| 2 - CODING Each transmitter is manufactured and sold with a different univocal serial number set-in-factary. 3 - MEMORIZATION The transmitter security code, key code and facility code has to be stored onto the receiver. Your own installer or reseller will perform this operation during the installation or will give you the necessary instructions
|_ for proper memorization. 4 - BATTERY ACCESS lot on left bottom of transmitter and turn coin 1/4 turn. Insert the 1 Alkaline 12 battery with the negative side first towards the spring. Be sure the PCB board isin place before closing. Ec: access the battery take a coin and insert into EI WS) NOTE: Presse dispose of the battery correctly, ge ois hezerdows waste, 5 - TROUBLESHOOTING SOLUTION Replace the transmitter battery The radia emission isn't verifiable The transmitter led is OFF.
The radio emission isnt verifiable or The transmitter led is ON. TI Uk Check the receiver supply. al The transmitter led Replace the transmitter Tt blinks battery 318CTB FCC ID : TG6T318CTB This device complies with Part. 15 of the FCC Rules Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept interference received, including interference that may cause undesired operation. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications Any changes or modification not expressly approved by the party responsible could void the user's authority to operate the device. Notice Any changes or modification to RCS equipment not expressly approved by RCS could void the equipment warranty and/or guarantee. GUARANTEE The guorantee period of all RCS transmitter batteries is 6 months, beginning from the manufacturer date. During this period, if the product does not work correctly, due to a defective component, the product will be repaired or substituted at the discretion of the producer. The guarantee does not cover the plastic container integrity. REMOTE CONTROL SOLUTIONS, LLC 4862 E. Baseline Rd. Suite 104 Mesa, AZ 852704 USA Office: (480)-281-1878 Fax: (480)-281-1883 Web Site: wwew.rcsremotes.com e-mail: info@rcsremotes.com