MR1052 Animal Tag Reader User Menual 1 Product Overview This product is mainly used for animal tag ID reader. It can read any work based on ISO11784 / 5 protocol animals TAGs. Product appearance, shape see picture 1. Picture 1: MR1052 appearance, shape 2 Technical parameters Table 1 Frequency Battery Work Current IDL Current Power-down Current Charging current Charging indication Read Range Read indication LCD size Dimensions 134.2KHz Li-ion3.7VDC,120mAH 60mA 20mA 10uA 200mA, @5VDC Red LED in charging. Green LED when complete. 60mm BeepBlue LEDLCD indication 1.0412832pix 1093414mm 3 Operation 3.1 Power On 3.2 Power Off Push the Button, the Key Reader power on. LCD display Welcome!
Pocket Reader. The Key Reader will auto power off in the absence of any action. But, except that the Key Reader is connecting to PC by a cable line. 3.3 Set language When The Key Reader is power down, push the Button 3 ~ 5 seconds, enter to setting language mode, and the language will scroll on the LCD. Each language will remain 2 seconds on the screen. When the language you want to setting, just push the Button key, then Key Reader will use the setting when next power on. 3.4 Charge Directly connected to the PC by USB cable, the Key Reader will Red LED light when in charging, Green LED light when charge charging automatically. complete. When Li-ion is low power, the Key Reader may not read any tags, or can read tag in a very short distance, screen light weekly. 3.5 Identification Push Button key, scan tag in 20 seconds. When identify a tag, LCD display as follow:
Or display as picture 2 if scan no tag:
ccc --- country code, xxxxxxxxxx --- UID. ccc xxxxxxxxxxxx Picture 1 No Tag Found!
Picture 2 Note: In the process of identifying, the LCD is off, and the blue LED is blinking until the reader identification to a tag. 3.6 See ID by hyperterminal Directly connected to the PC by USB cable. Open hyperterminal, use the setting as follow:
Give a name:
Key Reader. Choose the COM that you connected to the Picture 3 Picture 4 Choose icon. Baud rate:
9600bps bit:
Data 8bit parity checking:
none Stop bit: 1bit Data flow control:
none Picture 5 Push Button key, and read a tag, see the data from hyperterminal. Country code and UID is here. Picture 6 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. interference that may cause undesired operation. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the radio instructions, may cause harmful communications. However, there that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
interference is no guarantee to
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.