Wuxi Weida Intelligent Electronics Co., Ltd. Remote control renderings Wuxi Weida Intelligent Electronics Co., Ltd. Wuxi Weida Intelligent Electronics Co., Ltd. Description of the physical function requirements of the remote control 1. Remote control key value Under the Bluetooth connection status, press the button to send the Bluetooth key value. When there is no Bluetooth connection, it will automatically switch to the System code0x08F7 Code formatNEC infrared key value. Key code value Button IR CODE USEGE PAGE USAGE ID Remarks Power(TV) SET Infrared learning key POWER 0X0A 0X0C 0X0030 red 0X05 0X07 0X006A green 0X09 0X07 0X006B yellow 0X42 0X07 0X006C Back 0X1C 0X0C 0X0224 Home 0X0C 0X0C 0X0223 Up Down Left Right 0X00 0X01 0X03 0X02 0X0C 0X0C 0X0C 0X0C 0X0042 0X0043 0X0044 0X0045 Wuxi Weida Intelligent Electronics Co., Ltd. OK 0X1F 0X0C 0X0041 mute 0X0D 0X0C 0X00E2 CH+
CH-
VOL+
VOL-
Google Assistant 1 2 3 4 5 6 7 8 9 0 apps 0X5A 0X5F 0X58 0X5D 0X74 0X11 0X12 0X13 0X14 0X15 0X16 0X17 0X18 0X19 0X10 0X66 0X0C 0X0C 0X0C 0X0C 0X0C 0X07 0X07 0X07 0X07 0X07 0X07 0X07 0X07 0X07 0X07 0X0C 0X009C 0X009D 0X00E9 0X00EA 0X0221 0X001E 0X001F 0X0020 0X0021 0X0022 0X0023 0X0024 0X0025 0X0026 0X0027 0X01A2 del 0X30 0X07 0X002A Wuxi Weida Intelligent Electronics Co., Ltd. Remote control operating instructions 1.Special requirements for remote control 1 When Bluetooth is connected, the remote controller sends the Bluetooth key value; if Bluetooth is not connected, the infrared key value is sent. 2 Indicator light: red, each time the button is pressed, the indicator light flashes Low voltage reminder: when the battery is low, the indicator light flashes quickly, as long as it is still operating, it will keep flashing. When the remote control is no longer operated, it flashes 5 times or flashes for 3 seconds, then stops and goes off. 3 Support online upgrade of Bluetooth remote control, and trigger upgrade through HOST terminal. 4 Pairing method: Press and hold the "OK" + "VOL-" keys for 3 seconds at the same time, the indicator light flashes, the pairing success indicator light will stay on for 3 seconds and then go out. Connection interval 12ms 5 Remote control distance: 10m 6 Bluetooth device name: Kinetic RCU +
7 Support OK + Back reporting function 8 The interval is 20ms when not using voice, and 12.5ms when using voice 9 Adapt to BT5.0 2. Remote control other requirements 1 Pairing function requirements: there can be no problem that the Bluetooth device cannot be scanned or cannot be paired
(including continuously pressing the pairing key in a short time), please verify 50 times to ensure that there is no problem;
2 Reconnect function requirements: there can be no problems of unconnectable connection, including power-off and reconnection of the box, power-off and reconnection of the remote control, and restoring for 2 hours, etc. 3 Anti-interference function requirements: there should be no problems that greatly affect the WIFI throughput of the host, please ensure that the WIFI throughput of the host is normal when the remote control is connected;
Wuxi Weida Intelligent Electronics Co., Ltd. 4 Performance requirements: It is required to support 10m, and there must be no problems with voice call freeze, loss, and remote control key freeze, code loss, or key combination;
5 Power consumption requirements: The remote controller can be used continuously for at least 6 months 6Voice: 16Khz voice sample with 16-bit sampling, short press the voice key (color key) to start recording, the remote controller stops recording after receiving the stop recording command issued by the voice engine. Voice overtime protection for 30s, forced to quit recording. Box software can control MIC to open and close. Support remote control MIC and other MIC (such as the recording button on the mobile phone apk) alternately and switch voice input. 3. Learning function 1Hold on the Set button until the light turns red. 2) Place the remote of the TV opposite the remote of the box in the same level. 3)Press the TV button to enter the learning mode, then hold on the learning button for a long time. When the light of the learning remote flash three times fastly, then keep the light on. It means the learning way succeed. 4Press the Set button to save and quit the learning mode. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction