FCC ID: 2AY7J-POP3 POP 3 3D Scanner

POP 3 3D SCANNER Quick Start Guide V1.0 Table of Contents Read Before Your First Scan ............................................................................ 2 Software Download ................................................................................. 2 Scanning Dark, Transparent, or Reflective Objects .......................... 2 Scanning Objects with Plain Surfaces.................................................. 3 Color Scanning.......................................................................................... 3 About POP 3 ....................................................................................................... 4 Whats in the Box? ............................................................................................ 5 POP 3 on Windows or macOS Devices .......................................................... 6 System Requirements ............................................................................. 6 Connection Methods ............................................................................... 6 Connecting POP 3 to a PC via USB ....................................................... 6 Connecting POP 3 to a PC via Wi-Fi ...................................................... 8 POP 3 on Smartphones .................................................................................... 9 System Requirements ............................................................................. 9 Connection Methods ............................................................................... 9 Connecting POP 3 to Android Phones via USB ................................ 10 Connecting POP 3 to Phones via Wi-Fi .............................................. 11 Appendix ........................................................................................................... 13 Specifications .......................................................................................... 13 LED Indicators ......................................................................................... 15 Updating the Firmware ......................................................................... 15 Scanner Calibration ............................................................................... 15 Maintenance Instructions .................................................................... 15 Customer Service ................................................................................... 16 2023 REVOPOINT 3D ALL RIGHTS RESERVED 1 POP 3 Quick Start Guide Read Before Your First Scan Software Download To use your Revopoint POP 3 3D Scanner, you must first download the Revo Scan software. You can download it from Revopoints website for Windows and macOS systems. And for Android or iOS smartphones, search for Revo Scan in the Google Play or Apple App Store. To learn more about Revo Scans functions, please check out the user manual in Revo Scan. Scanning Dark, Transparent, or Reflective Objects Like most 3D scanners, the POP 3 will struggle to scan transparent, reflective, or black objects without first lightly coating the object's surface with scanning spray, baby powder, or dry shampoo. Hard-to-scan Surfaces Surface Features Possible Solutions Black or very dark objects Shiny or reflective objects Apply scanning spray or fine powder materials Apply scanning spray or fine powder materials Metal or electroplated surfaces Apply scanning spray or fine powder materials Transparent objects Apply scanning spray or fine powder materials 2 2023 REVOPOINT 3D ALL RIGHTS RESERVED POP 3 Quick Start Guide Scanning Objects with Plain Surfaces Scanning objects with simple geometric features, like a football or wine bottle, requires using Marker stickers or marker points and scanning in Marker Mode. 1. Place the Marker stickers on or around the objects surface irregularly and ensure there are at least 5 Marker stickers per frame for the entire scan, or the scanner will lose track. 2. Alternatively, reference objects (these are any objects with distinct features that can be easily tracked) can be used. Place 1 to 3 reference objects around the item you are scanning for the 3D scanner to track. If doing this, you can use the scanner in Feature tracking mode for the scan. Please scan the QR code to watch a Marker stickers video tutorial. Color Scanning For optimal color scanning, please ensure that the object is evenly lit with soft light and that there are no dark or hard shadows. 2023 REVOPOINT 3D ALL RIGHTS RESERVED 3 POP 3 Quick Start Guide About POP 3 The POP 3 is the next-gen 3D scanner from the POP series with new and improved hardware, design, and usability. The improvements in POP 3's capabilities offer more possibilities for 3D printing, 3D animation design, reverse engineering design, product design, medical health, digitizing historical items, VR/AR, and more. 1. Infrared Fill Light 2. Depth Camera 3. Infrared Fill Light 4. Projector 5. White LED 6. RGB Camera 7. White LED 8. Infrared Fill Light 9. Depth Camera 10. Infrared Fill Light 1. Connection Indicator 2. 3. 4. Decrease Exposure Type-C Port Power Indicator 5. Start/Pause Scan 6. Increase Exposure 7. Quick Setup Board 4 2023 REVOPOINT 3D ALL RIGHTS RESERVED Whats in the Box?

POP 3 Quick Start Guide 1. POP 3 3D Scanner 2. Quick Mount Kit 3. Tripod 4. Phone Holder 5. 2-in-1 Mobile Cable 6. USB Type-C Cable 7. Calibration Board 8. Type-C Adapter 9. Sample Bust 10. Gifts (Markers, Glue Tack, Black Sheet) 11. Mini Turntable 12. Reusable Sticky Pad 13. Extended Table Pcs x4 14. Turntable USB Cable 2023 REVOPOINT 3D ALL RIGHTS RESERVED 5 POP 3 Quick Start Guide POP 3 on Windows or macOS Devices Both Windows and macOS computers are compatible. System Requirements Windows: Win 10/11 (64-bit) Windows 7 is not supported. Memory: 8GB Processor: Intel Core i5 or better Mac with Intel 86 chip: macOS 10.15 and models after Mac with Apple M1 chip: macOS 11.0 and models after Memory: 8GB

* Minimum PC Display Screen Resolution: 1344768 (19201080 is recommended). Connection Methods USB Mode Wi-Fi Mode Windows macOS Connecting POP 3 to a PC via USB Step 1: Screw the Quick Mount Kit onto the Tripod. Step 2: Clip the POP 3 to the top. 6 2023 REVOPOINT 3D ALL RIGHTS RESERVED POP 3 Quick Start Guide Step 3: Connect the USB cable's Type-C end to the POP 3s rear port. Step 4: Plug the Type-A end into a USB 3.0 port or above on your computer. Step 5: Open Revo Scan on your computer. Windows or macOS Notes:

1) Connect the POP 3 to a USB 3.0 port or above (USB 2.0 will not supply sufficient operating power.) Ensure your USB 3.0 port is not damaged or worn out. 2023 REVOPOINT 3D ALL RIGHTS RESERVED 7 POP 3 Quick Start Guide 2) If there is no Type-A port on your computer, use the Type-C Adapter. Windows or macOS Connecting POP 3 to a PC via Wi-Fi Step 1: Power the POP 3 with the Power Bank Handle or an AC adapter.

(Note: Do not plug it into your PC; it will be in USB mode by default.) Step 2: Connect the PC to the POP 3. 1) Go to your Wi-Fi setting, search for the network called POP 3-XXXXXX and connect (No password is required). 2) Wait a few seconds for the scanner to connected. 8 2023 REVOPOINT 3D ALL RIGHTS RESERVED POP 3 Quick Start Guide Windows or macOS Step 3: Open Revo Scan on your computer. POP 3 on Smartphones Android devices can connect via either USB or Wi-Fi. However, iOS devices only support Wi-Fi. System Requirements Android: Android 9.0 Harmony OS is supported. RAM: 6GB iPhone: iPhone 8 Plus or models after iPad: 6th generation iPad or models after System Version: iOS 13.0 Connection Methods USB Mode Wi-Fi Mode Android iOS/iPadOS 2023 REVOPOINT 3D ALL RIGHTS RESERVED 9 POP 3 Quick Start Guide Connecting POP 3 to Android Phones via USB Step 1: Screw the Phone Holder onto the Power Bank. Step 2: Clip the POP 3 to the top of the Phone Holder. Step 3: Pull open the Phone Holders clamps and fit your smartphone. Step 4: Connect the 2-in-1 Mobile Cables Type-C end to the POP 3s port, Type-A to the Power Bank, and Type-C to an Android smartphone. 10 2023 REVOPOINT 3D ALL RIGHTS RESERVED POP 3 Quick Start Guide Connecting POP 3 to Phones via Wi-Fi Both Android and iOS Phones are compatible. Step 1: Power the POP 3 on via the Power Bank Handle or a Socket. 1)Powered by a Power Bank. 2)Powered by a Socket. Power Bank Handle Socket Step 2: Connect the Smartphone to the POP 3. 1) Go to your smartphones Wi-Fi setting, search for the network called POP 3-XXXXXX and connect (No password is required). 2) Wait a few seconds for the scanner to be connected. Power Bank Handle Android or iOS 2023 REVOPOINT 3D ALL RIGHTS RESERVED 11 POP 3 Quick Start Guide Or Socket Android or iOS Step 3: Open Revo Scan on your phone. Note: If you have an iPhone, and want to use the 2-in-1 Mobile Cable to scan, it works like this:

Type-C cable cant connect to iPhones. Wi-Fi For power supply 12 2023 REVOPOINT 3D ALL RIGHTS RESERVED POP 3 Quick Start Guide Appendix Specifications Product Name POP 3 3D Scanner Technology Biocular Dual Camera Infrared Light Single-frame Precision Up to 0.05mm Single-frame Accuracy Up to 0.1mm Single Capture Range 125mm x 225mm Working Distance 150mm - 400mm Minimum Scan Volume 20mm x 20mm x 20mm Scanning Speed Up to 12fps Light Source Class 1 Infrared Light Tracking Methods Feature, Marker Color Scanning Yes Output Formats PLY, OBJ, and STL Point Distance/

Resolution 0.1mm Special Object Scanning Use scanning spray for transparent, dark, or highly reflective objects. Scanning Environment Indoors and Outdoors Outdoor Scanning The POP 3 cannot scan objects well in direct bright sunlight. 2023 REVOPOINT 3D ALL RIGHTS RESERVED 13 POP 3 Quick Start Guide Scanner Dimensions 153mm x 45mm x 29mm 3D Printing Compatible Yes Compatible OS Windows, Android, iOS, macOS Buttons Three touch buttons. Button Functions LED Indicators Start/Pause scanning, adjusting exposure Connection indicator shows the connection status. Power indicator shows the power status. PC Display Screen Resolution

>1344x768

(19201080 is recommended) Wi-Fi Wi-Fi 6 Connection Port USB Type-C Note:

1. Accuracy was acquired in a controlled lab environment. Actual results might vary, subject to the operation environment. 2. Windows 7 is not supported. 3. iOS devices only support Wi-Fi connection. 4. Class 1 Laser: Avoid direct eye exposure for extended periods!

Refer to Standards for Class 1 Lasers for details. 14 2023 REVOPOINT 3D ALL RIGHTS RESERVED LED Indicators POP 3 Quick Start Guide Connection Indicator No light: Not Connected Power Indicator No light: Not Powered Solid blue light: Connected Solid red light: Powered Flashing blue light: Working Flashing red light: Starting Properly Solid green light: Started Successfully Updating the Firmware A pop-up will notify you when you connect your POP 3 to Revo Scan if a firmware update is available. If you want to update your firmware, follow the install wizards prompts and ensure your POP 3 has a stable power supply. Scanner Calibration Your POP 3 3D Scanner was calibrated in the factory and only needs to be recalibrated after a year of use or if the scanned results do not match the specified accuracy. Maintenance Instructions 1. Small parts, such as markers, are dangerous if swallowed. Keep all components out of reach of children and animals to avoid serious injury to them. 2. Store the scanner and all accessories in a cool, dry place away from direct sunlight. 3. Do not allow the scanner to come into contact with or become 2023 REVOPOINT 3D ALL RIGHTS RESERVED 15 POP 3 Quick Start Guide immersed in water or other liquids. Wipe it with a soft, absorbent cloth if it gets wet. Operating a scanner that has gotten wet may cause permanent component damage. 4. Keep the cameras and projector (the two IR cameras, one RGB camera and a projector) clean. Use 95% isopropyl alcohol and a soft cloth to clean them. 5. Handle the scanner with care to avoid hitting the cameras. 6. The operating temperature POP 3 of this product is 0C to 40C (32F to 104F). 7. Do not disassemble the scanner. If there are any problems or questions, contact team at customer@revopoint3d.com. the Revopoint customer service Customer Service If you need any assistance with your scanner, please dont hesitate to contact us at customer@revopoint3d.com or drop us a line at +1 (888) 807-3339 or chat with one of our customer service agents online on our website at www.revopoint3d.com. Click the speech bubble on the bottom right corner of the screen. 16 2023 REVOPOINT 3D ALL RIGHTS RESERVED POP 3 Quick Start Guide Warning The product cannot be returned if the "Warranty Void If Seal Is Broken"

label is damaged or removed. 2023 REVOPOINT 3D ALL RIGHTS RESERVED 17 POP 3 Quick Start Guide This content is subject to change. www.revopoint3d.com If you have any questions about this document, Please contact Revopoint by sending a message to support@revopoint3d.com or our forum https://forum.revopoint3d.com/. 2023 REVOPOINT 3D ALL RIGHTS RESERVED 18 2023 REVOPOINT 3D ALL RIGHTS RESERVED FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body.

Revopoint 3D Technologies Inc Section 2.911(d)(5)(i) Certification Equipment Type Company name: Revopoint 3D Technologies Inc Address: Office 902, 9/F, Tinno Building, Tongfa South Rd, Xili Street, Nanshan District, Shenzhen, 518000, P.R.China. Product Name: POP 3, POP SE FCC ID: 2AY7J-POP3 Model(s): POP 3, POP SE 2.911(d)(5)(i) Equipment Type We, [Revopoint 3D Technologies Inc] (the applicant) certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Yali Liu Date: 2023-06-25 Title and Company name: Manager/ Revopoint 3D Technologies Inc NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Revopoint 3D Technologies Inc Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Revopoint 3D Technologies Inc Address: Office 902, 9/F, Tinno Building, Tongfa South Rd, Xili Street, Nanshan District, Shenzhen, 518000, P.R.China. Product Name: POP 3, POP SE FCC ID: 2AY7J-POP3 Model(s): POP 3, POP SE 2.911(d)(5)(ii) Applicant filing We, [Revopoint 3D Technologies Inc] (the applicant) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Yali Liu Date: 2023-06-25 Title and Company name: Manager/ Revopoint 3D Technologies Inc NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

- Revopoint 3D Technologies Inc. -

Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 4/23/23

[Revopoint 3D Technologies Inc.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2AY7J-TA500]):

Name and company of U.S. agent:REVOPOINT GLOBAL INC. Physical U.S. address of agent:850 New Burton Road,Suite 201,Dover,De 19904,Kent County,USA FRN of U.S. agent:0033693359 Email address of U.S. agent:chiyun@chishine3d.com

[REVOPOINT GLOBAL INC.] acknowledges their obligation to accept service of process on behalf of

[Revopoint 3D Technologies Inc.].

[Revopoint 3D Technologies Inc.] with the FRN [0030680961] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). Sincerely, Signature Yali Liu Manager REVOPOINT GLOBAL INC. 4 0 V

, U

) 7

) d

1 1 9

. 2 _ t n e g A _ S U

l e d o m

_ 8 4 The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

- Revopoint 3D Technologies Inc. -

Signature jun zi zheng Manager REVOPOINT GLOBAL INC. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

Revopoint 3D Technologies Inc Agent Authorization Company: Revopoint 3D Technologies Inc Address:Office 902, 9/F, Tinno Building, Tongfa South Rd, Xili Street, Nanshan District, Shenzhen, 518000, P.R.China. Product Name:POP 3 3D Scanner Model Number(s):POP 3, POP SE Product Description:POP 3 3D Scanner We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Yali Liu Title:

Manager Company: Revopoint 3D Technologies Inc Date: 2023-6-25

Revopoint 3D Technologies Inc Declaration on Model Differences We, Revopoint 3D Technologies Inc Office 902, 9/F, Tinno Building, Tongfa South Rd, Xili Street, Nanshan District, Shenzhen, 518000, P.R.China. Declare that the following product(s):

FCC ID: 2AY7J-POP3 Product Name: POP 3 3D Scanner Model No.: POP 3, POP SE Utilize the identical circuit design, PCB layout, shielding and interface with (POP 3), only the model name different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Authorized person Name: Yali Liu Position: Manager Date of issue: 2023-06-25

*I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

Revopoint 3D Technologies Inc Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AY7J-POP3 Date: 2023-06-25 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Yali Liu Title: Manager

Revopoint 3D Technologies Inc FCC Software Configuration Control Declaration Date: June 25, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number:

POP 3 3D Scanner/ POP 3, POP SE Regarding FCC Country Code Selection guidelines identified in KDB 594280 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Yali Liu Title: Manager Signature of applicant Date: 2023-06-25 FCC Software Configuration Control Declaration Rev1.1