2. Fold Back 1. Fold Back TripleGuard HUB Installer Guide Product 97710 Batteries Installation 1. Slide down the lower cover 2. Insert 2 x AA batteries (included) 3. Slide back up the lower cover HUB Wall Installation 1. Detach the HUB from the table stand as shown here below 2. Attach the wall mounting bracket to its location and mark the holes for the mounting screws 3. Place the HUBs rear mounting pins close to the wall and gently slide down the wall mount dimples 3 2 1 WARNING! Do not attempt to rotate the HUB on the mounting to avoid physical damage to the enclosure. HUB Table Installation For table use, connect the table stand to the HUB and place it on the table. HUB LED Behavior GREEN flashes every 2 Sec OK BLUE flashes every 2 Sec Failure in communication with the TripleGuard Cloud or with any systems device RED flashes every 2 Sec Battery status of the backup batteries or one of the devices is low System Component Synchronization and Activation TripleGuard devices are installed and activated using the TripleGuard Leak Detector App available on AppStore and Google Play. This HUB is designed for internal use only and should be installed by an authorized plumber. Warranty Instructions Please visit www.rectorseal.com/tripleguard-support for warranty, technical support, terms, and conditions or troubleshooting. RectorSeal, LLC warrants the TripleGuard (product only) to be free of defects in workmanship, and material for a period of up to one year from date of purchase. p U d o F
. 4 l p U d o F
. 3 l Welcome Thank you for choosing TripleGuard. TripleGuard SMART is the ultimate IoT cloud-based system for home safety. The system is managed via an App and is designed to prevent damage due to water leakage. TripleGuard offers you total peace of mind at home or away. Please Note Please read these instructions carefully and follow the systems installation and commissioning steps. Maintain this document in a safe place for future reference. Contact your authorized installer with any questions. WARNING! This product was designed to prevent damage caused by water leaks and should be used for this purpose only. TripleGuard SMART TripleGuards line of products includes innovative battery-operated devices which enable the automated control of water valves. This unifies under the Smart Home umbrella. The TripleGuard HUB serves as a Gateway that ensures a secured communication between the system devices, TripleGuard Leak Detector cloud, and App. TripleGuard SMART integrates easily into the Smart Home IoT ecosystem, providing a unique cloud-based secured platform for Water Leak Management. TripleGuard HUB Specification:
Part Code 97710 Product Description The secured and reliable TripleGuard HUB communicates with the connected devices. Dimensions 10.24 x 2.36 x 5.71 inches (26.01 x 5.99 x 14.50 cm) Weight 1.21 lbs (548.85 g) Power Supply External Adaptor Input 110-240 V AC Operation Voltage 5V (2x AA back up batteries. Up to 8 hours.) Manufacturer recommends to visually inspect batteries every year. Operating RF 868/915 MHz Transmission Range Open space - Up to 750 ft (230 m) In enclosed space - up to 390 ft (119 m) Avoid installing in a metal cabinet. Working Temperature
-4F to +122F (-20C to +50C) Certifications FCC ID: 2AFOICLMCTRL10 IC: 20798-CLMCTRL10 HUB Description A. Power outlet B. Table stand C. Lower cover D. HUB E. USB connector (Optional) F. RGB LED indicator G. Wall mounting bracket (rear part) G A D F B E C RectorSeal, the logos and other trademarks are property of RectorSeal, LLC, its affiliates or its licensors and are protected by copyright, trademark and other intellectual property laws, and may not be used without permission. RectorSeal reserves the right to change specifications without prior notice. 2018 RectorSeal. All rights reserved. R50310-0918 RectorSeal 2601 Spenwick Drive - Houston, TX 77055 800-231-3345 rectorseal.com