Indoor 360 Camera Quick Start Guide SAVE THIS MANUAL FOR FUTURE REFERENCE Setup Step 1 Power-on Plug the power cable into the camera, and then plug the power adapter into an outlet as shown in the figure below. The LED indicator will flash red and blue OR rapid blue when the camera is ready for setup. Power Outlet Power Interface Power Cable LED Indicator Status Flashing Blue: The network is properly connected. Solid Red: The device is activating. Slowly Flashing Red: Invalid network connection. Fastly Flashing Red: MicroSD card or other error occurred. Flashing Blue and Red OR Rapid Blue:
Camera is ready for Wi-Fi setup. Turn on the camera and let it power up. The camera will completely rotate side-to-side and tilt up-and-down once. 1 Step 2 Camera Setup
- Add a camera to the Alula app Log in to your account using the Alula app. From the Alula app Camera screen, tap + on the upper-right hand corner to go to the scan QR code interface.
- Scan the QR Code on the bottom of the camera.
- Enter the verification code located on the bottom of the camera.
- Follow the app wizard to finish Wi-Fi configuration. If you want to change your camera's Wi-Fi, press and hold the reset button for 10s and repeat this part. 2 microSD Card Slot/Reset MIC If the camera fails to connect to your Wi-Fi network, press and hold the Reset button for 10s and repeat Step 2.2. To select another Wi-Fi network, press and hold the Reset button for 10s to reboot the device. When the LED indicator flashes red and blue or rapid blue, you can choose a new Wi-Fi network. 3. Angle Adjustment You can adjust the camera via the Alula app to get an optimum angle. The panning angle ranges from 0 to 340, and the tilting angle ranges from -15 to 105. 3 SD Card Management Insert a MicroSD card into the slot before mounting. MicroSD card not included in the Box Contents. Recommended compatibility: Class10, Max.128GB. 2. If the memory card status displays as Uninitialized, tap to initialize it. Mounting (Optional) The camera can be mounted on the wall or ceiling. Make sure the wall/ceiling is strong enough to withstand three times the weight of the camera and the mounting. Camera should stay away from any reflective objects such as mirrors or pictures. 4 1. Place drill template onto the surface you have chosen to mount the 2. (For cement wall/ceiling only) Drill screw holes according to the template and insert three expansion screws. 3. Use three metal screws to fix the camera base according to the camera. template. 4. Install the camera on the base, and turn it 15 to secure it. 2
5. Connect the power cable to the camera. If the camera was previously connected to the Wi-Fi network, it will automatically connect to the same Wi-Fi network. 5 Appendix Box Content Camera (x1) Base (x1) Power Cable (x1) Drill Template (x1) Screw Kit (x1) Power Adapter (x1) Quick Start Guide x(1) 6 Type A B LED Indicator Louderspeaker Power Interface Louderspeaker Power Interface Network Interface LED Indicator 7 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ce matriel est conforme aux limites de dose d'exposition aux rayonnements, FCC / CNR-102 nonce dans un autre environnement.cette eqipment devrait tre install et exploit avec distance minimale de 20 entre le radiateur et votre corps.