REDLINK installation guide INSTALLATION GUIDE REVISIONS V1.0.0 DISCLAIMER RED has made every effort to provide clear and accurate information in this Operation Guide, which is provided solely for the users information. While thought to be accurate, the information in this document is provided strictly as is and RED will not be held responsible for issues arising from typographical errors or users interpretation of the language used herein that is different from that intended by RED. All safety and general information is subject to change as a result of changes in local, federal or other applicable laws. RED reserves the right to revise this Operation Guide and make changes from time to time in the content hereof without obligation to notify any person of such revisions or changes. In no event shall RED, its employees or authorized agents be liable to you for any damages or losses, direct or indirect, arising from the use of any technical or operational information contained in this document. For comments or questions specifically about the Operations Guide content, please send a detailed message to OpsGuides@red.com. COPYRIGHT NOTICE 2012 Red.com, Inc. All trademarks, trade names, logos, icons, images, written material, code, and product names used in association with the accompanying product are the copyrights, trademarks or other intellectual property owned and controlled exclusively by Red.com, Inc. TRADEMARK DISCLAIMER All other company, brand and product names are trademarks or registered trademarks of their respective holders. RED has no affiliation to, is not associated or sponsored with, and has no express rights in third- party trademarks. Compliance INDUSTRY CANADA COMPLIANCE STATEMENTS This device complies with Industry Canada license-exempt RSS standards RSS 139 and RSS 210. Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. FEDERAL COMMUNICATION COMMISSION (FCC) COMPLIANCE STATEMENTS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the users authority to operate this equipment. Note: This device complies with Part 15 of the FCC Rules Operations subjected to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including that may cause undesirable interference. Caution: Exposure to Radio Frequency Radiation. The device shall be used in such a manner that the potential for human contact is minimized This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Caution: Regulations of the FCC and FAA prohibit airborne operation of radio-frequency wireless devices because there signals could interfere with critical aircraft instruments. Caution: If the device is changes or modified without permission from RED, the user may void his or her authority to operate the equipment. AUSTRALIA AND NEW ZEALAND COMPLIANCE STATEMENTS RED declares that the radio equipment described in this document comply with the following international standards. IEC 60065 - Product Safety ETSI EN 300 328 - Technical requirement for radio equipment RED declares digital devices described in this document comply with the following Australian and New Zealand standards. AS/NZS CISPR 22 Electromagnetic Interference AS/NZS 61000.3.2 Power Line Harmonics AS/NZS 61000.3.3 Power Line Flicker EUROPEAN UNION COMPLIANCE STATEMENTS RED declares that the radio equipment described in this document comply with the R&TTE Directive
(1999/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards). EN 60065 (IEC 60065) Product Safety ETSI EN 300 328 Technical requirement for radio equipment ETSI EN 301 489 General EMC requirements for radio equipment. Information Products with the CE marking comply with the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Product Family Standards. EN 55022 (CISPR 22) Electromagnetic Interference EN 55024-1 (CISPR 24) Electromagnetic Immunity EN 61000-3-2 (IEC610000-3-2) Power Line Harmonics EN 61000-3-3 (IEC610000) Power Line Flicker EN 60065 (IEC60065) Product Safety Usage Restrictions for Products that Incorporate REDlink Products that fall into this category are denoted by inclusion of the Class 2 identifier symbol
(exclamation mark in a circle) accompanying the CE Mark on the products regulatory label, example below:
FRANCE Usage Restrictions - Geographic Area Where Restriction Applies : France For mainland France 2.400 - 2.4835 GHz (Channels 1-16) authorized for indoor use 2.400 -2.454 GHz (Channels 1-10) authorized for outdoor use For Guiana and Reunion 2.400 - 2.4835 GHz (Channels 1-16) authorized for indoor use 2.420 - 2.4835 GHz (Channels 4-16) authorized for outdoor use Restrictions d'utilisation - Zone gographique o les restrictions s'appliquent : France Pour la France mtropolitaine 2.400 - 2.4835 GHz (Canaux 1 16) autoris en usage intrieur 2.400 -2.454 GHz (canaux 1 10) autoris en usage extrieur Pour la Guyane et la Runion 2.400 - 2.4835 GHz (Canaux 1 16) autoris en usage intrieur. 2.420 - 2.4835 GHz (canaux 4 16) autoris en usage extrieur ITALY This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy. Unless operating within the boundaries of the owner's property, the use of this 2.4 GHz Wireless LAN product requires a `general authorization'. Please check with http://www.sviluppoeconomico.gov.it/ for more details. Questo prodotto conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in Italia. Se non viene installato all'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN a 2.4 GHz richiede una "Autorizzazione Generale". Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli. LATVIA The outdoor usage of the 2.4-GHz band requires an authorization from the Electronic Communications Office. Please check http://www.esd.lv for more details. ra izmantoana 2,4 GHz josl ir nepiecieama atauja no Elektronisko sakaru direkcija. Ldzu, prbaudiet http://www.esd.lv skku informciju. NORWAY This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-lesund Dette gjelder ikke for det geografiske omrdet innenfor en radius av 20 km fra sentrum av Ny-
lesund
***WEEE Symbol***
This information will stay the same as currently in the manual INSTALATION INSTRUCTIONS Install Wireless Board onto V-duct using screw holes to locate Install Antenna Assembly into Top Enclosure (108-0060-02) using insertion tool to seat Antenna Assembly onto screw bosses.