FCC ID: TX4GY3LE Wireless Device

GY3LE Quick User Manual Regulatory Information Regulatory information, certication, and compliance marks can be found in the battery compartment of your device. Additional regulatory and environmental information can be found at g.co/cast/legal. Manufacturer address:

Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043. EMC COMPLIANCE STATEMENT Important: This device, power adapter and other in-box accessories have demonstrated Electromagnetic Compatibility (EMC) compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions and other electronic devices. RADIO FREQUENCY EXPOSURE Your device has been evaluated and meets the applicable regulatory requirements for radio frequency (RF) exposure. FCC & ISED CANADA REGULATORY COMPLIANCE Regulatory Information: United States FCC Regulatory Compliance Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modications not expressly approved by Google could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:

1. These devices may not cause harmful interference. 2. These devices must accept any interference received, including interference that may cause undesired operation. Model number: GY3LE Product name: Google TV Streamer Voice Remote US Responsible Party Google LLC 1600 Amphitheatre Parkway Mountain View, CA 94043 Contact: g.co/nest/contact Regulatory Information: Canada Industry Canada, Class B This device complies with ICES-003 Class B limits. The device complies with ISED license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.

GY3LE FCC & ISED Label Model: GY3LE FCC ID: TX4GY3LE IC: 11438A-GY3LE Label information is in the battery compartment of EUT

CFR 47 2.911 (d)(5) Attestation Date: 02-28-2024 FCC ID: TX4GY3LE FRN: 0014561690 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA 1. Remote Solution Co., Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Remote Solution Co., Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name:

Job Title:

Byung-Cheol Kim Manager Company Name: Remote Solution Co., Ltd.

Date: January 10, 2024 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: TX4GY3LE To Whom It May Concern:

I, the undersigned, hereby authorize UL Korea, Ltd. Suwon Laboratory to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Korea, Ltd. Suwon Laboratory on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Korea as our representative, we still recognize that we are responsible to:

a) complying with the relevant provisions of the certification program;

b) c) d) e) f) g) making all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

making claims regarding certification only in respect of the scope for which certification has been granted;

not using the product certification in such a manner as to bring Certification Division into disrepute and not making any statement regarding the product certification that Certification Division may consider misleading or unauthorized;

upon suspension or cancellation of certification, discontinuing the use of all advertising matter that contains any reference thereto and returning any certification documents as required by Certification Division;

using the certification only to indicate that the products are certified as being in conformity with specified standards;

endeavoring to ensure that no certificate or report or any part thereof is used in a misleading manner;

h) i) j) ensuring that any reference to the product certification in communication media such as documents, brochures, or advertising, complies with Certification Division requirements;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the when requested;;

taking appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; and k) documenting the actions taken. This authorization is valid until further written notice from the applicant. Sincerely yours, ______________________________ Byung-Cheol Kim / Manager REMOTE SOLUTION CO., LTD. 326-14, Apo-daero, Nam-myeon, Gimcheon-si, Gyeongsangbuk-do, Korea (Zip code : 39662) 2

CFR 47 2.911 (d)(7) FCC US Agent Letter of Attestation Date: 02-28-2024 FCC ID: TX4GY3LE FRN : 0014561690 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA FCC US Agent Agent Company Name : Remote Solution America FRN: 0033456450 Agent Contact Name: John Ahn Agent US Address: 222 Bridge Plaza South Suite 310 Fort Lee, NJ 07024 Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Remote Solution Co., Ltd. (the applicant) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicants agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, John Ahn Sr. Program Manager Remote Solution America

CFR 47 2.911 (d)(7) Agent Designation Attestation Date: 02-28-2024 FCC ID: TX4GY3LE FRN: 0014561690 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Remote Solution Co., Ltd. (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information:

Contact Person : John Ahn Company Name: Remote Solution America Company Address: 222 Bridge Plaza South Suite 310 Fort Lee, NJ 07024 Email: [email protected] FRN: 0033456450 Sincerely yours, Name:

Job Title:

Byung-Cheol Kim Manager Company Name: Remote Solution Co., Ltd.

Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 January 10, 2024 Subject:

FCC ID:

To Whom It May Concern:

Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 C.F.R. 0.457, 0.459), we request that the Commission withhold the following attachments as confidential documents from public disclosure indefinitely. Request for Confidentiality TX4GY3LE Schematic Diagram Block Diagram Theory of Operation (Operational and Technical Descriptions) In support of this request, we provide the following information:

1. Identification of the specific information for which confidential treatment is sought ( 0.459(b)(1)): We request that all of the information contained in the above-referenced exhibits to the certification application be withheld from routine public disclosure. 2. Identification of the Commission proceeding in which the information was submitted or a description of the circumstances giving rise to the submission ( 0.459(b)(2)): The material is being submitted in connection with our certification application for the above-captioned FCC ID. 3. Explanation of the degree to which the information is commercial, or financial or contains a trade secret or is privileged ( 0.459(b)(3)): The market for the technology that is the subject of the certification application is highly competitive, with numerous companies competing for the business of potential customers. Were competitors to become aware of the facts set forth in the above-referenced exhibits to the application at this time, it could have an adverse impact on our competitive standing and deprive us of the marketplace benefit we otherwise might achieve by virtue of having the product available before other competitors. If any of the information for which confidential treatment is sought was made publicly available, competitors could reasonably determine the scope and status of our activities. 4. Explanation of the degree to which the information concerns a service that is competitive ( 0.459(b)(4)): The technology that is the subject of the certification application is subject to intense competition from other manufacturers and service providers that are developing competing services and technology. 5. Explanation of how disclosure of the information could result in substantial competitive harm ( 0.459(b)(5)):

As noted above, were our competitors to become aware of the facts set forth in the above-referenced exhibits to the application, it could have an adverse impact on our competitive standing and deprive us of the marketplace benefit we otherwise would achieve by virtue of having the product available before other providers. 6. Identification of any measures taken by the requesting party to prevent unauthorized disclosure (

0.459(b)(6)): The information contained in the above-referenced exhibits to the certification application has been strictly controlled by us, with distribution limited to internal use only and for the specific purpose of conducting research, development, and testing of the technology. 7. Identification of whether the information is available to the public and the extent of any previous disclosures of the information to any third parties ( 0.459(b)(7)): The information that we request be maintained as confidential is not available publicly. The information has been protected and kept confidential by limiting external contacts to privileged and confidential communications. 8. Justification of the period during which the submitting party asserts that material should not be available for public disclosure ( 0.459(b)(8)): Given the competitive nature of the marketplace, any disclosure that we have developed the technology discussed in the above-referenced exhibits to the certification application would harm our competitive position. The information subject to this request for confidentiality should not be made available for public disclosure at any time. In addition, pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. 2.803 and the importation rules in 47 C.F.R. 2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we also request that the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely yours, ______________________________ Byung-Cheol Kim / Manager REMOTE SOLUTION CO., LTD. 326-14, Apo-daero, Nam-myeon, Gimcheon-si, Gyeongsangbuk-do, Korea (Zip code : 39662) 2