app
s
|
Applicant Information
|
|
1 2 3 4 5 6 7 8
|
Effective |
2022-04-26
|
1 2 3 4 5 6 7 8
|
2022-04-21
|
1 2 3 4 5 6 7 8
|
Applicant's complete, legal business name |
Reliance Communications LLC
|
1 2 3 4 5 6 7 8
|
FCC Registration Number (FRN) |
0007419963
|
1 2 3 4 5 6 7 8
|
Physical Address |
91 Colin Drive, Unit 1
|
1 2 3 4 5 6 7 8
|
HOLBROOK, NY
|
1 2 3 4 5 6 7 8
|
United States
|
|
app
s
|
TCB Information
|
1 2 3 4 5 6 7 8
|
TCB Application Email Address |
b******@phoenix-testlab.de
|
1 2 3 4 5 6 7 8
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
1 2 3 4 5 6 7 8
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
app
s
|
FCC ID
|
1 2 3 4 5 6 7 8
|
Grantee Code |
2ABGH
|
1 2 3 4 5 6 7 8
|
Equipment Product Code |
RC116LCB
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2 3 4 5 6 7 8
|
Name |
S**** G********
|
1 2 3 4 5 6 7 8
|
Telephone Number |
631-2********
|
1 2 3 4 5 6 7 8
|
Fax Number |
631-2********
|
1 2 3 4 5 6 7 8
|
E-mail |
s******@reliance.us
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 3 4 5 6 7 8 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
1 2 3 4 5 6 7 8 | No |
1 2 3 4 5 6 7 8 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 3 4 5 6 7 8 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 3 4 5 6 7 8 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
1 2 3 4 5 6 7 8 | DSS - Part 15 Spread Spectrum Transmitter |
1 2 3 4 5 6 7 8 | PCT - PCS Licensed Transmitter worn on body |
1 2 3 4 5 6 7 8 | DTS - Digital Transmission System |
1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 7c Modular Platform |
1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
1 2 3 4 5 6 7 8 | Modular Equipment Type | Single Modular Approval |
1 2 3 4 5 6 7 8 | Does not apply |
1 2 3 4 5 6 7 8 | Purpose / Application is for | Class II Permissive Change |
1 2 3 4 5 6 7 8 | Change in Identification |
1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 3 4 5 6 7 8 | Grant Comments | Single Modular Approval. Power listed is maximum power conducted. This device
is to be used only for mobile and fixed applications. Device operates with specific
antennas in MIMO configurations as described in this filing. This module can only
be used with the antenna design in strict compliance with the OEM instructions
provided. The module antenna(s) must be installed to meet the RF exposure
compliance separation distance of 20 cm and any additional testing and
authorization process as required. Co-location of this module with other
transmitters that operate simultaneously is required to be evaluated using the FCC
multi-transmitter procedures. OEM integrators and end-Users must be provided
with transmitter operating conditions for satisfying RF exposure compliance. This
grant is valid only when the device is sold to OEM integrators and the OEM
integrators are instructed to ensure that the end user has no manual instructions to
remove or install the device. Separate approval is required for all other operating
configurations, including portable configurations with respect to 2.1093 and
different antenna configurations. This device has 20, 40, and 80 MHz bandwidth
modes.<br>
<br>
Class II Permissive Change for device request approval for portable category
specific host, Notebook PC, Orbic model number: RC116LCB, with the antenna,
Brand name: SPEED, model name: F-0G-MA-6001-003-00 and F-0G-MA-6001-
004-00. And Brand name: WGT, model name: EGSG2WRPB01+A and
EGSG2WRPB02+A.<br>
<br>
SAR compliance for body-carry configuration is limited to provision at least 0
cm separation between the device and the user's body. The highest reported
SAR values for the body-worn and simultaneous transmission use conditions
are 0.32 W/kg and 0.69 W/kg at 1g tissues, respectively. |
1 2 3 4 5 6 7 8 | Single Modular Approval. Power listed is maximum power conducted. This device
is to be used only for mobile and fixed applications. This module can only be used
with the antenna design in strict compliance with the OEM instructions provided.
The module antenna(s) must be installed to meet the RF exposure compliance
separation distance of 20 cm and any additional testing and authorization process
as required. Co-location of this module with other transmitters that operate
simultaneously is required to be evaluated using the FCC multi-transmitter
procedures. OEM integrators and end-Users must be provided with transmitter
operating conditions for satisfying RF exposure compliance. This grant is valid only
when the device is sold to OEM integrators and the OEM integrators are instructed
to ensure that the end user has no manual instructions to remove or install the
device. Separate approval is required for all other operating configurations,
including portable configurations with respect to 2.1093 and different antenna
configurations.<br>
<br>
Class II Permissive Change for device request approval for portable category
specific host, Notebook PC, Orbic model number: RC116LCB, with the antenna,
Brand name: SPEED, model name: F-0G-MA-6001-004-00. And Brand name:
WGT, model name: EGSG2WRPB02+A.<br>
<br>
SAR compliance for body-carry configuration is limited to provision at least 1.5
cm separation between the device and the user's body. The highest reported
SAR values for the body-worn and simultaneous transmission use conditions
are < 0.10 W/kg and 1.33 W/kg at 1g tissues, respectively. |
1 2 3 4 5 6 7 8 | Single Modular Approval. Power listed is conducted. This device is to be used only
for mobile and fixed applications. This device supports LTE of 1.4, 3, 5, 10, 15 and
20 MHz bandwidth modes for Bands 2, 4, 25, and 66; LTE of 1.4, 3, 5 and 10 MHz
bandwidth modes for Bands 5 and 12; LTE of 5, 10, 15 and 20 MHz bandwidth
modes for Bands 7, 38, 41, and 71; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth
modes for Band 26; and LTE of 5 and 10 MHz bandwidth modes for Bands 13, 14,
17 and 30. This module can only be used with the antenna design in strict
compliance with the OEM instructions provided. The module antenna must be
installed to meet the RF exposure compliance separation distance of 20 cm and
any additional testing and authorization process as required. Colocation of this
module with other transmitters that operate simultaneously is required to be
evaluated using the FCC multi-transmitter procedures. OEM integrators and end-
Users must be provided with transmitter operating conditions for satisfying RF
exposure compliance. This grant is valid only when the device is sold to OEM
integrators and the OEM integrators are instructed to ensure that the end user has
no manual instructions to remove or install the device. Separate approval is
required for all other operating configurations, including portable configurations with
respect to 2.1093 and different antenna configurations. This device contains
functions that are not operational in U.S. Territories. This filing is only applicable for
U.S. operations.<br>
<br>
Class II Permissive Change for device request approval for portable category
specific host, Notebook PC, Orbic model number: RC116LCB, with the antenna,
Brand name: SPEED, model name: F-0G-MA-6001-001-00 and F-0G-MA-6001-
002-00.<br>
<br>
SAR compliance for body-carry configuration is limited to provision at least 0
cm separation between the device and the user's body. The highest reported
SAR values for the body-worn and simultaneous transmission use conditions
are 0.32 W/kg and 0.69 W/kg at 1g tissues, respectively. |
1 2 3 4 5 6 7 8 | Single Modular Approval. Power listed is maximum power conducted. This
device is to be used only for mobile and fixed applications. Device operates
with specific antennas in MIMO configurations as described in this filing. This
module can only be used with the antenna design in strict compliance with the
OEM instructions provided. The module antenna(s) must be installed to meet
the RF exposure compliance separation distance of 20 cm and any additional
testing and authorization process as required. Co-location of this module with
other transmitters that operate simultaneously is required to be evaluated using
the FCC multi-transmitter procedures. OEM integrators and end-Users must be
provided with transmitter operating conditions for satisfying RF exposure
compliance. This grant is valid only when the device is sold to OEM integrators
and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is
required for all other operating configurations, including portable configurations
with respect to 2.1093 and different antenna configurations. This device has 20,
and 40 MHz bandwidth modes.<br>
<br>
Class II Permissive Change for device request approval for portable category
specific host, Notebook PC, Orbic model number: RC116LCB, with the
antenna, Brand name: SPEED, model name: F-0G-MA-6001-003-00 and F-0GMA-
6001-004-00. And Brand name: WGT, model name: EGSG2WRPB01+A
and EGSG2WRPB02+A.<br>
<br>
SAR compliance for body-carry configuration is limited to provision at least 0
cm separation between the device and the user's body. The highest reported
SAR values for the body-worn and simultaneous transmission use conditions
are 0.32 W/kg and 0.69 W/kg at 1g tissues, respectively. |
1 2 3 4 5 6 7 8 | Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
1 2 3 4 5 6 7 8 | Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. |
1 2 3 4 5 6 7 8 | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for Bands 2, 4, 25, and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for Bands 5 and 12; LTE of 5, 10, 15 and 20 MHz bandwidth modes for Bands 7, 38, 41, and 71; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for Band 26; and LTE of 5 and 10 MHz bandwidth modes for Bands 13, 14, 17 and 30. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Colocation of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
1 2 3 4 5 6 7 8 | Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No |
1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2 3 4 5 6 7 8
|
Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
1 2 3 4 5 6 7 8
|
Shenzhen Morlab Communications Technology Co. Ltd.
|
1 2 3 4 5 6 7 8
|
Name |
M**** L********
|
1 2 3 4 5 6 7 8
|
M******** F********
|
1 2 3 4 5 6 7 8
|
Telephone Number |
+886-******** Extension:
|
1 2 3 4 5 6 7 8
|
+86 7********
|
1 2 3 4 5 6 7 8
|
Fax Number |
+886-********
|
1 2 3 4 5 6 7 8
|
E-mail |
m******@dekra.com
|
1 2 3 4 5 6 7 8
|
Z******@morlab.cn
|
|