BT REMOTE CONTROL Users Guide Version 1.0 Page 1 of 8 Table Of Contents Using the Remote Control ------------------------------------ 3 Batteries --------------------------------------------------------- 4 Compliance statement ----------------------------------------- 5 Page 2 of 8 Using the Remote Control You use the BT Remote Control to control the Video Conferencing Host Device. First time to use:
After insert the fresh batteries into the battery compartment, press and hold 5 sec of the Mute key to start the Bluetooth pairing mode. Page 3 of 8
Batteries BT REMOTE CONTROL uses two 1,5V AAA batteries. Only use high quality batteries. Insert the batteries according to the markings for plus and minus terminals under the cover at the Bottom of the Front. Page 4 of 8 Technical Specifications Model No. BW7630UN Bluetooth Version Frequency band/Output Power BLE 4.2, Class 2 device 2.4GHz ~ 2.4835GHz / 0dBm RF Operating Distance Power input Up to 30meters outdoor line of sight, in unobstructed environment Powered by AAA x 2pcs Alkaline batteries are recommended for the unit. Operating and Storage Temp. Operating: 0 40 C Storage: -10 60 C Dimension (L x W x T) 182mm x 40mm x 20mm Weight Maintenance 1. Do not expose your unit to dust, strong sunlight, humidity, high temperatures or 96g (not included batteries) mechanical shocks. 2. Use new batteries of the recommended type and size only. 3. Do not use old and new batteries together as old batteries tend to leak. 4. To avoid chemical leaks, remove batteries from the unit if you do not intend to use the unit for an extended period of time. 5. Do not use corrosive or abrasive cleansers on your unit. 6. Use a wet water cloth to clean the soft plastic surface, do not use any detergent or cleaning agent. 7. Keep the unit dust free by wiping it with a soft, dry cloth. 8. Do not disassemble the unit, it contains no user-serviceable parts. Warnings Do not modify the unit in any way. Risk of fire. Risk of electrical shock. Risk of burns. Do not dispose of electrical appliances and unsorted municipal waste. Use separate collection facilities. Contact your local government for information regarding the collection systems available. There are no user serviceable parts in this unit. Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Page 5 of 8 Compliance Statement Trademark The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Remotec Technology Ltd, is under license. Other trademarks and trade names are those of their respective owners. EU Declaration of Conformity Hereby, Remotec Technology Ltd., declares that this product is in compliance with Directive 2014/53/EU. You can find the Declaration of Conformity on www.remotec.com.hk/compliance/Polycom FCC Notice FCC ID : M7N-BW7630 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. IC Notice IC : 7311A-BW7630 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions :
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Page 6 of 8 Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (s) d'Innovation, Sciences et Dveloppement conomique Canada. Le fonctionnement est soumis aux deux conditions suivantes:
(1) Cet appareil ne doit pas causer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences, y compris celles susceptibles de provoquer un fonctionnement indsirable de l'appareil. Remotec Technology Ltd. Page 7 of 8 Workshop No. B2, 2/F., Block B, Tonic Industrial Centre, 19 Lam Hing Street, Kowloon Bay, Hong Kong Printed in China F820-7630-0000 Page 8 of 8