JENSEN 2 Ic30RF How to Install and Operate the Intellicar IC30RF Radio Frequency Remote Control IGiaD joer 0 Hio |e, aN iC3ORF Ge RF Remote Module Wefcome!
Thank you for choosing a Jensen product, For best results, read all of the instructions before you begin installation or operation. Warranty Service if your Jensen product should aver require service, you will need to have the original dated receipt. if you ever need to return the unit for any reason, always include the receipt wilh the product. ee installation Before You Begin Before proceeding with the installation, make sure you have the following:
* IC30RF transmitter ~ hand held remote IC30RF receiver small module to connact to the bus Overview The IC30RF will operate the Jensen Intellicar system only. It uses a proprietary data bus that is exclusive to all Jensen Intellicar products. if desired, purchase an additional 5-meter extension cable (ICSMCABLE) to position the module in a more favorable location. Installation Location For best reception, install the remote transmitter under a seat or in the trunk area away from metal surroundings. If the remote transmitter is installed in-dash, position the antenna away from any metal surfaces. An inch or so of clearance between a metal surface and the antenna can make quite a difference. Wiring The Intellicar bus includes all power and audio signals in one easy to use 13-pin DIN cabie. Before connecting anything to the bus make sure the head unit power is OFF. Plug the
{C30RF module into the Intellicar bus. When a module is connected to the bus, and the power is turned ON, the head unit will display an icon indicating that the module was detected, recognized and is receiving power. Mounting The IC30RF receiver can be mounted using the screw tabs provided or by using double-stick tape or Velcro. FA Operation Please refer to the head unit's operation manual for complete instructions on how to operate the IC30RF Remote Contral. Ey Technical Assistance For technical assistance call 1-800-323-0221. Before calling, make sure all cable connections are correct and secure. Note:
audio output.
[f multiple headphones are connected to the IC8010, all headphones receive the same Source Audio 20
~ dd EXHIBIT # : /Y 5724E0P.p65 18 Limited One Year Warranty-'
Length of Warranty, This warranty from Recoton Mobile Electronics shall be in effect for a period of one year from the date of the first consumer purchase. Persons Protected. This warranty will be enforceable by the original owner and any subsequent owners during the warranty period so long as proof of date of purchase from an authorized Jansen dealar is presented whenever warranly secvies is required. What is C d. Except as otnerwise specified balow, this ly covers:
all defects in maternal and workmanship in this product. The following ara not covered: damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect jine voltage, unauthorized repair or failure to follow instructions supplied with the product; damage occurring during shipment (claims must be presented to the carrer); elimination of car static or other electrical interferences; any product purchased outside USA or Canada, er on which the seria! number has been defaced, modified or removed. How You Can Get Service. 2 U.S. Purchasers. Please telephone Jensen 1-800-323-4818. We will aither inform you of the name and address of an authorized Jensen repair station which will service the product or will advise you to send the product to a factory service center. JE!
Recoton M A Division of Rec A RECOT 1090 Err Lake Mar 2000 Recot External Audio/Video sources connected to the 1C8010 through an Audio/Video Selector. A primary source (AM/FM/CD/CDC/AUX or the A/V mode) currently selected on the head unit. When Source Audio is selected using the A/V button, the selected primary source will be heard through the wireless headphones. an 11/01/00, 11:23 AM