FCC ID: 2AK7R-04337 Digital Signal USB Transceiver for Entertainment System

TABLE OF CONTENTS Thank You Whats Included Chair Assembly Electronics Headphones &

Speakers Safety and Certifications 3 45 69 1011 12 13 Victory is sweeter on a throne. Game ON!

THANK YOU!

Scan this QR code for electronics setup videos and additional resources Thank you for purchasing the GT Throne!

Were confident that this immersive chair will take your gaming experience to a royally different dimensionone where the loot is always bountiful, every kill leads to a streak, and every championship and chicken dinner belongs to you. A member of our team has personally inspected your package, but if you have any questions, concerns or feedback, please let us know. If you need additional help assembling your chair and electronics, visit our resources page at www.gtthrone.com info@gtthrone.com

@GTThrone

@gtthrone 3 Chair Parts 4 Plastic Screw Covers 4 Side Cover Screws 1 Allen Key D E D U L C N I S T A H W 4 1 Plastic Base Cover (Left) 1 Plastic Base Cover (Right) 1 Seat 5 Casters 1 Plastic Side Cover (Left) 1 Plastic Side Cover (Right) 1 Base 1 Headrest Cushion 1 Lumbar Cushion 1 Hydraulic Unit Plastic Cover Electronics 1 GT Receiver FCC ID:

2AK7R-02661 1 Power Supply 1 Trip Wire 1 GT Processor FCC ID:

2AK7R-04337 6 Small Screws 1 Backrest 2 Arm Rest 1 Control Unit 1 Hydraulic Unit 1 GT Receiver Mounting Plate 1 Power Cord 5 Step 2 Install the hydraulic pump into the center of the base, with plastic cover sliding onto pump. Step 4 Line up backrest side screw holes with the seat base metal brackets. 1 Attach the wheels to the base by pushing and clicking in. Step 3 Remove backrest side screws with MS Allen key. Y L B M E S S A I R A H C Step 5 Tighten screws to secure backrest to seat base. Step 7 Attach the metal mounting plate to the GT receiver with the 4 small screws included with the mounting plate. Step 6 Fix the plastic covers to the sides of the metal brackets. Attach the seat covers first, then click the side covers into the seat cover. Step 8 Line up one armrest bracket to the bottom 4 holes on the LEFT side. Place the GT Receivers bracket on top of the armrest. Using the MS Allen key, tighten the 4 screws with washer on the outside. 6 7 Step 9 Attach the other armrest on the RIGHT side without the GT Receiver. NOTE: the width of the armrest can be decided when screwing into the bottom of the chair Step 11 Fix the metal control unit to the base of the seat (4 screws have been fixed to the seat based prior to delivery). Assure the front arrow on the metal control unit faces outward and the control lever is on the right side of the chair. Finished!

NOTE: The height of the chair can be controlled with control lever on the right side. The recline of the chair can be controlled by loosening/tightening the knob beneath the seat. Rocking can be locked by pushing in the control lever. Step 10 Attach actuator wires to the back of the GT Receiver. The backrest actuator plugs in on the opposite side of the intensity knob. The two seat actuator wires plug into the two ports closet to the front of the chair. Step 12 Insert the hydraulic unit into the opening of the control unit. Y L B M E S S A I R A H C 8 9 Step 2 Take the GT USB Processor and plug into an open usb port on your PC. Step 1 Power your chair by plugging the power cord into the GT trip wire. Plug the GT trip wire into the GT receiver. Step 4 Once both electronics pieces are powered, they should automatically pair and both show green. If they both show red then they will need to be re-paired. Step 5 PAIRING turn both pieces on by twisting each knob clockwise. First, push the sync button on the GT Receiver followed by the GT Processor. If they both do not turn green please see our trouble shooting section on the resource page of www.gtthrone.com 10 11 The knob on the GT Receiver will control the intensity and frequency of the chairs vibration. I S C N O R T

. C E L E HEADPHONES & SPEAKERS Digital USB Headphone A headphone with a USB connection will need to be connected to a USB port on your PC. You will then need to configure your PC to use 2 audio outputs while you are using the GT Throne and a USB headset at the same time. Please see the video on the electronic set-up page at www.gtthrone.com with instructions on how to do so on Windows computers. USB DEVICE USAGE Connect USB device to computer. Once chair is powered, press the pairing button. Enjoy the experience!

CHAIR DEVICE USAGE Connect chair device to the provided power cord. Press pairing button on USB device. Enjoy the experience!

Safety and Certifications Changes or modification to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Information FCC ID:2AK7R-02661 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20 cm during normal operation. RF Exposure Information FCCID: 2AK7R-04337 This equipment complies with FCC radiation exposure for SAR exclusion limits. This device complies with the SAR exclusion limits at 5mm. Contact Information RedSeat Entertainment, LLC. 6440 South Wasatch Blvd. Ste 105 Holladay, Utah 84121

(801)268-4331 www.gtthrone.com This device complies with Part 15 of the FCC Rules and this device also contains license-exempt transmitter(s)/receiver(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment is not in direct contact with the body of the user under normal operating conditions. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC ID: 2AK7R-02661 FCC ID: 2AK7R-04337 This FCC ID number is only located in this manual and on the packaging, not on the device itself. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the device, thus reorienting the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced technician for help

FCC Label Placement Pursuant to FCC Part 2.925 paragraph (f) The FCC Identifier including the term FCC ID shall be in a size of type large enough to be readily legible, consistent with the dimensions of the equipment and its label. However, the type size for the FCC Identifier is not required to be larger than eight-point. If a device is so small that it is impractical to label it with the FCC Identifier in a font that is four-point or larger, and the device does not have a display that can show electronic labeling, then the FCC Identifier shall be placed in the user manual and must also either be placed on the device packaging or on a removable label attached to the device. The FCC Identifier is placed on the packaging and in the User Manual. Figure 1 - FCC Identifier on packaging From page 8 of the User Manual:

FCC ID: 2AK7R-04337 This FCC ID number is only located in this manual and on the packaging, not on the device itself.

G@ 6440 South Wasatch Blvd. Ste. 105 cine REDSEAT Holladay, Utah 84121 (801)268-4331 ENTERTAINMENT eae OW. WEBSITE _ www.tremorfx.com Authority to Act as Agent Date: September 22, 2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

Les Payne of DNB Engineering, Inc. is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: 11/9/2023

(Signature!) (Print name) Title: lak Al ag Cr On behalf of: Ledl Seat Fiderk Mey

(Company Name) Telephone: ($0!) jit - 453

'- Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

"High Frequency Ceramic Solutions"

2.4GHz Mini Antenna, SMT 7/9/2018 Detail Specification:

Let us help you with the antenna design, optimization, and tuning!

P/N 2450AT18A100 Page 1 of 5 General Specifications Part Number 2450AT18A100 Frequency (MHz) 2400 - 2500 Avg. Rad Efficiency*

Peak Gain (dBi typ.) Average Gain (dBi typ.) 76%

0.5

-0.5 Return Loss (dB) 9.5 min. Impedance Input Power 50 2 Watts max. (CW)

*Efficiency based on Johanson's standard evaluation board Part Number Explanation Storage Period Storage Temperature Operating Temperature Reel Quantity 18 months max.

-40 to +125C

-40 to +125C 3000 P/N Suffix Packing Style Evaluation Board Suffix = S Bulk (loose) Suffix = E T & R Suffix = E or S 100% Tin 2450AT18A100-EBSMA (see page 2&3 for details) e.g. 2450AT18A100S e.g. 2450AT18A100E e.g. 2450AT18A100(E or S) Mechanical Dimensions L W T a In 0.126 0.063 0.008 0.008 mm 3.20 1.60 0.2 0.2 0.051

+.004/-.008 1.30

+0.1/-0.2 0.020 0.012 0.50 0.3 Terminal Configuration No. 1 2 Function FEED NC a T W L Want the layout file? Request it at: www.johansontechnology.com/ask-a-question Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved

"High Frequency Ceramic Solutions"

2.4GHz Mini Antenna, SMT Detail Specification:

7/9/2018 P/N 2450AT18A100 Page 2 of 5 Mounting Considerations 1: Evaluation Board 50 Feed Line

) 13.5mm 6.5mm GND Antenna NO GND 39.5mm 4mm 6.5mm Units in mm Matching Component JTI P/Ns:

L-14C2N7JV4 L-14C2N2JV4 1.0pF 2.6 3.9nH 1.6

2.7nH

) 4.2 1.9 0.4 JTI P/N for Matching Circuit: Cap

(1.0pF): 500R07S1R0BV4T Inductor (2.7nH): L-07C2N7SV6T Inductor (3.9nH): L-07C3N9SV6T To order a pre-tuned 50 EVB with a female SMA connector click here: www.johansontechnology.com/request-a-sample Reference p/n: 2450AT18A100-EBSMA Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved

"High Frequency Ceramic Solutions"

2.4GHz Mini Antenna, SMT Detail Specification:

7/9/2018 P/N 2450AT18A100 Page 3 of 5 Mounting Considerations 1: Typical Electrical Performance (T=25C) Return Loss with matching circuit @ +25C VSWR with matching circuit @ +25C and +125C Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved

"High Frequency Ceramic Solutions"

2.4GHz Mini Antenna, SMT Detail Specification:

7/9/2018 P/N 2450AT18A100 Page 4 of 5 Mounting Considerations 1: Antenna Performance Typical 2D radiation patterns @ 2.44GHz Z (0) YZ cut @2.45GHz Vertical Horizontal YZ-plane Y Z XZ cut @2.45GHz Vertical Horizontal X (0) XZ-plane XY cut @2.45GHz Vertical Horizontal X (0) XY-plane Y Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved

"High Frequency Ceramic Solutions"

2.4GHz Mini Antenna, SMT Detail Specification:

7/9/2018 P/N 2450AT18A100 Page 5 of 5 Antenna tuning, optimization, and validation services:

www.johansontechnology.com/ipc-antenna-services For more antennas and to download measured S-parameters, go to:

www.johansontechnology.com/antennas Soldering Information MSL Info Packaging information www.johansontechnology.com/ipcsoldering-profile www.johansontechnology.com/msl-rating www.johansontechnology.com/tape-reel-packaging For layout review contact our Applications Team at:

www.johansontechnology.com/ask-a-question RoHS Compliance www.johansontechnology.com/rohs-compliance Need help designing the antenna in? Use our antenna design services!

www.johansontechnology.com/ipc-antenna-services We provide 2 free layout reviews and if you need us to tune and characterize the antenna on your product (inside anechoic chamber) we can do that too. Small lab fee may apply for the latter. Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. www.johansontechnology.com 4001 Calle Tecate Camarillo, CA 93012 TEL 805.389.1166 FAX 805.389.1821 Ver. 3.0 2018 Johanson Technology, Inc. All Rights Reserved

Date: 16 Sep 2023 Subject: Confidentiality Request for: 2AK7R-04337 Request for Confidentiality Pursuant to FCC 47 CFR 0.457(d) and 0.459 and/or IC RSP-100, Section 12.4, the applicant requests that a part of the subject application(s) be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Exhibit Permanent Block Diagrams

--------------------------- External Photos Permanent *1 Internal Photos Permanent Operation Description/Theory of Operation Permanent Parts List & Placement/BOM Permanent Tune-Up Procedure Permanent Schematics

--------------------------- Test Setup Photos Permanent *1 Users Manual ______RedSeat Entertainment LLC______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality for FCC Applications:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __ (specify number of days not to exceed 180)2___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Short Term Confidentiality for Industry Canada Applications:

Starting May 2022, ISED will recognize short term confidentiality on certain exhibits until the intended date of marketing. The applicant requests the exhibits selected above as short term confidential be withheld from public view until: (specify ISED expiration date / date of marketing) . Sincerely, By:

(Signature/Title3) _Agent for RedSeat Entertainment__ _C.L. P(Les) Payne III__________

(Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to https://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead. 050222-17

16 Sep 2023 Atten: Director of Certification American Certification Body, Inc. 6731 Whittier Avenue, Suite C110 McLean, VA 22101 To Whom It May Concern RedSeat Entertainment LLC is submitting the following product which shall contain an unlicensed DTS radio transmitting device subject to US CFR 47 Part 15.247 Rules and Regulations and shall bear the following in accordance to the requirements:

FCC ID: 2AK7R-04337 Part Number: 04337 Description: USB Transceiver Les Payne (Agent for RedSeat Entertainment LLC) Facility Manager DNB Engineering Inc 1100 E Chalk Creek Road Coalville, UT 84017

(Ga 6440 South Wasatch Blvd. Ste. 105

= PHONE REDSEA Holladay, Utah 84121 (801)268-4331 DSEAT Salt Lake City WEBSITE www.tremorfx.com Certification Application Attestation Statements Date: June 6, 2023 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) RedSeat Entertainment, LLC certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment! prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Statement for 47 CFR section 2.911(d)(5)(ii) RedSeat Entertainment, LLC (the applicant) certifies that, as of the date of the filing of this application, the applicant O - is IX - is not identified on the Covered List as an entity producing covered equipment. Thank you, By: LA NSen

(Sign4ture) (Print name) Title: Man ELS Company: he i Sat Ent Cr temcat Telephone: o| 26y- 48 3 /

1_ The Commissions is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. pane PW TOO OVI SUD DI VCH at COVEFEGIIST . 2. Letters must be piaced on appropriate ietternead. 022423-17 rev 6

6440 South Wasatch Blvd. Ste. 105

&7 PHONE Holladay, Utah 84121 (801)268-4331 eS ESE os [ENT Salt Lake City WEBSITE www.tremorfx.com U.S. Agent Designation for Service of Process

(Applicant is Both Grantee and U.S. Agent) TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant Company name: RedSeat Entertainment, LLC FRN #: 0026273516 Grantee Code: 2AK7R Contact Name: Tim Hansen Street Address: 6440 South Wasatch Blvd. Ste. 105 City/Province/Zip: Holladay, Utah 84121 Telephone No: (801) 268-4331 Email: thansen@endeavorcap.net Applicant Signature: Avice Che ee Date: Z/lo/ze >

Signed by (Printed Name/Title): Vine Hav, sca ie Mau agey 2 - Letters must be placed on appropriate letterhead. 022423-17 Rev 6