FCC ID: 2AYHE-2204G WiFi IP Camera

March 2021 QSG1_B_EN Reolink Argus 3 Series Quick Start Guide 58.03.001.0245

@ReolinkTech https://reolink.com EN Contents What's in the Box Camera Introduction Set up the Camera Charge the Battery Install the Camera Safety Instructions of Battery Usage Troubleshooting Specications Notication of Compliance 2 3 4 6 7 11 12 13 13 Whats in the Box Camera Stand Bracket Security Bracket Loop Strap Reset Needle Micro USB Cable Mounting Template Pack of Screws Surveillance Sign Quick Start Guide NOTE:

* Quantity of accessories varies with different camera models that you purchase. 1 English English 2 Camera Introduction Battery Status LED Micro USB Power Port Speaker Spotlight Status LED Lens Daylight Sensor Built-in Mic PIR Motion Sensor Reset Button

* Press for more than ve seconds to reset the device to factory settings. Power Switch Micro SD Card Slot NOTE: Always keep the rubber plug closed rmly. Different states of the status LED:

Set up the Camera USB Set up the Camera using a Smartphone Step 1 Scan to download the Reolink App from the App Store or Google Play store. RST OFF ON MicroSD Step 2 Turn on the power switch to power on the camera. Switch MicroSD ON MicroSD ON MicroSD Red Light: WiFi connection failed Blue Light: WiFi connection succeeded Blinking: Standby status On: Working status 3 English English 4 Step 3 Launch the Reolink App, and click the button in the top right corner to add the camera. Scan the QR code on the device and follow the onscreen instructions to nish initial setup. Charge the Battery Set up the Camera on PC (Optional) Step 1 Download and install the Reolink Client: Go to https://reolink.com > Support > App & Client. Step 2 Launch the Reolink Client, click the " " button, input the UID code of the camera to add it and follow the onscreen instructions to nish initial setup. Charge the battery with a power adapter. Charging indicator:

Orange LED: Charging Green LED: Fully charged always keep the USB charging port covered with the rubber plug after charging the battery. 5 English English 6 DevicesCloudYou haven't added any device. Please click the"+"button in the top right corner to add Mount the Camera 1 2 Rotate to separate the base from the bracket. Drill holes in accordance with the mounting template and screw the base of the bracket to the wall. Next, attach the other part of the bracket to the base. NOTE: Use the drywall anchors included in the package if needed. 7 English English 8 3 4 5 Screw the camera to the bracket. Adjust the camera angle to get the best eld of view. Secure the camera by turning the part on the bracket identied in the chart clockwise. NOTE:

To adjust the camera angle later, please loosen the bracket by turning the upper part anticlockwise. Place the Camera on a Surface If you plan to use the camera indoors and put it on a at surface, you may place the camera into the stand bracket and adjust the camera angle by slightly rotating the camera back and forth. 9 English English 10 Safety Instructions of Battery Usage Troubleshooting Reolink Argus 3/Argus 3 Pro is not designed for running 24/7 atfull capacity or around-the-clock live streaming. Its designed to record motion events and to live view remotely only when you need it. Learn useful tips on how to extend the battery life in this post:

https://support.reolink.com/hc/en-us/articles/360006991893 1. The battery is built-in, so do not remove it from the camera. 2. Charge the rechargeable battery with a standard and high-quality DC 5V/9V battery charger or Reolink solar panel. Do not charge the battery with solar panels from any other brands. Camera Is Not Powering on If your camera is not turning on, please apply the following solutions:

Make sure the power switch is turned on. Charge the battery with a DC 5V/2A power adapter. When the green light is on, the battery is fully charged. 3. Charge the battery when temperatures are between 0C and 45C and always use the battery when temperatures are between -20C and 60C. If these won't work, please contact Reolink Support https://support.reolink.com 4. Keep the USB charging port dry, clean and free of any debris and cover the USB charging port with the rubber plug when the battery is fully charged. 5. Do not charge, use or store the battery near any ignition sources, such as re or heaters. 6. Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed, or appears abnormal in any ways. If the battery is being used or charged, remove the battery from the device or the charger immediately, and stop using it. 7. Always follow the local waste and recycle laws when you get rid of the used battery. Failed to Scan QR Code on the Phone If you cannot scan the QR code on your phone, please try the following solutions:

Remove the protective lm from the camera lens. Wipe the camera lens with a dry paper/towel/tissue. Vary the distance between your camera and the mobile phone so that the camera can focus better. Try to scan the QR code under sufficient lighting. If these won't work, please contact Reolink Support https://support.reolink.com Failed to Connect to WiFi During Initial Setup Process If the camera fails to connect to WiFi, please try the following solutions:

Ensure that you have entered the correct WiFi password. Put the camera closer to your router to ensure a strong WiFi signal. Change the encryption method of the WiFi network to WPA2-PSK/WPA-PSK (safer encryption) on your router interface. Change your WiFi SSID or password and make sure that SSID is within 31 characters and password is within 64 characters. 11 English English 12 Set your password using only the characters available on the keyboard. General If these won't work, please contact Reolink Support https://support.reolink.com Operating Temperature:

-10C to 55C (14F to 131F) Weather Resistance:IP65 certied weatherproof Size: 121 x 90 x 56 mm Weight (Battery included): 330g (11.6 oz) Specications Video Field of View: 120 diagonal Night Vision: Up to 10m (33 ft) PIR Detection & Alerts PIR Detection Distance:

Adjustable up to 10m (33ft) PIR Detection Angle: 100 horizontal Audio Alert: Customized voice-recordable alerts Other Alerts:

Instant email alerts and push notications 13 English For more specications, visit https://reolink.com/. Notication of Compliance FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. English 14 IC statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic DevelopmentCanadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1)This device may not cause interference.

(2)This device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Cet appareil contient des metteurs / rcepteurs exempts de licence conformes aux RSS (RSS) d'Innovation, Sciences etDveloppement conomique Canada. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pasproduire de brouillage,et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. L'metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme auxCNR d'Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

1)L'appareil ne doit pas produire de brouillage;

2)L'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre lefonctionnement. This transmitter must not be co-located or operating in conjunction with any other antenna ortransmitter. This equipment should be installed and operated with a minimum distance of 20centimeters between the radiator and your body. Cet metteur ne doit pas tre Co-plac ou ne fonctionnant en mme temps qu'aucune autre antenne oumetteur. Cet quipementdevrait tre install et actionn avec une distance minimum de 20 centimtres entre le radiateur et votre corps. Operation of this device is restricted to indoor use only. (5180-5240MHz) Le fonctionnement de cet appareil est limit une utilisation en intrieur uniquement.

(5180-5240MHz) English 15

POAT TPE TTT TTA] Ha TT] MAL MATA Pui OL O02 O OF OS 09 OZ O08 06 QOLO 02 Oe OV OS O OF 0S 09 OL og 06 00bo1 oz o oF 0S 09 OL 08 OG WE AMularnelenlans|

i 8 \

LATHATITEANTL AGRA CHATLVORNULENNACORNA CORN UCOAN URNA 6 TE Product Name: WiFi IP Camera HVIN: Reolink Argus 3 Pro V2 User Name: admin Password: (blank) FCC ID: 2AYHE-22046 Ic: 26839-22046 Charging Voltage: 5V or 9V Power: Rechargeable Li-ion Battery Made in China

Reolink Innovation Limited Agent Authorization Company: Reolink Innovation Limited Address: FLAT/RM 705 7/F FA YUEN COMMERCIAL BUILDING 75-77 FA YUEN STREET MONG KOK KL HONG KONG Product Name: WiFi IP Camera Model Number(s): Reolink Argus 3 ProReolink Argus 3 Plus Product Description: WiFi IP Camera We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2022/08/03 Signature:

Name:

Sharon Guo Title:

Manager Company: Reolink Innovation Limited

Reolink Innovation Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022/08/03 Subject; Request for Confidentiality FCC ID: 2AYHE-2204G To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram software security requirement Operational Description User Manual Test Setup Photos Internal Photos External Photos OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Reolink Innovation Limited Sincerely, Signature:

Name: Sharon Guo Title: Manager

Reolink Innovation Limited Model Difference 2022/08/03 EUT NAME: WiFi IP Camera FCC ID: 2AYHE-2204G MODEL : Reolink Argus 3 ProReolink Argus 3 Plus All the model are the same circuit and RF module, except model names. Sincerely Clients signature Clients name / title : Sharon Guo / Manager Contact information / address: FLAT/RM 705 7/F FA YUEN COMMERCIAL BUILDING 75-77 FA YUEN STREET MONG KOK KL HONG KONG

Reolink Innovation Limited FCC Software Configuration Control Declaration Date: August 3, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: WiFi IP Camera / Reolink Argus 3 ProReolink Argus 3 Plus Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 Software Configuration Control v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Sharon Guo Date: 2022/08/03 Title: Manager Signatureof applicant FCC Software Configuration Control Declaration Rev1.1