38/41 2.4-2.4835GHz 2.4-2.4835GHz 12dBm(EIRP) 20dBm(EIRP) realme realme Front Camera Volume Key Power Key realme realme SIM 33.5dBm 31dBm 30.5dBm 24.5dBm 24.5dBm 24dBm 24.5dBm 24dBm 25dBm 24dBm 12dBm(EIRP) 20dBm(EIRP)

(V2.0)

(V1.0) 850MHz/900MHz 1800MHz 1900MHz Bands 1/2/4 Bands 5/8 Bands 1/2/3/4/66 Band 7 Band 1 Bands 5/8 Bands 1/3 Band 7 Band 20 Bands 5/8/12/17/26/28 Bands 5/8/28 GSM WCDMA LTE FDD Bands 38/41 Bands 38/40/41 LTE TDD 2.4-2.4835GHz 2.4-2.4835GHz Bluetooth 2.4G Wi-Fi RMX3501 6.5 164.7x76.2x8.4 4890mAh/18.92Wh(Min) 5000mAh/19.35Wh(Typ) 2 5 13 0.3 35 0 2.0W/kg 2.0W/kg Regulatory Steps to search E-label : Go to Settings -About Phone - Certificate Information. FCC Regulations:

FCC Note:

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. RF Exposure Information (SAR) This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certied power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 1.5 mm. Although the SAR is determined at the highest certied power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specied in IEEE1528. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on le with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AUYFRMXXXXX For this device, the highest reported SAR value for usage against the head is XXX W/kg, for usage near the body is XXX W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of XX mm between the unit and the human body. Carry this device at least XX mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of XX mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certied, and use such body-worn accessory should be avoided. RMX3501

realme TELEFONO CELULAR Modelo: RMX3501 S/N: E42C6915 FCC ID: 2AUYFRMX3501 IMEI1: 866457060019987 IMEI2: 866457060019927 PRODUCIDO POR REALME ENSAMBLADO EN CHINA Realme Chongqing Mobile Telecommunications Corp., Ltd.

Realme Chongqing Mobile Telecommunications Corp., Ltd. Date: 2022-01-20 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

Zhan authorizes Miss. Wendy The Realme Chongqing Mobile Telecommunications Corp., Ltd., the undersigned, from Shenzhen Morlab hereby Communications Technology Co., Ltd., to act on the behalf of the Realme Chongqing Mobile Telecommunications Corp., Ltd. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AUYFRMX3501 including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Realme Chongqing Mobile Telecommunications Corp., Ltd. in connection with the Application shall have the same effect as acts of the Realme Chongqing Mobile Telecommunications Corp., Ltd.. Realme Chongqing Mobile Telecommunications Corp., Ltd. also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory:

Contact name:Liangping Yang Title:Certification Manager Tel:86 76986076999 Email:ylp@realme.com Company name: Realme Chongqing Mobile Telecommunications Corp., Ltd.

Realme Chongqing Mobile Telecommunications Corp., Ltd. Date:2022-01-20 To:

Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AUYFRMX3501 To Whom it may concern:

Pursuant to sections 0.457 and 0.459 of Commissions Rules(CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Realme Chongqing Mobile Telecommunications Corp., Ltd. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA04-1705. This provision will give Realme Chongqing Mobile Telecommunications Corp., Ltd. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows:

PERMANENT AND SHORT-TERM CONFIDENTIAL LIST PERMANENT SHORT-TERM Exhibit 1 2 3 4 5 6 7 8 9 Description Block Diagram Operational Description Schematics BOM Tune up procedure External Photos Internal Photos Test-Setup Photos User Manual to Rule 0.457, disclosure of The Applicant understands that pursuant this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory:

Name:Liangping Yang Company name:Realme Chongqing Mobile Telecommunications Corp., Ltd. Address:No.178 Yulong Avenue, Yufengshan, Yubei District, Chongqing, China Tel: 86 76986076999 Email: ylp@realme.com

Declaration To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AUYFRMX3501 Don't operate on Channels 12 and 13. US 2.4G channel 12-13 and Country code selection are disabled through proprietary software and are not user changeable Should you have any questions, please feel free to contact me. Signature :

Date:2022/01/20 Contact name:Liangping Yang Title: Certification Manager Company name: Realme Chongqing Mobile Telecommunications Corp., Ltd.