FCC ID: TX2-RTL8821CE 802.11 a/b/g/n/ac RTL8821CE Combo module

by: Realtek Semiconductor Corp. latest update: 2023-02-21 model: RTL8821CE

One Hundred And Twenty Three grants have been issued under this FCC ID from 12/12/2016 to 02/21/2023 (this is one of one hundred and sixty-one releases in 2023 for this grantee). Public details available include manuals, frequency information, and internal & external photos. some products also feature user submitted or linked troubleshooting guides, drivers, instructions, password defaults, & warrantee terms.
permalink for this FCC identifier
search for: Repair details
from iFixIt
Replacement
on Amazon
Trade-in? Recycling locations
eg is reader-supported. when you buy through links on our site, we may earn an affiliate commission.
|
|
|   
eg for Slack usage
app s submitted / available
various E18882 E1600WKA UM draft10 Users Manual pdf 4.56 MiB April 07 2022 / October 05 2022 delayed release
various E20075 E1600WKA QSG V2 draft2 Users Manual pdf 1.82 MiB April 07 2022 / October 05 2022 delayed release
various RTL8821CE- User Manual Users Manual pdf 1.16 MiB December 12 2021 / December 13 2021
various RTL8821CE- UserMan Part1 Users Manual pdf 4.81 MiB December 27 2020 / June 26 2021 delayed release
various RTL8821CE- UserMan Part2 Users Manual pdf 3.19 MiB December 27 2020 / June 26 2021 delayed release
various User Manual Users Manual pdf 2.11 MiB July 08 2022 / October 09 2022 delayed release
various User Manual-1 Users Manual pdf 1.15 MiB November 05 2021 / May 05 2022 delayed release
various User Manual-2 Users Manual pdf 1.32 MiB November 05 2021 / May 05 2022 delayed release
various User Manual Users Manual pdf 3.06 MiB February 21 2023 / August 21 2023 delayed release
various 21-2124 EUT Internal Photos FCC IC Internal Photos pdf 1.89 MiB April 07 2022 / October 05 2022 delayed release
various Internal Photos Internal Photos pdf 2.13 MiB July 08 2022 / October 09 2022 delayed release
various Internal Photographs Internal Photos pdf 4.89 MiB February 21 2023 / August 21 2023 delayed release
various Internal Photos pdf July 06 2022 / July 07 2022
various RTL8821CE- IntPho Internal Photos pdf 2.23 MiB December 09 2021
various TempConfidential RTL8821CE- Inpho SAR Internal Photos pdf 3.59 MiB December 27 2020 / June 26 2021 delayed release
various 21-2124 EUT External Photos FCC IC External Photos pdf 1.15 MiB April 07 2022 / October 05 2022 delayed release
various External Photos External Photos pdf 1.19 MiB July 08 2022 / October 09 2022 delayed release
various External Photographs External Photos pdf 966.19 KiB February 21 2023 / August 21 2023 delayed release
various RTL8821CE- Expho External Photos pdf 1.24 MiB December 12 2021 / December 13 2021
various RTL8821CE- ExtPho External Photos pdf 676.34 KiB December 09 2021
various TempConfidential RTL8821CE- Expho SAR External Photos pdf 538.48 KiB December 27 2020 / June 26 2021 delayed release
various ID Label and Location ID Label/Location Info pdf 659.08 KiB November 05 2021
various Label Info E1600WK 21-2124 ID Label/Location Info pdf 114.41 KiB April 07 2022 / April 08 2022
various ID Label/Location Info pdf July 08 2022 / July 11 2022
various ID Label/Location Info pdf July 08 2022 / July 11 2022
various RTL8821CE- ISED Label ID Label/Location Info pdf 314.29 KiB December 27 2020 / December 28 2020
various RTL8821CE- Inpho ID Label/Location Info pdf 5.09 MiB December 12 2021 / December 13 2021
various RTL8821CE- Label and Location ID Label/Location Info pdf 3.09 MiB December 12 2021 / December 13 2021
various ID Label/Location Info pdf February 21 2023
various ID Label/Location Info pdf February 21 2023
various ID Label/Location Info pdf February 21 2023
various Attestation Statements pdf February 21 2023
various Attestation Statements pdf February 21 2023
various Block Diagram Block Diagram pdf February 21 2023 confidential
various Cover Letter(s) pdf February 21 2023
various Cover Letter(s) pdf February 21 2023
various Cover Letter(s) pdf February 21 2023
various Operational Description Operational Description pdf February 21 2023 confidential
various Cover Letter(s) pdf February 21 2023
various Test Report pdf February 21 2023
various Test Report pdf February 21 2023
various Test Report pdf February 21 2023
various Test Report pdf February 21 2023
various RF Exposure Info pdf February 21 2023
various Schematics Schematics pdf February 21 2023 confidential
various TsUp SAR Test Setup Photos pdf 1.44 MiB February 21 2023 / August 21 2023 delayed release
various Block Diagram Block Diagram pdf July 08 2022 confidential
various Cover Letter(s) pdf July 08 2022 / July 11 2022
various Cover Letter(s) pdf July 08 2022 / July 11 2022
various Cover Letter(s) pdf July 08 2022 / July 11 2022
various Schematics Part1 Schematics pdf July 08 2022 confidential
various Schematics Part2 Schematics pdf July 08 2022 confidential
various RF Exposure Info pdf July 08 2022 / July 11 2022
various RF Exposure Info pdf July 08 2022 / July 11 2022
various Test Setup Photos SAR Test Setup Photos pdf 135.55 KiB July 08 2022 / October 09 2022 delayed release
various SW Security Op Description SDR Software/Security Inf pdf July 08 2022 confidential
various Cover Letter(s) pdf July 07 2022 / July 08 2022
various RF Exposure Info pdf July 07 2022 / July 08 2022
various RF Exposure Info pdf July 07 2022 / July 08 2022
various Test Setup Photos Test Setup Photos pdf 1.35 MiB July 07 2022 / October 06 2022 delayed release
various Cover Letter(s) pdf July 07 2022 / July 08 2022
various Software Security Operational Desc SDR Software/Security Inf pdf July 07 2022 confidential
various RF Exposure Info pdf July 06 2022 / July 07 2022
various RF Exposure Info pdf July 06 2022 / July 07 2022
various TSUP SAR Test Setup Photos pdf 128.17 KiB July 06 2022 / October 04 2022 delayed release
various Schematic Part1 Schematics pdf July 06 2022 confidential
various Schematic Part2 Schematics pdf July 06 2022 confidential
various 2202FS17 FCC SAR 21-2124 RF Exposure Info pdf 1.65 MiB April 07 2022 / April 08 2022
various Appendix A Conducted Power Measurements RF Exposure Info pdf 856.67 KiB April 07 2022 / April 08 2022
various Appendix B System Performance Check Plots RF Exposure Info pdf 259.52 KiB April 07 2022 / April 08 2022
various Appendix C Highest Measurement Plots RF Exposure Info pdf 413.49 KiB April 07 2022 / April 08 2022
various Appendix D Calibration Certificates RF Exposure Info pdf 2.47 MiB April 07 2022 / April 08 2022
various Appendix E Test Setup Photographs SAR Test Setup Photos pdf 401.76 KiB April 07 2022 / October 05 2022 delayed release
various C2PC letter OK Cover Letter(s) pdf 436.30 KiB April 07 2022 / April 08 2022
various Confidentiality Request OK Cover Letter(s) pdf 475.82 KiB April 07 2022 / April 08 2022
various FCC agent authorization OK Cover Letter(s) pdf 567.29 KiB April 07 2022 / April 08 2022
various Confidential RTL8821CE- Block Diagram Block Diagram pdf December 12 2021 confidential
various Confidential RTL8821CE- OPDes Operational Description pdf December 12 2021 confidential
various Confidential RTL8821CE- Schematics Schematics pdf December 12 2021 confidential
various RTL8821CE- Class II Change 20211129 OK Cover Letter(s) pdf 130.21 KiB December 12 2021 / December 13 2021
various RTL8821CE- Confidentiality Request OK Cover Letter(s) pdf 157.62 KiB December 12 2021 / December 13 2021
various RTL8821CE- Declaration of authorization FCC OK Cover Letter(s) pdf 35.94 KiB December 12 2021 / December 13 2021
various RTL8821CE- TestRpt SAR 20211201 RF Exposure Info pdf 3.51 MiB December 12 2021 / December 13 2021
various RTL8821CE- Tsup Test Setup Photos pdf 1.72 MiB December 12 2021 / December 13 2021
various RTL8821CE- UNII Declaration letter FCC OK Cover Letter(s) pdf 443.15 KiB December 12 2021 / December 13 2021
various Confidential RTL8821CE- ISED BlkDia Block Diagram pdf December 09 2021 confidential
various RTL8821CE- TestRpt SAR - 1202 RF Exposure Info pdf 3.54 MiB December 09 2021
various RTL8821CE- UNII Declaration letter FCC OK Cover Letter(s) pdf 443.20 KiB December 09 2021
various C2PC Request Letter Cover Letter(s) pdf 548.06 KiB November 05 2021
various Confidentiality Request Letter Cover Letter(s) pdf 522.69 KiB November 05 2021
various Declaration Letter Models Difference Cover Letter(s) pdf 534.17 KiB November 05 2021
various SAR Report RF Exposure Info pdf 3.67 MiB November 05 2021
various Confidential RTL8821CE- BlkDia Block Diagram pdf December 27 2020 confidential
various Confidential RTL8821CE- Schem Schematics pdf December 27 2020 confidential
various RTL8821CE- Class II Change 20201223 Cover Letter(s) pdf 177.77 KiB December 27 2020 / December 28 2020
various RTL8821CE- Confidentiality Request 20201217 Cover Letter(s) pdf 157.66 KiB December 27 2020 / December 28 2020
various RTL8821CE- Declaration of authorization 20201217 Cover Letter(s) pdf 35.95 KiB December 27 2020 / December 28 2020
various RTL8821CE- TestRpt SAR 20201218 RF Exposure Info pdf 4.26 MiB December 27 2020 / December 28 2020
various RTL8821CE- Tsup SAR Test Setup Photos pdf 180.89 KiB December 27 2020 / June 26 2021 delayed release
various RTL8821CE- UNII Declaration letter 20201217 Cover Letter(s) pdf 434.01 KiB December 27 2020 / December 28 2020
various RTL8821CE- ISED Tsup SAR Test Setup Photos pdf December 27 2020 / June 26 2021 delayed release
various E18882 E1600WKA UM draft10 Users Manual pdf 4.56 MiB April 07 2022 / October 05 2022 delayed release
various E20075 E1600WKA QSG V2 draft2 Users Manual pdf 1.82 MiB April 07 2022 / October 05 2022 delayed release
various RTL8821CE- User Manual Users Manual pdf 1.16 MiB December 12 2021 / December 13 2021
various RTL8821CE- UserMan Part1 Users Manual pdf 4.81 MiB December 27 2020 / June 26 2021 delayed release
various RTL8821CE- UserMan Part2 Users Manual pdf 3.19 MiB December 27 2020 / June 26 2021 delayed release
various User Manual Users Manual pdf 2.11 MiB July 08 2022 / October 09 2022 delayed release
various User Manual-1 Users Manual pdf 1.15 MiB November 05 2021 / May 05 2022 delayed release
various User Manual-2 Users Manual pdf 1.32 MiB November 05 2021 / May 05 2022 delayed release
various User Manual Users Manual pdf 3.06 MiB February 21 2023 / August 21 2023 delayed release
various 21-2124 EUT Internal Photos FCC IC Internal Photos pdf 1.89 MiB April 07 2022 / October 05 2022 delayed release
various Internal Photos Internal Photos pdf 2.13 MiB July 08 2022 / October 09 2022 delayed release
various Internal Photographs Internal Photos pdf 4.89 MiB February 21 2023 / August 21 2023 delayed release
various Internal Photos pdf July 06 2022 / July 07 2022
various RTL8821CE- IntPho Internal Photos pdf 2.23 MiB December 09 2021
various TempConfidential RTL8821CE- Inpho SAR Internal Photos pdf 3.59 MiB December 27 2020 / June 26 2021 delayed release
various 21-2124 EUT External Photos FCC IC External Photos pdf 1.15 MiB April 07 2022 / October 05 2022 delayed release
various External Photos External Photos pdf 1.19 MiB July 08 2022 / October 09 2022 delayed release
various External Photographs External Photos pdf 966.19 KiB February 21 2023 / August 21 2023 delayed release
various RTL8821CE- Expho External Photos pdf 1.24 MiB December 12 2021 / December 13 2021
various RTL8821CE- ExtPho External Photos pdf 676.34 KiB December 09 2021
various TempConfidential RTL8821CE- Expho SAR External Photos pdf 538.48 KiB December 27 2020 / June 26 2021 delayed release
various ID Label and Location ID Label/Location Info pdf 659.08 KiB November 05 2021
various Label Info E1600WK 21-2124 ID Label/Location Info pdf 114.41 KiB April 07 2022 / April 08 2022
various ID Label/Location Info pdf July 08 2022 / July 11 2022
various ID Label/Location Info pdf July 08 2022 / July 11 2022
various RTL8821CE- ISED Label ID Label/Location Info pdf 314.29 KiB December 27 2020 / December 28 2020
various RTL8821CE- Inpho ID Label/Location Info pdf 5.09 MiB December 12 2021 / December 13 2021
various RTL8821CE- Label and Location ID Label/Location Info pdf 3.09 MiB December 12 2021 / December 13 2021
various ID Label/Location Info pdf February 21 2023
various ID Label/Location Info pdf February 21 2023
various ID Label/Location Info pdf February 21 2023
various Attestation Statements pdf February 21 2023
various Attestation Statements pdf February 21 2023
various Cover Letter(s) pdf February 21 2023
various Cover Letter(s) pdf February 21 2023
various Cover Letter(s) pdf February 21 2023
various Cover Letter(s) pdf February 21 2023
various Test Report pdf February 21 2023
various Test Report pdf February 21 2023
various Test Report pdf February 21 2023
various Test Report pdf February 21 2023
various RF Exposure Info pdf February 21 2023
various TsUp SAR Test Setup Photos pdf 1.44 MiB February 21 2023 / August 21 2023 delayed release
various Cover Letter(s) pdf July 08 2022 / July 11 2022
various Cover Letter(s) pdf July 08 2022 / July 11 2022
various Cover Letter(s) pdf July 08 2022 / July 11 2022
various RF Exposure Info pdf July 08 2022 / July 11 2022
various RF Exposure Info pdf July 08 2022 / July 11 2022
various Test Setup Photos SAR Test Setup Photos pdf 135.55 KiB July 08 2022 / October 09 2022 delayed release
various Cover Letter(s) pdf July 07 2022 / July 08 2022
various RF Exposure Info pdf July 07 2022 / July 08 2022
various RF Exposure Info pdf July 07 2022 / July 08 2022
various Test Setup Photos Test Setup Photos pdf 1.35 MiB July 07 2022 / October 06 2022 delayed release
various Cover Letter(s) pdf July 07 2022 / July 08 2022
various RF Exposure Info pdf July 06 2022 / July 07 2022
various RF Exposure Info pdf July 06 2022 / July 07 2022
various TSUP SAR Test Setup Photos pdf 128.17 KiB July 06 2022 / October 04 2022 delayed release
various 2202FS17 FCC SAR 21-2124 RF Exposure Info pdf 1.65 MiB April 07 2022 / April 08 2022
various Appendix A Conducted Power Measurements RF Exposure Info pdf 856.67 KiB April 07 2022 / April 08 2022
various Appendix B System Performance Check Plots RF Exposure Info pdf 259.52 KiB April 07 2022 / April 08 2022
various Appendix C Highest Measurement Plots RF Exposure Info pdf 413.49 KiB April 07 2022 / April 08 2022
various Appendix D Calibration Certificates RF Exposure Info pdf 2.47 MiB April 07 2022 / April 08 2022
various Appendix E Test Setup Photographs SAR Test Setup Photos pdf 401.76 KiB April 07 2022 / October 05 2022 delayed release
various C2PC letter OK Cover Letter(s) pdf 436.30 KiB April 07 2022 / April 08 2022
various Confidentiality Request OK Cover Letter(s) pdf 475.82 KiB April 07 2022 / April 08 2022
various FCC agent authorization OK Cover Letter(s) pdf 567.29 KiB April 07 2022 / April 08 2022
various RTL8821CE- Class II Change 20211129 OK Cover Letter(s) pdf 130.21 KiB December 12 2021 / December 13 2021
various RTL8821CE- Confidentiality Request OK Cover Letter(s) pdf 157.62 KiB December 12 2021 / December 13 2021
various RTL8821CE- Declaration of authorization FCC OK Cover Letter(s) pdf 35.94 KiB December 12 2021 / December 13 2021
various RTL8821CE- TestRpt SAR 20211201 RF Exposure Info pdf 3.51 MiB December 12 2021 / December 13 2021
various RTL8821CE- Tsup Test Setup Photos pdf 1.72 MiB December 12 2021 / December 13 2021
various RTL8821CE- UNII Declaration letter FCC OK Cover Letter(s) pdf 443.15 KiB December 12 2021 / December 13 2021
various RTL8821CE- TestRpt SAR - 1202 RF Exposure Info pdf 3.54 MiB December 09 2021
various RTL8821CE- UNII Declaration letter FCC OK Cover Letter(s) pdf 443.20 KiB December 09 2021
various C2PC Request Letter Cover Letter(s) pdf 548.06 KiB November 05 2021
various Confidentiality Request Letter Cover Letter(s) pdf 522.69 KiB November 05 2021
various Declaration Letter Models Difference Cover Letter(s) pdf 534.17 KiB November 05 2021
various SAR Report RF Exposure Info pdf 3.67 MiB November 05 2021
various RTL8821CE- Class II Change 20201223 Cover Letter(s) pdf 177.77 KiB December 27 2020 / December 28 2020
various RTL8821CE- Confidentiality Request 20201217 Cover Letter(s) pdf 157.66 KiB December 27 2020 / December 28 2020
various RTL8821CE- Declaration of authorization 20201217 Cover Letter(s) pdf 35.95 KiB December 27 2020 / December 28 2020
various RTL8821CE- TestRpt SAR 20201218 RF Exposure Info pdf 4.26 MiB December 27 2020 / December 28 2020
various RTL8821CE- Tsup SAR Test Setup Photos pdf 180.89 KiB December 27 2020 / June 26 2021 delayed release
various RTL8821CE- UNII Declaration letter 20201217 Cover Letter(s) pdf 434.01 KiB December 27 2020 / December 28 2020

frequency equipment class purpose
1 2023-02-21 2412 ~ 2472 DTS - Digital Transmission System Class II Permissive Change
2 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
3 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
4 2022-07-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
5 2412 ~ 2472 DTS - Digital Transmission System
6 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
7 2022-07-08 2412 ~ 2472 DTS - Digital Transmission System
8 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
9 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
10 2022-07-07 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
11 2412 ~ 2472 DTS - Digital Transmission System
12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
13 2022-04-08 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
14 2412 ~ 2472 DTS - Digital Transmission System
15 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
16 2021-12-13 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
17 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
18 2412 ~ 2472 DTS - Digital Transmission System
19 2021-12-09 2412 ~ 2472 DTS - Digital Transmission System
20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
21 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
22 2021-11-05 2412 ~ 2472 DTS - Digital Transmission System
23 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
25 2020-12-28 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
26 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
27 2412 ~ 2472 DTS - Digital Transmission System
28 2020-12-25 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
29 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
30 2412 ~ 2472 DTS - Digital Transmission System
31 2019-02-01 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Class II permissive change or modification of presently authorized equipment
32 2412 ~ 2472 DTS - Digital Transmission System
33 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
34 2019-01-31 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
35 2412 ~ 2472 DTS - Digital Transmission System
36 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
37 2019-01-28 2402 ~ 2480 DTS - Digital Transmission System
38 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
39 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
40 2019-01-24 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
41 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
42 2412 ~ 2472 DTS - Digital Transmission System
43 2019-01-23 2402 ~ 2480 DTS - Digital Transmission System
44 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
45 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
46 2019-01-22 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
47 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
48 2412 ~ 2472 DTS - Digital Transmission System
49 2019-01-19 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
50 2019-01-18 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
51 2412 ~ 2472 DTS - Digital Transmission System
52 2019-01-03 2412 ~ 2472 DTS - Digital Transmission System
53 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
54 5500 ~ 5720 NII - Unlicensed National Information Infrastructure TX
55 2018-12-28 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
56 2412 ~ 2472 DTS - Digital Transmission System
57 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
58 2018-12-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
59 2412 ~ 2472 DTS - Digital Transmission System
60 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
61 2018-10-11 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
62 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
63 2412 ~ 2472 DTS - Digital Transmission System
64 2018-10-08 2412 ~ 2472 DTS - Digital Transmission System
65 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
66 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
67 2018-07-02 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
68 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
69 2412 ~ 2472 DTS - Digital Transmission System
70 2018-06-29 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
71 2412 ~ 2472 DTS - Digital Transmission System
72 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
73 2018-05-28 2412 ~ 2472 DTS - Digital Transmission System
74 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
75 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
76 2018-05-02 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
77 2412 ~ 2472 DSS - Part 15 Spread Spectrum Transmitter
78 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
79 2018-04-20 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
80 2412 ~ 2472 DTS - Digital Transmission System
81 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
82 2018-03-27 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
83 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
84 2412 ~ 2472 DTS - Digital Transmission System
85 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
86 2018-03-26 2412 ~ 2467 DTS - Digital Transmission System
87 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
88 2018-03-12 2412 ~ 2472 DTS - Digital Transmission System
89 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
90 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
91 2018-03-02 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
92 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
93 2412 ~ 2462 DTS - Digital Transmission System
94 2018-02-23 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
95 2412 ~ 2462 DTS - Digital Transmission System
96 2412 ~ 2462 DTS - Digital Transmission System
97 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
98 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
99 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
100 2017-12-22 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
101 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
102 2412 ~ 2472 DTS - Digital Transmission System
103 2017-12-12 2412 ~ 2472 DTS - Digital Transmission System
104 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
105 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
106 2017-09-29 2412 ~ 2462 DTS - Digital Transmission System
107 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
108 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
109 2017-09-14 2412 ~ 2472 DTS - Digital Transmission System
110 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
111 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
112 2017-08-16 2412 ~ 2472 DTS - Digital Transmission System
113 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
114 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
115 2017-05-24 2412 ~ 2472 DTS - Digital Transmission System
116 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
117 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
118 2017-05-23 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter
119 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
120 2412 ~ 2472 DTS - Digital Transmission System
121 2016-12-12 2402 ~ 2480 DSS - Part 15 Spread Spectrum Transmitter Original Equipment
122 5745 ~ 5825 NII - Unlicensed National Information Infrastructure TX
123 2412 ~ 2472 DTS - Digital Transmission System

Application Forms

app s Applicant Information
various Effective 2023-02-21
various 2022-07-11
various 2022-07-08
various 2022-07-07
various 2022-04-08
various 2021-12-13
various 2021-12-09
various 2021-11-05
various 2020-12-28
various 2020-12-25
various 2019-02-01
various 2019-01-31
various 2019-01-28
various 2019-01-24
various 2019-01-23
various 2019-01-22
various 2019-01-19
various 2019-01-18
various 2019-01-03
various 2018-12-28
various 2018-12-11
various 2018-10-11
various 2018-10-08
various 2018-07-02
various 2018-06-29
various 2018-05-28
various 2018-05-02
various 2018-04-20
various 2018-03-27
various 2018-03-26
various 2018-03-12
various 2018-03-02
various 2018-02-23
various 2017-12-22
various 2017-12-12
various 2017-09-29
various 2017-09-14
various 2017-08-16
various 2017-05-24
various 2017-05-23
various 2016-12-12
various Applicant's complete, legal business name Realtek Semiconductor Corp.
various FCC Registration Number (FRN) 0020109807
various Physical Address No. 2 Innovation Road II, Hsinchu Science Park
various No. 2
various Hsinchu, N/A
various Hsinchu
various Hsinchu, 300
various Taiwan
app s TCB Information
various TCB Application Email Address b******@phoenix-testlab.de
various t******@timcoengr.com
various h******@acbcert.com
various v******@nemko.com
various t******@siemic.com
various c******@telefication.com
various T******@TIMCOENGR.COM
various U******@SGS.COM
various t******@cetecom.com
various u******@sgs.com
various TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
various Grantee Code TX2
various Equipment Product Code RTL8821CE
app s Person at the applicant's address to receive grant or for contact
various Name D****** L******
various Title Project Manager
various Telephone Number 886-3******** Extension:
various Fax Number 886-3********
various E-mail d******@realtek.com
app s Technical Contact
various Firm Name DEKRA Testing and Certification Co., Ltd
various DEKRA Testing and Certification Co., Ltd.
various BTL Inc.
various DEKRA Testing and Certification (Suzhou) Co., Ltd.
various Compliance Certification Services( Kunshan) Inc.
various Compliance Certification Services (Kunshan) Inc.
various Shenzhen BALUN Technology Co., Ltd
various SGS Taiwan Ltd.
various SGS Taiwan Ltd.tt
various Compliance Certification Services Inc.
various Compliance Certification Services
various Name F****** Y********
various S******** L****
various J****** Z********
various J******** F******
various x**** w****
various W******** C****
various Physical Address No.5-22, Ruishukeng, Linkou Dist.
various No. 5-22, Ruishukeng, Linkou Dist.
various No.3 Jinshagang 1st Rd, Shixia, Dalang
various No. 99, Hongye Road, Suzhou Industrial Park
various No. 10, Weiye Rd, Innovation Park
various Block B, FL 1, Baisha Science and Technology Park
various No. 10, Weiye Rd, Innovation Park, Eco&Tec Develop
various 134, Wu Kung Rd., Wuku Industrial Zone
various Block B, FL 1, Baisha Science and
various 215300
various New Taipei City, 244
various New Taipei City, 24451
various New Taipei CIty, 24451
various New Taipei City
various Suzhou, Jiangsu, 215006
various Suzhou, Jiangsu
various Kunshan, Jiangsu
various Kunshan
various Kunshan, 215300
various Taiwan
various China
various Christmas Island
various Telephone Number 88622********
various +8862********
various 88628********
various 886-2********
various 86-76********
various 86-51********
various 86-51******** Extension:
various 86-51********
various 86-75********
various 88622********
various 86-51******** Extension:
various Fax Number 886-2********
various 86-76********
various 86-51********
various 86-51********
various 86-51********
various 86-75********
various 88622********
various E-mail f******@dekra.com
various s******@newbtl.com
various j******@dekra.com
various j******@sgs.com
various x******@baluntek.com
various j******@ccsrf.com
various w******@sgs.com
app s Non Technical Contact
various Firm Name BTL Inc.
various Compliance Certification Services( Kunshan) Inc.
various Compliance Certification Services (Kunshan) Inc.
various Shenzhen BALUN Technology Co., Ltd
various SGS Taiwan Ltd.
various Compliance Certification Services Inc.
various Compliance Certification Services
various Name M******** W******
various M**** L****
various T**** Z******
various J****** F********
various W**** C****
various m******** l********
various Physical Address No.3 Jinshagang 1st Rd, Shixia, Dalang
various No. 10, Weiye Rd, Innovation Park
various Block B, FL 1, Baisha Science and Technology Park
various No. 10, Weiye Rd, Innovation Park, Eco&Tec Develop
various 134, Wu Kung Rd., Wuku Industrial Zone
various Block B, FL 1, Baisha Science and
various 215300
various Kunshan, Jiangsu
various Kunshan, 215300
various China
various Taiwan
various Telephone Number 86-76********
various 86-51********
various 86-75********
various 86-51******** Extension:
various 88622********
various 86-51******** Extension:
various 86-51******** Extension:
various 86-75********
various Fax Number 86-76********
various 86-51********
various 86-75********
various 88622********
various E-mail m******@newbtl.com
various M******@sgs.com
various y******@baluntek.com
various j******@ccsrf.com
various w******@sgs.com
various M******@ccsrf.com
various m******@ccsrf.com
app s Confidentiality (long or short term)
various Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousLong-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
variousNo
variousIf so, specify the short-term confidentiality release date (MM/DD/YYYY format)08/21/2023
various10/09/2022
various10/06/2022
various10/04/2022
various10/05/2022
various05/05/2022
various06/26/2021
various06/24/2021
various08/01/2019
various07/30/2019
various07/27/2019
various07/24/2019
various07/22/2019
various07/21/2019
various07/18/2019
various07/02/2019
various06/26/2019
various04/09/2019
various04/06/2019
various12/27/2018
various12/21/2018
various11/22/2018
various10/30/2018
various10/18/2018
various10/17/2018
various09/09/2018
various09/23/2018
various09/04/2018
various08/29/2018
various08/22/2018
various06/13/2018
various06/10/2018
various02/20/2018
various03/04/2018
various09/30/2017
various11/20/2017
various11/19/2017
various06/10/2017
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
various Is this application for software defined/cognitive radio authorization?No
variousEquipment ClassDTS - Digital Transmission System
variousDSS - Part 15 Spread Spectrum Transmitter
variousNII - Unlicensed National Information Infrastructure TX
variousDescription of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)802.11 a/b/g/n/ac RTL8821CE Combo module
various802.11a/b/g/n/ac RTL8821CE Combo module
various802.11a/b/g/n/ac RTL8821CE Combo Module
various802.11a/b/g/n/ac RTL8822BE Combo module
various802.11a/b/g/n/ac RTL8821CE
variousRelated OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
variousModular Equipment TypeSingle Modular Approval
variousLimited Single Modular Approval
variousDoes not apply
variousPurpose / Application is forClass II Permissive Change
variousClass II permissive change or modification of presently authorized equipment
variousOriginal Equipment
variousComposite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
variousRelated Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
variousGrant CommentsOutput Power listed is the maximum conducted output power. This device has 20 and 40 MHz bandwidth modes. <br> Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna- to-phantom separation is 0.79 W/kg. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: M1405Y, D1405Y, Y1405CY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-064, WA-P-LE-01-006, TZ20921 and TZ20924. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.73 W/kg and 1.16 W/kg at 1g tissues, respectively.
variousOutput Power listed is the maximum conducted output power. <br> Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna- to-phantom separation for stand-alone and simultaneous transmission conditions are &lt; 0.1 W/kg and 0.76 W/kg, respectively. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: M1405Y, D1405Y, Y1405CY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-064, WA-P-LE-01-006, TZ20921 and TZ20924. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are &lt;0.10 W/kg and 1.16 W/kg at 1g tissues, respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20, 40, and 80 MHz bandwidth modes. <br> Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna-to-phantom separation for stand-alone and simultaneous transmission conditions are 0.74W/kg and 0.76 W/kg, respectively. <br> <br> Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: M1405Y, D1405Y, Y1405CY.; Brand: ASUS, with antenna INPAQ, model no.: WA-P-LE-02-064, WA-P-LE-01-006, TZ20921 and TZ20924. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.12 W/kg and 1.16 W/kg at 1g tissues, respectively.
variousOutput Power listed is the maximum conducted output power. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna- to-phantom separation for stand-alone and simultaneous transmission conditions are &lt; 0.1 W/kg and 0.76 W/kg, respectively. Class II Permissive Change: Authorizes portable use when integrated into dynabook notebook computers, models SATELLITE C30-K and SATELLITE PRO C30-K. The highest reported SAR for use on the body and simultaneous transmission exposure conditions are &lt; 0.10 W/kg and 0.92 W/kg, respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna- to-phantom separation is 0.79 W/kg. Class II Permissive Change: Authorizes portable use when integrated into dynabook notebook computers, models SATELLITE C30-K and SATELLITE PRO C30-K. The highest reported SAR is 0.98 W/kg.
variousOutput Power listed is the maximum conducted output power. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna-to-phantom separation for stand-alone and simultaneous transmission conditions are 0.74W/kg and 0.76 W/kg, respectively. Class II Permissive Change: Authorizes portable use when integrated into dynabook notebook computers, models SATELLITE C30-K and SATELLITE PRO C30-K. The highest reported SAR for use on the body and simultaneous transmission exposure conditions are 0.87 W/kg and 0.92 W/kg, respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna- to-phantom separation is 0.79 W/kg. Class II Permissive Change: Authorizes portable use when integrated into dynabook notebook computers, models SATELLITE C50-K and SATELLITE PRO C50-K. The highest reported SAR is 0.65 W/kg.
variousOutput Power listed is the maximum conducted output power. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna- to-phantom separation for stand-alone and simultaneous transmission conditions are &lt; 0.1 W/kg and 0.76 W/kg, respectively. Class II Permissive Change: Authorizes portable use when integrated into dynabook notebook computers, models SATELLITE C50-K and SATELLITE PRO C50-K. The highest reported SAR for use on the body and simultaneous transmission exposure conditions are &lt; 0.10 W/kg and 0.88 W/kg, respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna-to-phantom separation for stand-alone and simultaneous transmission conditions are 0.74W/kg and 0.76 W/kg, respectively. Class II Permissive Change: Authorizes portable use when integrated into dynabook notebook computers, models SATELLITE C50-K and SATELLITE PRO C50-K. The highest reported SAR for use on the body and simultaneous transmission exposure conditions are 0.87 W/kg and 0.88 W/kg, respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna-to-phantom separation for stand-alone and simultaneous transmission conditions are 0.74W/kg and 0.76 W/kg, respectively. Class II Permissive Change: Authorizes portable use when integrated into dynabook notebook computers, models SATELLITE E40-K and SATELLITE PRO C40-K. The highest reported SAR for use on the body and simultaneous transmission exposure conditions are 1.17 W/kg and 1.21 W/kg, respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna- to-phantom separation is 0.79 W/kg. Class II Permissive Change: Authorizes portable use when integrated into dynabook notebook computers, models SATELLITE E40-K and SATELLITE PRO C40-K. The highest reported SAR is 0.83 W/kg.
variousOutput Power listed is the maximum conducted output power. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna- to-phantom separation for stand-alone and simultaneous transmission conditions are &lt; 0.1 W/kg and 0.76 W/kg, respectively. Class II Permissive Change: Authorizes portable use when integrated into dynabook notebook computers, models SATELLITE E40-K and SATELLITE PRO C40-K. The highest reported SAR for use on the body and simultaneous transmission exposure conditions are &lt; 0.10 W/kg and 1.21 W/kg, respectively.
variousOutput Power listed is the maximum conducted output power. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna- to-phantom separation for stand-alone and simultaneous transmission conditions are &lt; 0.1 W/kg and 0.76 W/kg, respectively. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: E1600WK.; Brand: ASUS, with antenna High-Tek, model no.: 0ACCN021036N, 0ACCN021035N and SOUTHSTAR, model no.: N12-8030-R0A, N12-8029-R0A. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are &lt;0.10 W/kg and 1.09 W/kg at 1g tissues, respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna- to-phantom separation is 0.79 W/kg. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: E1600WK.; Brand: ASUS, with antenna High-Tek, model no.: 0ACCN021036N, 0ACCN021035N and SOUTHSTAR, model no.: N12-8030-R0A, N12-8029-R0A. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 0.55 W/kg and 1.09 W/kg at 1g tissues, respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). The highest reported SAR at 5 mm antenna-to-phantom separation for stand-alone and simultaneous transmission conditions are 0.74W/kg and 0.76 W/kg, respectively. Class II Permissive Change for Reduce the WLAN Output Power through BIOS when device request approval for portable category specific host, Notebook PC, model number: E1600WK.; Brand: ASUS, with antenna High-Tek, model no.: 0ACCN021036N, 0ACCN021035N and SOUTHSTAR, model no.: N12-8030-R0A, N12-8029-R0A. SAR compliance for body-carry configurations are limited to provision at least 0 cm separation between the device and the user's body. The highest reported SAR values for the body-worn and simultaneous transmission use conditions are 1.06 W/kg and 1.09 W/kg at 1g tissues, respectively.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions inPart15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s)used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfyingRF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS TP1401K, J1401K and P1401FK with antenna AWAN, part no. AYP6Y-100245/ 14008-04740200(Main), AYP6Y-100246/ 14008-04740300 (Aux) and PULSE part no.SZ20241/14008-04740000(Main), SZ20244/ 14008-04740100 (Aux). The highest reported reported Body and Simultaneous SAR values are 1.16 W/kg and 1.24 W/kg.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee.OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS TP1401K,J1401K and P1401FK with antenna AWAN, part no. AYP6Y-100245/ 14008-04740200(Main), AYP6Y-100246/ 14008-04740300 (Aux) and PULSE part no. SZ20241/14008-04740000(Main), SZ20244/ 14008-04740100 (Aux). The highest reported reported Body and Simultaneous SAR values are 0.13 W/kg and 1.24 W/kg.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility ofthe Grantee.OEM integrators must be provided with antenna installation instructions andlabeling requirements for finished products. This grant is valid only when the device is soldto OEM integrators and the OEM integrators are instructed to ensure that the end user hasno manual instructions to remove or install the device. The antenna(s) used for thistransmitter must be installed to provide a separation distance of at least 20 cm from allpersons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has20 and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS TP1401K, J1401K and P1401FK with antenna AWAN, part no. AYP6Y-100245/ 14008-04740200(Main), AYP6Y-100246/ 14008-04740300 (Aux) and PULSE part no.SZ20241/14008-04740000(Main), SZ20244/ 14008-04740100 (Aux). The highest reported reported Body and Simultaneous SAR values are 0.76 W/kg and 1.24 W/kg.
variousSingle Modular Approval. Power listed is maximum power conducted. This module isrestricted to installation in products for use only in mobile and fixed applications.Compliance of this device in all final host configurations is the responsibility of the Grantee.OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has20 and 40 MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS TP1400K,J1400K and P1400FK with antenna AWAN, part no. AYP6Y-100245/ 14008-04740200(Main), AYP6Y-100246/ 14008-04740300 (Aux) and PULSE part no. SZ20241/14008-04740000(Main), SZ20244/ 14008-04740100 (Aux). The highest reported reported Body and Simultaneous SAR values are 0.87 W/kg and 1.31W/kg.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications.Compliance of this device in all final host configurations is the responsibility of the Grantee.OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS TP1400K, J1400K and P1400FK with antenna AWAN, part no. AYP6Y-100245/ 14008-04740200(Main), AYP6Y-100246/ 14008-04740300 (Aux) and PULSE part no. SZ20241/ 14008-04740000(Main), SZ20244/ 14008-04740100 (Aux). The highest reported reported Body and Simultaneous SAR values are 0.17 W/kg and 1.31 W/kg.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number ASUS TP1400K,J1400K and P1400FK with antenna AWAN, part no. AYP6Y-100245/ 14008-04740200(Main), AYP6Y-100246/ 14008-04740300 (Aux) and PULSE part no. SZ20241/14008-04740000(Main), SZ20244/ 14008-04740100 (Aux). The highest reported reported Body and Simultaneous SAR values are 1.14 W/kg and 1.31W/kg.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure along in the host of ASUSTeK Notebook PC, model: B3402FEA, B3402FE, B3408FEA, and B3408FE, as documented in this filing. The highest reported SAR for body exposure conditions is 0.51 W/kg.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure along in the host of ASUSTeK Notebook PC, model: B3402FEA, B3402FE, B3408FEA, and B3408FE, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are 0.59 W/kg and 0.64 W/kg, respectively.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Limited Single Modular Approval, to address RF Exposure along in the host of ASUSTeK Notebook PC, model: B3402FEA, B3402FE, B3408FEA, and B3408FE, as documented in this filing. The highest reported SAR for body exposure conditions and simultaneous transmission exposure conditions are &lt;0.10 W/kg and 0.64 W/kg, respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20, 40, and 80MHz bandwidth modes. Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3500CE, B3508CE, P3550CE, PX575CE and BW350CE with the antenna WNC, part no. 711100551031 and 711100551041. The highest reported Body and Simultaneous SAR values are 1.19 W/kg and 1.31 W/kg respectively.
variousOutput Power listed is the maximum conducted output power. Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3500CE, B3508CE, P3550CE, PX575CE and BW350CE with the antenna WNC, part no. 711100551031 and 711100551041. The highest reported Body and Simultaneous SAR values are 0.13 W/kg and 1.31 W/kg respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20 and 40 MHz bandwidth modes. Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3500CE, B3508CE, P3550CE, PX575CE and BW350CE with the antenna WNC, part no. 711100551031 and 711100551041. The highest reported Body is 1.02 W/kg.
variousOutput Power listed is the maximum conducted output power. This device has 20, 40, and 80MHz bandwidth modes. Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3400CE, B3408CE, P3450CE, PX475C and BW340CE with the antenna WNC, part no. 711100550031 and 711100550041. The highest reported Body and Simultaneous SAR values are 0.93 W/kg and 0.99 W/kg respectively.
variousOutput Power listed is the maximum conducted output power. Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k). Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3400CE, B3408CE, P3450CE, PX475C and BW340CE with the antenna WNC, part no. 711100550031 and 711100550041. The highest reported Body and Simultaneous SAR values are &lt;0.1 W/kg and 0.99 W/kg respectively.
variousOutput Power listed is the maximum conducted output power. This device has 20 and 40 MHz bandwidth modes. Limited Single Modular Approval. This module is approved only for integration in qualified laptops and tablets computers and must not be co-located or transmit simultaneously with any other antenna or transmitter. The antenna(s) used with this module must be installed in tablets and laptops to provide the minimum separation distance of 10 mm and 5mm, respectively, between the antenna and host housing, in all directions. The host manufacturer must confirm with the Grantee that the module continues to comply with the FCC RF exposure limits and specific grant conditions. This module must not be incorporated into any host device without retesting for compliance as a composite system. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) Class II Permissive Change with a decrease in the WLAN Output Power through BIOS respectively and to request approval for portable category specific host Notebook PC, model number: ASUS B3400CE, B3408CE, P3450CE, PX475C and BW340CE with the antenna WNC, part no. 711100550031 and 711100550041. The highest reported Body is 0.72 W/kg.
variousClass II Permissive Change: Add portable use in Lenovo Ideapad S540-14IWL********, 81ND********; Lenovo IdeaPad S540-14IWL Touch********, 81QX********; Lenovo IdeaPad S540-14API********, 81NH********, *, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is &lt;0.10W/kg and 1.19W/kg respectively. The antenna type: PIFA, Manufacturer: AWAN, Main Antenna part no ANP6Y100298 (DC330029000), Gain 1.13dBi (5GHz), 1.95dBi (2.4GHz), Aux Antenna part no ANP6Y100299 (DC330029010), Gain 1.91dBi (5GHz), -0.63dBi (2.4GHz); The antenna type: PIFA, Manufacturer: YAGEO Corporation Main Antenna part no ANTA0LC13101WLAN1 (DC330029G00), Gain 2.78dBi (5GHz), 0.00dBi (2.4GHz), Aux Antenna part no ANTA0LC13101WLAN2 (DC330029G10), Gain 0.93dBi (5GHz), 1.03dBi (2.4GHz). Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations
variousClass II Permissive Change: Add portable use in Lenovo Ideapad S540-14IWL********, 81ND********; Lenovo IdeaPad S540-14IWL Touch********, 81QX********; Lenovo IdeaPad S540-14API********, 81NH********, *, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is 0.47W/kg and 1.19W/kg respectively. The antenna type: PIFA, Manufacturer: AWAN, Main Antenna part no ANP6Y100298 (DC330029000), Gain 1.13dBi (5GHz), 1.95dBi (2.4GHz), Aux Antenna part no ANP6Y100299 (DC330029010), Gain 1.91dBi (5GHz), -0.63dBi (2.4GHz); The antenna type: PIFA, Manufacturer: YAGEO Corporation Main Antenna part no ANTA0LC13101WLAN1 (DC330029G00), Gain 2.78dBi (5GHz), 0.00dBi (2.4GHz), Aux Antenna part no ANTA0LC13101WLAN2 (DC330029G10), Gain 0.93dBi (5GHz), 1.03dBi (2.4GHz). Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change: Add portable use in Lenovo Ideapad S540-14IWL********, 81ND********; Lenovo IdeaPad S540-14IWL Touch********, 81QX********; Lenovo IdeaPad S540-14API********, 81NH********, *, (x=0~9, A~Z, a~z, - or blank). The highest reported SAR for body and simultaneous transmission exposure condition is 0.72W/kg and 1.19W/kg respectively. The antenna type: PIFA, Manufacturer: AWAN, Main Antenna part no ANP6Y100298 (DC330029000), Gain 1.13dBi (5GHz), 1.95dBi (2.4GHz), Aux Antenna part no ANP6Y100299 (DC330029010), Gain 1.91dBi (5GHz), -0.63dBi (2.4GHz); The antenna type: PIFA, Manufacturer: YAGEO Corporation Main Antenna part no ANTA0LC13101WLAN1 (DC330029G00), Gain 2.78dBi (5GHz), 0.00dBi (2.4GHz), Aux Antenna part no ANTA0LC13101WLAN2 (DC330029G10), Gain 0.93dBi (5GHz), 1.03dBi (2.4GHz). Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate into new portable platform (Brand/Model Number : Lenovo ; Lenovo IdeaPad S540-15IWL and as described in this filing). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body and simultaneous transmission use conditions are &lt; 0.1 W/kg and 1.17 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change : This change is to incorporate into new portable platform (Brand/Model Number : Lenovo ; Lenovo IdeaPad S540-15IWL and as described in this filing). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body and simultaneous transmission use conditions are 0.29 W/kg and 1.17 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate into new portable platform (Brand/Model Number : Lenovo ; Lenovo IdeaPad S540-15IWL and as described in this filing). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body and simultaneous transmission use conditions are 1.16 W/kg and 1.17 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change: Add portable use in HP Notebook PC, Model TPN-W138. The antenna type: PIFA, Manufacturer: WNC, Part Numbers 025.901GE.0001 (81EAA415.GHV) and 025.901GF.0001 (81EAA415.GHW); Gain +2.45 dBi (5GHz) and +1.58 dBi (2.4GHz). The highest reported SAR is 0.24 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change: Add portable use in HP Notebook PC, Model TPN-W138. The antenna type: PIFA, Manufacturer: WNC, Part Numbers 025.901GE.0001 (81EAA415.GHV) and 025.901GF.0001 (81EAA415.GHW); Gain +2.45 dBi (5GHz) and +1.58 dBi (2.4GHzThe highest reported SAR for body and simultaneous exposure conditions are &lt;0.10 W/kg and 1.29 W/kg respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: Add portable use in HP Notebook PC, Model TPN-W138. The antenna type: PIFA, Manufacturer: WNC, Part Numbers 025.901GE.0001 (81EAA415.GHV) and 025.901GF.0001 (81EAA415.GHW); Gain +2.45 dBi (5GHz) and +1.58 dBi (2.4GHz). The highest reported SAR for body and simultaneous exposure conditions are 1.26 W/kg and 1.29 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes.
variousC2PC to add Lenovo Ideapad C340-14IWL********, 81N4********, Lenovo Ideapad FLEX-14IWL********, 81SQ********, Lenovo IdeaPad C340-14API********, 81N6********, Lenovo IdeaPad FLEX-14API********, 81SS******** (x=0~9, A~Z, a~z, - or blank). Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousC2PC to add Lenovo Ideapad C340-14IWL********, 81N4********, Lenovo Ideapad FLEX-14IWL********, 81SQ********, Lenovo IdeaPad C340-14API********, 81N6********, Lenovo IdeaPad FLEX-14API********, 81SS******** (x=0~9, A~Z, a~z, - or blank). The highest reported SAR is 0.74W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousC2PC to add Lenovo Ideapad C340-14IWL********, 81N4********, Lenovo Ideapad FLEX-14IWL********, 81SQ********, Lenovo IdeaPad C340-14API********, 81N6********, Lenovo IdeaPad FLEX-14API********, 81SS******** (x=0~9, A~Z, a~z, - or blank). The highest reported SAR is 0.69W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W139. The highest reported SAR value is 0.31 W/kg, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HA.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HB.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W139. The highest reported Body and Simultaneous SAR values are &lt; 0.10 W/kg and 0.98 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HA.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HB.0001.
variousLimited Modular Approval. Power listed is maximum power conducted.. This device has 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W139. The highest reported Body and Simultaneous SAR values are 0.98 W/kg and 0.98 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HA.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901HB.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20, 40 and 80 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are 1.40 W/kg and 1.40 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GW.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GX.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W140. The highest reported Body and Simultaneous SAR values are &lt; 0.10 W/kg and 1.40 W/kg respectively, when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GW.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GX.0001.
variousLimited Modular Approval. Power listed is maximum power conducted. This device has 20 MHz and 40 MHz bandwidth modes. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: TPN-W140. The highest reported SAR is 0.32 W/kg when integrated using the antennas indicated below: Main Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GW.0001. AUX Antenna type: PIFA, Manufacturer: INPAQ, Part Number: 025.901GX.0001.
variousClass II Permissive Change: Add portable use in HP Notebook PC, Model TPN-Q217. The antenna type: PIFA, Manufacturer: High-Tek Electronics Co. Ltd, part no DQ60ACQD020 (0ACQD018016N), Gain -1.22dBi (5GHz), 0.05dBi (2.4GHz); The antenna type: PIFA, Manufacturer: INPAQ, part no DQ6LBLB0202 (WA-P-LB-02-595) , Gain 0.05dBi (5GHz), -1.09dBi (2.4GHz); The antenna type: PIFA, Manufacturer: WNC part no. DQ6415GHB00 (81EAA415.GHB), Gain 1.20dBi (5GHz), 1.88dBi (2.4GHz). The highest reported SAR &lt; 0.10W/Kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: Add portable use in HP Notebook PC, Model TPN-Q217. The antenna type: PIFA, Manufacturer: High-Tek Electronics Co. Ltd, part no DQ60ACQD020 (0ACQD018016N), Gain -1.22dBi (5GHz), 0.05dBi (2.4GHz); The antenna type: PIFA, Manufacturer: INPAQ, part no DQ6LBLB0202 (WA-P-LB-02-595) , Gain 0.05dBi (5GHz), -1.09dBi (2.4GHz); The antenna type: PIFA, Manufacturer: WNC part no. DQ6415GHB00 (81EAA415.GHB), Gain 1.20dBi (5GHz), 1.88dBi (2.4GHz). The highest reported SAR &lt; 0.10W/Kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes.
variousClass II Permissive Change: Add portable use in HP Notebook PC, Model TPN-Q217. The antenna type: PIFA, Manufacturer: High-Tek Electronics Co. Ltd, part no DQ60ACQD020 (0ACQD018016N), Gain -1.22dBi (5GHz), 0.05dBi (2.4GHz); The antenna type: PIFA, Manufacturer: INPAQ, part no DQ6LBLB0202 (WA-P-LB-02-595) , Gain 0.05dBi (5GHz), -1.09dBi (2.4GHz); The antenna type: PIFA, Manufacturer: WNC part no. DQ6415GHB00 (81EAA415.GHB), Gain 1.20dBi (5GHz), 1.88dBi (2.4GHz). The highest reported SAR &lt; 0.10W/Kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook PC, Model HSN-Q17C-4. The highest reported Body SAR value is 0.41 W/kg. Type: PIFA, Vendor: HONGBO, Part number: DQ602374800 (260-23748), Gain 2.4GHz: -0.48 dBi; 5GHz: -1.8 dBi Type: PIFA, Vendor: WNC, Part number: DQ6415GFS00 (81EAA415.GFS), Gain 2.4GHz: -1.26 dBi; 5GHz: -0.61 dBi Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. The device contains 5GHz WLAN and Bluetooth transmitters.
variousClass II Permissive Change: Adds portable use in HP Notebook PC, Model HSN-Q17C-4. Type: PIFA, Vendor: HONGBO, Part number: DQ602374800 (260-23748), Gain 2.4GHz: -0.48 dBi; 5GHz: -1.8 dBi Type: PIFA, Vendor: WNC, Part number: DQ6415GFS00 (81EAA415.GFS), Gain 2.4GHz: -1.26 dBi; 5GHz: -0.61 dBi Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The device contains 5GHz WLAN, 2.4GHz WLAN and Bluetooth LE transmitters.
variousClass II Permissive Change: Adds portable use in HP Notebook PC, Model HSN-Q17C-4. The highest reported Body and Simultaneous SAR values are 1.16 W/kg and 1.31 W/kg respectively. Type: PIFA, Vendor: HONGBO, Part number: DQ602374800 (260-23748), Gain 2.4GHz: -0.48 dBi; 5GHz: -1.8 dBi Type: PIFA, Vendor: WNC, Part number: DQ6415GFS00 (81EAA415.GFS), Gain 2.4GHz: -1.26 dBi; 5GHz: -0.61 dBi Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes. The device contains 2.4GHz WLAN, Bluetooth and Bluetooth LE transmitters.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes. The device contains 2.4GHz WLAN, Bluetooth and Bluetooth LE transmitters. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q17C-5. The highest reported Body and Simultaneous SAR values are 0.69 W/kg and 0.84 W/kg respectively. Type: PIFA, Vendor: HONGBO, Part number: DQ602374400 (260-23744), Gain 2.4GHz: -1.89 dBi; 5GHz: -2.88 dBi Type: PIFA, Vendor: WNC, Part number: DQ6415GFW00 (81EAA415.GFW), Gain 2.4GHz: -1.35 dBi; 5GHz: -1.68 dBi
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. The device contains 5GHz WLAN and Bluetooth transmitters. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q17C-5. The highest reported Body and Simultaneous SAR values are 0.13 W/kg and 0.84 W/kg respectively. Type: PIFA, Vendor: HONGBO, Part number: DQ602374400 (260-23744), Gain 2.4GHz: -1.89 dBi; 5GHz: -2.88 dBi Type: PIFA, Vendor: WNC, Part number: DQ6415GFW00 (81EAA415.GFW), Gain 2.4GHz: -1.35 dBi; 5GHz: -1.68 dBi
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The device contains 5GHz WLAN, 2.4GHz WLAN and Bluetooth LE transmitters. Class II Permissive Change: Adds portable operation when integrated into HP Notebook PC, Model: HSN-Q17C-5. Type: PIFA, Vendor: HONGBO, Part number: DQ602374400 (260-23744), Gain 2.4GHz: -1.89 dBi; 5GHz: -2.88 dBi Type: PIFA, Vendor: WNC, Part number: DQ6415GFW00 (81EAA415.GFW), Gain 2.4GHz: -1.35 dBi; 5GHz: -1.68 dBi
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The device contains 5GHz WLAN, 2.4GHz WLAN and Bluetooth LE transmitters. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP401M, R406M and J401M with antenna INPAQ, part no. METP401-1-NH, AN-000219B-001H, WA-F-LB-02-119(Main), METP401-2-NH, AN-000430B-001H, WA-F-LB-01-047(Aux) and YAGEO, part no. ANTA0AA12061WLAN1, ANTA0AA12061WLAN2. The highest reported Body and Simultaneous SAR values are 0.20W/kg and 1.20W/kg respectively.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. The device contains 5GHz WLAN and Bluetooth transmitters. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP401M, R406M and J401M with antenna INPAQ, part no. METP401-1-NH, AN-000219B-001H, WA-F-LB-02-119(Main), METP401-2-NH, AN-000430B-001H, WA-F-LB-01-047(Aux) and YAGEO, part no. ANTA0AA12061WLAN1, ANTA0AA12061WLAN2. The highest reported Body and Simultaneous SAR values are 1.00W/kg and 1.20W/kg respectively.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes. The device contains 2.4GHz WLAN, Bluetooth and Bluetooth LE transmitters. Class II Permissive Change with a decrease in the Output Power through firmware and to request approval for portable category specific host Notebook PC, model number: ASUS TP401M, R406M and J401M with antenna INPAQ, part no. METP401-1-NH, AN-000219B-001H, WA-F-LB-02-119(Main), METP401-2-NH, AN-000430B-001H, WA-F-LB-01-047(Aux) and YAGEO, part no. ANTA0AA12061WLAN1, ANTA0AA12061WLAN2. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.15W/kg respectively.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q15C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Implementation utilizes the following antenna configuration: TH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGR00 (81EAA415.GGR), Gain 2.4G: -2.43 dBi Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374700 (260-23747), Gain 2.4G: -2.03 dBi NTH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GFS00 (81EAA415.GFS), Gain 2.4G: -1.26 dBi Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374800 (260-23748), Gain 2.4G: -0.48 dBi Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q15C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Implementation utilizes the following antenna configuration: TH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGR00 (81EAA415.GGR), Gain 5G: 1.3 dBi Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374700 (260-23747), Gain 5G: -1.14 dBi NTH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GFS00 (81EAA415.GFS), Gain 5G: -0.61 dBi Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374800 (260-23748), Gain 5G: -1.8 dBi The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.33 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40 and 80 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q15C. This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Implementation utilizes the following antenna configuration: TH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGR00 (81EAA415.GGR), Gain 2.4G: -2.43 dBi Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374700 (260-23747), Gain 2.4G: -2.03 dBi NTH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GFS00 (81EAA415.GFS), Gain 2.4G: -1.26 dBi Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374800 (260-23748), Gain 2.4G: -0.48 dBi The highest reported SAR is 0.32 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q16C, utilizing the following antenna configuration: TH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGX00 (81EAA415.GGX), Gain 2.4G: -2.89 dBi, Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374300 (260-23743), Gain 2.4G: -2.94 dBi, NTH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GFW00 (81EAA415.GFW), Gain 2.4G: -1.35 dBi, Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374400 (260-23744), Gain 2.4G: -1.89 dBi This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The highest reported SAR is 0.46 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q16C, utilizing the following antenna configuration: TH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGX00 (81EAA415.GGX), Gain 2.4G: -2.89 dBi, Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374300 (260-23743), Gain 2.4G: -2.94 dBi, NTH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GFW00 (81EAA415.GFW), Gain 2.4G: -1.35 dBi, Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374400 (260-23744), Gain 2.4G: -1.89 dBi This device must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change: Adds portable use in HP Notebook Computer, Model HSN-Q16C, utilizing the following antenna configuration: TH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GGX00 (81EAA415.GGX), Gain 5G: -2.93 dBi Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374300 (260-23743), Gain 5G: -2.92 dBi NTH Antenna type: PIFA, Manufacturer: WNC, Part Number: DQ6415GFW00 (81EAA415.GFW), Gain 5G: -1.68 dBi Antenna type: PIFA, Manufacturer: HONGBO, Part Number: DQ602374400 (260-23744), Gain 5G: -2.88 dBi Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate into new portable platform (Brand/Model Number : Lenovo ideapad 130S-11IGM; 81KT). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body and simultaneous transmission use conditions are &lt; 0.1 W/kg and 1.14 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change : This change is to incorporate into new portable platform (Brand/Model Number : Lenovo ideapad 130S-11IGM; 81KT). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body and simultaneous transmission use conditions are 1.12 W/kg and 1.14 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate into new portable platform (Brand/Model Number : Lenovo ideapad 130S-11IGM; 81KT). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body and simultaneous transmission use conditions are 0.40 W/kg and 0.43 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate into new portable platform(Lenovo notebook computer, Brand/Model Number : Lenovo/Lenovo ideapad 130S-14IGM, 81KU) with the equivalent antennas of the lower gain values. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. The highest reported SAR for product specific (body), and simultaneous transmission use conditions are 1.12 W/kg, and 1.14 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate into new portable platform(Lenovo notebook computer, Brand/Model Number : Lenovo/Lenovo ideapad 130S-14IGM, 81KU) with the equivalent antennas of the lower gain values. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. The highest reported SAR for product specific (body) use condition is 0.39 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate into new portable platform(Lenovo notebook computer, Brand/Model Number : Lenovo/Lenovo ideapad 130S-14IGM, 81KU) with the equivalent antennas of the lower gain values. The highest reported SAR value for simultaneous transmission use condition is 1.14 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change : This change is to incorporate into new portable platform(Lenovo notebook PC, Brand/Model Number : Lenovo YOGA720-12IKB with the equivalent antennas of the lower gain values. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. The highest reported SAR for product specific (body), and simultaneous transmission use conditions are 0.71 W/kg, and 1.26 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate into new portable platform(Lenovo notebook PC, Brand/Model Number : Lenovo YOGA720-12IKB with the equivalent antennas of the lower gain values. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. The highest reported SAR for product specific (body), and simultaneous transmission use conditions are 1.16 W/kg, and 1.26 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to incorporate into new portable platform(Lenovo notebook PC, Brand/Model Number : Lenovo YOGA720-12IKB with the equivalent antennas of the lower gain values. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousCIIPC to add host HP Notebook PC model TPN-W124. The highest reported SAR value is &lt;0.10W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousCIIPC to add host HP Notebook PC model TPN-W124. The highest reported SAR value is 0.79W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change: This change is to a) add new portable platform, notebook (Lenovo ideapad 330S-15IKB GTX1050; 81GC). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.06 W/kg, and 0.42W/kg. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook (Lenovo ideapad 330S-15IKB GTX1050; 81GC). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.26W/kg, and 0.42W/kg, respectively. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40MHz bandwidth modes.
variousClass II Permissive Change: This change is to a) add new portable platform, notebook (Lenovo ideapad 330S-15IKB GTX1050; 81GC). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.36 W/kg, and 0.42W/kg. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform(HP notebook PC, Brand/Model Number : HP/ TPN-W132) and to add 2 sets of antennas with lower gain values. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR for body exposure condition is 1.1 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change with a decrease in the WLAN Output Power and channels 12 and 13 are disabled through firmware, add to request approval for portable category specific host notebook/tablet (Lenovo ideapad FLEX 6-14IKB, Lenovo ideapad FLEX 6-14ARR). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 1.30 W/kg, and 1.40 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change with a decrease in the WLAN Output Power and channels 12 and 13 are disabled through firmware, add to request approval for portable category specific host notebook/tablet (Lenovo ideapad FLEX 6-14IKB, Lenovo ideapad FLEX 6-14ARR). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.39 W/kg, and 1.40 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40MHz bandwidth modes.
variousClass II Permissive Change with a decrease in the WLAN Output Power and channels 12 and 13 are disabled through firmware, add to request approval for portable category specific host notebook/tablet (Lenovo ideapad FLEX 6-14IKB, Lenovo ideapad FLEX 6-14ARR). Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change : This change is to add new portable platform(HP notebook PC, Brand/Model Number : HP/ TPN-W132) and to add 2 sets of antennas with lower gain values. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure condition is 0.37 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform (HP notebook PC, Brand/Model Number : HP/ TPN-W132) and to add 2 sets of antennas with lower gain values. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR value for body use condition is 0.01 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousClass II Permissive Change : This change is to add new portable platform(HP notebook PC, Brand/Model Number : HP/ TPN-W131) and to add 2 sets of antennas with higher gain values. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure condition is 0.68 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform(HP notebook PC, Brand/Model Number : HP/ TPN-W131) and to add 2 sets of antennas with higher gain values. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR for body exposure condition is 1.19 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform(HP notebook PC, Brand/Model Number : HP/ TPN-W131) and to add 2 sets of antennas with higher gain values. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR value for body use condition is &lt; 0.1 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook/tablet (Lenovo V530s-14IKB, 81EX). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.08 W/kg, and 1.12W/kg. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook/tablet (Lenovo V530s-14IKB, 81EX). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 1.12 W/kg, and 1.12W/kg. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook(Lenovo V530s-14IKB, 81EX). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 1.11W/kg, and 1.12W/kg, respectively. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook/tablet (Lenovo ideapad 330S-14IKB, 81F4; Lenovo ideapad 330S-14AST, 81F8). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.03 W/kg, and 0.58W/kg. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook (Lenovo ideapad 330S-15IKB, 81F5; Lenovo ideapad 330S-15AST, 81F9; Lenovo ideapad 330S-15ARR, 81FB). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.44 W/kg, and 0.62W/kg, respectively. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook/tablet (Lenovo ideapad 330S-14IKB, 81F4; Lenovo ideapad 330S-14AST, 81F8). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.47 W/kg, and 0.58W/kg, respectively. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook (Lenovo ideapad 330S-15IKB, 81F5; Lenovo ideapad 330S-15AST, 81F9; Lenovo ideapad 330S-15ARR, 81FB). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.59 W/kg, and 0.62W/kg, respectively. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook/tablet (Lenovo ideapad 330S-14IKB, 81F4; Lenovo ideapad 330S-14AST, 81F8). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.55 W/kg, and 0.58W/kg. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook (Lenovo ideapad 330S-15IKB, 81F5; Lenovo ideapad 330S-15AST, 81F9; Lenovo ideapad 330S-15ARR, 81FB). Channels 12 and 13 are disabled via software in the host platform. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.03 W/kg, and 0.62W/kg, respectively. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform Lenovo Regulatory Model Number: Lenovo FLEX 6-11IGM, 81A7. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.84 W/kg and 0.94 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform Lenovo Regulatory Model Number: Lenovo FLEX 6-11IGM, 81A7. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR value for simultaneous transmission use condition is 0.22 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform Lenovo Regulatory Model Number: Lenovo FLEX 6-11IGM, 81A7. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure conditions is 0.72 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousLimited Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: This change is to add new portable notebook/tablet (Lenovo Notebook Computer TP00066F). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.52 W/kg, and 0.52 W/kg, respectively.
variousLimited Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes. Class II Permissive Change: This change is to add new portable notebook/tablet (Lenovo Notebook Computer TP00066F). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 1.20 W/kg, and 1.36 W/kg, respectively.
variousLimited Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This change is to add new portable notebook/tablet (Lenovo Notebook Computer TP00066F). The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook/tablet (Lenovo MIIX520-12IKB; 81CG; 20M3; 20M4). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure conditions is 1.04 W/kg. b) The frequency ranges and the configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook/tablet (Lenovo MIIX520-12IKB; 81CG; 20M3; 20M4). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 1.19 W/kg, and 1.33W/kg, respectively. b) The configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to a) add new portable platform, notebook/tablet (Lenovo MIIX520-12IKB; 81CG; 20M3; 20M4). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure and simultaneous use conditions are 0.14 W/kg, and 1.33W/kg, respectively. b) The configuration of the operation are disabled via software changes as described in this filing. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform, notebook/tablet (Lenovo/Lenovo ideapad 720S-13IKB; Lenovo ideapad 720S Touch-13IKB; Lenovo ideapad 720S-13ARR). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body exposure conditions is 0.47 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform, notebook/tablet (Lenovo/Lenovo ideapad 720S-13IKB; Lenovo ideapad 720S Touch-13IKB; Lenovo ideapad 720S-13ARR). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR value for simultaneous transmission use condition is 1.25 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform, notebook/tablet (Lenovo/Lenovo ideapad 720S-13IKB; Lenovo ideapad 720S Touch-13IKB; Lenovo ideapad 720S-13ARR). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be informed regarding RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 1.08 W/kg and 1.25 W/kg, respectively. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform, notebook computer from Lenovo(Model number : Lenovo ideapad 320S-13IKB ; 81AK). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body conditions is 0.59 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform, notebook computer from Lenovo(Model number : Lenovo ideapad 320S-13IKB ; 81AK). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body conditions is 1.18 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousClass II Permissive Change : This change is to add new portable platform, notebook computer from Lenovo(Model number : Lenovo ideapad 320S-13IKB ; 81AK). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. End-users must be informed regarding RF exposure compliance. The highest reported SAR values for body conditions is 0.055 W/kg. Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousLimited Single Modular Approval. Power listed is maximum power conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Limited Modular Approval. Adding portable use in Lenovo Notebook Model: TP00083A. This device must not be co-located with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR value is 0.39 W/kg.
variousLimited Single Modular Approval. Power listed is maximum power conducted. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes. Class II Permissive Change: Limited Modular Approval. Adding portable use in Lenovo Notebook Model: TP00083A. This device must not be co-located with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission exposure conditions are 1.18 W/kg and 1.31 W/kg, respectively.
variousLimited Single Modular Approval. Power listed is maximum power conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Limited Modular Approval. Adding portable use in Lenovo Notebook Model: TP00083A. This device must not be co-located with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
variousLimited Single Modular Approval. Power listed is maximum power conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Limited Modular Approval. Adding portable use in Lenovo Notebook Model: TP00084A. This device must not be co-located with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures.
variousLimited Single Modular Approval. Power listed is maximum power conducted. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes. Class II Permissive Change: Limited Modular Approval. Adding portable use in Lenovo Notebook Model: TP00084A. This device must not be co-located with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.86 W/kg and 0.99 W/kg, respectively.
variousLimited Single Modular Approval. Power listed is maximum power conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. Class II Permissive Change: Limited Modular Approval. Adding portable use in Lenovo Notebook Model: TP00084A. This device must not be co-located with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported SAR value is 0.12 W/kg.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Fixed outdoor applications for point to multipoint operations are subject to the conditions in Part 15.407(a)(1)(i). Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80MHz bandwidth modes.
variousSingle Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes.
variousIs there an equipment authorization waiver associated with this application?No
variousIf there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
various Firm Name DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
various A Test Lab Techno Corp.
various Sporton International Inc.
various BTL Inc.
various Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
various DEKRA Testing and Certification (Suzhou) Co., Ltd.
various SPORTON International Inc.
various SGS-CSTC Standards Technical Services Co., Ltd
various Shenzhen BALUN Technology Co., Ltd.
various Compliance Certification Services, Inc.
various SGS Taiwan Ltd.
various East China Institute of Telecommunications
various Compliance Certification Services (Kunshan) Inc.
various Shenzhen BALUN Technology Co.,Ltd.
various Compliance Certification Services (KunShan) Inc.
various Name M******** L********
various F****** L********
various A******** C********
various S**** H********
various A******** C****
various E****** L********
various J******** X****
various K******** X****
various H****** Q********
various S****** J******
various M******** C****
various R****** W******
various Z****** Z****
various X******** W********
various K****** C******
various Telephone Number +886-******** Extension:
various 886-3********
various 886-3********
various +86-7******** Extension:
various 88633********
various +886-********
various 86 51********
various 886-3******** Extension:
various +86 (********
various 086-7********
various 886-3******** Extension:
various +886-********
various + 86-******** Extension:
various +886-******** Extension:
various 86-21********
various 86-51********
various 86-75********
various 88633******** Extension:
various Fax Number +886-********
various 886-3********
various +886-********
various +886-********
various 886-3********
various 886-3********
various +886-********
various 86-51********
various 86-75********
various 88633********
various E-mail m******@dekra.com
various f******@atl-lab.com.tw
various a******@sporton.com.tw
various S******@newbtl.com
various e******@tw.bureauveritas.com
various j******@dekra.com
various K******@sgs.com
various q******@baluntek.com
various s******@sporton.com.tw
various J******@ccsrf.com
various R******@sgs.com
various z******@ecit.org.cn
various e******@tw.ccsemc.com
various x******@baluntek.com
various k******@tw.ccsemc.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C CC 2402 2480 0.004
1 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15E CC 5180 5240 0.066
3 2 15E CC 5260 5320 0.067
3 3 15E CC 5500 5720 0.067
3 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15C CC 2402 2480 0.004
5 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15E CC 5180 5240 0.066
6 2 15E CC 5260 5320 0.067
6 3 15E CC 5500 5720 0.067
6 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
7 1 15C CC 2402 2480 0.004
7 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
8 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
9 1 15E CC 5180 5240 0.066
9 2 15E CC 5260 5320 0.067
9 3 15E CC 5500 5720 0.067
9 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
10 1 15E CC 5180 5240 0.066
10 2 15E CC 5260 5320 0.067
10 3 15E CC 5500 5720 0.067
10 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
11 1 15C CC 2402 2480 0.004
11 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
12 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
13 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
14 1 15C CC 2402 2480 0.004
14 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
15 1 15E 38 CC 5180 5240 0.066
15 2 15E 38 CC 5260 5320 0.067
15 3 15E 38 CC 5500 5720 0.067
15 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
16 1 15E CC 5180 5240 0.066
16 2 15E CC ND 5269 5320 0.067
16 3 15E CC ND 5500 5720 0.067
16 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
17 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
18 1 15C CC 2412 2472 0.079
18 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
19 1 15C CC 2412 2472 0.079
19 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
20 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
21 1 15E CC 5180 5240 0.066
21 2 15E CC ND 5260 5320 0.067
21 3 15E CC ND 5500 5720 0.067
21 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
22 1 15C CC 2402 2480 0.004
22 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
23 1 15E CC 5180 5240 0.066
23 2 15E CC 5260 5320 0.067
23 3 15E CC 5500 5720 0.067
23 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
24 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
25 1 15E CC 5180 5240 0.066
25 2 15E CC ND 5260 5320 0.067
25 3 15E CC ND 5500 5700 0.067
25 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
26 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
27 1 15C CC 2402 2480 0.004
27 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
28 1 15E CC 5180 5240 0.066
28 2 15E CC ND 5260 5320 0.067
28 3 15E CC ND 5500 5720 0.067
28 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
29 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
30 1 15C CC 2402 2480 0.004
30 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
31 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
32 1 15C CC 2402 2480 0.004
32 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
33 1 15E CC 5180 5240 0.066
33 2 15E CC 5260 5320 0.067
33 3 15E CC 5500 5720 0.067
33 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
34 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
35 1 15C CC 2412 2472 0.079
35 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
36 1 15E 38 CC 5180 5240 0.066
36 2 15E 38 CC 5260 5320 0.067
36 3 15E 38 CC 5500 5720 0.067
36 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
37 1 15C CC 2412 2472 0.079
37 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
38 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
39 1 15E CC 5180 5240 0.066
39 2 15E CC 5260 5320 0.067
39 3 15E CC 5500 5720 0.067
39 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
40 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
41 1 15E 38 CC 5180 5240 0.066
41 2 15E 38 CC ND 5260 5320 0.067
41 3 15E 38 CC ND 5500 5720 0.067
41 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
42 1 15C CC 2402 2480 0.004
42 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
43 1 15C CC 2412 2472 0.079
43 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
44 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
45 1 15E CC 5180 5240 0.066
45 2 15E CC 5260 5320 0.067
45 3 15E CC 5500 5720 0.067
45 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
46 1 15E CC 5180 5240 0.066
46 2 15E CC 5260 5320 0.067
46 3 15E CC 5500 5720 0.067
46 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
47 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
48 1 15C CC 2412 2472 0.079
48 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
49 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
50 1 15E CC 5180 5240 0.066
50 2 15E CC 5260 5320 0.067
50 3 15E CC 5500 5720 0.067
50 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
51 1 15C CC 2402 2480 0.004
51 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
52 1 15C CC 2412 2472 0.079
52 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
53 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
54 1 15E CC 5180 5240 0.066
54 2 15E CC 5260 5320 0.067
54 3 15E CC 5500 5720 0.067
54 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
55 1 15E CC ND 5180 5240 0.066
55 2 15E CC ND 5260 5320 0.067
55 3 15E CC ND 5500 5720 0.067
55 4 15E CC ND 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
56 1 15C CC 2412 2472 0.079
56 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
57 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
58 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
59 1 15C CC 2412 2472 0.079
59 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
60 1 15E CC 5180 5240 0.066
60 2 15E CC ND 5260 5320 0.067
60 3 15E CC ND 5500 5720 0.067
60 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
61 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
62 1 15E CC 5180 5240 0.066
62 2 15E CC 5260 5320 0.067
62 3 15E CC 5500 5720 0.067
62 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
63 1 15C CC 2412 2472 0.079
63 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
64 1 15C CC 2412 2472 0.079
64 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
65 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
66 1 15E CC 5180 5240 0.066
66 2 15E CC 5260 5320 0.067
66 3 15E CC 5500 5720 0.067
66 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
67 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
68 1 15E 38 CC 5180 5240 0.066
68 2 15E 38 CC 5260 5320 0.067
68 3 15E 38 CC 5500 5720 0.067
68 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
69 1 15C CC 2412 2472 0.079
69 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
70 1 15E 38 CC 5180 5240 0.066
70 2 15E 38 CC 5260 5320 0.067
70 3 15E 38 CC 5500 5720 0.067
70 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
71 1 15C CC 2402 2480 0.004
71 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
72 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
73 1 15C CC 2402 2480 0.004
73 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
74 1 15E 38 CC 5180 5240 0.066
74 2 15E 38 CC 5260 5320 0.067
74 3 15E 38 CC 5500 5720 0.067
74 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
75 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
76 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
77 1 15C CC 2402 2480 0.004
77 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
78 1 15E 38 CC 5180 5240 0.066
78 2 15E 38 CC ND 5260 5320 0.067
78 3 15E 38 CC ND 5500 5720 0.067
78 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
79 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
80 1 15C CC 2412 2472 0.079
80 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
81 1 15E CC 5180 5240 0.066
81 2 15E CC 5260 5320 0.067
81 3 15E CC 5500 5720 0.067
81 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
82 1 15E CC 5180 5240 0.066
82 2 15E CC ND 5260 5320 0.067
82 3 15E CC ND 5500 5720 0.067
82 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
83 1 15E 38 CC 5180 5240 0.066
83 2 15E 38 CC 5260 5320 0.067
83 3 15E 38 CC 5500 5720 0.067
83 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
84 1 15C CC 2402 2480 0.004
84 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
85 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
86 1 15C CC 2402 2480 0.004
86 2 15C CC 2412 2467 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
87 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
88 1 15C CC 2402 2480 0.004
88 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
89 1 15E 38 CC 5180 5240 0.066
89 2 15E 38 CC 5260 5320 0.067
89 3 15E 38 CC 5500 5720 0.067
89 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
90 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
91 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
92 1 15E CC 5180 5240 0.066
92 2 15E CC 5260 5320 0.067
92 3 15E CC 5500 5720 0.067
92 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
93 1 15C CC 2412 2462 0.079
93 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
94 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
95 1 15C CC 2412 2462 0.079
95 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
96 1 15C CC 2412 2462 0.079
96 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
97 1 15E CC 5180 5240 0.066
97 2 15E CC 5260 5320 0.067
97 3 15E CC 5500 5720 0.067
97 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
98 1 15E CC 5180 5240 0.066
98 2 15E CC 5260 5320 0.067
98 3 15E CC 5500 5720 0.067
98 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
99 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
100 1 15E 38 CC 5180 5240 0.066
100 2 15E 38 CC 5260 5320 0.067
100 3 15E 38 CC 5500 5720 0.067
100 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
101 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
102 1 15C CC 2412 2472 0.079
102 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
103 1 15C CC 2402 2480 0.004
103 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
104 1 15E CC 5180 5240 0.066
104 2 15E CC 5260 5320 0.067
104 3 15E CC 5500 5720 0.067
104 4 15E CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
105 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
106 1 15C CC 2412 2462 0.079
106 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
107 1 15E 38 CC 5180 5240 0.066
107 2 15E 38 CC 5260 5320 0.067
107 3 15E 38 CC 5500 5720 0.067
107 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
108 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
109 1 15C CC 2412 2472 0.079
109 2 15C CC 2402 2480 0.004
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
110 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
111 1 15E 38 CC 5180 5240 0.066
111 2 15E 38 CC 5260 5320 0.067
111 3 15E 38 CC 5500 5720 0.067
111 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
112 1 15C CC 2402 2480 0.004
112 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
113 1 15E 38 CC 5180 5240 0.066
113 2 15E 38 CC ND 5260 5320 0.067
113 3 15E 38 CC ND 5500 5720 0.067
113 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
114 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
115 1 15C CC 2402 2480 0.004
115 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
116 1 15E 38 CC 5180 5240 0.066
116 2 15E 38 CC 5260 5320 0.067
116 3 15E 38 CC 5500 5720 0.067
116 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
117 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
118 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
119 1 15E 38 CC 5180 5240 0.066
119 2 15E 38 CC 5260 5320 0.067
119 3 15E 38 CC 5500 5720 0.067
119 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
120 1 15C CC 2402 2480 0.004
120 2 15C CC 2412 2472 0.079
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
121 1 15C CC 2402.00000000 2480.00000000 0.0060000
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
122 1 15E 38 CC 5180 5240 0.066
122 2 15E 38 CC 5260 5320 0.067
122 3 15E 38 CC 5500 5720 0.067
122 4 15E 38 CC 5745 5825 0.066
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
123 1 15C CC 2412 2472 0.079
123 2 15C CC 2402 2480 0.004

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC