FCC ID: M9MHP8058X Multi-Protocol RFID Reader

QUICK START GUIDE pcProx Plus SP Reader 2 This document provides the following information:

I. Connector Options II. Installing the Configuration Utility Software III. Reader Setup IV. Configuring the Reader V. Troubleshooting RF IDeas pcProx Plus SP Reader Congratulations on the purchase of your pcProx or pcProx Plus reader!

Configuration of RF IDeas readers is easy. With our plug and play design, you will be able to quickly take advantage of a more secure environment in your business, school, or organization. RF IDeas products are an integral part of a variety of solutions in every market such as healthcare, manufacturing, government, enterprise and other markets. The number of applications is ever-increasing and we maintain a strong relationship with our robust list of software partners and resellers which are readily found on our website. Please contact our Sales department if you have any questions or are interested in our OEM and Independent Developers programs. For more details about our product line, please visit www.RFIDeas.com/knowledge-center or follow the Support > Learning Center link for more details about our various products. Thank you, The RF IDeas team CONTACT INFORMATION Phone: +1 (847) 870-1723 Toll Free: (866) 439-4884 Fax: (847) 483-1129 Email: Sales@RFIDeas.com Support: TechSupport@RFIDeas.com ADDRESS RF IDeas, Inc. 4020 Winnetka Avenue Rolling Meadows, IL 60008, USA 1. Connector Options There are two connector options available with the reader for data input and output. Connector Type Output Data Type USB DB9 USB Keystroke SDK Virtual Com Port: ASCII or SDK ASCII SDK The product you have purchased may need to be configured before use. The configuration software and support documents can be downloaded from our product support page at:

http://www.rfideas.com/support/product-support The configuration section details the steps necessary to install the configuration utility software and update the configuration to meet your requirements. 2. Installing the Configuration Utility Software To install the configuration utility software, complete the following steps:

1. Verify the system meets the following minimum requirements:

Hardware Pentium class PC Memory 32 MB RAM Disk 25 MB hard disk space I/O 1 available DB9 or USB port, dependent upon the connector Operating System Any operating system that supports a USB keyboard including Microsoft Windows XP, 7, 8, 10 and Linux. Can be used for keystroke applications. 2. Install the pcProx Configuration Utility from the following Web page:

http://www.RFIDeas.com/Software/pcProxConfig/

3. Reader Setup To set up the reader:

3. Plug the connector into the workstations (or available on any peripheral) open RS-232, USB, or Ethernet plug. 4. Place the device next to the monitor, beside the workstation, or where appropriate. 5. The workstation should detect new hardware for USB and DB9 connections. Verify the workstation recognizes this connection using Device Manager. 6. For RS-232 products, verify the correct COM port for RS-232 DB9 connections using Windows Device Manager. 4. Configuring the Reader To configure the Reader for operation, complete the following steps:

7. Start the pcProx Configuration Utility software. 8. Plug the reader into the workstations USB or DB9 port. a. If the reader has a USB connector, verify the workstation detected the connection automatically using Windows Device Manager. b. If the reader has a DB9 connector, verify the correct COM port using Windows Device Manager. 9. If your reader requires a custom configuration, refer to the pcProx Plus/pcProx Enroll Manual for detailed information on the configuring the reader. The manual is available at www.RFIDeas.com > Support >

Product Manuals. 10. After the configuration settings are correctly configured and written/saved to the device, unplug the reader. The reader is now ready for use. Troubleshooting If the device is not working or the following error message is displayed:

11. Check to be sure the device is connected to the USB or RS-232 port. When the workstation is on and no card is being read, the LED is red. A valid proximity card causes the LED to turn green, provided the configuration is not set to only read certain bit lengths. 12. Only one COM port application can own the RS-232 port at a time. Make sure there is not another COM port application running. This prevents our software from seeing the device. 13. Verify the correct model and the software configuration screen agrees with the device attached. 14. Verify the port agrees with the workstation connector. 15. If the device still does not work, disconnect it, remove General USB Device using Windows Control Panel a Add/Remove Hardware. Then reboot the workstation. When the workstation boots up, re-attach the device USB and the OS should re-install the Windows driver automatically. If the device does not read the card, contact the card manufacturer/vendor to verify that the card type is compatible with the device model. Reader Radio Waves Contactless Badge License Agreement and End-User License Agreement End-User License Agreement for RF IDeas SOFTWARE and HARDWARE - RF IDeas pcProx, Proximity Activated Readers, Software Developers Kit, and Proximity Reader DLLs, and Protocol(s). by a licensed end user in accordance with Section 1.1. A single license for the SOFTWARE PRODUCT may not be shared or used concurrently by other end users. IMPORTANT-READ CAREFULLY: This End-User License Agreement

(EULA) is a legal agreement between you (either an individual or a single entity) and the manufacturer RF IDeas (Manufacturer) with which you acquired the RF IDeas software and hardware product(s) identified above

(PRODUCT). The PRODUCT includes the RF IDeas reader, computer software, the associated media, any printed materials, and any on line or electronic documentation. The SOFTWARE PORTION OF THE PRODUCT includes the computer software, the associated media, any printed materials, and any on line or electronic documentation. By installing, copying or otherwise using the PRODUCT, you agree to be bound by the terms of this EULA. If you do not agree to the terms of this EULA, RF IDeas is unwilling to license the PRODUCT to you. In such event, you may not use or copy the SOFTWARE PORTION OF THE PRODUCT, and you should promptly contact the vendor you obtained this PRODUCT from for instructions on return of the unused product(s) for a refund. The products described in this publication are intended for consumer applications. RF IDeas assumes no liability for the performance of product. RF IDeas products are not suitable for use in life-support applications, biological hazard applications, nuclear control applications, or radioactive areas. None of these products or components, software or hardware, are intended for applications that provide life support or any critical function necessary for the support of protection of life, property or business interests. The user assumes responsibility for the use of any of these products in any such application. RF IDeas shall not be liable for losses due to failure of any of these products, or components of these products, beyond the RF IDeas commercial warranty, limited to the original purchase price. SOFTWARE PRODUCT LICENSE: The PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PORTION OF THE PRODUCT is licensed, not sold. 1. GRANT OF LICENSE. This EULA grants you the following rights:

*Software. You may install and use one copy of the SOFTWARE PORTION OF THE PRODUCT on the COMPUTER. *Network Services. If the SOFTWARE PORTION OF THE PRODUCT includes functionality that enables the COMPUTER to act as a network server, any number of computers or workstations may access or otherwise utilize the basic network services of that server. The basic network services are more fully described in the printed materials accompanying the SOFTWARE PORTION OF THE PRODUCT. *Storage/Network Use. You may also store or install a copy of the computer SOFTWARE PORTION OF THE PRODUCT on the COMPUTER to allow your other computers to use the SOFTWARE PORTION OF THE PRODUCT over an internal network, and distribute the SOFTWARE PORTION OF THE PRODUCT to your other computers over an internal network. 1.1 General License Grant. RF IDeas grants to an individual, a personal, nonexclusive license to make and use copies of the SOFTWARE PRODUCT for the sole purposes of designing, developing, and testing your software product(s) that are designed to operate in conjunction with any RF IDeas designed proximity reader product. You may install copies of the SOFTWARE PRODUCT on an unlimited number of computers provided that you are the only individual using the SOFTWARE PRODUCT. If you are an entity, RF IDeas grants the right to designate one individual within your organization to have the sole right to use the SOFTWARE PRODUCT in the manner provided above. 1.2 Documentation. This EULA grants an individual, a personal, nonexclusive license to make and use an unlimited number of copies of any documentation, provided that such copies shall be used only for personal purposes and are not to be republished or distributed (either in hard copy or electronic form) beyond the users premises and with the following exception: you may use documentation identified in the SOFTWARE PRODUCT as the file format specification for RF IDeas proximity readers solely in connection with your development of software product(s) or an integrated work or product suite whose components include one or more general purpose software products. 1.3 Storage/Network Use. You may also store or install a copy of the SOFTWARE PRODUCT on a storage device, such as a network server, used only to install or run the SOFTWARE PRODUCT on computers used 1.4 Sample Code. RF IDeas grants you the right to use and modify the source code version of those portions of the SOFTWARE PRODUCT identified as Samples in the SOFTWARE PRODUCT (Sample Code) for the sole purposes to design, develop, and test your software product(s), and to reproduce and distribute the Sample Code, along with any modifications thereof, only in object code form. 2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS. *Limitations on Reverse Engineering, De-compilation and Disassembly. You may not reverse engineer, decompile, or disassemble the PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation *You may not reproduce or otherwise emulate, in whole or in part, any form the protocol(s) defined within this PRODUCT for use without a RF IDeas PRODUCT Redistributable Code. If you are authorized and choose to redistribute Sample Code

(Redistributables) as described in Section 1.4, you agree to: (a) distribute the Redistributables in object code only in conjunction with and as a part of a software application product developed by you using the PRODUCT accompanying this EULA that adds significant and primary functionality to the SOFTWARE PRODUCT (Licensed Product); (b) not use RF IDeas name, logo, or trademarks to market the Licensed Product; (c) include a valid copyright notice on the Licensed Product;

(d) indemnify, hold harmless, and defend RF IDeas from and against any claims or lawsuits, including attorneys fees, that arise or result from the use or distribution of the Licensed Product; (e) otherwise comply with the terms of this EULA; and (f) agree that RF IDeas reserves all rights not expressly granted. You also agree not to permit further distribution of the Redistributables by your end users except: (1) you may permit further redistribution of the Redistributables by your distributors to your end-

user customers if your distributors only distribute the Redistributables in conjunction with, and as part of, the Licensed Product and you and your distributors comply with all other terms of this EULA; and (2) in the manner described in Section 1.4.

*Separation of Components. The PRODUCT is licensed as a single product. Its component parts may not be separated for use on more than one computer.

*Single COMPUTER. The PRODUCT is licensed with the COMPUTER as a single integrated product. The PRODUCT may only be used with the COMPUTER.

*Rental. You may not rent or lease the PRODUCT without permission from RF IDeas.

*Software Transfer. You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the COMPUTER, provided you retain no copies, you transfer all of the PRODUCT (including all component parts, the media and printed materials, any upgrades, this EULA and, if applicable, the Certificate(s) of Authenticity), AND the recipient agrees to the terms of this EULA. If the PRODUCT is an upgrade, any transfer must include all prior versions of the PRODUCT.

*Termination. Without prejudice to any other rights, RF IDeas may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE PORTION OF THE PRODUCT and all of its component parts. 3. UPGRADES. If the SOFTWARE PORTION OF THE PRODUCT is an upgrade from another product, whether from RF IDeas or another supplier, you may use or transfer the PRODUCT only in conjunction with that upgraded product, unless you destroy the upgraded product. If the SOFTWARE PORTION OF THE PRODUCT is an upgrade of a RF IDeas product, you now may use that upgraded product only in accordance with this EULA. If the SOFTWARE PORTION OF THE PRODUCT is an upgrade of a component of a package of software programs which you licensed as a single product, the SOFTWARE PORTION OF THE PRODUCT may be used and transferred only as part of that single product package and may not be separated for use on more than one computer. 4. OEM COPYRIGHT. All title and copyrights in and to the PRODUCT

(including but not limited to images, photographs, animations, video, audio, music, text and applets, incorporated into the PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE PORTION OF THE PRODUCT, are owned by RF IDeas or its suppliers. The PRODUCT and SOFTWARE PORTION OF THE PRODUCT is protected by copyright laws and international treaty provisions. You may not copy the printed materials accompanying the PRODUCT. OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PURPOSE. Since some states do not allow such exclusion of limitation of incidental or consequential damages for consumer products, check the statute of the state in which your business resides. 5. DUAL-MEDIA SOFTWARE. You may receive the SOFTWARE PORTION OF THE PRODUCT in more than one medium. Regardless of the type or size of medium you receive, you may use only one medium that is appropriate for your single computer. You may not use or install the other medium on another computer. You may not loan, rent, lease, or otherwise transfer the other medium to another user, except as part of the permanent transfer (as provided above) of the SOFTWARE PORTION OF THE PRODUCT. 6. OEM PRODUCT SUPPORT. Product support for the product is not provided by RF IDeas or its subsidiaries. For product support, please refer to the OEM supplies support number provided in the documentation. Should you have any questions concerning the EULA, or if you desire to contact OEM for any other reason, please refer to the address provided in the documentation provided. FOR THE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED WITH THE SOFTWARE PRODUCT PRINTED MATERIALS. Limited Warranty: RF IDeas warrants to the original buyer of this product, that the hardware and related disk(s) are free of defects in material and workmanship for a period of one year from date of purchase from RF IDeas or from an authorized RF IDeas dealer. Should the RF IDeas products fail to be in good working order at any time during the one-year period, RF IDeas will, at its option, repair or replace the product at no additional charge, provided that the product has not been abused, misused, repaired or modified. This warranty shall be limited to repair or replacement and in no event shall RF IDeas be liable for any loss of profit or any commercial or other damages, including but not limited to special, incidental, consequential or other similar claims. No dealer, distributor, company, or person has been authorized to change or add to the terms of this agreement, and RF IDeas will not be bound by any representation to the contrary. RF IDeas SPECIFICALLY DISCLAIMS ALL This warranty gives you the specific legal rights in addition to any rights that you have under the laws of the state in which your business resides or operates. Returns: RF IDeas products which require Limited Warranty service during the warranty period shall be delivered to the nearest authorized dealer or sent directly to RF IDeas at the address below with proof of purchase and a Return Materials Authorization (RMA) Number provided by RF IDeas Technical Support Dept. Replacement parts or complete boards become the property of RF IDeas. If the returned board or unit is sent by mail, the purchaser agrees to pre-pay the shipping charges and insure the board or unit or assume the risk of loss or damage which may occur in transit. The purchaser is expected to employ a container equivalent to the original packaging. Copyright: Copyright by RF IDeas 2017. All rights reserved. Reproduction or distribution of this document in whole or in part or in any form is prohibited without express written permission from RF IDeas. Trademarks: All RF IDeas products are trademarks of RF IDeas. All other product names or names are trademarks or registered trademarks of their respective holders. Applicable Patents: RF IDeas pcProx Plus card readers supporting HID formats retain US Patent No. 5,952,935 and U.S. Patent No. 7,439,862. Disclaimer: This Reference Guide is printed in the U.S.A. Any resemblance mentioned in the Reference Guide to persons living or dead, or to actual corporations or products is purely coincidental. RF IDeas believes that the information contained in this manual is correct. However, RF IDeas does not assume any responsibility for the accuracy of the content of this User Manual, nor for any patent infringements or other rights of third parties. RF IDeas reserves the right to make any modifications in either product or the manual without giving prior written notification. FCC/ISED Compliance Statement ISED French Compliance Statement IC: 6571A-HP8058X (Multi-protocol USB Card Reader)

"Conformment la FCC 15.21 de la rglementation FCC, les changements ne sont pas expressment approuvs par les ides RF peuvent causer des interfrences nuisibles et annuler l'autorisation FCC d'utiliser ce produit. Note: Cet appareil est conforme la Partie 15 des rglements de la FCC et d'Industrie Canada exempts de licence standard RSS (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) Ce dispositif ne doit pas causer d'interfrences nuisibles, et (2) cet appareil doit accepter toute interfrence reue, y compris les interfrences pouvant entraner un fonctionnement indsirable. Ce produit est conforme aux normes FCC OET Bulletin 65 l'exposition aux rayonnements limites dfinies pour un environnement non contrl. Le lecteur peut ne pas reconnatre des cartes de valeur, en prsence de champs RF leves. Si la valeur actuelle est erratique, l'utilisateur doit passer l'tape suivante: Dplacer le matriel de toute metteurs connus proximit. Pour plus d'informations contactez le support technique au 866.439.4884 or TechSupport@RFIDeas.com. FCC ID: M9MHP8058X (Multi-protocol USB Card Reader) Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by RF IDeas might cause harmful interference and void the FCC authorization to operate this product. Note: This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product complies with FCC OET Bulletin 65 radiation exposure limits set forth for an uncontrolled environment. The reader may not recognize value cards in the presence of high RF fields. If the current reading is erratic, the user shall take the following step: Move the equipment from any known transmitters nearby. For more information contact Tech Support at (866) 439-4884 or TechSupport@RFIDeas.com. RF IDeas, Inc. 4020 Winnetka Avenue Rolling Meadows, IL 60008 www.RFIDeas.com Toll Free: 866-439-4884 Voice: 847-870-1723 Fax: 847-483-1129 is a registered trademark of RF IDeas Inc. Trademarks not belonging to RF IDeas are property of their respective companies. 2017 RF IDeas, Inc. All rights reserved. Products are subject to change without notice. 99009230

pcProx Plus, pcProx Enroll &

Wiegand Converter Configuration Utility User Manual 99009010 Rev A.5 Thank You!

Congratulations on the purchase of your pcProx Enroll, pcProx Plus, or Wiegand device(s). RF IDeas hopes you enjoy using the readers as much as we enjoyed creating and developing them. Configuration is easy, so you will be able to quickly take advantage of a more secure environment in your business, school, or organization. Please call our Sales department if you have any questions or are interested in our OEM and Independent Developers programs. We look forward to your comments and suggestions for our product line! Please go to www.RFIDeas.com and follow the Support a Learning Center link for more details about our product line. We are always discovering new applications for our product line(s). There are several software developers licensing our technology so the solution you are looking for may already be developed. Thank you, The RF IDeas Staff Need Assistance?

Ph: 847.870.1723 Fx: 847.483.1129 E: Sales@RFIDeas.com TechSupport@RFIDeas.com Glossary Of Terms ASCII: The American Standard Code for Information Interchange codes represent text in computers, communications equipment, and other devices that use text. Contactless: The high frequency 13.56 MHz smart card technology. FAC: Facility Access Code OEM: The proximity card and badge reader available in self-contained electronic modules for easy system integration. pcProx Contactless: The registered RF IDeas brand name given to all 13.56 MHz contactless card reader products. pcProx Proximity: The registered RF IDeas brand name given to all 125 kHz proximity reader products. Proximity: The low frequency 125 kHz RFID technology. SDK: Software Developers Kit. Software Developers Kits from RF IDeas provide the high level command capabilities to integrate software applications to our devices. Contents 45 45 46 47 50 54 58 59 59 60 63 63 63 Chapter 4: ASCII Command Protocol ASCII Overview Connect Serial Communications Program Command Structure Help Command Variable Command ACP Error Codes Chapter 5: Tips and Troubleshooting Troubleshooting Frequently Asked Questions Precautions Before You Call Technical Support Talking To The Technician 66 67 69 Index Appendix Other Products and Accessories Thank You!

Glossary Of Terms Chapter 1: The Basics Wireless Identification Overview ID Card Reader System pcProx Output Formats Credential Form Factors Card Compatibility Reader Configuration Purposes pcProx Plus & Non-Plus Reader Differences Chapter 2:Hardware Whats In Your Part Number?

Interface (Connectors) USB Readers and Wiegand Converters RS-232 Readers and Converters Minimum System Requirements Reader Set-Up Basics LED Beeper Chapter 3: Software pcProx Configuration Utility Utility Overview Menu Tool bar Icon Tool bar pcProx Plus Configuration Standard Configuration Connect Tab Output Test Area Data Format Tab Delimeters Tab Timing Tab SDK Tab CHUID Tab 2 3 5 5 6 6 7 8 8 8 9 9 10 11 11 11 12 12 13 13 13 14 19 22 23 23 25 26 28 30 31 35 The Basics Wireless Identification Overview pcProx Activated Identification 1 Employers are more security conscious than ever. More buildings, machines, systems, and applications require identification information to gain access. RF IDeas devices allow the building access cards to be used as a digital identifier throughout the workplace. Various pcProx applications include:

Card Enrollment Application log-on Form filler to existing software applications PC/LAN Log On Cafeteria Purchases/Vending Machine Access PLC and embedded controllers Time/Attendance Our pcProx Plus devices are easily configured to increase security and reliability. Companies using proximity and/or contactless technology for building access immediately benefit, as their employee identification cards can also be used with the proximity/contactless device for additional authentication applications. Thus, the majority of deployment and enrollment costs are quickly recovered. The diagram on the following page is a high level overview of how the reader works. The reader sends RF signals to the card and the card sends signals back to send data. The card data is output by the reader in keystrokes or ASCII characters. This card data can be configured to include delimiters to separate the data. This reader can be used as a standalone system or seamlessly integrated with other software applications using the optional Software Developers Kit (SDK). ID Card Reader System Output Formats Credential Form Factors Credentials are inactive electronic devices that rely on readers to supply the required power for start-up and communication. The credential itself, consists of antennas that produce proximity or contactless frequencies. Proximity and contactless smart card technology cards allow users to effortlessly manage multiple applications through a single credential. Data: The data on access cards are a string of binary numbers set with a fixed configuration and length. Frequencies: RF IDeas access control readers and credentials utilize the low-frequency 125 kHz

(proximity) band and/or the high-frequency 13.56 MHz (contactless) band. Credential Form Factors: With over 300 million physical access credentials in use worldwide, there are a variety of low and high frequency form factors customers can choose from to meet their particular needs. The below illustrates some of the various form factors available. CSN: Also known as the Card Serial Number, is part of the ISO 15693 standard for vicinity cards operating at the 13.56 MHz frequency. UID: The User ID or User Identification, can be encoded as data on the card when a security key is needed. Manufacturer/Vendor Card Compatibility Please go to www.RFIDeas.com for specific device part numbers associated to card types. Reader Configuration Purposes The method of encoding data on a card and transmitting data to the reader differs accordingly to each technology involved. The reader itself is not aware of the makeup of the card data format or access privileges for the cardholder. This information is only accessible through the configuration process of the reader utilizing the supplied software. The reader is very flexible and may need to be configured in order to present an exact desired output for the user, such as, singling out FAC or ID, obtaining a desired base (i.e. decimal, lowercase, upper-

case, hexadecimal). Differences Between pcProx Plus Reader Non-Plus Reader The pcProx Plus is a dual frequency programmable reader that combines 125 kHz and 13.56 MHz technologies into the same reader. Its the only reader in the industry that reads two cards of your choice among 35 card types, delivering flexibility to any customer struggling with different card technologies. In contrast to the pcProx Plus reader, our standard pcProx Enroll proximity and contactless readers function on a single frequency band, which is either 125 kHz proximity or 13.56 MHz contactless. Hardware Whats In Your Part Number?

2 All RF IDeas reader part numbers follow a distinct system of categorization to allow for an ease of differentiation between products. Below is the basic part number scheme. RDR -

6 3 8 1 A K U Reader Type Frequency Card Type Model Housing Color Interface Housing Version Reader Type: The reader type distinguishes between standard reader, OEM, converter, mag-stripe, or a kit. Frequency: RF IDeas access control readers are available in low-frequency 125 kHz (proximity) or high-frequency 13.56 MHz (contactless). Card Type: The card type allows for the selection of over 35 different card types for reader compatibility (Please visit www.RFIDeas.com, choose a product and locate the Part Numbers tab for specific device part numbers associated to card types). Housing: This option provides the user to select the form factor housing for the desired reader. The housings include; desktop, wall mount, USB dongle, PCMCIA, bare board, ExpressCard, or custom.

(For more on form factors, please visit www.RFIDeas.com) Model: The model selection corresponds to the type of reader, whether it is a standard, writer

(13.56 MHz contactless only), playback (13.56 MHz contactless only), SDK, or analyzer. Version: The version refers to the selection of either our standard or custom build. Housing Color: The color category simply allows for the selection of either our black or pearl housings. (Applies only to desktop and wall mount housings) Interface: This option specifies the type of connection for the reader (i.e. USB, RS-232, PCMCIA, etc). Interface (Connectors) CTONNECTORS OUTPUT USB Readers and Wiegand Converters The pcProx USB keystroke device operates in two primary modes:

USB keyboard. It reads the card data and sends it as keystrokes as if the user typed the ID data on a keyboard. Under the application programmer interface (API) defined in the pcProx SDK. When it reads card data, the active application receives the entire card data. Note: The pcProx ExpressCard operates as a USB reader. RS-232 Readers and Converters The RS-232, Ethernet, or virtual COM port device operates in two primary modes:

1. ASCII output device. In this mode the user card data is read and sent as a decimal or hexadecimal number in ASCII characters. 2. API defined in the pcProx SDK. The device attaches to a computer serial port. When it reads card data, the active application receives the entire card data. Once the configuration settings are correctly configured and written to flash memory, the device can immediately be deployed. Note: The pcProx PCMCIA operates as an RS-232 reader. Minimum System Requirements Minimum System Requirements HARDWARE Pentium class PC MEMORY 32 MB RAM DISK I/O 25 MB hard disk space 1 available RS-232 or USB Port Operating System Any operating system that supports a USB keyboard including Microsoft Windows 2000, XP, Vista, 7, Server 2003, Server 2008, Linux, Macintosh. Can be used for keystroke applications Note: The software does not perform any data validation checking. The data must be known before it is read to verify its validity. Reader Set-Up Basics Plug the connector into the workstations (or available on any peripheral) open RS-232, USB or Ethernet plug. Place the device next to the monitor, beside the workstation, or where appropriate. The workstation should detect new hardware for USB connections. Verify the workstation recognizes this connection using Device Manager. Verify the correct COM port for RS-232 DB9 connections using Device Manager. When the software is installed, it should recognize these connections in order to configure the appropriate device. Once the device is configured and written to its flash memory, these settings will not have to be configured again. LED Beeper The desktop, USB dongle, wall mount, and bare board (OEM) model readers are all equipped with a light up LED on the front cover. The LED is configurable through the utility software (See LED and Beeper functions in the Software section) to allow the device to produce a beep upon light up of the LED when a credential is detected by the reader. Software pcProx Configuration Utility 3 The pcProx Configuration Utility provides users with the ability to configure their pcProx Enroll, pcProx Plus, or Wiegand devices to meet their needs. Through the configuration process, desired credential data output and access privileges for cardholders can be established. In contrast to the pcProx Enroll readers, for which only one configuration can be programmed into the reader, the utility allows the pcProx Plus configuration process to create two separate configurations for users. Icon Toolbar

(pg.19) Standard Configuration Area

(pg.18) Utility Overview Menu Toolbar

(pg. 14) pcProx Plus Configuration Area

(pg.18) Output Test Area Menu Tool Bar The Menu Tool Bar contains all the basic configuration options for the utility. File The file menu lists the options for Opening .Hwg and Saving .Hwg files. Open .Hwg /.Hwg+ File: Opens either a .Hwg or .Hwg+ file. A .Hwg or .Hwg+ file contains all the configuration settings for the reader. The utility comes with sample .Hwg/.Hwg+ files. Save to .Hwg+ File: Saves the configuration settings to the reader. What is a .Hwg/.Hwg+ file? There are two kinds of configuration files. There is a .Hwg file and .Hwg+ file. A .Hwg file can only be created with previous pcProx application utility ver-

sion. A .Hwg+ file can only be saved using this new utility . A .Hwg+ can configure a pcProx Plus reader as well as a single configuration reader. Exit: Exits out of the entire utility Connect The connect menu provides options for device to utility connections. Auto Connect to USB on Startup: Set as utility default connection. Through this connection the utility searches for a USB connection on startup. Auto Connect to Serial on Startup: With this selection, the utility searches for any available serial connections on startup. Auto Connect to Ethernet on Startup: Utility option to search for ethernet connections on startup. Why use the Auto Connect feature? The utlitys auto connect features allow users to have an easy auto connect through a specified port on startup. Connect: This selection has the utility search for a device connection through all available port connections. Why use the Connect feature? The utlitys general connect option gives users the ability to connect their device to the utility, without the user needing to identify the devices actual interface connection. This feature cycles through all available ports until a device is found. Note: For further information on the connect option, see the connect portion of the Icon Toolbar section on page 19 of this manual.

(Connect--Cont.) Connect to USB: Connects to current specified reader through USB Connect to Serial: Connects to current specified reader through serial Connect to Ethernet TCP/IP: Connects to current specified reader through ethernet TCP/IP Why use the Connect to feature? The connect to feature allows the utility to connect to a device through the specified port upon selection. This is especially helpful when users are switching out and changing devices with different connections. Disconnect: Disconnects all connected devices from every available interface connection from the configuration utility. Note: For further information on the disconnect option, see the disconnect portion of the Icon Toolbar section on page 21 of this manual. Device Menu The device menu lists the options for resetting, writing to, and reading the devices data memory. The device menu options are altered depending on the type of device that is connected. A single configuration reader device has different device menu options than a two configuration reader device. Single Configuration Readers:

Reset to Factory Defaults: Resets all configuration parameters to factory defaults. Read Settings: Displays the current connected device configuration Write Settings: Writes the current configuration settings to the connected device Note: For more information on the Write Settings option, see the Write Settings/Write Active portion of the Icon Toolbar section on page 21 of this manual. pcProx Plus - 2 Configuration Reader:

Reset to Defaults: Resets all configuration parameters to defaults. Defaults are set as HID Prox and RDR-758x Equivalent (covers 5 different card types; HID iCLASS CSN, ISO 14443A CSN, ISO 15693A CSN, MIFARE CSN, MIFARE DESFire CSN) Reset to Stored Settings: This selection allows users to reset the device to their own personally defined stored settings. Write Stored Settings: writes the current configuration settings to stored settings Note: Stored settings are defined as configuration settings created by a user and set/written to the device through the utility as a stored settings.

(Device Menu--Cont.) pcProx Plus - 2 Configuration Reader:

Read Active: Reads the current configuration. Active settings are what allow the device to function. Write Active: Writes the current configuration to active settings. Note: For more information on the Write Active option, see the Write Settings/Write Active portion of the Icon Toolbar section on page 21 of this manual. Note: Device Menu options are altered when a two configuration device (pcProx Plus) is connected to the utility. Navigation Menu The Navigation menu gives users the ability to navigate in and out of the utility tabs through the use of hot keys. This menu lists the hot key commands for the tabs as seen on the Standard Configuration Area (An explanation of each tab can be found in the Standard Configuration Area section of this manual). For example, pressing the F5 key on the keyboard will open the Data Format tab. A Test App hot key command is also available in this list. This command opens any keystroking capturing program (i.e. notepad, wordpad etc) in a new window. The Test App default opening program is set as notepad. View Menu The view menu provides options for altering the appearance of certain functions of the application utility. All the options in this menu are set to appear by default. Show Tooltip Balloon: Menu option for displaying or not displaying the tooltip pop-up balloon. Note: Tooltip balloons appear automatically, or pop up, when the user pauses the mouse pointer over a tool or some other UI element. The tooltip appears near the pointer and disappears when the user moves the pointer away from the tool, or simply waits for a few seconds. The tooltip displays descriptive information of the specific element or tool that the mouse is currently hovering over.

(View Menu--Cont.) Show Text Under Toolbar Icons: Provides option to display or remove text under icons in the Icon Toolbar (For more information on the Icon Toolbar, see the Icon Toolbar section on page 19 of this manual). Show Pop-Up Warning Dialogues: Gives option for user to display or remove warning pop-up dialogue boxes. For example, if the Show Pop-Up Warning Dialogues option is selected, then a warning dialogue box, as seen below, will display on your screen. The below warning dialogue box has been displayed to alert the user that the utility has not detected a connected device. Show Confirm Dialogue: Menu option for displaying yes/no confirmation dialogues before certain utility operations are completed. For example, if the Show Confirm Dialogue option is selected, a confirmation dialogue window will appear when a user clicks to reset their device to factory defaults. Note: If the Show Confirm Dialogue option is not selected, all utility operations will continue upon user selection without the need for confirmation. Beep On Warnings: Provides an audible system beep when warning are detected. Note: With the Beep on Warnings option, the audible beeps will sound even if the Show Pop-Up Warning Dialogues option is not selected. Resize Window: The utility window is designed for users to optionally resize, by making the window larger or smaller (the smallest resize choice will eliminate the view of the Output Test Area). If a user resizes the utility window, clicking this Resize Window option will resize the window to its original size. Help Menu The help menu provides options for which users can seek out additional assistance using the utility and/or device. Read User Manual: Opens the pdf user manual that is bundled in the download with the configuration utility. Note: The user manual can also be found in the directory folder in which the configuration utility was installed. www.RFIDeas.com: This operation will open a new window to the RF IDeas website. Check Website for Software Updates: Clicking this option will take users to a location on the RF IDeas software updates portion of the website, and will detect what version of the pcProxConfig utility is currently in use. Any updates that are available will be listed for easy user download. About: This selections menu options differ when a device is connected to the utility vs. when there is no device connected. Without a connected device the about informational content simply displays the utility version. When a device is connected, the firmware information is also provided. The RF IDeas Tech support email and website address are displayed in both modes. Icon Tool Bar The Icon Tool Bar contains the three most general configuration controls for the utility. These controls are also found in the Menu Toolbar under Connect (for connect and disconnect) and Device (for write settings and write active). Connect Clicking the Connect icon button commands the utility to search for a device through all available port connections. Once the utility detects a device connection, the Device List pull-down menu in the Standard Configuration Area displays the interface connection, firmware and LUID information for the con-

nected device. The model number of the device will be displayed below the Device List pull-down and the Output Test Area will turn from gray to green. Note: More than one device can be connected simultaneously to the utility. To switch between devices, select the desired connected device from the Device List pull-down menu. Device Model Number Device List Pull-down Menu

(Connect--Cont.) If an attempt to connect to a device is made and the utility does not detect a device through any of the available interface connections, a no devices found message will display in the utilitys status bar area. Status Bar Disconnect Clicking the disconnect icon button commands the utility to disconnect from all devices connected through any and all available port connections. Once the utility disconnects from all available device connections, the Device List pull-down menu and device model number are cleared from the Standard Configuration Area and the Output Test Area will turn from green to gray. Additionally, the status bar will display a Disconnected message. Status Bar Message Write Settings/Write Active The Write Settings icon button prompts the utility to write the current defined configuration settings to the device. Since the writing options differ between a single configuration device and a two configuration device (pcProx Plus), the Write Settings icon will change depending on whether a single or two configuration device is connected. When a two configuration device is connected, the icon text will change to read Write Active, as seen below. pcProx Plus Configuration This section is only available to configure selections when a two configuration device (pcProx Plus) is connected to the utility. Note: When a single configuration device is connected to the utility, the pcProx Plus Configuration area is grayed out (as seen below) and selections within this area are not possible. The pcProx Plus Configuration area allows for users to set-up two different configurations for their device. The configurations could be either one 125 kHz and one 13.56 MHz, or two 125 kHz and two 13.56 MHz. The configurations can also be of the same card type. The device is set with two default configuration settings, the HID Prox and RDR-758x Equivalent (covers 5 different card types; HID iCLASS CSN, ISO 14443A CSN, ISO 15693A CSN, MIFARE CSN, MIFARE DESFire CSN). Note: If configuring the system for HID 26 bit and HID 35 bit, remember to set one configuration to read only 26 bits and the other configuration to read only 35 bits. Configuration #

(Number) High Priority Card Type Drop-Down Configuration # (Number): This option provides the ability to switch between configurations. Users can set and edit settings for two separate configurations quickly and easily. Card Type Drop-Down Menu: As stated above, the device is set with two default configuration settings, the HID Prox and RDR-758x Equivalent. This drop-down menu lets users choose the desired card type for their own configuration settings. Each configuration has the ability to have separate card types. High Priority: Provides a pcProx Plus user the ability to give a certain configuration a higher priority than another. This is useful when the user has a population of cards consisting of a combination of 13.56MHz/125kHz cards as well as single-technology cards, and one of those is preferred over the other. The High Priority bit increases the time it takes to read the card. When the High priority bit is set, the reader will try to read that card type 10 times before switching to the other configuration. Standard Configuration This Standard Configuration area provides all the options and details necessary to configure a connected device. USB Ethernet Serial: RS-232 and Virtual COM Connect Tab The connect tab offers the various ways a device can connect to the configuration utility. The different selections allow the user to choose the connection type for the specific logical protocol of their reader. Note: Only one connection type at a time will be shown. USB: Make this selection if the connected device has a USB logical protocol. The utility will then proceed to scan any available USB bus for connected devices. Serial: RS-232 and Virtual COM Ports: This option provides devices that are RS-232 or Virtual COM port logical protocols to connect to the utility. This section scans for RS-232, physical COM port devices, virtual COM port devices, including USB, CDC and PCMCIA devices. When making this selection, the lower and upper limits of the COM ports to scan need to be set. The port values range from 1 to 256. The default COM ports are set at 1 thru 8. Default 1..8: This option sets the COM port values back to the default of 1 and 8. Note: Serial devices may slow when scanning a wide port range.

(Connect Tab--Cont.) Ethernet (Local IP 10.10.10.65): Connects to an Ethernet reader at the given IP address and open a TCP/IP on the given port. The first, second, third, and fourth byte of the TCP/IP address need to be entered for the interface to connect to the reader. The IP port number will also be required. Port Option: Allows for changing the port location. Xport port location needs to match this number Note: Ports below 1024 are for system use only. Find Next IP Button: Looks for other readers on the same ethernet connection. Device List Pull-down: Lists the devices that the utility is actively connected to. For Example, if you have an RJ45 connector (as seen below) then the specific logical protocol connection to be selected is Ethernet. Note: Remember, not all USB interface connections do not necessarily logically connect through USB. If your device has a USB connector, and your device part number suffix is xx0 or xxF, the logical protocol connection is made through COM. A device with a USB interface connector and a part number suffix of xxU will connect through the USB connect option. CONNECTORS Output Test Area Auto GetID Auto Focus Auto Clear Test Button Clear This is the test area for the keystrokes entered by the reader. On serial devices this displays the unsolicited serial port data. The Auto GetID box can be checked for the utility to poll the reader for a card ID every 500msec and displays the results directly under the checkbox, as seen below. Card Data The Auto Focus box keeps the cursor in the test area box to capture the keystrokes output by the device. Note: When the Auto Focus box is checked, it is possible that the selection may conflict with the menus and drop downs, due to the fact that the cursor will attempt to move back into the test area. If this problem arises, simply uncheck the box. The Auto Clear box auto selects all text in the Output Test Area, so that new keystrokes output by the device will replace old text. The Clear button erases all text in the Output Test Area each time the user manually presses the clear button. The Test button (Green Flag) starts the batch file testarea.bat or script testarea to bring up a users own application to view the readers keystrokes. It opens any keystroking capturing program

(i.e. notepad, wordpad etc). Status Bar The status bar (below the Test Area) displays various messages to alert the user of what the utility is doing, as well as connections and disconnections between the utility a device. Status Bar Data Format Tab This tab provides users the ability to format how the data on a card will be keystroked out by the utility. ABC = Pre-Card ID Delimeters- 3 Characters Max 987654321 =

Card ID Value T = Termination Character GN = Card Gone Characters

(When card leaves fields) 123 = Fa Access Code

(FAC) XYZ = Post Card ID Delimeters

(Shared with Pre-Card ID) The above diagram illustrates the various characters that can be displayed upon a card detection by a connected device. The number portions of the diagram are values that are displayed from a card. The letter portions of the character diagram are values that are formatted by the user through the utility and are keystroked from the device. Wiegand to Keystroke Data Format Strip Leading and Trailing Bit Count: By altering the numbers in the leading and trailing bit count, users have the option to strip and discard bits from the card data. The leading and trailing bit counts can be set to range from 0 to 15. Send FAC: (Facility Access Code) Allows for option to display the FAC code Send FAC as Hexadecimal Number: Will send FAC as a hex number. The default is set to output as a decimal. Send ID: This selection keystrokes out the ID portion of the card data. Note: When checked uses the defined ID field bit count bits. When unchecked uses all non parity bits. Send ID as Hexadecimal Number: Will send ID as a hex number. The default is set to output as a decimal. ID Field Bit Count: Sets the number of bits in the ID field from 0 to 80 Fix length FAC/ ID Fields: This option will make the FAC and ID a fixed length FAC Digits: This will alter the FAC output by forcing a set length of digits, between 0 to 32, to be displayed. ID Digits: This will alter the ID output by forcing a set length of digits, between 0 to 32, to be displayed. Advanced Settings Only Read Cards With This Bit Count: Select this option to filter out cards that are not the specified bit number. The bit number is specified in the box to the right and can range from 2 to 255 bits. Display Hex in Lowercase: Will display hex in lowercase format. Note: The Send FAC as Hexadecimal or Send ID as Hexadecimal must first be selected before this option can be provided. Use Numeric Keypad: Defines which keypad will be used (whether across the top or with keypad) AZERTY Keyboard Shift Lock: This selection will output the data as if it were being output from an AZERTY keyboard.

(Data Format Tab--Cont.) FAC Extended Precision Math On: Interprets the FAC data from a card to allow for the proper amount of bits to provide appropriate info. ID Extended Precision Math On: Interprets the ID data from a card to allow for the proper amount of bits to provide appropriate info. Reverse Wiegand Bytes: Reverses data in byte chunks (8 bits = 1 byte) Reverse Wiegand Bits: Reverses each bit Invert Wiegand Bits: Inverts each bit Emulate ProxPro-Append Serial Checksum: This option is only for serial devices. It adds a digit to the end of serial data. It emulates the serial data format to match HID Corp. Prox Pro reader by sending a 2 byte checksum after the card data. Delimiters Tab Use this tab to configure pre and post data delimiters. A delimiter can also be set between the ID and FAC card data. Click the appropriate keyboard icon to select the appropriate corresponding delimiters. ABC = Pre-Data

: = FAC/ID Note: Only 3 pre and post delimiters total can be configured. If 3 pre-delimiters are set, no post delimiters can be set. Pre Data Delimiters (ABC): Select from 0 to 3 characters to display at the beginning of the card data. These characters are shared with the post string of characters. FAC/ID Delimiter (:): Select a character to display between and separate the FAC and ID data.

(Delimiters Tab--Cont.) Post Data Delimiters (XYZ): Select from 0 to 3 characters to keystroke to the end of the card data. These characters are shared with the pre string of characters. Termination Keystroke (T): Adds a keystroke to the end of the card data to signify the end of the card data. Card Gone Delimiters (GN): Adds a keystroke to the end of the card data when the card is removed. Sp1, Sp2, Sp3 =

Special Keys Delimeter Keyboard The Delimter Keyboard is used to select user defined delimeters (keys). Once opened users can:

Left Click : To select desired delimter (key) Left Double Click: To select desired key and auto insert (the Insert button will also insert the key). Right Click: Toggles between keeping the left Shift on or off The selected delimter keys will highlight and appear in the top left corner that is initially labeled

<NONE>. Once a chosen delimter is inserted, the virtual keyboard will close. Revert: Takes user back to previously inserted delimeter choice

<None>: Deletes any selected/inserted delimter Insert: Applies selected delimter to be used Note: Depending on the type of device connected (i.e. serial, FIPS201, etc.), certain keys may be defaulted to highlight upon opening the keyboard. To deselect, simply toggle between your desired delimiter key. Special Keys--Sp1, Sp2, Sp3 There are some additional measures that can be taken to make it more difficult for unauthorized users to reproduce passwords, such as, by adding additional keystroke characters to the card information, that is difficult to re-produce, while configuring the data. These additional characters are labeled as Sp1, Sp2, and Sp3 on the delimeters Virtual Keyboard (For more information on Password Security see page 54). The Sp1, Sp2, and Sp3 keys are used only for keystroking environments to send unprintable characters to a specified application. Timing Tab Use this tab to configure the devices card timing and USB keystroke timing. Card Data Hold Time: This option allows for users to determine in msecs how long they need to wait before the device is able to read the next card in line (which is also how long the LED will remain green after a card read). The timing options can range from 50 to 9950 min/max (50msec increments only) and the default is set to 1000. Note: This is how long the data is available for the SDK user. Continuous Read, Sends Data Upon Read: When a card is placed on a device, this option will al-

low the data to be sent continuously. Lock-Out Time for Repetitive Reads: The time that it takes the reader to read another card. Must be equal to or greater than the hold time and is only done in 50msec increments. Note: For a 2 configuration device (pcProx Plus) the lock-out time is the same as card data hold time. Key Press Time: The length of time the key is held down. The minimum value is 0. The maximum is 640. The default is 20. Key Release Time: Enter the time delay between keystrokes. If set to 0, the reader will output as fast as it can go. The minimum value is 0. The maximum is 640. The default is 20. SDK Tab Use this tab to configure the Software Developers Kit (SDK) functions, as well as enable and disable keystroking. Description Check to disable keystroking. When keystroking or unsolicited serial out is disabled, all card data must be read via the SDK functions. Software Developers Kit Function Disable Keystrokes for SDK

(Halt Keyboard Send) LED The LED section allows users to control the LED light actions on the device to provide users info regarding the card data. Function Description Auto Off Red Green Amber Select this to make the device set the LED color. Select this to set the LED to off Select this to set the LED color to red. Select this to set the LED color to green. Select this to set the color to amber. Logical Unit ID: A user defined 16 bit Logic Unit ID to identify one device from another. Beeper Function Description Enable Beep on Card Read Check this to set the device to beep when a card is read. Beep Now Long Beep(s) Press to listen to the beep the reader will provide when in use. Check the box to configure a long beep of 375 msec. By default the beep is set to a short beep of 125 msec. 2 long beeps or 5 short beeps are allowed only The number value input area to the right of the Long Beep(s) box is designated for the number of beeps to produce when the device is in use. OEM Converter Board Function Description Beeper On (Output Active Low) Check this to turn the device beeper on. Relay On Check this to activate the OEM board. Card ID Function GETID GETID (32) Description Click while scanning a card over the device. The ID displays under the button. This returns 64 bits maximum. Click while scanning a card over the device. The ID displays under the button. This returns 255 bits maximum. GetQueuedID Click to display the last card data read. This returns 255 bits maximum. Clear Lockout Check to clear the time remaining to allow the device to read the next card immediately. Clear UID If clearUID is set, the card and the over run counters will be cleared for the next read. If clearHold is set, the reader will be ready to read another card immediately. GETID Data Display The Most Significant Byte is first 79. The Least Significant Byte is last A1. GETID(32) Data Display GetQueuedID Data Display HH:MM:SS displays 00:00:06 CHUID Tab This tab allows manipulation of all fields on the Federal Information Processing Standard (FIPS) 201, or proximity cards. Use the red buttons to configure additional fields. The fields can be moved to change the order displayed in the binary bit pattern display. Function Define Fields Enable Keyboard Clear Decimal Hex Description Click to select the number of source bits to define the fields. The correct type must be selected to allow for all card bits to be manipulated. Check to enable the highlighted field. This allows the delimiters to be output and the corresponding card field to be processed and output. All green fields are enabled. All red fields are disabled. Click to select key delimiters that are stored in the devices flash memory that precede card data output. Each field may have from 0 14 key strokes. Click to clear keystrokes preceding the card data. Click to display the card field in decimal format. Click to display the card field as a base 16 number in uppercase HEX 0 9 and A F. BCD w/ Parity Displays the card data in binary coded decimal, where each 5 bits represent 1, 2, 4, 8, and parity. FASCN data is always odd parity. Function Description Advanced GetID Start Bit Bits Digits Up Down Click to display the binary bit pattern. Click to display the binary bit pattern captured from the card. Enter a number to define the left most significant starting bit for the field. Enter the number of bits to add to the Start Bit to define the range of bits in the field. This is the number of digits that will display in a selected field. Click to move the highlighted field up one position. Click to move the highlighted field down one position. Advanced Button This displays the bit ranges of the card. Click each field button to display the location of the card binary data. In the example below, the Personal ID starts at bit 111, is 50 bits long, and is 10 digits. The Bit Range is 111 .. 160 and the card bit pattern is highlighted. This output format is displayed in binary coded decimal with parity (BCD with Parity). This is the 245 bit configuration. If any additional keystrokes were entered to precede the card data, click Clear to remove them. Note: The message that displays the number of bytes used and how much room for keystrokes above the Advanced button is determined by the devices flash memory. In this example the configuration is: Keystrokes: 8 of 32 bytes used. Room for 14 keystrokes. Every field is 15 keystrokes maximum. All fields share 96 bytes. The Bit Range that displays to the left of the binary bit pattern is the Start Bit field total + the Bits field total 1. Get ID Click GetID and scan the card to display the output format of the FIPS 201 and proximity card and the interpretation display of the card data. Click GetID to define the fields to set up the device. In this example, The Agency data starts at bit 11, is 16 bits long, and is 5 digits. The location of the agency data is highlighted in the binary bit pattern. The Bit Range is 6 .. 25. The actual card data displays in blue below the binary bit pattern layout. The interpretation of the card data displays in red in the text field. The card data in blue will always be the same. The card data in red changes based on configuration settings flashed to the device. Note: Click Clear to delete the red card data in the text field. A confirmation message will display. The Start Bit changes the actual location of the selected field on the binary bit pattern. Note: The ???? that display to the right of the Digits field indicate the BCD parity is incorrect. Verify the correct field is selected. Change Fields Configuration Click on the appropriate field button and uncheck Enable to remove field data from being displayed. In the example below,the Agency, Persona liD, and Expiration Date fields have been removed. Additional function keys display to configure more fields. lr Define Fields / [1] Enable 11 I Credenti il Num. ]

[ Credential Series ]

Keystrokes below precede ca rd data

<-E=NTE= - ------- ----- . I B

[I!Credentiil Issue]

I Org. Category ]

IOrganizational ID I Keystrokes:7 of 50 bytes used. R.oom for 14 keyst rokes.

[ Person/Org.10 ]

Decimal t) HEX

@ BCD W I Par ty

]IUnti tl ed - Notepad K eys. I

,---:-:;c:c I ,.. Advanced I

= @J iooo!Joooj l Bit Ra nge:

FOS Bit 190 F09 Bi t 235 FlO Bi t 235 F11Bit 245 F12 Bit 245 F13 Bit 245 F14 Bit 245 F15 Bit 245 0Auto focus 1 File Ed;, _Fo<m_t _v;.., H-e--l'p ----------------

1 31.. 50 71 50029 1 1 1 7762 1 e7EB

.0/0,0000 Assign Preceding Keystrokes If Enable is checked for a field, specific keystrokes can be assigned to precede card data output. Note: The Scan Code output for the key selected displays above the list of keys. Click Clear to remove all preceding keystrokes as appropriate. Each single keystroke entered to precede card data equals1 byte of memory. Connect Data format Delmi iters Tming SDK CHU D c_----------------------, I Define fields., ] Enable Key strokesdelimiters below precede card data SystemCode credential...,, I OedenbaiSeries I I/Qedenllal!ssue I Personal ID I o-g. Category I OroarlzaOOnal ID I Petson}Org.ID I Keystrokes: 4 of 26 by tes used.Room for 14 keystrokes. Display mode 0 Dedmal 0 Hex @ BCD +parity Digits to display 0 Where Advanced I I

:#Exp::igra:t:ion Date Start bit-- Number ofbits 1Virtual Keyboard select keycode and modif er(s) Code: 0}1)004 F13Bit245 Move Output test area O AutoGetiD Ready If any special character is selected with a keystroke, this equals 2 bytes of memory. Connect Data format Delimiters r ll'l'ling SDK CHUID c_----------------------, I Oefne fields..

- - '"==-e K_eY'_t_roke _d_eli_mit_e" _b_e_w_p_re_<_ede <a_rd_d_ata

<SHIFT+a >

SvstemCode Credential Nun. Credential series IJCredential Issue Personai.ID Org.CateQOf"y Oroar!zationalID Person}Qrg.10 Keysb"okes: 4 of 26bytesused.Room fur 14keystrokes.

[

Displa y mode Decimal Hex

@ BCD +parity Digits to displa y 0 E:3 Where _

[BliJ Advanced I Number of bits Bit Range: 6 ..25 ill Expi"- tDMea;; Star t bit FllBit F12Bit 24S 11tualKeyboard - se:le:ct keycode: and modifier(s) F13Bit245 Fl4Bit 24S Fl5Bit245 liJ Move OJ!put test area

[J Auto GetiD Ready

[] Keepshifu If all the keystrokes have been assigned to the fields, the following message displays:

Depending on the active document/window, additional functionality can be assigned to a field. For example, if the card data is read in OpenOffice, the Note feature can also be assigned. Select the appropriate field. Click the keyboard icon. Check Left Control. Check Left Alt. Click n. Click Insert. Click Flash to write this configuration to flash memory. Verify the active window is OpenOffice. Scan the card. The Notes function opens when the card is read. The value assigned to the function key in the active document/window determines the output. Note: This configuration utility creates a ComSpecPort.txt file and saves to the default directory. This file can be opened and deleted at will. FIPS 201 Card Configuration In order to configure a FIPS 201 card:

Click Advanced to display the card data in the binary bit pattern to determine bit length and format Click GetID and present the card to the reader Define the fields to match the specific output Configure any additional fields as appropriate Flash the configuration to memory The Advanced button displays:

Start bit location Number of bits for a specific field Number of digits for the field Location of the field within the 245 bit range ASCII Command Protocol ASCII Overview 4 ASCII Command Protocol (ACP) allows the user to talk directly to the device without a DLL or special application. The serial Prox communicates using ASCII commands. Printable ASCII commands at 9600 baud, no parity 1 stop bit, and no echo, can be sent to the device. Note: USB devices that are virtual COM port do not need the baud rate set. The input is buffered by the device and executed when a carriage return (CR) or line feed line feed (LF) is typed. The unit then parses the command and performs the operation, and displays the results or error code. \r\nRF IDeas> where \r represents a CR and \n represents a LF that displays on the command line. All commands begin with the prefix rfid: and end with a Return key, CR or LF. Determine the COM Port Windows Use device manager to display the COM ports. Open the serial COM port. If it is a CDC virtual port, open the newly installed device that was created. Linux Most Linux distributions include Minicom. Download putty (www.putty.org ) to communicate with the serial device if Minicom is not available. After the USB CDC device is enumerated on the Linux machine a device of either /dev/ttyACM0 or

/dev/ttyACM1 is found in the /dev/directory. Minicom users may have to create a symbolic link from

/dev/ttyACM0 to /dev/modem using the command ln -s /dev//tty/ACMO /dev/modem or ln -s /dev/ttyACM1 /dev/modem. Mac OS X The /dev/cu.usbmodemfa211 device is found on a Mac OS X . Use putty to communicate with this device. Connect Serial Communications Program Open putty.exe. Click Connection a Serial and set the Speed (baud) to 9600, Data bits to 8, Stop bits to 1, and Parity to None. Flow control is not needed as there is no software or hardware handshaking. Click Session. Note: Use Hyper Terminal instead of putty with the XP operating system. Highlight the appropriate session. Click Save. Click Apply. Putty opens. Type rfid:help and press Enter. The Help command output displays. The complete list of Help command output is found in this section of the Configuration User Manual. Command Structure Commands are not case sensitive. Characters assigned to variables are case sensitive. All commands begin with a prefix string followed by one or more token strings with a period delimiter character between multiple tokens. Functions must end with a CR or LF. Variables can be assigned a value with an equal sign followed by the value or queried with a question mark. Any control characters other than CR, LF, and backspace terminate the command. The Escape key cancels a command. The general syntax is:

PREFIX TOKEN { DELIMITER TOKEN } { { =Value} | {?} }

The prefix string is rfid:

Command structure falls into one of three groups:

1. Perform a function. 2. Assign a variable. 3. Query a variable. Perform a Function A function performs an operation that may or may not display any results. A function may not be queried. An example of a function is to write the variable settings to flash memory using rfid:cfg.write CR. Certain functions that display a value or series of values display the string between curly braces for easy parsing. For example, the rfid:qid function output displays:

{0x00BB,1,0x0000,80;0x000000801CD1931B2F14}

Assign a Variable There are three types of variables:

1. Boolean 2. Integer 3. Character Examples of Boolean Assignments rfid:op.beep=0 rfid:op.beep=true rfid:op.beep=False rfid:op.beep=F Examples o f Integer Assignment rfid:out.led=0003 rfid:out.led=3 Note: Some integer values require a 16 bit hexadecimal entry. For Example: pcProx Plus card types: rfid:cfg.card.type=0xFFFF Examples of Character Assignment rfid:Delim.Chr.fac=: CR rfid:Delim.Chr.fac=x3a CR Query a Variable Query a single variable to display its current value. Booleans display as true or false. Integers display as 0..255 with leading zero suppression. Characters display as single quoted printable ASCII characters in the range 0x20..0x7E. Values from 0x00 .. 0x1F and 0x7F..0xFF will be with a leading backslash lowercase x and the two digit upper case hex number. The output of the variable displays between curly braces. For example: RF IDeas>rfid:out.led?

{3}

Variables are set and stored in RAM and are lost when the utility is closed. Use the cfg.write function to write the RAM configuration to flash memory. Use the cfg.read function to read the flash memory. Help Command Help displays the commands followed by its data type and expected syntax. The table below displays the Help command output. The functions display in blue. rfid:disp.fac.hex rfid:disp.fac.send rfid:disp.fac.strip rfid:disp.hex.lower rfid:disp.id.digits rfid:disp.id.hex rfid:help (Funtion) rfid:op.beep rfid:op.cont rfid:op.sdk rfid:out.led rfid:qid (Function) rfid:qid.hold rfid:qid.id rfid:qid.id.hold rfid:time.hold rfid:var (Function) rfid:wieg.id.bits rfid:wieg.inv.bits rfid:wieg.qual rfid:wieg.qual.bits rfid:wieg.rev.bits rfid:wieg.rev.bytes rfid:wieg.strip.lead.bits rfid:wieg.strip.trail.bits rfid:beep.now rfid:cfg rfid:cfg.card.hipri rfid:cfg.card.list (Function) rfid:cfg.card.type rfid:cfg.read (Funtion) rfid:cfg.reset (Function) rfid:cfg.write (Function) rfid:chr.1 rfid:chr.2 rfid:chr.3 rfid:chr.count.lead rfid:chr.count.trail rfid:chr.eol rfid:chr.fac rfid:chr.gone.1 rfid:chr.gone.2 rfid:cmd.echo rfid:cmd.prompt rfid:dev.luid rfid:dev.part (Function) rfid:dev.ver (Function) rfid:disp.64bit rfid:disp.fac.64bit rfid:disp.fac.digits Applies only to the pcProx Plus Help Command Summary Command rfid:beep.now Data Type R, W, R/W Definition INT W Sounds the beeper immediately up to 5 short beeps or 2 long beeps. beep.now variables:

1 single short beep 2 two short beeps 3 three short beeps 4 four short beeps 5 five short beeps 101 single long beep 102 two long beeps Command rfid:cfg

( pcProx Plus only) Data Type R, W, R/W Definition INT R/W The pcProx Plus reader has multiple configurations. Each configuration has the settings associated with a card type. When a configuration is changed, all other related settings reflect that configuration number. Example:

To set configuration #1 to keystroke out the card ID preceded by #1/ the following commands would be entered:

rfid:cfg=1 fid:char.count.lead=3 rfid:char.count.lead=0 rfid:char.1=#

rfid:char.2=1 rfid:char.3=/

To then set configuration #2 to precede its card ID with #2/ the following commands would be entered:

rfid:cfg=2 fid:char.count.lead=3 rfid:char.count.lead=0 rfid:char.1=#

rfid:char.2=2 rfid:char.3=/

Enable priority card read. IF True, current configuration is given priority over the alternate configuration View list of supported card types and their hexadecimal entries for the rfid.cfg.card.type command. Verify or Set Card type for current configuration in RAM as 16 bit INT (0x0000..0xFFFF) Note: 0x0000 is off Read the flash memory settings in to RAM. Reset the flash memory to the factory defaults. Write the variables from RAM in to flash memory. 1st card data delimiter character

(A - Z, 0 - 9, a - z or ASCII \0x00 .\0x0D) u 2nd card data delimiter character

(A - Z, 0 - 9, a - z or ASCII \0x00 .\0x0D) u 3rd card data delimiter character

(A - Z, 0 - 9, a - z or ASCII \0x00 .\0x0D) u Verify or Set the leading character count

(0 to 3) u rfid:cfg.card.hipri

( pcProx Plus only) BOOL R/W rfid:cfg.card.list

( pcProx Plus only) Function rfid:cfg.card.type

( pcProx Plus only) INT (hex) R/W rfid:cfg.read rfid:cfg.reset rfid:cfg.write Function Function Function rfid:chr.1 CHAR R/W rfid:chr.2 CHAR R/W rfid:chr.3 CHAR R/W rfid:chr.count.lead INT R/W Command rfid:chr.count.trail Data Type R, W, R/W Definition INT R/W rfid:chr.eol CHAR R/W rfid:chr.fac CHAR R/W rfid:chr.gone.1 CHAR R/W rfid:chr.gone.2 CHAR R/W rfid:cmd.echo BOOL R/W rfid:cmd.prompt rfid:dev.luid BOOL R/W INT (hex) R/W Function rfid:dev.part Function rfid:dev.ver rfid:disp.64bit BOOL rfid:disp.fac.64bit BOOL rfid:disp.fac.digits INT rfid:disp.fac.hex BOOL rfid:disp.fac.send BOOL rfid:disp.fac.strip BOOL rfid:disp.hex.lower BOOL rfid:disp.id.digits BOOL R/W R/W R/W R/W R/W R/W R/W R/W rfid:disp.id.hex rfid:help BOOL Function R/W rfid:op.beep rfid:op.cont BOOL BOOL R/W R/W rfid:op.sdk BOOL R/W rfid:out.led INT R/W Verify or Set the trailing character count

(0 to 3) u Verify or set end of line termination character

( A - Z, 0 - 9, a - z or ASCII \0x00 .\0x0D) Verify or set separating character between the facil-

ity code and ID data( A - Z, 0 - 9, a - z or ASCII \0x00

.\0x0D) Ex: 123 ; 456789 1st character sent when card is removed

( A - Z, 0 - 9, a - z or ASCII \0x00 .\0x0D) 2nd character sent when card is removed

( A - Z, 0 - 9, a - z or ASCII \0x00 .\0x0D) IF True, enable echo of user input and use of backspace key IF True, enable RF IDeas command prompt Verify or set the logical unique identifier as 16 bit INT

(0x0000..0xFFFF) Read the device part number Read firmware version (major . minor . variant) IF True, use 64 bit math on ID data IF True, use 64 bit math on facility code data Verify or set Length of facility code output

(up to 25 digits) IF True, enable facility code output as hex Enable output of facility code Set to True to separate ID and FAC. False processes ID and FAC together. IF True, hex ID data is output in lowercase Verify or Set ID data length (0 to 25 digits) Note: If value is shorter than actual Id length the left most significant digits will be truncated IF True, enable ID data output as hex View menu of commands, summary of output types and variable options Beeper output control True=beep, False=silent Continuous read mode True=continuous output, False=single output of credential data IF True, enable Quiet mode. (IE: Credential data is not displayed) Note: data can still be retrieved using function rfid:qid. LED output control 0=off, 1=red, 2=green, 3=Amber

(Immediate out w\o write) 255=Automatic control by reader (requires write to flash) red on standby, green when credential is read Command rfid:qid Data Type R, W, R/W Definition Function Reads current queued ID data EXAMPLE Output String:

{0x1000,2,0x0000,80;0x000000801DD1910 B2F04}

---Note the use of commas and semicolons--

FORMAT of Output String:

{AGE,OVERRUN,LOCKOUT,BITCOUNT;ID}

AGE (New: Age (in hex) of last card read as a multiple of 48ms. Value stops at 0xFFFF. Use qid.id function to clear the age counter. As shown: the card was read 4,096 (0x1000 hex) x .048 = 196.608 seconds ago or 3 minutes and 16 seconds. OVERRUN counter (Values: 0 through 255):

number of times buffer has been over written with new data without content transfer. LOCKOUT: Time (in multiples of 48ms) re-

maining until another card can be read. BIT COUNT bit length of card data (26 to 255). As shown: The ID contains 80 bits. ID: Card data in hexadecimal. As shown: Card is 80 bits and is 0x000000801DD1910B2F04. Read the card data and reset lockout timer. Once the function is called, a new card can be read immediately after without waiting for the lock out time period to expire. Reads the card data, clears the age, overrun, and bit count after function is called. Combined functions of rfid:qid.hold and rfid:qid.id Verify or set current data hold time setting in multiples of 48ms. (0 - 200) Also controls duration of Green LED during Auto mode. Outputs current command variables in ram

(Similar to a .HWG file.) Output can be cap-

tured, edited and written back into the device. Note: To prevent an input buffer overflow, delay each character by several milliseconds. Verify or set card data output bit count (0- 255) IF True, Invert card data output bits

(1 to 0, 0 to 1) IF True, use wiegand qualifier to verify card bit count rfid:qid.hold Function rfid:qid.id Function rfid:qid.id.hold Function rfid:time.hold INT R/W rfid:var Function rfid:wieg.id.bits rfid:wieg.inv.bits INT BOOL R/W R/W rfid:wieg.qual BOOL R/W rfid:wieg.qual.bits INT R/W rfid:wieg.rev.bits BOOL R/W rfid:wieg.rev.bytes BOOL R/W rfid:wieg.strip.lead.bits INT R/W rfid:wieg.strip.trail.bits INT R/W Wiegand Qualifier: Number of bits (0 - 255) card data must have to be acknowledged as a read IF True, reverse bits of credential output lsb to msb IF True, reverse the bytes of credential output LSB to MSB Leading parity bit count to be stripped from credential data (options: 0 = none, 1 to 142 bits) Trailing parity bit count to be stripped from credential data (options: 0 = none, 1 to 142 bits) Key:

R = read only command W = Write only command R/W = Command can be read for its current value or written with a new value. Note: Value changes are stored in RAM till rfid:cfg.write is used to store the value in to Flash. uThese three commands identify the delimiter characters that can display. Three characters may be divided up as pre and/or post delimiters. The rfid:count.lead command identifies how many of the three characters (chr.1 .. chr.3) display before the card data. For example, if rfid:count.lead is set to 1, only one character displays before the card data and chr.2 and chr.3 can be set as post delimiters. Then rfid:count.trail can have a value of 0, 1, or 2. If rfid:count.lead is 2, chr.1 and chr.2 are set as leading delimiters. Then, only chr.3 can be set as a trailing delimiter. However they are used, the same character location cannot be used for both leading and trailing delimiter. Variable Command The var command displays all variables. The command output can be captured and played back into the device. There must be a delay of several milliseconds after each character or the pcProx serial input buffer overflows. rfid:beep.now rfid:cfg=1 rfid:cfg.card.hipri=True rfid:cfg.card.type=0xEF04 rfid:chr.1 rfid:chr.2 rfid:chr.3 rfid:chr.count.lead=0 rfid:chr.count.trail=0 rfid:chr.eol=\x0D rfid:chr.fac=\x00 rfid:chr.gone.1=\x00 rfid:chr.gone.2=\x00 rfid:cmd.echo=True rfid:cmd.prompt=True rfid:dev.luid=0x0000 rfid:disp.64bit=False rfid:disp.fac.64bit=False rfid:disp.fac.digits=0 rfid:disp.fac.hex=False rfid:disp.fac.send=False rfid:disp.fac.strip=True rfid:disp.hex.lower=

rfid:disp.id.digits=0 rfid:disp.id.hex=False rfid:op.beep=True rfid:op.cont=False rfid:op.sdk=False rfid:out.led=255 rfid:time.hold=20 rfid:wieg.id.bits=16 rfid:wieg.inv.bits=True rfid:wieg.qual=False rfid:wieg.qual.bits=26 rfid:wieg.rev.bits=False rfid:wieg.rev.bytes=False rfid:wieg.strip.lead.bits=1 rfid:wieg.strip.trail.bits=1 These five variables work together to display leading and trailing (pre and post) card data delimiters. 1. rfid:chr.1=\x00 2. rfid:chr.2=\x00 3. rfid:chr.3=\x00 4. rfid:chr.count.lead=0 5. rfid:chr.count.trail=0 The first three commands identify the pre delimiter characters that can display. Three characters may be divided up as pre and/or post delimiters. Count.lead identifies how many of the three characters

(chr.1 .. chr.3) display before the card data. For example, if count.lead is set to 1, only one character displays before the card data and chr.2 and chr.3 can be set as post delimiters. Then count.trail can have a value of 0, 1, or 2. If count.lead is 2, chr.1 and chr.2 are set as leading delimiters. Then only chr.3 can be set as a trailing delimiter. The same character can not be used for both a leading and trailing delimiter. rfid:cfg=1 The pcProx Plus reader has multiple configurations. Each has the settings associated with a card type. When the configuration is changed, all other related settings reflect that configuration number. Example: To set configuration #1 to keystroke out card ID preceded by #1/ the following would be entered. rfid:cfg=1 fid:char.count.lead=3 rfid:char.count.lead=0 rfid:char.1=#

rfid:char.2=1 rfid:char.3=/

And now set configuration #2 to precede its card ID with #2/

rfid:cfg=2 fid:char.count.lead=3 rfid:char.count.lead=0 rfid:char.1=#

rfid:char.2=2 rfid:char.3=/

rfid:chr.eol=\x0D This command sends the End Of Line (EOL) character at the end of the card data. Typically a carriage return (CR) (0x0D) is used. rfid:chr.fac=:

This command sets a delimiter between the FAC and card data. rfid:chr.gone.1=\x0A and rfid:chr.gone.2=@

These commands prompt the device to send the characters x0A and @ when the ID card is removed if they are not 00. rfid:cmd.echo=True This command echoes user input when true and controls if backspace sends a space, backspace, space to erase the last character typed. If false, it is turned off for computer control. This value can be written to flash memory using cfg.write. It defaults to true on cfg.reset. rfid:cmd.prompt=True This command displays the prompt when true. If false, the prompt does not display. This value can be written to flash memory using cfg.write. It defaults to true on cfg.reset. rfid:dev.luid=0x1234 This command sets the logical unit ID. A user-defined 2 byte value to identify this unit. rfid:disp.64bit=False This command uses 64 bit math to computer 64 bit decimal digits. This should always be kept on. If true, it uses 64 bit math. rfid:disp.fac.digits=3 This command truncates or sets the FAC display leading zero. rfid:disp.fac.hex=False This command sends the FAC code in hex when true. If false, the FAC code is sent in decimal. rfid:disp.fac.send=False This command sends the FAC code if true. If false, the FAC code does not display. rfid:disp.fac.strip=False This command separates the FAC from the card data when true so it can be independently formatted for display. If false, the FAC code is not separated from the card data. rfid:disp.id.digits=16 This command sets the digits so the left most significant digits will be truncated. For example, if the card data is 1234 and id.digits=3, then only 234 displays. If the card data = 8 formats the display width by truncating digits or adding leading zeros. rfid:disp.id.hex=False Displays the card data as hexadecimal when true. If false, card data displays as a decimal. rfid:op.beep=True This command sets the device to beep on a successful card read when true. If false, the device will not beep even if the card is successfully read. rfid:op.cont=False This command sets the device to continuously read when true. It tells the device to read the same card data over and over while the card is on the device. If false, the device only sends card data once. rfid:op.sdk=False This command stops the device from displaying the card data when true, so the qid or SDK API call must be used to get the card data. When true the device will send the data via keystrokes or serial depending on device type/model. rfid:out.beep=False This command makes the device beep when true. If false, the device will not beep. This is only available on OEM converter boards. rfid:out.led=255 This command sets the variable and also sets the output LED color in RAM. Use cf.write to write this change to flash memory to persist across power cycles. LED Value Description 0 1 2 3 4..254 255 OFF RED GREEN AMBER Reserved Controlled by the device rfid.out.relay= True This command sets the output driver to ON (active low) when true. This is only available on OEM converter boards. rfid:time.hold=20 This command sets how long in 48ms ticks the data is held for the active ID. This also controls how long the device keeps the LED green in 48 msec ticks. The default time is 20 * 0.048 = 0.960 seconds. Note: The qid.hold resets the internal timer this value initializes. rfid:time.lo=24 This command sets how long in 48ms ticks the card device has to wait for no card in the RF field to begin accepting new card data. This prevents the same card data from being read over and over. If op.cont is true this value has no effect. The default time is 24 * 0.048 = 1.15 seconds. Note: The qid.hold resets the internal timer this value initializes, so that a new card can be read assoon as the data is transferred to the host computer. rfid:wieg.id.bits=80 This command sets byte reversal and also defines the FAC bit size. rfid:wieg.inv.bits=True This command sets all ones to become zero in the Wiegand data. If false, all zeros are set to become a one. rfid:wieg.qual=False This command sets card reading filter to off. If true, card reading filter is on. This is related to the next command, .qual.bits=80. rfid:wieg.qual.bits=80 This command sets the device to read only cards with this many bits. All other size cards are filtered out. rfid:wieg.rev.bits=False This command does not reverse all bits. If true, the least significant bits are swapped with the most significant bits. rfid:wieg.rev.bytes=False This command does not reverse all the bytes in the id.bits size field. If true, all bytes are reversed. rfid:wieg.strip.lead.bits=1 This command strips 0 .. 15 bits from the most significant bits. rfid:wieg.strip.trail.bits=1 This command strips 0 .. 15 bits from the least significant bits. ACP Error Codes ACP Errors Error#1 Error#2 Error#3 Error#4 Descriptions Illegal Command. Will return Try rfid:help. Possible Wrong or missing prefix rfid:

Input buffer overrun. Too many characters received without CR or LF Illegal Operation. - Variable assigned to function or variable used as function Range Error. Value assigned to variable exceeds limit (EX: 257 for 255 limit) Tips and Troubleshooting 5 Troubleshooting If the device is not working or the following error message displays:

1. Check to be sure the device is plugged into the USB or RS-232 port. When the workstation is on and no card is being read, the LED is red. A valid proximity card causes the LED to turn green, provided the configuration is not set to only read certain bit lengths. 2. Only one COM port application can own the RS-232 port at a time. Make sure there is not another COM port application running. This prevents our software from seeing the device. 3. Verify the correct model and the software configuration screen agrees with the device attached. 4. Verify the port agrees with the workstation connector. 5. If the device still does not work, unplug it, remove General USB Device using Windows Control Panel a Add/Remove Hardware. Then reboot the workstation. When the workstation boots up, re-attach the device USB and the OS should re-install the Windows driver automatically. Change the release time to 1000 on the Timing tab for USB keystrokes to slow down the device. Open Notepad or Word and swipe a card to display the card data to see the actions of any non-printable symbols. If the device does not read the card, contact the card manufacturer/vendor to verify that the card type is compatible with the device model. Frequently Asked Questions What types of credentials will your desktop and OEM products work with?

Our products work with virtually all 125 kHz proximity and 13.56 MHz contactless cards in the industry today. The charts below can assist you in determining what RF IDeas products will work with your particular credential. You can reference the RDR part number on our website to get the name of the particular product or you can simply email us at sales@RFIDeas.com with the number and we will contact you. Solutions for Identification:

Solutions for Integrators:

When I present my card to the pcProx Enrollment reader the number displayed is not the number printed on my card or the same number my access control system displays, why?

Check with your supplier for the card format information, since there are some credentials that require a custom format reader. You may possess one of these types of credentials. The pcProx Enrollment readers may need to be configured to output the required credential number, i.e. FAC, ID or CSN using the pcProx Enroll Configuration Utility for USB and RS-232 readers. You can download our configuration program free of charge by cutting and pasting this path into you web browser http://www.rfideas.com/Software/pcProxConfig.exe. Once downloaded please review the Users Manual for configuration instructions. If you have any questions please contact RF IDeas technical support. What software application can I use to view the ASCII output card data from a RDR-6081AKF or RDR-6081AKE?

Since these readers use a virtual COM port, the pcProx Enroll Configuration Utility for USB and RS-232 readers can be used to configure your reader, copy and paste the following path into your web browser and download to your computer. http://www.rfideas.com/Software/pcProxConfig.exe Once downloaded and installed you can use it to configure the readers and view the output data. HyperTerminal or ProComm Plus can also be helpful in viewing card data. What configuration utility do I use to configure the pcProx 125 kHz Enroll, pcProx 13.56 MHz Enroll and Wiegand products?

The products above may or may not require configuration depending on the badge or card type you are using. If you do need to configure them we have a free download. The Configuration Utility for USB and RS-232 readers can be found at http://www.rfideas.com/Software/pcProxConfig.exe What configuration utility do I use to configure the RDR-7P71AKx FIPS 201 reader?

There is currently a beta version called pcProxPlusConfig-Beta.exe for configuring your FIPS 201 reader. Copy and paste the following link into your web browser and the beta version will automatically begin to download http://www.rfideas.com/Software/pcProxPlusConfig-Beta.exe. Please note that this program is a special utility to configure our FIPS 201/long format devices only. Do you have RFID solutions for long read range?

Yes, we have several products that can track a vehicle up to 33 feet and traveling as fast as 120 miles per hour. Go to our website at www.RFIDeas.com, and select products and select the long-range tab for more information. How can I use a proximity card for logon?

One of the fastest growing areas in contactless and proximity technology is what is known as single sign on or SSO for short. We have technology solutions that can assist you in converting your current building access badge into a multifunctional badge for use inside the building. The con-

version will enable you to log in and out of a computer, punch you into the time clock, control multi functional printers and much more. Contact our sales office at 1-866-439-4884 Toll Free to find out more. Can I use your product for tracking meeting registration and training attendance?

Yes. Our products can be used to track training attendance and meeting registration. Contact our sales office at 1-866-439-4884 Toll Free to find out more on how our products can be used for meeting registration, training attendance and many other applications. Why must I poll the USB card reader?

The nature of USB is not event driven per se, it operates on a host/client protocol that during enumeration asks the host to poll at a specific rate. As a keyboard we are polled by the OS every 10msec, the same speed your keyboard and mouse is. We use feature report packets to configure the readers. We also communicate to the DLL API through Feature Reports for HID devices. The AK0 units that are RS-232 or CDC can speak English with using the ASCII COMMAND PROTOCOL such as rfid:help in Hyper Terminal or putty. We recommend you poll the units every 250msec for the card id, except for AK0 unit and this with a QueuedID, as the reader will report the age of the card id up to 52 minutes. Without the SDK the units can send unsolicited card id when the card is in the rf field. These appear as USB keystrokes or Serial data for RS-232 and CDC models. Take a look at the pcProx manuals it may help you get a better idea of the AK0 protocol. The HID is a proprietary binary protocol, where as the AK0 units are open protocol. Precautions Do not mount the device directly on a metal surface. This could interfere with the RF signal and the operation of the device. The device may not recognize valid cards in the presence of high RF fields. If current readings are erratic, take the following step:

Move the equipment from any known transmitters nearby. Contact Technical Support at 866.439.4884 for more information. Before You Call Technical Support Please make sure youve identified your reader model and credential type being used. Have this information ready so that your call will be routed to the correct specialist. For Assistance:

Ph: 847.870.1723 E: TechSupport@RFIDeas.com Talking To The Technician Provide the reader model and credential type being used to the Technical Support Specialist. Explain your problem to the specialist. Be prepared to provide the following information:

- Error messages displayed on the computer

- What you were doing when the problem occurred

- What steps you have taken to resolve the problem, including results from each steps Listen and follow the steps provided by the specialist. Let the specialist know what happens when you perform the steps. END-USER LICENSE AGREEMENT LICENSE AGREEMENT End-User License Agreement for RF IDeas SOFTWARE and HARDWARE - RF IDeas pcProx, Proximity Activated Readers, Software Developers Kit, and Proximity Reader DLLs, and Protocol(s). IMPORTANT-READ CAREFULLY: This End-User License Agreement (EULA) is a legal agreement between you (either an individual or a single entity) and the manufacturer RF IDeas (Manufacturer) with which you acquired the RF IDeas software and hardware product(s) identified above (PRODUCT). The PRODUCT includes the RF IDeas reader, computer software, the associated media, any printed materials, and any on line or electronic documentation. The SOFTWARE PORTION OF THE PRODUCT includes the computer software, the associated media, any printed materials, and any on line or electronic documentation. By installing, copying or otherwise using the PRODUCT, you agree to be bound by the terms of this EULA. If you do not agree to the terms of this EULA, RF IDeas is unwilling to license the PRODUCT to you. In such event, you may not use or copy the SOFTWARE PORTION OF THE PRODUCT, and you should promptly contact the vendor you obtained this PRODUCT from for instructions on return of the unused product(s) for a refund. The products described in this publication are intended for consumer applications. RF IDeas assumes no liability for the performance of product. RF IDeas products are not suitable for use in life-support applications, biological hazard applications, nuclear control applications, or radioactive areas. None of these products or components, software or hardware, are intended for applications that provide life support or any critical function necessary for the support of protection of life, property or business interests. The user assumes responsibility for the use of any of these products in any such application. RF IDeas shall not be liable for losses due to failure of any of these products, or components of these products, beyond the RF IDeas commercial warranty, limited to the original purchase price. SOFTWARE PRODUCT LICENSE The PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. The SOFTWARE PORTION OF THE PRODUCT is licensed, not sold. 1. GRANT OF LICENSE. This EULA grants you the following rights: *Software. You may install and use one copy of the SOFTWARE PORTION OF THE PRODUCT on the COMPUTER. *Network Services. If the SOFTWARE PORTION OF THE PRODUCT includes functionality that enables the COMPUTER to act as a network server, any number of computers or workstations may access or otherwise utilize the basic network services of that server. The basic network services are more fully described in the printed materials accompanying the SOFTWARE PORTION OF THE PRODUCT. *Storage/Network Use. You may also store or install a copy of the computer SOFTWARE PORTION OF THE PRODUCT on the COMPUTER to allow your other computers to use the SOFTWARE PORTION OF THE PRODUCT over an internal network, and distribute the SOFTWARE PORTION OF THE PRODUCT to your other computers over an internal network. 1.1 General License Grant RF IDeas grants to an individual, a personal, nonexclusive license to make and use copies of the SOFTWARE PRODUCT for the sole purposes of designing, developing, and testing your software product(s) that are designed to operate in conjunction with any RF IDeas designed proximity reader product. You may install copies of the SOFTWARE PRODUCT on an unlimited number of computers provided that you are the only individual using the SOFTWARE PRODUCT. If you are an entity, RF IDeas grants the right to designate one individual within your organization to have the sole right to use the SOFTWARE PRODUCT in the manner provided above. 1.2 Documentation. This EULA grants an individual, a personal, nonexclusive license to make and use an unlimited number of copies of any documentation, provided that such copies shall be used only for personal purposes and are not to be republished or distributed (either in hard copy or electronic form) beyond the users premises and with the following exception: you may use documentation identified in the SOFTWARE PRODUCT as the file format specification for RF IDeas proximity readers solely in connection with your development of software product(s) or an integrated work or product suite whose components include one or more general purpose software products. 1.3 Storage/Network Use. You may also store or install a copy of the SOFTWARE PRODUCT on a storage device, such as a network server, used only to install or run the SOFTWARE PRODUCT on computers used by a licensed end user in accordance with Section 1.1. A single license for the SOFTWARE PRODUCT may not be shared or used concurrently by other end users. 1.4 Sample Code. RF IDeas grants you the right to use and modify the source code version of those portions of the SOFTWARE PRODUCT identified as Samples in the SOFTWARE PRODUCT (Sample Code) for the sole purposes to design, develop, and test your software product(s), and to reproduce and distribute the Sample Code, along with any modifications thereof, only in object code form. 2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS. *Limitations on Reverse Engineering, Decompilation and Disassembly. You may not reverse engineer, decompile, or disassemble the PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation *You may not reproduce or otherwise emulate, in whole or in part, any form the protocol(s) defined within this PRODUCT for use without a RF IDeas PRODUCT Redistributable Code. If you are authorized and choose to redistribute Sample Code (Redistributables) as described in Section 1.4, you agree to: (a) distribute the Redistributables in object code only in conjunction with and as a part of a software application product developed by you using the PRODUCT accompanying this EULA that adds significant and primary functionality to the SOFTWARE PRODUCT (Licensed Product); (b) not use RF IDeas name, logo, or trademarks to market the Licensed Product; (c) include a valid copyright notice on the Licensed Product; (d) indemnify, hold harmless, and defend RF IDeas from and against any claims or lawsuits, including attorneys fees, that arise or result from the use or distribution of the Licensed Product; (e) otherwise comply with the terms of this EULA; and (g) agree that RF IDeas reserves all rights not expressly granted. You also agree not to permit further distribution of the Redistributables by your end users except: (1) you may permit further redistribution of the Redistributables by your distributors to your end-user customers if your distributors only distribute the Redistributables in conjunction with, and as part of, the Licensed Product and you and your distributors comply with all other terms of this EULA; and (2) in the manner described in Section 1.4.

*Separation of Components. The PRODUCT is licensed as a single product. Its component parts may not be separated for use on more than one computer.

*Single COMPUTER. The PRODUCT is licensed with the COMPUTER as a single integrated product. The PRODUCT may only be used with the COMPUTER.

*Rental. You may not rent or lease the PRODUCT without permission from RF IDeas.

*Software Transfer. You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of the COMPUTER, provided you retain no copies, you transfer all of the PRODUCT (including all component parts, the media and printed materials, any upgrades, this EULA and, if applicable, the Certificate(s) of Authenticity), AND the recipient agrees to the terms of this EULA. If the PRODUCT is an upgrade, any transfer must include all prior versions of the PRODUCT.

*Termination. Without prejudice to any other rights, RF IDeas may terminate this EULA if you fail to comply with the terms and conditions onn f this EULA. In such event, you must destroy all copies of the SOFTWARE PORTION OF THE PRODUCT and all of its component parts. 3. UPGRADES. If the SOFTWARE PORTION OF THE PRODUCT is an upgrade from another product, whether from RF IDeas or another supplier, you may use or transfer the PRODUCT only in conjunction with that upgraded product, unless you destroy the upgraded product. If the SOFTWARE PORTION OF THE PRODUCT is an upgrade of a RF IDeas product, you now may use that upgraded product only in accordance with this EULA. If the SOFTWARE PORTION OF THE PRODUCT is an upgrade of a component of a package of software

`

programs which you licensed as a single product, the SOFTWARE PORTION OF THE PRODUCT may be used and transferred only as part of that single product package and may not be separated for use on more than one computer. 4. OEM COPYRIGHT. All title and copyrights in and to the PRODUCT (including but not limited to images, photographs, animations, video, audio, music, text and applets, incorporated into the PRODUCT), the accompanying printed materials, and any copies of the SOFTWARE PORTION OF THE PRODUCT, are owned by RF IDeas or its suppliers. The PRODUCT and SOFTWARE PORTION OF THE PRODUCT is protected by copyright laws and international treaty provisions. You may not copy the printed materials accompanying the PRODUCT. 5. DUAL-MEDIA SOFTWARE. You may receive the SOFTWARE PORTION OF THE PRODUCT in more than one medium. Regardless of the type or size of medium you receive, you may use only one medium that is appropriate for your single computer. You may not use or install the other medium on another computer. You may not loan, rent, lease, or otherwise transfer the other medium to another user, except as part of the permanent transfer (as provided above) of the SOFTWARE PORTION OF THE PRODUCT. 6. OEM PRODUCT SUPPORT. Product support for the product is not provided by RF IDeas or its subsidiaries. For product support, please refer to the OEM supplies support number provided in the documentation. Should you have any questions concerning the EULA, or if you desire to contact OEM for any other reason, please refer to the address provided in the documentation provided. FOR THE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO YOUR PARTICULAR JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED WITH THE SOFTWARE PRODUCT PRINTED MATERIALS. Limited Warranty: RF IDeas warrants to the original buyer of this product, that the hardware and related disk(s) are free of defects in material and workmanship for a period of one year from date of purchase from RF IDeas or from an authorized RF IDeas dealer. Should the RF IDeas products fail to be in good working order at any time during the one-year period, RF IDeas will, at its option, repair or replace the product at no additional charge, provided that the product has not been abused, misused, repaired or modified. This warranty shall be limited to repair or replacement and in no event shall RF IDeas be liable for any loss of profit or any commercial or other damages, including but not limited to special, incidental, consequential or other similar claims. No dealer, distributor, company, or person has been authorized to change or add to the terms of this agreement, and RF IDeas will not be bound by any representation to the contrary. RF IDeas SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PURPOSE. Since some states do not allow such exclusion of limitation of incidental or consequential damages for consumer products, check the statute of the state in which your business resides. This warranty gives you the specific legal rights in addition to any rights that you have under the laws of the state in which your business resides or operates. Returns: RF IDeas products which require Limited Warranty service during the warranty period shall be delivered to the nearest authorized dealer or sent directly to RF IDeas at the address below with proof of purchase and a Return Materials Authorization (RMA) Number provided by RF IDeas Technical Support Dept. Replacement parts or complete boards become the property of RF IDeas If the returned board or unit is sent by mail, the purchaser agrees to pre-pay the shipping charges and insure the board or unit or assume the risk of loss or damage which may occur in transit. The purchaser is expected to employ a container equivalent to the original packaging. Copyright:

Copyright by RF IDeas 2013. All rights reserved. Reproduction or distribution of this document in whole or in part or in any form is prohibited without express written permission from RF IDeas. Trademarks: All RF IDeas products are trademarks of RF IDeas. All other product names or names are trademarks or registered trademarks of their respective holders. Applicable Patents: RF IDeas pcProx Plus card readers supporting HID formats retain US Patent No. 5,952,935 and U.S. Patent No. 7,439,862. Disclaimer: This Reference Guide is printed in the U.S.A. Any resemblance mentioned in the Reference Guide to persons living or dead, or to actual corporations or products is purely coincidental. RF IDeas believes that the information contained in this manual is correct. However, RF IDeas does not assume any responsibility for the accuracy of the content of this User Manual, nor for any patent infringements or other rights of third parties. RF IDeas reserves the right to make any modifications in either product or the manual without giving prior written notification. FCC ID: M9MBUPCPROXH100 (HID RS-232 model) FCC ID: M9MBUPCPROXA100 (AWID) FCC ID: M9MPCPROXP100 (Pyramid) FCC ID: M9MRDR7P71 (FIPS 201 13.56 MHz) FCC ID: M9MRDR7L81 (Legic 13.56 MHz) FCC ID: M9MRDR7580 (iCLASS MIFARE and Other 13.56 MHz) FCC ID: M9MRDR7081AKF (iCLASS MIFARE and Other 13.56MHz) FCC Compliance Statement FCC ID: M9MPCPROXHUSB100 (HID USB model) FCC ID: M9MPCPROXM101 (Indala model) FCC ID: M9MRDR6X8X (Kantech, Indala, Casi-Rusco) FCC ID: M9MPCPROXC101 (Casi-Rusco model) FCC ID: M9MRFID1856I100 (MIFARE/iCLASS models) FCC ID: M9MRDR7081 (iCLASS Module based) FCC ID: M9MRDR7581 (iCLASS MIFARE and Other 13.56 MHz) FCC ID: M9MRDR7081AKE (iCLASS MIFARE and Other 13.56MHz) FCC ID: M9MRDR75DX (iCLASS MIFARE and Other 13.56 MHz) FCC ID: M9MRDR758X (iCLASS MIFARE and Other 13.56 MHz) FCC ID: M9MRDR8XX8U (Plus combo model) FCC ID: M9MRDR8058X (Multi-protocol Combo model) FCC ID: M9M8058XCCL (Multi-protocol and Contact model) FCC ID: M9M758XCCL (MIFARE and Contact model) FCC ID: M9M7580CCL (MIFARE and Contact model) FCC ID: M9MRDR80081 (Plus SIO Combo Model) FCC ID: M9MRDR70EX (13.56 MHz Express Model) FCC ID: M9MRDR60DX (125kHz USB Dongle Model) FCC ID: M9MLC608X (125 kHz USB Model) FCC ID: M9MSB708X (iCLASS 13.56 MHz) FCC ID: M9MOEM805NX (Multi-protocol Combo model) FCC ID: M9MSB6X8X (Multi-protocol 125 kHz) FCC ID: M9MSB758X (Mifare 13.56MHz) FCC ID: M9MLC60DX (125 kHz USB Model) FCC ID: M9MLC6T8X (132 kHz USB Model) FCC ID: M9MLC608XU0 (125 kHz Virtual Com Model) FCC ID: M9MLC758X (13.56 MHz USB Model) FCC ID: M9MLC6X8X (Multi-protocol 125kHz) FCC ID: M9MLC8058X (Multi-protocol Combo model) FCC ID: M9MLC8058XU (Multi-protocol Combo model) FCC ID: M9MHP8058X (Multi-protocol Combo model) Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by RF IDeas might cause harmful interference and void the FCC authorization to operate this product. FCC ID: M9MLC6X11U (125kHz USB Model) Note: This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product complies with FCC OET Bulletin 65 radiation exposure limits set forth for an uncontrolled environment. The reader may not recognize value cards in the presence of high RF fields. If the current reading is erratic, the user shall take the following step: Move the equipment from any known transmitters nearby. For more information contact Tech Support at 866.439.4884. Index A B C D E F G H I 3, 5, 11, 45. 49, 51-52, 61-62, 69 40 45, 58 ACP ASCII Assign Preceding Keystrokes Auto Clear Auto Focus Auto GetID 25 25 25 Beep Beeper Bit (26) Format Structure 12, 17 32 67 8 Card Compatibility 30 Card Data Hold Time Change Fields Configuration Clear Button COM Complex Passwords Connectors Continuous Read 10, 24 68 30 25 11-12, 23-24, 45, 59, 61 39 Data Delimiters Delimter Keyboard Device List 19, 21, 24 28-29 29 Emulate Prox Pro Ethernet ExpressCard 11 28 11-12, 14-15, 23-24 3, 26-29 FAC Factory Defaults FIPS 201 37, 44 15, 17 GETID GetQueuedID 25, 33, 36-37, 44 33-34 High Priority Bit

.HWG 14 22 Icon Toolbar 19 19-20 21 Connect Disconnect Write Active Write Settings 27 ID Digits 21 21 Key Press Time Key Release Time 30 30 LED 30-31 Lock-Out Time Logical Unit ID 30 32 Manufacturer Card Compatibility

(See Card Compatibility) MIFARE Minimum System Requirements 15, 22 11 3, 9, 12, 32, 56-57, 60 OEM One-Factor Security Output Test Area 68 25 68 Password Security PCMCIA 11 pcProx Playback pcProx Plus (2 Configuration Reader) 9, 68-69 5, 8, 13-16, 21-22, 30 RS-232 9, 11-12, 23, 59, 61-62 SDK Serial 3, 5, 9, 11, 30-31, 50, 52, 56, 62 7, 11, 14-15, 23, 25, 28-29, 31, 45-46, 54, 56 Special Keys Special1 Special2 Special3 29 29 29 Start Bit 36, 38, 44 Termination Keystroke Test Button Tool Tip Balloon Two-Factor Security 25 16 26, 29 68 USB 11-12, 14-15, 23-24, 29-30, 45, 59, 61-62, 69 K L M O P R S T U W 11, 13, 27-28, 53-54, 57, 61, 67, 69 Wiegand Wiegand Bits Wiegand Bytes Wiegand to Keystroke Data 28 28 27 Appendix Standard 26 Bit Format Structure There are several bits constructed together that comprise data sent from the proximity card to the device. There are numerous bit formats and lengths for proximity cards. The most popular is a 26 bit card format. The typical layout for this format is 24 bits of usable information as the first and last are parity bits to ensure data integrity. The 26 bit format consists of 255 possible facility codes. Within each facility code there is a total of 65,535 unique card numbers. The standard 26 bit Wiegand format is H10301. It is binary encoded data. The format consists of 2 parity bits, 8 bit facility code (F) and 16 bit card number fields (B). This format displays below. PFFFFFFFFBBBBBBBBBBBBBBBBP EXXXXXXXXXXXX............. ............XXXXXXXXXXXXO Bit Coding P = Parity O = Odd Parity E = Even Parity X = Parity mask F = Facility code, range = 0 to 255 B = Card Number, range = 0 to 65,535 In general, the 26 bit format is the industry standard format. Primary benefits of this include:

Open format Convenient to order Universal access control panel acceptance The sale of this format is not limited to any one company yet the range of card numbers available in this format is limited. There is a potential for card numbers to be duplicated. Please go to www.RFIDeas.com and follow the Support a Learning Center a Proximity Card Formats link for more details. The card manufacturer may also have additional details about the card format. Use the pcProx Device for Password Security - Complex Passwords It is possible with certain limitations, to use the proximity token as a password for an application or operating system log on. The unique card bit-stream converted to either decimal or hexadecimal becomes the entire or a portion of the password. Enroll this card data to the password of the operating system application for the user. Since the proximity token has no read/write memory there is no way go change this or write alphanumeric characters such as a user name to the proximity token. Some examples are shown below. Please see RF IDeas pcProx Playback Starter Kit or call the Sales Department if this capability is needed. Several companies have adopted a policy that requires users to change their password every xx number of days to increase security. The PIN is the portion of the password the user changes every xx number of days. Since the card data is completely numeric, any alpha and upper/lower case letter constraints are handled in the user supplied PIN. A two-factor authentication system is made up of:

1. Card ID data 2. Personal Identification Number (PIN) The device may be configured to allow operation under either a one or two-factor authentication system. One-Factor In a one-factor system, the user simply scans the ID card. The device may be configured to add TAB keystrokes ahead of the data as well as a TAB or ENTER keystroke after the card data. Two-Factor The two-factor approach is especially useful when insisting on password construction rules or periodic changing of passwords. In a two-factor system, the user may enter the PIN either before or after the card data. If the user adds the PIN before the card data, the device may be configured to append the ENTER keystroke. Pre and Post Characters There are some additional measures that can be taken to make it more difficult for unauthorized users to reproduce passwords. Adding additional keystroke characters to the card information, that is difficult to re-produce, while configuring the data. These additional characters are labeled as Sp1, Sp2, and Sp3 on the delimeters tab menu selections. Other Products & Accessories Software Developers Kit Allows independent developers to use their application to read proximity access badge Read ID data of more than 1 billion cards in the field PVC Label Proximity Card Credit card size with paper release liner, 500 cards per box Proximity Cards, Labels, Key Fobs Complete selection of various manufacturers proximity cards, labels and key fobs. Marked with data code and ID number, available in several Wiegand formats pcProx Read/Write Contactless Reads and writes directly to the smart cards pcProx Writer and Playback Desktop read-only for iCLASS and NXP and smart cards pcProx Playback Starter Kit Plays back card sector data in ASCII or keystrokes pcProx Sonar Presence detector configured as a keyboard PS/2 to USB Power Tap Powers a USB RF IDeas device from a PS/2 port Mounting Brackets Further adjust the standard mounting of the device angle 69 RF IDeas Inc. 2013 RF IDeas. All rights reserved. Specifications subject to change without notice. Windows, Macintosh, Solaris, Sun Ray and Linux are trademarks of their respective companies. All other trademarks, service marks and product or service names are property of their respective owners. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. RF IDeas assumes no responsibility with regard to the performance or use of these products. All understandings, agreements, or warranties, if any, take place directly between the vendors and the prospective users. Please feel free to call, e-mail or visit our web site for a full list of applications, products, configuration options, supported cards and form factor specifications. Our web site includes application videos, support materials, case studies and detailed information about our product line. Every effort has been made to ensure that the information in this manual is accurate. RF IDeas is not responsible for printing or clerical errors.