|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6 7 8
|
Effective |
2022-08-28
|
|
1 2 3 4 5 6 7 8
|
2019-04-26
|
|
1 2 3 4 5 6 7 8
|
Applicant's complete, legal business name |
Reliance Communications LLC
|
|
1 2 3 4 5 6 7 8
|
FCC Registration Number (FRN) |
0007419963
|
|
1 2 3 4 5 6 7 8
|
Physical Address |
91 Colin Drive, Unit 1
|
|
1 2 3 4 5 6 7 8
|
555 Wireless Blvd
|
|
1 2 3 4 5 6 7 8
|
HOLBROOK, NY
|
|
1 2 3 4 5 6 7 8
|
Hauppauge, New York 11788
|
|
1 2 3 4 5 6 7 8
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6 7 8
|
TCB Application Email Address |
b******@phoenix-testlab.de
|
|
1 2 3 4 5 6 7 8
|
s******@nemko.com
|
|
1 2 3 4 5 6 7 8
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
1 2 3 4 5 6 7 8
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
1 2 3 4 5 6 7 8
|
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6 7 8
|
Grantee Code |
2ABGH
|
|
1 2 3 4 5 6 7 8
|
Equipment Product Code |
RC2200L
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6 7 8
|
Name |
S****** G********
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
631-2********
|
|
1 2 3 4 5 6 7 8
|
Fax Number |
631-2********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
s******@reliance.us
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 7 8 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 5 6 7 8 | Yes |
| 1 2 3 4 5 6 7 8 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 5 6 7 8 | Yes |
| 1 2 3 4 5 6 7 8 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 10/22/2019 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 7 8 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 7 8 | Equipment Class | DTS - Digital Transmission System |
| 1 2 3 4 5 6 7 8 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 7 8 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 5 6 7 8 | PCE - PCS Licensed Transmitter held to ear |
| 1 2 3 4 5 6 7 8 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Orbic Journey V with GSM, WCDMA, LTE, WiFi and Bluetooth |
| 1 2 3 4 5 6 7 8 | Orbic Journey V with GSM, WCDMA, LTE, WiFi and Bluetooth |
| 1 2 3 4 5 6 7 8 | Orbic Journey V with GSM, WCDMA, LTE, WiFi and Bluetooth |
| 1 2 3 4 5 6 7 8 | Cellphone |
| 1 2 3 4 5 6 7 8 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 7 8 | Modular Equipment Type | Does not apply |
| 1 2 3 4 5 6 7 8 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 4 5 6 7 8 | Original Equipment |
| 1 2 3 4 5 6 7 8 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 7 8 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 7 8 | Grant Comments | Output power listed is conducted. This device is approved for use in the handset
described in this filing. SAR compliance for body-worn operations is restricted to belt-
clips, holsters, or similar accessories that have no metallic component in the assembly
and which provide at least 1 cm separation between the device including its antenna
and the body of user. End-users must be informed of the body-worn accessory
operating requirements for satisfying RF exposure compliance. The highest reported
SAR for head, body-worn accessory, product specific (wireless router), and
simultaneous transmission exposure conditions are < 0.10 W/kg, 0.11 W/kg, 0.11 W/kg,
and 1.38 W/kg, respectively.
Class II permissive change for disable CDMA BC0/BC1, enable UMTS
B2/4/5 by software, change model name and product name. |
| 1 2 3 4 5 6 7 8 | Output power listed is conducted. This device is approved for use in the handset described
in this filing. End-users must be informed of the body-worn accessory operating
requirements for satisfying RF exposure compliance.
Class II permissive change for disable CDMA BC0/BC1, enable UMTS
B2/4/5 by software, change model name and product name. |
| 1 2 3 4 5 6 7 8 | Output power listed is ERP for Part 22 and Part 27 for frequencies below 1 GHz, EIRP for Part 24 and Part 27 for frequencies above 1 GHz. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.70 W/kg, 1.27 W/kg, 1.27 W/kg, and 1.38 W/kg, respectively. <br>
HAC Rating: M3 T4 - 2011. <br>
<br>
Class II permissive change for disable CDMA BC0/BC1, enable UMTS B2/4/5 by software, change model name and product name. |
| 1 2 3 4 5 6 7 8 | Output power listed is conducted. This device is approved for use in the handset described in this filing. SAR compliance for body-worn operations is restricted to belt-clips, holsters, or similar accessories that have no metallic component in the assembly and which provide at least 1 cm separation between the device including its antenna and the body of user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are < 0.10 W/kg, 0.11 W/kg, 0.11 W/kg, and 1.38 W/kg, respectively. |
| 1 2 3 4 5 6 7 8 | Output power listed is ERP for Part 22 and Part 27 for frequencies below 1 GHz, EIRP for Part 24 and Part 27 for frequencies above 1 GHz. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.70 W/kg, 1.27 W/kg, 1.27 W/kg, and 1.38 W/kg, respectively.
HAC Rating: M3 T4 - 2011. |
| 1 2 3 4 5 6 7 8 | Output power listed is conducted. This device is approved for use in the handset described in this filing. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. |
| 1 2 3 4 5 6 7 8 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 7 8 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6 7 8
|
Firm Name |
Shenzhen Morlab Communications Technology Co. Ltd.
|
|
1 2 3 4 5 6 7 8
|
Sporton International (Shenzhen) Inc.
|
|
1 2 3 4 5 6 7 8
|
Name |
M******** F******
|
|
1 2 3 4 5 6 7 8
|
I**** H******
|
|
1 2 3 4 5 6 7 8
|
Telephone Number |
+86 7********
|
|
1 2 3 4 5 6 7 8
|
+86 0********
|
|
1 2 3 4 5 6 7 8
|
E-mail |
Z******@morlab.cn
|
|
1 2 3 4 5 6 7 8
|
I******@sporton-lab.com
|
|