p U d o F
. 4 l p U d o F
. 3 l 2. Fold Back 1. Fold Back TripleGuard Leak Detector Installer Guide Product 97718 Leak Detector Installation 1. Open the battery housing cover by sliding it down. 2. Remove the cover and expose the battery housing to insert batteries. 3. Insert the batteries. 4. Close the battery housing cover. 5. Place the Leak Detector at a height where only the electrodes are in contact with water during a leak. 6. Fix the Detector to the wall using the double-sided adhesive tape. The bottom part might be fixed using two screws (not included). 7. After the installation, check that the LED indicator is visible. Leak Detector LED Behavior RED flashes every 10 seconds water leak detection GREEN flashes every 30 seconds OK BLUE flashes every 30 seconds communication problems RED flashes every 30 seconds low battery Leak Detector Buzzer Behavior In case of a leak, the buzzer will sound every 10 seconds. System Installation TripleGuard devices are installed and activated using the TripleGuard Leak Detector App available on AppStore and Google Play. This Water Leak Detector is designed for internal use only and should be installed by an authorized plumber. Warranty Instructions Please visit www.rectorseal.com/tripleguard-support for warranty, technical support, terms, and conditions or troubleshooting. RectorSeal, LLC warrants the TripleGuard (product only) to be free of defects in workmanship, and material for a period of up to one year from date of purchase. Welcome Thank you for choosing TripleGuard. TripleGuard SMART is the ultimate IoT cloud-based system for home safety. The system is managed via an App and is designed to prevent damage due to water leakage. TripleGuard offers you total peace of mind at home or away. Please Note Please read these instructions carefully and follow the systems installation and commissioning steps. Maintain this document in a safe place for future reference. Contact your authorized installer with any questions. WARNING! This product was designed to prevent water leakage damages and should be used for this purpose only. TripleGuard SMART TripleGuards line of products includes innovative battery-operated devices which enables the automated control of water valves. This unifies under the Smart Home umbrella. The TripleGuard HUB serves as a Gateway that ensures a secured communication between the system devices, TripleGuard Leak Detector cloud, and App. TripleGuard SMART integrates easily into the Smart Home IoT ecosystem, providing a unique cloud-based secured platform for Water Leak Management. TripleGuard Water Leak Detector Specification:
Part Code Product Description Dimensions Weight Power Supply Operation Voltage Battery Life Span Operating RF Transmission Range Certifications Working Temperature 97710 The wireless and battery-operated Water Leak Detector is installed in places where high chance of water leak may occur. Whenever water is detected, an automatic command is sent to the TripleGuard HUB. Body: 2.56 x 1.57 x 5.51 inches (6.5 x 3.99 x 14 cm) Electrodes: 1.34 x 0.63 x 0.43 inches (34 x 16 x 11 mm) Cable length: 1 feet (30 cm) 0.24 lbs (108.86 g) 2x AAA non-rechargeable batteries 3V Up to two years. Manufacturer recommends to visually inspect batteries every year. 868/915 MHz Open space - up to 750 ft. (230 m) In enclosed space - up to 390 ft. (120 m) Avoid installing in a metal cabinet. FCC ID: 2AFOICLMFLD10 IC: 20798-CLMFLD10
-4F to +122F (-20C to +50C) Avoid Installing the Water Leak Detector in:
Metal cabinets Dusty places Where the temperature exceeds -4F to +122F (-20C and 50C) Where it can be hit or damaged Outdoor, Exposed to rain and direct sunlight High level of humidity Water Leak Detector Description A. LED indicator B. Electrodes C. Body D. Wall mounting fitting C D A B RectorSeal, the logos and other trademarks are property of RectorSeal, LLC, its affiliates or its licensors and are protected by copyright, trademark and other intellectual property laws, and may not be used without permission. RectorSeal reserves the right to change specifications without prior notice. 2018 RectorSeal. All rights reserved. R50310-0918 RectorSeal 2601 Spenwick Drive - Houston, TX 77055 800-231-3345 rectorseal.com