FCC ID: 2AOKM-HK19 Keyless Transmitter

Users Manual Electronic Key FCC ID: 2AOKM-HK19 IC: 24223-HK19 MODEL: RT-HK4F1524 PART NUMBER: RT-J5000, RT-J5200RT-S9000RT-G5010RT-J5010,RT-J6000 This remote has lock, unlock, Liftgate Unlock Hold Button , Forward button and Backward button, remote start Button and panic hold buttons; you can lock and unlock the vehicle doors and trunk/hatch with the remote transmitter. LOCK Button:

When you press the LOCK button, it locks all the doors. UNLOCK Button:

Pressing the button unlocks the drivers door. Pressing the button again within 5 seconds unlocks the other doors. Liftgate Unlock Hold Button:

Press and Hold. Will open if equipped with power liftgate PANIC HOLD Button:

When you press the PANIC button, the vehicle will start sounding the horn and flushing the hazard lamp. To stop the alarm, press any button on the electronic key. Forward button and Backward button:

When using the Remote Forward/ Backward function, the vehicle moves in the direction of the button while the button is pressed. REMOTE START Button:

Press the remote start button twice within 5 seconds. The vehicle will stay in the Remote Start mode for a 15-minute cycle. Press and release remote start button once to exit Remote Start mode. FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC WARNING:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device ADVERTENCIA IC Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS)d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis auxdeux conditions suivantes :

(1) Cet appareil ne doit pas causer d'interfrences.

(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles deprovoquer un fonctionnement indsirable de l'appareil.

Remote Tech LLC DATE:2023-8-11 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act asAgent On our behalf, I appoint Jianyan Testing Group Shenzhen Co., Ltd.; No.101, Building 8, Innovation Wisdom Port, No.155 Hongtian Road, Huangpu Community,Xinqiao Street, Bao'an District, Shenzhen, Guangdong,People's Republic of China., to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, as specified by Nemko Canada Inc, still resides with 310 ALDER RD, DOVER DE 19904 USA Dated this 2023-8-11 By:

Title:

Signature John Strong Printed On behalf of :

Remote Tech LLC Telephone:

302-336-8136

DATE :2023-8-11 Remote Tech LLC Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AOKM-HK19 Product Name: Keyless Transmitter Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description BOM TUNEUP These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2023-8-11 By:

Title:

Signature John Strong Printed On behalf of :

Remote Tech LLC Telephone: 302-336-8136

Remote Tech LLC Covered Equipment Certification Attestation Letter DATE Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AOKM-HK19 Remote Tech LLC (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not covered equipment. Remote Tech LLC (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Signed:

Printed name: John Strong Title: Manager Company Name: Remote Tech LLC Date: 8/11/2023

Remote Tech LLC U.S. Agent Designation for Service of Process -

Certification Attestation Letter DATE TO:

Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: 2AOKM-HK19 FRN of applicant: 0027073436 Per section 2.911(d)(7) of the FCC rules, [Remote Tech LLC] (the applicant) certifies that the equipment for which authorization is sought is designated to the following U.S. agent*

for service of process:

Company Name: Remote Tech LLC FCC Registration Number (FRN): 0027073436 Physical U.S. Company Address: 310 ALDER RD, DOVER DE 19904 USA Contact Person: John Strong Agent Email Address: remotetechllc@gmail.com The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed:

Signed:

Printed name: John Strong Title: Manager Company Name: Remote Tech LLC Date: 7/21/2023 Signed:

Printed name: John Strong Title: Manager Company Name: Remote Tech LLC Agent Signed (if different from Applicant):

Date:

7/21/2023

* the applicant must designate a contact located in the United States for purposes of acting as the applicants agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process.