FCC ID: 2AUYFRMA2006 realme Watch 2 Pro

 

LS450-R（ RM A2006） USER M ANUAL 20210116A3

USER MANUAL

1. Ovreview

As a long-lasting and ultra-light & thin intelligent sports watch, the new realme

Watch 2 Pro Smart Watch(hereinafter referred to as“the Watch”) integrates

functions of blood oxygen measurement, continuous heart rate monitoring,

sleep monitoring, sports monitor with GPS, information assistant and intelligent

tool, etc. With the ultra-light & thin and fashionable design, the Watch guides

you health accurately, which is a suitable wear both in daily leisure activities and

light sports.

Using a color display with a sort and skin-friendly silicone watch strap, the

Watch will give you a comfortable feeling.

As long as the Watch is worn on your wrist and matched and connected with

you mobile phone, you can experience intimate services of scientific sports,

heart rate monitoring, sleep monitoring instant notification, etc.

-24-hour dynamic heart rate monitoring

Performance

-Low-power Bluetooth

-Full-screen touch

-TFT color display

-Blood oxygen measurement

-GPS

-Multiple modes of sports

-Sleep monitoring

-Meditation mode

-Message notification

-Music control

2. QuickStart

1) Unboxing

In the box:

Unboxing your realme Watch 2 Pro and check if accessories are complete.

A. A realme Watch 2 Pro (Built-in Polymer Lithium Battery)

B. A User Manual

C. A Charging Base

2) Pairing

A． Download “realme Link” APP from Google Play. Sign up your realme account

and input your basic information ( Birth date / Height / Weight / Gender etc.

B． Long press “power button” for 3 seconds or connect charger to activate

realme Watch 2 Pro.

C． Choose language for your realme Watch 2 Pro.

D． Make sure Bluetooth of your mobile device is on, open the “realme Link” APP,

scan the device QR code displayed on realme Watch 2 Pro. Or open “realme

Link” APP, select realme Watch 2 Pro to scan device nearby, choose and

connect to the intended realme Watch 2 Pro. Click confirm to pair realme

Watch 2 Pro.

A. "Binding Success" will be displayed if the binding process is done;

B. "Binding Failure" will be displayed if the binding process is failed. Please try

again until binding is done to make sure the realme Watch 2 Pro is able to work

properly.

3) W ear

data normally.

Wear the watch about one finger away from the carpal bone, and adjust the

tightness of the watch strap to ensure that the heart rate sensor can collect

4) Display Control

The watch adopts a 1.75-inch TFT color display with 320*385 pixel, which

supports full-screen touch, sliding upward, down, left and right, point touch and

long press operation.

Slide downwards on the dial interface, the message notification list will be

opened, and operate in the reverse direction to return;

Slide upwards on the dial interface, the function list will be opened, and

operate in the reverse direction to return;

Slide rightwards on the dial interface, the shortcut settings list will be opened,

and operate in the reverse direction to return;

Slide leftwards on the dial interface to switch to other primary interfaces, and

slide left or right to switch the primary interfaces;

Slide to the right on the non-dial interface, the Watch will return to the

Long press the dial interface, the Watch will enter the dial switching interface.

previous interface;

5) Button Control

1 Power button

! When the display is off, short press it to brighten the display

In the dial interface, short press it to display off

In the non-watch face, short press it to return to previous interface

! During your exercise, short press it to pause/resume the exercise

In the dail interface, long press it to enter the restart/power-off interface

In any mode, long press it for more than 10 seconds to force restart

!

!

!

!

!

!

!

!

!

!

6) Low Battery

A. When the power of the Watch is equal or less than 10%, the single vibration

pop-up window will display:

B. When the power of the Watch is equal or less than 5%, the single vibration

pop-up window will display:

C. When the power of the Watch is equal or less than 3%, the single vibration

pop-up window will display and the Watch will power off.

7) Charging

A. Place the Watch on the charging base, so that the charging contact piece on

the back of the Watch is completely attached to the metal contact on the

B. Connect the charging base to the standard USB charger with the output

voltage of 5V and output current of 0.5A and above, which must be purchased

charging base;

for formal channels.

Tips:

!

!

If the Wach connot be turned on after being placed for a long time, it needs to

be pre-charged for about 1 minute before the charging icon is displayed.

Please clean the charging contact piece of the Watch before charging to

avoid sweat or moisture residue.

3. Health features

1） realme Watch 2 Pro will help tracking activity data and health status 24/7. It is

designed to monitor daily activities: steps / distance / consumed calories and

continuous heart rate.

2） Input and sync up your information of height, weight, step goal etc. from

“realme Link” APP. realme Watch 2 Pro can assist you on achieving daily step

goal, you can modify step goal according to your physical condition on

“realme Link” APP.

3） realme Watch 2 Pro provides you multiply exercise modes. Go to Workout and

choose your personal workout mode with accurate exercise data recorded.

4） realme Watch 2 Pro provides SpO2 measurement and you can find the

estimated value in the report.SpO2 is the concentration of oxygen in the blood.

The human body requires and regulates a very precise and specific balance of

oxygen in the blood. Normal blood oxygen levels in humans are considered

95-100%. If the level is below 90%, it is considered low resulting in hypoxemia.

Blood oxygen levels below 80% may compromise organ function, such as the

brain and heart, and should be promptly addressed.

4． Specifications

Product Name: realme Watch 2 Pro

Product Model: RMA2006

Display: 1.75 inch TFT color display

Resolution Ratio: 320*385

Battery Capacity: 390mAh

Protection Level: IP68

Working Temperature: 0℃~40℃

Storage Temperature: -20℃~ 60℃

Matched Mobile Phone: Android 5.0 and above/iOS 9.0 and above

5． Warnings

AUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS:

! Do not disposal of a battery into fire or a hot oven, or mechanically crushing or

cutting of a battery, that can result in an explosion.

! Do not leaving a battery in an extremely high temperature surrounding

environment that can result in an explosion or the leakage of flammable liquid

or gas.

! Do not expose the battery to extremely low air pressure that may result in an

explosion or the leakage of flammable liquid or gas.

6． FCC statement

BT BLE: 2402MHz-2480MHz @ -0.81dBm

GPS: 1561-1575.42 MHz

Manufacturer name: Realme Chongqing Mobile Telecommunications Corp., Ltd.

Manufacturer address: No.178 Yulong Avenue, Yufengshan, Yubei District,

Chongqing, China.

Caution: The user is cautioned that changes or modifications not expressly

approved by the party responsible for compliance could void the user's authority

to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

This transmitter must not be co-located or operating in conjunction with any other.



 

 

 

 

 

 

 

 

 

 

 

 

 

 

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name Address Grantee Code FCC ID Contact Email Contact Phone Authorized Contact Name Realme Chongqing Mobile Telecommunications Corp., Ltd. No.178 Yulong Avenue, Yufengshan Yubei District, Chongqing, China 2AUYF 2AUYFRMA2006 LiangPing Yang ylp@realme.com 86 76986076999 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare;

a) b) c) d) e) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

labeling the equipment with the exact FCC ID as specified in this application,

(1)

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1)

(2)

(3) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. the Applicant shall, upon request by SGS, at the Applicants expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Print Name: LiangPing Yang Title: Manager Date:12/17/2020

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

 

 

Realme Chongqing Mobile Telecommunications Corp., Ltd. TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Date: 12/17/2020 Regarding: FCC ID: 2AUYFRMA2006 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Kobe Jian in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Realme Chongqing Mobile Telecommunications Corp., Ltd.. This authorization is valid until further written notice from the applicant. Title: Manager Name (Printed): LiangPing Yang Signature:

On behalf of Company: Realme Chongqing Mobile Telecommunications Corp., Ltd.

 

 

Realme Chongqing Mobile Telecommunications Corp., Ltd. To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Realme Chongqing Mobile Telecommunications Corp., Ltd. No.178 Yulong Avenue, Yufengshan Yubei District Chongqing, China Regarding:

Confidentiality Request regarding application for FCC ID: 2AUYFRMA2006 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. If the device is marketed within 180 days of Schematic(s) Block Diagrams Operational Descriptions External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Signature:

Name (Printed): LiangPing Yang Title: Manager On behalf of Company: Realme Chongqing Mobile Telecommunications Corp., Ltd.