all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manual | Users Manual | 1.30 MiB | January 24 2022 / July 20 2022 | delayed release | ||
1 |
|
Internal photos | Internal Photos | 2.14 MiB | January 24 2022 / July 20 2022 | delayed release | ||
1 |
|
External photos | External Photos | 859.47 KiB | January 24 2022 / July 20 2022 | delayed release | ||
1 |
|
ID label and location | ID Label/Location Info | 447.62 KiB | January 24 2022 | |||
1 | Block Diagram | Block Diagram | January 24 2022 | confidential | ||||
1 |
|
Confidentiality | Cover Letter(s) | 400.01 KiB | January 24 2022 | |||
1 |
|
Letter Authorization | Cover Letter(s) | 318.22 KiB | January 24 2022 | |||
1 |
|
Model family declaration | Attestation Statements | 228.78 KiB | January 24 2022 | |||
1 | Operational Description | Operational Description | January 24 2022 | confidential | ||||
1 |
|
Power of Attorney Letter | Attestation Statements | 406.40 KiB | January 24 2022 | |||
1 |
|
RF Exposure | RF Exposure Info | 759.54 KiB | January 24 2022 | |||
1 | Schematics | Schematics | January 24 2022 | confidential | ||||
1 |
|
Test reports | Test Report | 3.09 MiB | January 24 2022 | |||
1 |
|
Test setup photos | Test Setup Photos | 348.80 KiB | January 24 2022 / July 20 2022 | delayed release |
1 | User manual | Users Manual | 1.30 MiB | January 24 2022 / July 20 2022 | delayed release |
2B USERS MANUAL MODERN SOUND FOR YOUR CLASSIC www. retromanufacturing.com TABLE OF CONTENTS WELCOME WHATS IN THE BOX PRECAUTIONS INSTALLATION INSTRUCTIONS WIRING DIAGRAM OPERATING YOUR RADIO BASIC OPERATION TONE CONTROLS SYSTEM SETTINGS USB DEVICE INSTRUCTIONS BLUETOOTH INSTRUCTIONS TROUBLESHOOTING FREQUENTLY ASKED QUESTIONS SPECIFICATIONS LIMITED WARRANTY REPLACEMENT PARTS INSTALLATION NOTES 1 3 4 5 8 11 15 18 19 23 26 28 29 32 33 34 36 NOTES 2 Copyright 2018 Retro Manufacturing, LLC WELCOME Thank you for purchasing a RetroSound radio. RetroSound radios combine classic styling with the advanced features you expect from a modern car stereo. Your RetroSound radio consists of two main parts: the radio face and the Motor 2B body. General Features Built-in Bluetooth for hands-free calling and audio streaming Plays MP3 and WMA files via USB input Selectable 32,000 color LCD illumination with user presets AM/FM tuner with 30 presets Plays MP3, WMA and FLAC files via USB inputs Selectable international tuner frequencies Built-in amplifier (25 watts RMS/45 watts peak x 4 channels) 3 EQ presets plus user-controlled bass, mid-range, treble, fader, and balance adjustment InfiniMount shaft/bracket system for maximum installation flexibility Available with period-correct knobs, bezel and/or faceplate Inputs: 1 rear-mounted standard USB port Outputs: 4-channel pre-amp outputs (front, rear, subwoofer) Separate power antenna and amplifier turn-on lead(s) 1 year parts and labor warranty The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. Any use of such marks by Retro Manufacturing, LLC are under license. Other trademarks and trade names are those of their respective owners. The information enclosed in this users manual is to be used as a guide to assist you with installation and operation of your radio. This guide does not cover every installation possibility, vehicle, or every aspect of the installation process. Retro Manufacturing, LLC, RetroSound, or its subsidiaries, assume no responsibility for any installation. This manual may be updated from time to time. Due to continuing product improvement, specifications and features are subject to change without notice. Visit our website for the latest updates: www.retromanufacturing.com. 3 The items shown below are packaged with your Motor 2B box. WHATS IN THE BOX Main Wiring Harness Power and Speaker Motor 2B Radio Body Bluetooth Microphone Wiring Harnesses Metal Mounting Back Strap Plastic Washer Kit InfiniMount Brackets Bracket Mounting Hardware and Hardware The items shown below are packaged with your radio face box. Radio Face Shaft Mounting Hardware Shafts Radio Face Mounting Screws 4 Copyright 2018 Retro Manufacturing, LLC PRECAUTIONS PLEASE OBSERVE THESE PRECAUTIONS WHEN INSTALLING AND USING THIS UNIT:
This users manual does not cover all possible installation scenarios. If you feel you cant install this unit yourself, take it to a local car audio professional. If you have questions about installing your radio, email us at tech@retromanufacturing.com or call us at 888.325.1555. Do not disassemble or modify the unit or attempt to repair the unit yourself. If the unit needs to be repaired, consult your dealer or Retro Manufacturing, LLC. Do not use the unit when it is out of order. If the unit is out of order or is in an abnormal state (has foreign objects in it, is exposed to water, is smoking or smells), turn it off immediately and consult your dealer or Retro Manufacturing, LLC. Refer fuse replacement to qualified service personnel. When the fuse blows, eliminate the cause and have it replaced by a qualified service technician with the fuse prescribed for this unit. Incorrect replacement of the fuse may lead to smoke, fire and damage to the unit. If the unit does not turn on, check the connections first. Then check the fuse in your vehicles fuse box and the fuse at the units wiring harness. Do not expose the unit to direct sunlight or excessive heat. Excessive heat will raise the interior temperature of the unit, which may damage it. Do not use the unit where it is exposed to moisture or dust. Exposure of the unit to moisture or dust may lead to smoke, fire or other damage to the unit and will void your warranty. Make sure the unit does not get wet in car washes or on rainy days. 5 PRECAUTIONS Refer wiring and installation to qualified service personnel. Installation of this unit requires special skills and experience. For maximum safety, have it installed by your dealer or qualified service professional. Retro Manufacturing, LLC is not liable for any problems resulting from improper installation of the unit. Please be sure to follow the instructions carefully while attempting installation. Follow instructions to wire the unit. Failure to follow the instructions could cause damage to the unit, fire, injury or death. Be careful not to damage the leads. Prevent them from being caught in the vehicle chassis or from being damaged by screws or moving parts such as seat rails. Do not scratch, pull, bend or twist the leads. Do not install them near heat sources or place heavy objects on them. If leads must be routed around sharp metal edges, protect them by wrapping them with vinyl tape or similar protections. NOTE: Cutting the main wiring harness, antenna lead, USB cable cables will void the warranty of your radio. Use the designated parts and appropriate tools to install this unit. The use of parts other than those supplied may result in internal damage to the unit. Do not interfere with safety-related vehicle components. Do not wire or affix this unit to the fuel tank, brakes, suspension, steering wheel, pedals, etc. Check for electric wiring, piping and other items before installing the unit. Never install the unit in a location where it interferes with your field of vision. 6 Copyright 2018 Retro Manufacturing, LLC PRECAUTIONS Never splice into the power lead to supply other equipment with power. After installation and wiring, always check the normal operation of other electrical equipment. Make sure that no wires interfere with driving or getting in and out of the vehicle. Insulate all exposed wires to prevent short-circuiting or electric shock. Do not operate the unit for prolonged periods with the engine off. Prolonged operation with the engine turned off will drain the battery. To prevent accidents, keep the volume of your radio at a level that allows you to hear outside noises such as emergency sirens and train crossing warnings. Prolonged exposure to high volume levels may also result in hearing loss. This unit requires 12 volts to both the red and yellow power leads. The unit will not work without power to both of these leads. Disconnect the negative (-) battery cable before beginning installation. Verify the battery ground by checking that one wire is connected to the vehicles starter mounting bolt or engine block and the other to the vehicles chassis using at least 8 gauge wire. Make sure the alternator or generator connections are secure and free from corrosion, rust or dirt. This unit is designed for operation with a negative ground 12 volt DC battery system. Do not operate this unit with other battery systems, especially an 18 or 24 volt DC or a positive ground system. If you have a 6 volt system, you need to either convert to 12 volt DC or purchase a separate inverter that would increase the voltage to 12 volts. NOTE: The inverter needs to be rated at 8 amps or higher in order for the radio to operate properly. 7 INSTALLATION INSTRUCTIONS STEP 1: Install the Radio Face Plug the ribbon cable included with the Motor 2B body into the radio face. After plugging in the face, attach it to the body and tighten with the four radio face mounting screws provided in the radio face box (the screws are very small and are in the hardware bag with the shaft nuts). The RetroSound logo on the Motor 2B body should be facing upwards. Take care to not install the face to the body upside down. NOTE: Optionally, the radio face can be mounted remotely up to nine feet away from the Motor 2B body using an optional Face to Body Extension Cable. In some installation applications, a bracket can be used to mount the face to the body at an angle. Radio Face Figure 1 - Attach the Radio Face 8 Copyright 2018 Retro Manufacturing, LLC INSTALLATION INSTRUCTIONS STEP 2: Install InfiniMount Brackets Attach each InfiniMount bracket to the correct side of the radio using the supplied screws. Before tightening the screws, you need to adjust the brackets up, down, forward or backward. You may also rotate, cut, or bend the brackets to achieve the perfect fit
(see Figure 2). Complete the assembly with at least two screws tightened on each side. NOTE: In some installations the brackets must be moved far enough forward or backwards or rotated so that only two screws will align with the threaded screw holes on the radio. Two screws are sufficient to hold the brackets in place. R Figure 2 - Attach InfiniMount Brackets NOTE: You may need to cut, trim or bend the brackets to achieve a perfect fit. You can even drill new mounting holes into the bracket if you need to. The InfiniMount system is designed to be modified. Modifying your brackets will NOT void your warranty. 9 INSTALLATION INSTRUCTIONS STEP 3: Mount Shafts to Brackets To match the location of your shafts to the proper width of your vehicles dash, first measure the distance between your existing shaft holes from center to center. Mount a shaft to each bracket using the supplied shaft nuts and washers. Finger tighten the shaft nuts to prepare for the final installation (see Figure 3). Once you ensure proper width, tighten the screws and nuts (DO NOT OVERTIGHTEN). DAMAGE FROM OVERTIGHTENING WILL VOID YOUR WARRANTY. Finally, plug the shafts into each side of the main unit (See Figure 4). Shaft Washers Shaft Nuts Figure 3 - Mount Shafts to Brackets Figure 4 - Plug Shafts into the Body 10 Copyright 2018 Retro Manufacturing, LLC INSTALLATION INSTRUCTIONS STEP 4: Complete Wiring Connections Figure 5 - Wiring Diagram NOTE: Cutting the wiring harness, antenna lead will void your warranty. 11 INSTALLATION INSTRUCTIONS NOTE: This unit requires +12 volts to both the red and yellow wires to operate properly. Locate the three wiring harnesses: main wiring harness, power wiring harness and speaker wiring harness (see Whats in the Box on page 4). First connect the main wiring harness to the back of the radio. Then connect both the power and speaker Wiring Harnesses to the black female plug of the main wiring harness. After doing this, connect the bare wire ends of your power and speaker wires to the appropriate power and speaker locations in your vehicle (see Figure 5). Have your radio installed by a professional if this part of the install is too difficult, or contact us if you have questions. Installation Notes To prevent damage to the unit, do not connect the power connector until you have completed the wiring process. This is a 12 volt negative ground ONLY radio. If you have a positive ground, or a 6 volt system, you need to either convert to 12 volts or purchase a separate inverter that would increase the voltage to 12 volts. Please note that any inverter must be rated at 8 amps or higher in order for the radio to operate properly. 12 Copyright 2018 Retro Manufacturing, LLC INSTALLATION INSTRUCTIONS Rear USB Inputs One USB connector cable is located at the rear of the Motor 2B radio body. During installation, you must route the cable to a convenient and accessible location for plugging in USB devices. If the cable provided is not long enough (20 inches), you may use our optional USB Extension Cable (not included) to extend the reach of the cable. This cable also allows you to install the USB port into the factory location for the cigarette lighter for a factory look and easy access. STEP 5: Finish the Installation IF USING A BEZEL, place the bezel on the face of the radio, then install the assembled radio from behind the dash until the bezel and radio face are flush with the front of the dash and the radio shafts protrude through the shaft openings in the dash. Using the supplied washers and shaft nuts
(see Whats In the Box on page 4), secure the radio to the dash. IF USING A FACEPLATE, slide the radio into the hole from behind the dash, then align the faceplate over the radio shafts from the front. Using the supplied washers and shaft nuts (see Whats In the Box on page 4), secure the faceplate to the dash and the radio. DAMAGE RESULTING FROM OVERTIGHTENING THE SHAFT NUTS WILL VOID YOUR WARRANTY. Next, youll need to secure the rear of the radio using the supplied back strap and hardware (see Whats in the Box on page 4). The back strap mounts using the threads in the rear of the radio body and can be bent and adjusted to align with the mounting point of the original factory radio behind the dash. 13 INSTALLATION INSTRUCTIONS THE SHAFTS ARE NOT STRONG ENOUGH TO SUPPORT THE WEIGHT OF THE RADIO. FAILURE TO SECURE THE RADIO WITH THE BACK STRAP CAN DAMAGE YOUR SHAFTS AND WILL VOID YOUR WARRANTY. Figure 6 - Installing the Back Strap View from behind dash Finally, slide the rear knobs over the shafts, rotating them into the correct position, and push them into place. Mount the front knobs by gently pressing them onto the shaft. DO NOT PRESS TOO HARD. PRESSING TOO HARD CAN DAMAGE YOUR SHAFTS AND WILL VOID YOUR WARRANTY. 14 Copyright 2018 Retro Manufacturing, LLC OPERATING YOUR RADIO Basic Operation 1 2 3 4 5 6 7 8 9 Figure 6 - Front Panel Controls 1 2 Figure 7 - Left Shaft with Knobs 1. Left Front Knob 2. Left Rear Knob 3. Push-Button 4. Push-Button 5. Push-Button 6. Push-Button 7. Push-Button 8. Right Front Knob 9. Right Rear Knob 15 OPERATING YOUR RADIO GENERAL OPERATION Power On/Off Press the left front knob (#1) to turn the unit on. RETROSOUND will appear on the screen. Press and hold the left front knob (#1) to turn the unit off. GOODBYE will appear on the screen to confirm that it has turned off. Volume Mode Turn the left front knob (#1) to adjust the volume between 0-46. Turn the left rear knob (#2) clockwise to select from available listening sources: RADIO, USB 1, Bluetooth.
(The USB source mode will not appear unless a USB device is plugged in). The auxiliary and USB inputs are located at the back of the radio body. The auxiliary inputs may be used to play music from any portable device with a standard headphone output, such as a MP3 player, iPod or iPhone, portable CD player or portable satellite radio receiver. The USB input allows you to play music from a flash drive. To use these inputs, the cables must be routed to an accessible area during installation. Radio Tuning Turn the right front knob (#8) to tune to the next or previous AM/FM frequency. NOTE: When the radio is tuned to a strong stereo FM station, the stereo indicator will appear on the upper right corner of the LCD screen (two oval circles). 16 Copyright 2018 Retro Manufacturing, LLC OPERATING YOUR RADIO Radio Bands Turn the right rear knob (#9) counter-clockwise to toggle through the five radio bands (two AM and three FM). Storing Radio Pre-sets There are six radio pre-sets for each radio band. For pre-sets one through five, tune to the desired radio station and then press and hold the push-button (#3-7) to store into memory. To store pre-set number six, tune to the station you want to store, then turn and hold right rear knob clockwise to store. Selecting Radio Pre-sets To recall radio pre-sets, press the appropriate pre-set button (#3-7) in the selected radio band. To recall pre-set six, turn the right rear knob
(#9) clockwise and release it. Press the right front knob (#8) to mute or unmute. This sub-menu (SUB) turns the subwoofer RCA output on or off. Mute Subwoofer ON/OFF Subwoofer Volume This sub-menu (SUB VOL) adjusts the volume of the subwoofer between 0-12. This sub-menu will only appear when a subwoofer is attached and SUB ON is selected in the previous menu. Subwoofer Crossover Frequency This sub-menu (Sub 120H) allows adjustment of the frequency crossover point of the subwoofer between 80Hz, 120Hz or 160Hz. 17 OPERATING YOUR RADIO TONE CONTROLS This sub-menu allows advanced tonal adjustments, balance and fader controls and the pre-set equalizer options. To access this sub-
menu, press the left front knob (#1). Repeatedly press the left front knob to scroll through the available options. To adjust within the sub-
menu, turn the left front knob clockwise or counter-clockwise. Digital Signal Processor (DSP) This sub-menu allows you to turn the Digital Signal Processor (DSP) on and off. Factory default is DSP OFF. When set to DSP ON, you can choose one of three pre-set equalization settings:
CLASSIC This setting offers subtle sonic adjustments that lend themselves to classical music. POP This setting accentuates bass and treble frequencies and is suitable for popular music. ROCK This setting accentuates treble frequencies and is suitable for rock music. This sub-menu (bass) allows bass tone adjustments. You may boost or cut low frequencies from +7 to -7. This sub-menu (MIDDLE) allows mid tone adjustments. You may boost or cut mid frequencies from +7 to -7. Bass Middle Treble This sub-menu (treble) allows treble tone adjustments. You may boost or cut high frequencies from +7 to -7. 18 Copyright 2018 Retro Manufacturing, LLC OPERATING YOUR RADIO This sub-menu (bal) allows adjustment of stereo sound to left or right. This may be helpful in compensating for the position of the driver in relation to the vehicles speakers. Adjustment range is from 0-12 between left and right speakers. Balance Fader This sub-menu (fader) allows you to adjust the sound between the front and rear speakers. Adjustment range is from 0-12 between front and rear speakers. SYSTEM SETTINGS The System Settings sub-menu system enables access to numerous additional features of your radio. Press and hold the right-front knob
(#8) for three seconds to access the System Settings sub-menu. Then rotate the right-front knob (#8) to scroll through the available sub-
menu options. Once in a specific sub-menu, press the right-front knob
(#8) to change the options. Auto Seek/Manual This sub-menu allows you to select either Auto Seek or Manual tuning when listening to the radio. In Auto Seek mode the radio will tune to the next available station when tuning. A Store This sub-menu will automatically fill FM pre-sets on all three FM bands of six pre-sets each (eighteen total pre-sets) with the strongest stations. To activate this feature, once in the system settings, press the right front knob (#1) until A STORE appears on the screen, then press the left front knob to activate. This process can take up to one minute. 19 OPERATING YOUR RADIO This sub-menu changes the sensitivity of the FM tuner. When listening to the FM tuner, selecting between LOCAL and DISTANT can aid in listening to weak FM stations or compensate for stations that have too strong a signal. This sub-menu allows you to set the clock. To adjust hours, turn the right front knob (#8) clockwise. Adjusting past 12 will toggle the AM/
PM indicators. Once the hour is set, press the right front knob to adjust minutes. Once minutes are set, press the right front knob to access the 12/24 menu. This sub-menu allows you to adjust the clock from a twelve hour clock to a twenty-four hour clock. The factory default setting is for a twelve hour clock (CLK 12). Display Frequency/Clock This sub-menu allows you to adjust the priority screen view between radio frequency (DISP FREQ) and clock (CLK). This sub-menu toggles off the clock when the radio is turned off. Default is CLK ON. Local/Distant Clock Clock 12/24 Clock On/Off Beep On/Off This sub-menu controls the audible beep confirmation that sounds during operation of the radio. Select BEEP ON to hear the audible beep, and BEEP OFF to disable the audible beep. 20 Copyright 2018 Retro Manufacturing, LLC OPERATING YOUR RADIO Display Color (SCAN) This sub-menu changes the display color. The default setting is SCAN, which will scan through all of the available colors. To customize your display color, look for the word SCAN in the sub-menu (if a custom color has already been chosen, look for that color name in the sub-
menu), then press the right-front knob (#8) to select one of the preset colors: white, green 1, green 2, green 3, orange, red, pink, purple 1, purple 2, blue 1, blue 2, user, Scan. To create a custom color, select USER in the preset color menu, then rotate the right-front knob (#8) once. The display will say RGB. Now press the right-front knob (#8) once. This will allow you to edit the RGB values for 32,000 color variations. Rotate the right-front knob (#8) to adjust the reds, then press the same knob (#8) to move to the greens. Repeat this process to adjust the greens and the blues. NOTE: If you lower all RGB settings down to 00 the display will go black, and you will need to reset the radio by disconnecting all power from the unit for 2 minutes. Dimmer High/Low This sub-menu allows you to adjust the radios display brightness between high (DIMM HIGH) and low (DIMM LOW). Bluetooth On/Off (BT) This sub-menu turns Bluetooth on or off. Bluetooth must be enabled in order to connect a Bluetooth device for hands-free operation or streaming audio. 21 OPERATING YOUR RADIO Bluetooth Connect/Disconnect This sub-menu allows the radio to be discoverable on your Bluetooth device. Choose BT CONNEC to allow your device to connect, and BT DISCON to disable Bluetooth connections. To connect your device, choose BT CONNEC, then search for RETROSOUND in your phones Bluetooth device list. Enter password 0000 if prompted. Area USA/EUR/AUS/JAP/RUS Motor 2B has the capability to receive radio broadcasts from around the world. This sub-menu allows you to adjust to broadcasts in your country. Factory default setting is United States (USA). Turn the right front knob (#8) to toggle between Europe (EUR), Australia (AUS), Japan (JAP) and Russia (RUS). To confirm the change, pause to let the sub-menu revert to your tuner. You will see your selected tuner mode:
AREA USA, AREA EUR, AREA AUS, AREA JAP, AREA RUS. Volume Last/Adjust This sub-menu allows you to adjust the volume level that the radio first turns on to. The factory default setting is VOL LAST, which sets the turn on volume at the last volume used. VOL ADJUST allows you to pre-set the volume level that the radio turns on at from 0-46. 22 Copyright 2018 Retro Manufacturing, LLC USB DEVICE INSTRUCTIONS Connecting a USB Device The USB input is located at the rear of the radio body. The USB cable must be routed to a convenient and accessible location for plugging in USB devices. Once youve turned on your radio and connected your flash drive or supported USB device to the USB input, the radio will find your songs and automatically begin playing them. The icon appears on the LCD during USB playback. To change songs, rotate the right front knob (#8) to access the next or previous song. The preset buttons on the front of the radios control face (#3-7) will allow you to play/pause (#3), listen to 10 seconds of each song (INT) (#4), repeat the track youre listening to (RPT) (#5) or randomly select from all songs on the attached flash drive or supported USB device (RDM) (#6). About MP3/WMA Files MP3 (MPEG Audio Layer-3) and WMA (Windows Media Audio) is a format for compressed audio files. When your radio is in USB mode (USB 1 or USB 2), you can play MP3 and unprotected (no DRM) WMA files off the flash drive. Common facts about these compressed-sound formats:
High bit rate and high sampling frequencies are recommended for high sound quality. Selecting VBR (Variable Bit Rate) is not recommended because playing time is not displayed properly and there may be some audible skipping artifacts. The playback sound quality differs depending on the encoding circumstances. For details, refer to the user manual of your own encoding software. When adding MP3 files to your flash drive, it is recommended to set the bit rate to 128 kbps or more and fixed. When adding WMA files to your flash drive, it is recommended to set the bit rate to 64 kbps or more and fixed. Do not set the copy protect attribute on the WMA file or you will not be able to play the track. 23 USB DEVICE INSTRUCTIONS Motor 2B will read only FAT or FAT32 formatted flash drives. This radio will NOT read NTFS formatted drives. Motor 2B will read files placed in the root directory first before playing files in the folder structure of the drive. Please note that files are read in order of creation NOT alphabetically or numerically. Older files will get read first in a folder. Caution! Except for private use, duplicating audio data (including MP3/WMA) or distributing, transferring or copying it, whether free or paid for without permission of the original copyright holder is strictly prohibited by law and international treaty. Viewing MP3/WMA Song Information When playing MP3/WMA files from the USB source, you can view the track name, album, artist info (ID-3) information automatically from these files. Once the USB drive is inserted, the following info will scroll across the screen in the following order: F-DIR (folder directory), MP3 FILE (file name of song), ALBUM (name of album) ARTIST (name of artist), SONG (name of song). To access the clock when in USB mode, turn the left rear knob counter-clockwise. The clock will time out after a few seconds and will revert to the ID-3 information. Turning the left rear knob counter-
clockwise again will revert to viewing the ID-3 information on-screen. NOTE: FLAC format does not support ID-3 information and will not display the artist or song information. Not all music software handles ID-3 information the same way. Some software will produce MP3 files with ID-3 information that is not readable by Motor 4. If this occurs, you may need to use a converter or ID-3 editor to change the ID-3 information for the artist, album and song information to display properly on your radio. 24 Copyright 2018 Retro Manufacturing, LLC USB DEVICE INSTRUCTIONS USB Playback Mode The preset buttons (#3-7) on the front of the radios control face will allow you to play/pause, listen to 10 seconds of each song (INTro), randomly shuffle all songs (RDM) and navigate folders. To play or pause, press button (#3). To activate/deactivate scan, press button (#4). To activate/deactivate shuffle, press button (#5). To go to the previous folder, press button (#6). To go to the next folder, press button (#7). To switch to the next song, rotate the right front knob (#8) clockwise. To switch to the previous song, rotate the right front knob (#8) counter-clockwise. To activate/deactivate repeat, turn the right rear knob (#9) clockwise. 25 BLUETOOTH DEVICE INSTRUCTIONS Bluetooth Instructions Bluetooth Hands-Free and A2DP Streaming Operation You can make or receive phone calls using a Bluetooth enabled phone connected to your radio, controlling basic functions via the radio interface. During a call, the radio music source will be muted and the call broadcast through your car speaker system. You can also listen to music stored on a A2DP enabled Bluetooth device. Pairing a Bluetooth Device When connecting a Bluetooth device for the first time, you must first pair the device with the unit. For most devices, pairing only needs to be done once. 1. To pair your device first make sure the Bluetooth function is turned on in the radio sub-menu. 2. Then, change the BT DISCON function to BT CONNEC to make your radio discoverable (ensure Bluetooth is enabled on your device). 3. Next, search for a new Bluetooth device from the phone (this may take up to 30 seconds) and select RETROSOUND from the Bluetooth device list. 4. If prompted, enter 0000 for the PIN. If successful, PAIRING OK will be displayed on the LCD screen. The paired device will then connect to your radio automatically. On some devices, you may need to select SET AS AUTHORIZED or similar to ensure your radio will automatically pair on future usage. PAIRED NOTIFICATION DISPLAY: When the Bluetooth device is paired with your radio, the Bluetooth icon will appear on the LCD screen. This will occur whenever you use the system while the paired device is within range. 26 Copyright 2018 Retro Manufacturing, LLC BLUETOOTH DEVICE INSTRUCTION Placing a Call 1. Dial the desired number on the paired phone. 2. Once dialing is in progress, CALLING will appear on the screen. 3. Once the call is in progress, TALK will appear on the screen along with the elapsed call time (TALK 00:00). Receiving a Call 1. If a call is incoming, any audio playback from the current source will either be muted or paused (depending on the source) and PHONE IN will be shown on the screen along with the caller ID if it is enabled by the phone/carrier. 2. To accept the call, turn the left rear knob (#2) counter-clockwise. Ending a Call 1. To end the call, turn the left rear knob (#2) counter-clockwise. NOTE: We recommend mounting the microphone on the sun visor, A-pillar or steering column inside the vehicle close to the driver. The microphone is very sensitive, and you may speak at normal volume when using hands-free operation. Streaming Music From Your Device 2. Once your device is paired with your radio, make sure the source mode is set to BT AUDIO. 3. Next, select your desired playback source on your device (iTunes, Pandora, etc) and play the music as you normally would. NOTE: Some devices may allow your radio the ability to skip songs/tracks/selections by using the right front knob (#8). 27 TROUBLESHOOTING Problem Possible Cause Radio will not turn 12 volt Batt+ wire on (no lights, not connected Check all connections for proper voltage with a volt no sound) or incorrect voltage meter. Voltage range:
Action to Solve Problem 12-15 volts connection Check ground connection
+12 volt accessory wire not Check +12 volt connected or incorrect accessory wire voltage Ground wire not connected Fuse on Batt+ is blown Replace blown fuse No sound heard Volume turned Increase radio volume from unit but unit all the way down lights up Internal amp in protection mode Wrong source mode selected Make sure the unit is in the Unit blows fuses Possible short in wiring Incorrect fuse used, make sure Check speaker leads for any grounded or shorted wires desired source mode
(RADIO, USB 1) only fuses with correct 15 amp ratings are used and check all wiring connections for possible short Battery hooked up Make sure battery is properly backwards connected USB Error Invalid media / device type Please review page 24 for which formats and devices are acceptable for playback System Reset To restore/reset the unit to factory defaults, remove all power from the unit, wait 5 minutes and then reconnect power. This will not reset your station presets. 28 Copyright 2018 Retro Manufacturing, LLC FREQUENTLY ASKED QUESTIONS Do your radios work on 6 volt systems or on positive ground systems?
No. Our radios are 12 volt, negative ground only. After-market converters and inverters are available but must have at least 8 amps of continuous output. Im having problems getting the radio to turn on. RetroSound radios require 12 volts to both power leads. The red lead (+12 volt accessory) goes to a switched power source, and the yellow to a constant +12 volt power source. Using a volt meter, check the voltage when the key is turned from off to on. If there is a significant drop in the voltage, the circuit the yellow lead is attached to cannot handle the additional draw of the radio. You will need to find another circuit that can handle the additional draw of the radio, or you will need to go directly to the battery. What speaker wire do you recommend I use?
We recommend using 16 gauge wire for the speakers. I have all 4 speakers connected to your radio and the display is lit up like it is working, but theres no sound coming out. This usually indicates one of two things:
Speaker wires touching each other or the vehicle chassis at some point. Check each speaker lead from radio to speaker. Speaker impedance below 4 ohms. Older speakers are usually not compatible with modern electronics. 29 FREQUENTLY ASKED QUESTIONS My car originally came with a switch to control my automatic antenna. Can I use the RetroSound radios remote antenna wire to control my antenna?
No you cannot. Your factory antenna is known as semi-
automatic. It requires a switch to either extend or retract the antenna. You must retain this switch to control your antenna; the RetroSound radios power antenna wire is for more modern fully-
automatic antennas not requiring a separate switch. The sound output is all mid-range, with very little bass and a strangled-sounding upper range. What is wrong?
One of your speaker wires is connected backwards. This is called being out of phase. Check to make sure positive is wired to positive and negative to negative on all your speakers. Will cutting or bending the InfiniMount brackets void the warranty or harm the unit?
No. The RetroSound patented InfiniMount bracket system has been designed specifically to be bent, cut and modified to simplify radio installation. Modification to the radios brackets is actually encouraged to ensure proper fit. If you have questions about modifying the bracket system, email us at tech@retromanufacturing.com or call us at 888.325.1555. How much should I tighten the shaft nuts when installing the brackets and mounting the radio to the dash?
DO NOT OVERTIGHTEN the shaft nuts. The shaft nuts are NOT the only means of securing the radio to the dash. There is a back strap included which works with the shaft nuts to secure the radio to the dash. Please note that overtightening the shaft nuts could break the shafts. Retro Manufacturing, LLC will not be responsible for broken shafts due to overtightening of the shaft nuts. 30 Copyright 2018 Retro Manufacturing, LLC FREQUENTLY ASKED QUESTIONS I have your radio with an amp connected, but hear a whining/buzzing sound through the speakers when I step on the accelerator. If you have an external amplifier installed and experience a high-
pitched noise that varies with the engines RPM, there are many possible solutions:
Make sure the amplifiers gain controls are not turned all the way up. Amplifiers amplify everything, including noise. Try grounding the amplifier near where it is installed. Try a filter on the amplifiers 12 volt power lead. Make sure to use a filter that includes a ground wire. On rare occasions, noise can be introduced through the antenna lead. If disconnecting the antenna makes the noise go away, you need to replace or repair the antenna plug where it goes into the radio. When I plug in my flash drive the screen says USB ERR, and it wont play the files I placed on the drive. Make sure the files on the drive are .mp3, FLAC or unprotected .wma (Windows Media Audio) files. iTunes files are .m4a format and need to be converted to
.mp3 format, which can easily be done using iTunes. Verify the capacity of the flash drive. Motor 2B will play 1 gig up to 32 gig size flash drives. Make sure the flash drive is not NTFS formatted. Always use the FAT32 format (most drives are formatted with FAT32 from the factory). Be sure to do a full format rather than a quick format, and check that none of the files or folders have names longer than 64 characters. It is very important that none of the audio files have DRM. Use only FLAC, MP3 or unprotected Windows Media format files. 31 Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) 87.5-107.9MHz FM Antenna Terminal Usable Sensitivity Selectivity Signal to Noise Ratio Harmonic Distortion @ 1 kHz Separation Frequency Response SPECIFICATIONS External Antenna Connector 12.5 dBf 75 dB @ 400kHz 62 dB (Stereo), 67 dB (mono) 0.8% (stereo), 0.5% (mono) 32 dB @ 1kHz 30-16,000 Hz AM (EU and US Tuning Capable) Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) 530-1710 kHz External Antenna Connector Antenna Terminal General Dimensions (radio face & push-buttons only) Dimensions (radio body) Power Requirements Current Consumption (during operation) Current Consumption (car off) Output Impedance Low Level Output (4 channels) EROM USB Input (USB cable length, 40) NOTE: All specifications are subject to change without notice. 3.5W x 1.5 H x 1.05 D 3.96W x 1.98H x 4.30D 10.5-14.4 volts Max. 15A
<3.5 mA 4-8ohm 2.85 volts Non-Volatile Memory 5V (USB female input) Output Power (@ 14.4 volts @ 4 ohm @ 1% THD) 25x4 watts RMS 45x4 Max Power 32 Copyright 2018 Retro Manufacturing, LLC LIMITED WARRANTY Limited Warranty If your unit does not work properly because of defects in materials and workmanship, Retro Manufacturing, LLC (collectively referred to as the warranter) will for the length of the period indicated in the chart below at its option either (a) repair your unit with new or refurbished parts, or (b) replace it with a new or refurbished unit. The warranty period starts with the date of original purchase. The decision to repair or replace will be made by the warranter. CATEGORIES Motor 2B PARTS One (1) Year During the warranty period, there will be no charge for parts. You must mail in your unit prepaid during the warranty period. This warranty only applies to products purchased and serviced in the United States or Puerto Rico. This warranty is extended only to the original purchaser of a new product which was not sold as is.. To handle a warranty issue, contact us at tech@retromanufacturing.com or 888.325.1555 for a Return Authorization (RA) number. All returns and warranty issues must be accompanied by a Return Authorization number. Any product received without a RA number will be refused. For warranty outside of the United States, please contact the reseller where the product was purchased or email us at Tech@retromanufacturing.com . A purchase receipt or other proof of the original purchase date is required for warranty service. LIMITED WARRANTY-LIMITS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials and workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The warranty ALSO DOES NOT COVER damages which occurred during shipment, failures which are caused by products not supplied by the warranter, failures which result from accident, misuse, abuse, neglect, bug infestation, mishandling, misapplication, alteration, faulty installation, set-up adjustment, maladjustment of consumer control, improper maintenance, improper antenna, inadequate signal reception or pickup, power line surge, improper voltage supply, lightning, modification, commercial use (such as use in hotels, offices, restaurants, or other business uses) or rental use of the product, or service by anyone other than Retro Manufacturing, LLC, or damage that is attributable to acts of God. THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER LIMITED WARRANTY. THE WARRANTER IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS UNIT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. (As examples, this excludes damages for lost time, cost of having someone remove or re-install an installed unit if applicable, travel to and from the servicer, and loss of media, data or other memory contents. The items listed are not exclusive, but are for illustration only.) ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. If a problem with this unit develops during or after the warranty period, you may contact your dealer or Retro Manufacturing, LLC. 33 REPLACEMENT PARTS If you need replacement parts, visit our website www.retromanufacturing.com, email us at sales@retromanufacturing.com or call 888.325.1555
(See Whats in the Box on page 4 to confirm the part(s) needed). NOTE: If you return a radio to us for credit any missing parts will be debited. Replaceable Items Main Wiring Harness Power Wiring Harness Speaker Wiring Harness Metal Back Strap Metal Hardware Pack Plastic Washer Kit InfiniMount Shaft InfiniMount Brackets (pair) Shaft Covers (pair) Bezel / Faceplate Knobs Purchase Notes Model No. Serial No. Purchase Date Purchased From Record the place and date of purchase for future reference. Keep this information and your sales receipt in a safe place. 34 Copyright 2018 Retro Manufacturing, LLC FCC NOTES 35 INSTALLATION NOTES 36 Copyright 2018 Retro Manufacturing, LLC MODERN SOUND FOR YOUR CLASSIC Retro Manufacturing, LLC, 7470 Commercial Way, Henderson, NV 89011 p) 888.325.1555 | f) 702.483.2229 | www.retromanufacturing.com
1 | ID label and location | ID Label/Location Info | 447.62 KiB | January 24 2022 |
MOTOR 2B
(RCX00002/68MVD-SKD) UNIT BOTTOM VIEW FCC LABEL (38x35MM) m m 5 3 MODEL NO. : MOTOR 2B This device complies with FCC Rules Part 15. Operation is subject to the following two conditions : (1) This device may not cause harmful interference and (2) This device must accept any interference that may be received, including interference that may cause undesired operation. FCC ID : 2 AXWTMOTOR2B 38 mm MODEL NO. : MOTOR 2B This device complies with FCC Rules Part 15. Operation is subject to the following two conditions : (1) This device may not cause harmful interference and (2) This device must accept any interference that may be received, including interference that may cause undesired operation. FCC ID : 2 AXWTMOTOR2B
1 | Confidentiality | Cover Letter(s) | 400.01 KiB | January 24 2022 |
Retro Manufacturing, LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for Confidentiality FCC 1D: 2AXWTMOTOR2B To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Com requesting the Commission to withhold the following attachm disclosure. In case of short-term Confidentiality, public view for a period of _180_ day marketing. Exhibits Long-Term Short-Term Confidentiality | Confidentiality ID Label/Location No No Attestation Statement No No External Photos No x Block Diagram bd o Schematics ki Oo Test Report No No Test Setup Photos No User's Manual a y Internal Photos O &
Parts list{/TuneUp | _o RF Exposure Info Li Li Operational Description & O Cover Letter(s) No No SDR Software / Security Info oO No Above mentioned document contains detailed proprietary information in operation of the e harmful to our company and would give com|
It is our understanding that all measurement test re certification review process cannot be granted as available for public review once the grant of equipm Sincerely, Signature:
Name: Dave Blankenburg Title: Purchasing & inventory Manager Vi C5266091_X10_Ed.1 Date: 2022/01/17 mission's rules (47CFRO.457, 0.459), we are ent(s) as confidential document from public the applicant requests the exhibits selected above are withheld from S from the date of the Grant of Equipment Authorization and prior to system and equipment description are considered as quipment. The public disclosure of above documents might be petitor an unfair advantage in the market. ports, FCC ID label format and correspondent during confidential documents and those information will be ent authorization is issued.
1 | Letter Authorization | Cover Letter(s) | 318.22 KiB | January 24 2022 |
5266091_X8_Ed.1 Letter of Authorization Retro Manufacturing, LLC Company: Retro Manufacturing, LLC Address: 7470 Commercial Way, Henderson, Nevada 89011, United States Product Name: RADIO CONTROL BOX M2B RETRO SOUND Model Number: MOTOR 2B, RetroRadio, Huntington, Apache, Redondo, Newport, Monterey, Santa Cruz, New York, Grand Prix, Denver, Daytona, Detroit, Wonder Bar 1, Wonder Bar 3 FCC Identifier: 2AXWTMOTOR2B We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Dave Blankenburg Date: 2022/01/17 Title: Purchasing & Inventory Manager Signature of applicant:
Vi
1 | Model family declaration | Attestation Statements | 228.78 KiB | January 24 2022 |
Date: 2022-01-17 Declaration of difference To Whom It May Concern:
The Product: RADIO CONTROL BOX M2B RETRO SOUND Model No.: MOTOR 2B, RetroRadio, Huntington, Apache, Redondo, Newport, Monterey, Santa Cruz, New York, Grand Prix, Denver, Daytona, Detroit, Wonder Bar 1, Wonder Bar 3 Products is same
, for those different selling countries or brands will create different models name Cue (e. /
Signatory Name Dave Blankenburg Position Purchasing & Inventory Manager _ Company Name | Retro Manufacturing, LLC Address 7470 Commercial Way, Henderson, Nevada 89011, United States Tel / Fax 702-483-2222 / Extension: 217/ 7024832229 E-Mail Dave@retromanufacturing.com Vi
1 | Power of Attorney Letter | Attestation Statements | 406.40 KiB | January 24 2022 |
Retro Manufacturing, LLC 7470 Commercial Way, Henderson, Nevada 89011, United States DATE : Jan. 17, 2022 Retro Manufacturing, LLC 7470 Commercial Way, Henderson, Nevada 89011, United States Attn: Director of Certification Authority to Act as Agent On our behalf, | appoint below company and person:
Name Damon Hu Position Manager Company Name | Dongguan Dongdian Testing Service Co.,Ltd. Address 17, Zongbu Road 2, Songshan Lake Sci&Tech, Industry Park, Dongguan City, Guangdong Province, China, 523808 Tel / Fax Tel: +86-0769-38826678-850 E-Mail Damon_hu@dgddi.com to act as our agent in the preparation of this application for equipment certification. |
certify that submitted documents properly describe the device or system for which equipment certification is sought. | also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. Applicant name Retro Manufacturing, LLC Address 7470 Commercial Way, Henderson, Nevada 89011, United States Yours sincerely, ne My Name Dave Blankenburg Position Purchasing & Inventory Manager Company Name | Retro Manufacturing, LLC Address 7470 Commercial Way, Henderson, Nevada 89011, United States Tel / Fax 702-483-2222 / Extension: 217/ 7024832229 E-Mail | Dave@retromanufacturing.com
1 | Test setup photos | Test Setup Photos | 348.80 KiB | January 24 2022 / July 20 2022 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-01-24 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2022-01-24
|
||||
1 | Applicant's complete, legal business name |
Retro Manufacturing, LLC
|
||||
1 | FCC Registration Number (FRN) |
0030109045
|
||||
1 | Physical Address |
7470 Commercial Way
|
||||
1 |
Henderson, Nevada 89011
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
e******@applus.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AXWT
|
||||
1 | Equipment Product Code |
MOTOR2B
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
D******** B******
|
||||
1 | Title |
Purchasing & Inventory Manager
|
||||
1 | Telephone Number |
702-4******** Extension:
|
||||
1 | Fax Number |
70248********
|
||||
1 |
D******@retromanufacturing.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Dongguan Dongdian Testing Service Co., Ltd
|
||||
1 | Name |
D**** H****
|
||||
1 | Physical Address |
Dongguan
|
||||
1 |
China
|
|||||
1 | Telephone Number |
86-07********
|
||||
1 |
D******@dgddt.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Dongguan Dongdian Testing Service Co., Ltd
|
||||
1 | Name |
D******** H****
|
||||
1 | Physical Address |
Dongguan
|
||||
1 |
China
|
|||||
1 | Telephone Number |
86-07********
|
||||
1 |
D******@dgddt.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/20/2022 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RADIO CONTROL BOX M2B RETRO SOUND | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Dongguan Dongdian Testing Service Co., Ltd.
|
||||
1 | Name |
M******** Y******
|
||||
1 | Telephone Number |
+86-0********
|
||||
1 |
j******@dgddt.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0031500 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC