RL-UM12BS V1.0 Product Specifications WLAN 11b/g/n USB module (1T1R) Version: V1.0 http://www.rf-link.net Overview UM12BS is a WLAN 11n USB module, which fully supports the features and Functional compliance of IEEE 802.11n,e and i standards. It supports up to 150Mbps high-speed wireless network connections. It is designed to provide excellent performance with low power Consumption and enhance the advantages of robust system and cost-effective. It is targeted at competitive superior performance, better power Management applications. Features
* Operates in 2.4 GHz frequency bands
* 1x1 technology improves effective throughput and range existing 802.11 b/g products
* Data rates: up to 150Mbps
* 802.11e-compatible bursting and I standards
* BPSK, QPSK, 16 QAM, 64 QAM modulation schemes
* WEP, TKIP, and AES, WPA, WPA2 hardware encryption schemes http://www.rf-link.net General Specification RL-UM12BS V1.0 WLAN 11n USB module Realtek RTL8188EUS 802.11b/g/n, 802.3, 802.3u 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90,120 and maximum of 150Mbps BPSK/ QPSK/ 16-QAM/ 64-QAM 2.412~ 2.462 GHz IEEE 802.11b: DSSS (Direct Sequence Spread Spectrum) IEEE 802.11g/n:OFDM (Orthogonal Frequency Division Multiplexing)
< 13dBm@11n,< 18dBm@11b,< 14dBm@11g Ad hoc, Infrastructure 11Mbps -86dBm@8%,54Mbps -73dBm@10%,130Mbps
-66dBm@10%
Up to 180 meters in open space Windows 2000,XP32-64,Vista 32/64,Win7 32/64,Linux,Mac, Android, WIN CE WEP, TKIP, AES, WPA, WPA2 USB 2.0 DC3.3V Maximum power dissipation in 80MA
-20 ~ +60C ambient temperature
-10 ~ 70C ambient temperature 5 to 90 % maximum (non-condensing) 129032 x 12.1920 x 1.6mm (LxWxH) +-0.2MM Model Product Name Major Chipset Standard Data Transfer Rate Modulation Method Frequency Band Spread Spectrum RF Output Power Operation Mode Receiver Sensitivity Operation Range LED OS Support Security Interface Power Consumption Operating Temperature Storage Temperature Humidity Dimension http://www.rf-link.net Dimensions:
The PCB tolerances within + / -0.2 or so PIN Definition http://www.rf-link.net Physical map
UM12BS There are Red, Black, Yellow and Blue four color PCB for option. Above shows the Blue PCB.
Packaging Appearance Figure http://www.rf-link.net External antenna reference design http://www.rf-link.net DC Characteristics Symbol Parameter Minimum Typical Maximum Units VD33A, VD33D 3.3V I/O Supply Voltage VD15A, VD15D 1.5V Supply Voltage IDD33 3.3V Rating Current 3.1 1.4
3.3 1.5
3.5 1.6 400 V V mA http://www.rf-link.net Power Consumption Parameters 3.3V Supply Voltage 1.5V Supply Voltage Receiving Tests the biggest receive Sym Vc33 Vc15 Conditions Min Typ Max Unit 3.1 1.4 3.3 1.5 3.5 V 1.6 V 3.3V Current Consumption Icc33rx H40MCS7 3.3V Current Consumption Transmission Biggest test 3.3V Current Consumption transmission Icc33rx OFDM 54M Icc33tx H40 MCS7 3.3V Current Consumption The depth waits for an opportunity Icc33tx Icc33tx/rx OFDM 54M Deep sleep Ic33tx/rx 65 70 80 85 2 2 MA MA MA MA MA MA USB interface electrical characteristics http://www.rf-link.net Regulatory Information The devices must be installed and used in strict accordance with the instructions as described in the user documentation that comes with the product. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following:
Contains Transmitter Module FCC ID: A5LRTL8188EUS When the module is installed inside another device, the user manual of this device must contain below warning statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This modular could be installed in the fix or mobile devices only, installed in the portable device, like USB dongle is forbidden. This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. For manufacturer:
The end product into which the module will be installed should be the fix or mobile devices only, the portable device, like USB dongle is forbidden. The end product into which the module will be installed should be installed and operated with a minimum distance of 20 cm between the radiator and user body.