FCC ID: 2AW5W-R316 Dash Camera

R316 User Manual The information in this manual is subject to change without notice. www.rexingusa.com www.rexingusa.com REV012024 Overview Thank you for choosing REXING!

We hope you love your new products as much as we do. If you need assistance, or have any suggestions to improve it, please contact us. care@rexingusa.com

(877) 740-8004 Our support team will respond to you as soon as possible. Always a surprise with Rexing Check us out here. https://www.facebook.com/rexingusa/

https://www.instagram.com/rexingdashcam/

https://www.rexingusa.com/support/registration/

Facebook Instagram Site Product Support 1 Activate Your 18-Month Warranty

& Choose Your Free Gift!

Activate within 30 days of purchase to claim your free gift and extended limited 12-month warranty to 18 months. Scan the QR to Activate &

Select Your Free Gift SCAN ME!

https://www.rexingusa.com/productreg/

1 2 Whats in the box?

1 2 3 4 R316 User Manual The information in this manual is subject to change without notice. www.rexingusa.com www.rexingusa.com REV012024 5 6 7 1. Rexing R316 Dash Cam 2. 64GB Micro SD Card 3. Car Power Connector (12ft) 4. Suction cup mount with GPS module 5. Cable Management Kit 6. Smart Hardwire Kit 7. User Manual 3 Camera Overview 1 2 3 4 5 9 6 8 1. Power Button / Screen Toggle Button 2. Menu Button / Mode Button 3. Up Navigation Button / Wi-Fi on/off /

Emergency Lock Button(Hold) 4. Down Navigation Button

/Microphone on/off(Hold) 5. OK (Confirm) Button / Record Button 4 7 6. USB-C Charging Port 7. Micro SD Card Slot 8. Rear Camera Port 9. Cabin-facing camera Screen Icons Wi-Fi

(OFF) Recording Time

(Current Clip) Loop Recording

(ON) Memory Card Inserted Video Resolution WDR

(ON) MIC

(ON) Recording

(ON) Power Connected 00:06 2,5K+1080+1080 02/05/2024 07:02:55 PM Current Date

(MM/DD/YYYY) Current Time Parking Mode

(OFF) 5 Installation Step 1 Install the Dash Cam Place the suction cup mount and properly orient the mount and lock the suction cup. On the illustration orient the mount as shown. Orient the mount as shown 6 Step 2 Insert the Memory Card The Rexing R316 accepts [Class 10/UHS-1 or higher] Micro SD memory cards up to 256GB. You will need to insert a memory card before you can begin recording. Before inserting or removing a memory card, first ensure youve powered down the device. Gently push the memory card in until you hear a click, and allow the spring release to push the card out. 7 Step 3 Power on the Camera and Format the Memory Card Power on the camera by connecting the charger to the car cigarette lighter and camera. To ensure the R316 records to your memory card properly and without error. Before you start using a new memory card, you must format the card within the camera using the format function. Always backup important data stored on the memory card before formatting. To format the memory card, make sure you have inserted your memory card, then turn on the device by connecting to a power source. Press OK to stop recording. Then press the MENU button twice to enter the System Setup Menu. Use the and buttons and toggle to the Format setting. Press the OK button to confirm the selection. You may now disconnect from power. The camera will shut down after 3 seconds. The camera should begin recording automatically the next time it is powered on. System Settings Light Frequency WDR In-car mirror Back road mirror Format Screen Saver Language Parking Monitor 8 Step 4 Mount the Rear Camera(Optional) Mount the rear camera as shown below. Use rear camera cable to connect the rear camera to the R316 camera. front cabin rear 9 Step 5 Installing the Camera onto the Windshield Place the camera on the mount and carefully route the power cable around the windshield and tuck in under the trim. Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette lighter. Connect car charger to the camera. The camera will auto-start recording once powered on. Route power cable to the Dashcam Plug USB-C Connector to the Dashcam Plug charger into power outlet or cigarette lighter 10 Basic Operation Device Power The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and received a charge (i.e.: the vehicle is started). To turn the device on manually, press and hold the Power button until the welcome screen appears. The camera will automatically start recording when power on. Press and hold the Power button to turn the device on manually Menu Settings Power the camera On. If the camera is recording, press the OK button to stop recording. Press the MENU button once to enter the settings menu. 11 Video Recording The camera will automatically start recording when the device receives charge. The LED lights and red dot will blink device when recording. Press the OK button to stop recording. The camera automatically starts recording when powered on Locked Video To use the Emergency Record Mode, hold the button to manually lock the current video clip. View locked recordings by pressing the menu/playback button. 12 Video Playback Playback of videos can be done on the device or a computer. To playback a video on the device hold M button to toggle to the Playback mode. Use the and buttons to toggle to the desired video. Press the OK button to play. During playback use the OK (pause), (rewind) and (fast forward) buttons to control the video playback. To playback a video on the computer, either use an SD card adapter or connect the device to the computer directly using the USB cable. To playback a video using an SD card adapter, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer. Wi-Fi Connect Step 1 With your dash cam powered on, hold the UP navigation button to enable the Wi-Fi function. The Wi-Fi name (aka the SSID) and password for the dash cam should be displayed on-screen. Wi-Fi Wi-Fi Not Connected SSID: B50D_bb92 Password: 12345678 13 Step 2 On your mobile device, navigate to your Wi-Fi settings. Connect to your dash cam's Wi-Fi by tapping its name when it appears. Enter your dash cam's Wi-Fi password if you are prompted to do so. Note: On same mobile devices, you may have to try to connect more than once. To ensure you've successfully connected, your mobile device's screen should resemble the examples shown. Samsung / Android Example iPhone / iOS Example Step 3 Once you're connected to the dash cam, open the Rexing Connect app on your mobile device. Please select "Keep Trying Wi-Fi" if you see the notification on the right. Step 4 In the app, hit the "Connect" button to connect to your dash cam, allowing you to access live view and view/download your recordings. Note: Press to the UP button to disconnect the Wi-Fi. 14 Rexing Connect App Easily download the app by scanning the QR code below or search via the App Store or Google Play. Wi-Fi Connect Troubleshooting If you bring up the Rexing connect app and cannot connect your phone to the dash cam please go to https://www.rexingusa.com/wifi-connect/

OR scan the QR code below. 15 GPS Logger You can then access this information while playing back your recordings using the GPS Video player (For Windows and Mac, available at rexingusa.com). The dash cam will automatically search for the GPS signal once its connected to the power source. Press the MENU button and go to System Settings. Toggle the GPS Speed Unit setting, and select your favorite speed unit. After a GPS signal is found, the screen icon will turn from disconnected to connected as per the below icons. It will record the speed and location of your vehicle as you drive. GPS Signal (not found) GPS Function Active GPS Date-Time Troubleshooting If your dash cam GPS date and time are incorrect please go to https://www.rexingusa.com/gps-date-time/ OR scan the QR code below. 16 Parking Monitor (Parking Surveillance Mode) Parking monitor provides surveillance on your parked vehicle. When the engine is off, the hardwire kit is used to provide continuous power and protect your car battery from being discharged. Option 1: Vibration Detection To enable the Parking Monitor, you'll need to connect it with a Smart Hardwire Kit. Switched Fuse Hot Fuse Ground This feature will allow the dash cam to switch to parking mode automatically if the vehicles engine turns off and switch back to the normal recording after the vehicles engine turns on. Gravity Sensing Record:

The Gravity Sensing detects significant or sudden movement (such as an impact or collision), it will trigger an event recording. We suggest setting the

"Gravity Sensing" to High sensitivity for Parking Mode Recording. 17 Note:

If you do not use the parking mode function, please change the Gravity Sensing sensitivity to low. Otherwise, the video will easily be locked and the video cannot be deleted by the loop recording function. This will cause the memory card to be full of locked videos and cause the recorder to fail to work normally. Please DO NOT ENABLE the Parking Monitor function in the settings of the dash cam WITHOUT connecting a smart hardwire kit. They may cause a malfunction. Option 2: Motion Detection To use this feature, you need to connect it with a Rexing Intelligent Hardwire Kit (sold separately). Make sure that the Parking Mode is turned off on your dash cam, otherwise it may cause a malfunction. Once the sensor has detected MOTIONS. The intelligent hardwire kit will power up the dash cam automatically and start recording until the MOTION is cleared. Please go to https://www.rexingusa.com/hwk-install/

to watch a video tutorial about the installation or scan the QR code below. 18 Warranty & Support Warranty The Rexing R316 Dash Cam comes with a limited 12-month warranty. If you register your product on our official site

(https://www.rexingusa.com/support/registration), you can extend the limited warranty to 18 months. Support If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at (877) 740-8004. Queries are typically answered within 12-24 hours. Your opinion matters Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions. Connect with us today at care@rexingusa.com Thank you for choosing Rexing!

19 reasonable frequency harmful FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide protection againstharmful interference in a residential installation. This equipment generates, with uses and can radiateradio the there is equipment determined by turning the equipmentoff interference Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is in communications. installation. maycause thatinterference cause harmfulinterference to radio or television reception, which can be instructions, guarantee does energy and, interference occur accordance However, If thefollowing measures:

radio a encouraged if to in one particular installed correct more used user and and this will not not the on, the try no by or to to of is connected. Consult the dealer or an experienced radio/TV technician for help. Caution:

could void your authority to operate this equipment. modications changes Any this or to device not explicitly approved by manufacturer with complies device This conditions:

(1)This interference received, including interference that may cause undesired operation. interference, Operation harmful subject device device Rules. cause may part and FCC this not the

(2) 15 to of is the following two must accept any set with forth for an minimum uncontrolled 20cm distance exposure radiation be installed and limits operated This with complies equipment equipment FCC This environment. should between the radiator and your body. FCCID: 2AW5W-R316 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

34 Ludwig St, Little Ferry New Jersey United States REXING INC. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2024-3-28 We, REXING INC., hereby certify that the equipment for which authorization is sought

(FCC ID: 2AW5W-R316) is not covered equipment prohibited from receiving an equipment authorization pursuant to 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing covered equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, 3 0 V

, U

) i i

d n a

) i

) 5

) d

1 1 9 2 _ u q E d e r e v o C

l e d o m

_ 2 6 Signature Yuhe Sun General Manager REXING INC.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-3-28>

Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products:

FCC ID 2AW5W-R316 Model name R316 For the product stated above, we request that the following information be held confidential;

Exhibits Long-Term Short-Term Short-Term Confidentiality Confidentiality Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos Users Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title Yuhe Sun/General Manager Company:

Address:

Phone:

Fax:

E-Mail:

REXING INC. 34 Ludwig St, Little Ferry New Jersey United States 2032144881 001 2032144881 islandsunyuhe@qq.com

34 Ludwig St, Little Ferry New Jersey United States REXING INC. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

2024-3-28 We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AW5W-R316 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins current valid General Terms and Conditions

(AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Yuhe Sun/General Manager REXING INC. 34 Ludwig St, Little Ferry New Jersey United States 2032144881 001 2032144881 islandsunyuhe@qq.com

REXING INC. 34 Ludwig St, Little Ferry New Jersey United States UNII Device Declaration Letter To whom it may concern:

We have declared below featured for FCC equipment authorization, Device FCC ID: 2AW5W-R316

(1) DFS Device:

Master N/A Client with Radar detection capability Client without radar detection capability,

(2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) 5745-5825 5755-5795 5775-5775 Active Scanning

(the device can transmit a probe

(beacon)) Yes Yes Yes No No No passive scanning

(where the device is can listen only with no probes) No No No Yes Yes Yes

(3) Country code selection ability Yes If yes, pls explain how it was implemented:

No

(4) Meet 15.202 requirement Yes No pls check below :

Ad Hoc Mode capability Access point capability Yes Yes Yes No No No Yes Yes Yes No No No A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network.

(5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply Does not apply

(If apply, pls help to provide explanation on it was implement, and how software was controlled) Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name/Title Yuhe Sun/General Manager Company:

Address:

Phone:

Fax:

E-Mail:

REXING INC. 34 Ludwig St, Little Ferry New Jersey United States 2032144881 001 2032144881 islandsunyuhe@qq.com

REXING INC. 34 Ludwig St, Little Ferry, NJ, 07643 USA. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S. Agent Designation 2024/03/25 REXING INC. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AW5W-R316):

Name and company of U.S. agent:

REXING INC. Physical U.S. address of agent:

34 Ludwig St, Little Ferry, NJ, 07643 USA. FRN of U.S. agent:

0029828688 Email address of U.S. agent:

islandsunyuhe@qq.com REXING INC. acknowledges their obligation to accept service of process on behalf of REXING INC. REXING INC. with the FRN [0029828688] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. 5 0 V

, U

) 7

) d

1 1 9 2 _ t n e g A _ S U

l e d o m

_ 8 4 Signature Yuhe Sun General Manager REXING INC. Sincerely, Signature Yuhe Sun General Manager REXING INC.

34 Ludwig St, Little Ferry New Jersey United States REXING INC. Date: 2024-3-28 FCC ID: 2AW5W-R316 Model Number: R316 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, REXING INC., declare that this EUT (FCC ID: 2AW5W-R316) doesnt have Ad Hoc mode function on non-US/Canada frequencies. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title Company:

Address:

Phone:

Fax:

E-Mail:

Yuhe Sun/General Manager REXING INC. 34 Ludwig St, Little Ferry New Jersey United States 2032144881 001 2032144881 islandsunyuhe@qq.com