RL-UM02 Product Specifications WLAN 11b/g/n USB module (1T1R) Version: 1.0 http://www.rf-link.net Overview UM02 is a WLAN 11n USB module, which fully supports the features and functional compliance of IEEE 802.11n,e and i standards. It supports up to 150Mbps high-speed wireless network connections. It is designed to provide excellent performance with low power Consumption and enhance the advantages of robust system and cost-effective. It is targeted at competitive superior performance, better power Management applications. Features
* Operates in 2.4 GHz frequency bands
* Data rates: up to 150Mbps
* 802.11e-compatible bursting and I standards
* BPSK, QPSK, 16 QAM, 64 QAM modulation schemes
* WEP, TKIP, and AES, WPA, WPA2 hardware encryption schemes http://www.rf-link.net General Specification RL-UM02 WLAN 11n USB module Realtek RTL8188CTV 802.11b/g/n, 802.3, 802.3u 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 150Mbps Model Product Name Major Chipset Standard Data Transfer Rate Modulation Method Frequency Band 2.4~2.4835 GHz ISM Band BPSK/ QPSK/ 16-QAM/ 64-QAM Spread Spectrum IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g/n:OFDM (Orthogonal Frequency Division Multiplexing) RF Output Power < 13dBm@11n,< 18dBm@11b,< 14dBm@11g Operation Mode Ad hoc, Infrastructure 11B 11Mbps -86dBm@8%, 5.5Mbps -88dBm@8%, 2Mbps -90dBm@8%
1Mbps -91dBm@8%
11G 54Mbps -73dBm@10%, 48Mbps -73dBm@10%
36Mbps -76dBm@10%
24Mbps -79dBm@10%
18Mbps -82dBm@10%
12Mbps -85dBm@10%
9Mbps -87dBm@10%
6Mbps -88dBm@10%
11N HT20 MCS0 -88dBm@10%
MCS1 -85dBm@10%
MCS2 -82dBm@10%
MCS3 -79dBm@10%
MCS4 -76dBm@10%
MCS5 -73dBm@10%
MCS6 -70dBm@10%
MCS7 -68dBm@10%
11N HT40 MCS0 -86dBm@10%
Receiver Sensitivity http://www.rf-link.net MCS1 -84dBm@10%
MCS2 -81dBm@10%
MCS3 -78dBm@10%
MCS4 -75dBm@10%
MCS5 -72dBm@10%
MCS6 -69dBm@10%
MCS7 -66dBm@10%
Operation Range Up to 180 meters in open space LED Windows 2000,XP32-64,Vista 32/64,Win7 32/64,Linux,Mac, Android, WIN CE WEP, TKIP, AES, WPA, WPA2 USB 2.0 DC3.3V Normal Internet maximum power dissipation in 120MA
-20 ~ +60 C ambient temperature
-10 ~ 70C ambient temperature 5 to 90 % maximum (non-condensing) 30.4x 15.4 x 14mm (LxWxH) +-0.2MM OS Support Security Interface Power Consumption Operating Temperature Storage Temperature Humidity Dimension http://www.rf-link.net Dimensions:
The PCB tolerances within + / -0.2 or so PIN Definition http://www.rf-link.net TOP BOT http://www.rf-link.net
http://www.rf-link.net DC Characteristics Symbol VD3.3A, VD3.3D Parameter Minimum Typical Maximum Units 3.3V I/O Supply Voltage 3.1 3.3 3.5 1.6 V V mA VD15A, VD15D 1.5V Supply Voltage 1.4 1.5 IDD3.3V 3.3V Rating Current
-
-
500 http://www.rf-link.net Power Consumption Parameters 3.3V Supply Voltage 1.5V Supply Voltage Receiving Tests the biggest receive Sym Vc33 Vc15 Conditions Min Typ Max Unit 3.1 1.4 3.3 1.5 3.5 V 1.6 V 113 125 138 152 2 MA MA MA MA MA MA 3.3V Current Consumption Icc33rx H40MCS7 3.3V Current Consumption Transmission Biggest transmission test 3.3V Current Consumption Icc33rx OFDM 54M Icc33tx H40 MCS7 3.3V Current Consumption The depth waits for an opportunity Icc33tx Icc33tx/rx OFDM 54M Deep sleep Ic33tx/rx 2 http://www.rf-link.net USB interface electrical characteristics http://www.rf-link.net Regulatory Information The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following:
Contains Transmitter Module FCC ID: A5LRL-UM02 When the module is installed inside another device, the user manual of this device must contain below warning statements;
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This modular could be installed in the fix or mobile devices only, installed in the portable device, like USB dongle like transmitters is forbidden. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in any portable device. FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.