all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
user manual | Users Manual | 1.11 MiB | January 02 2012 | |||
1 | Cover Letter(s) | January 02 2012 | ||||||
1 | Test Report | January 02 2012 | ||||||
1 | External Photos | January 02 2012 | ||||||
1 | Internal Photos | January 02 2012 | ||||||
1 | ID Label/Location Info | January 02 2012 | ||||||
1 | Cover Letter(s) | January 02 2012 | ||||||
1 | Test Report | January 02 2012 | ||||||
1 | Cover Letter(s) | January 02 2012 | ||||||
1 | Cover Letter(s) | January 02 2012 | ||||||
1 | Test Report | January 02 2012 | ||||||
1 | Test Setup Photos | January 02 2012 |
1 | user manual | Users Manual | 1.11 MiB | January 02 2012 |
Annex no. 5 Functional Description /
User Manual State: 2010-03-01 Vers. no.: 1.10 m. dudde hochfrequenz-technik Rottland 5a D-51429 Bergisch Gladbach/ Germany Tel. +49 2207-96890 Fax +49 2207 968920 RML-HFMR102 Installation Manual RFID Canada 2011-12-01 Installation Manual RML-HFMR102 Note Copyright 2011 by RFID Canada 25 Valleywood Drive Unit 19 Markham, Ontario L3R 5L9 Canada http://www.rfidcanada.com With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document, and giving it to others and the use or communication of the contents thereof are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Composition of the information in this document has been done to the best of our knowledge. RFID Canada does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing of incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. RFID Canada does not give any guarantee promise for perfect function in cross environments. RFID Canada call explicit attention that devices which are subject of this document are not designed with components and testing methods for a level of reliability suitable for use in or in connection with surgical implants or as critical components in any life support systems whose failure to perform can reasonably be expected to cause significant injury to a human. To avoid damage, injury, or death, the user or application designer must take reasonably prudent steps to protect against system failures. RFID Canada assumes no responsibility for the use of any information contained in this document and makes no representation that they free of patent infringement. RFID Canada does not convey any license under its patent rights nor the rights of others. This manual is to be used with the complete system consisting of reader, specified antennas, cables and power supply. OBID and OBID i-scan are registered trademarks of FEIG ELECTRONIC GmbH.. my-d is a registered trademark of Infineon Technologies AG I-CODE is a registered trademark of Philips Electronics N.V. Tag-itTM is a registered trademark of Texas Instruments Incorporated. RFID Canada Page 2 of 26 1 2 Installation Manual RML-HFMR102 Contents Safety Instructions / Warning - Read before start-up!
Performance Features of the readers 5 6 2.1 Available Reader types .................................................................................................6 2.2 Optional accessories ....................................................................................................6 3 Assembly and Wiring 7 3.1 Housing versions ..........................................................................................................7 3.1.1 Dimensions .................................................................................................................7 3.2 Module version ..............................................................................................................8 3.2.1 Dimensions .................................................................................................................8 4 Connections 9 4.1 Antenna terminal ANT 1..............................................................................................10 4.1.1 DC Voltage supply on antenna connector ANT1 ......................................................10 4.2 Power supply ...............................................................................................................11 4.2.1 Power supply via X1 .................................................................................................11 4.2.2 Power supply via PoE (Power over Ethernet) on X4 (RML-HFMR102-PoE)..............12 4.3 Power supply and interface connection on X2 (RML-HFMR102-A/-B).......................13 4.3.1 RS232 Interface (RML-HFMR102-A)..........................................................................13 4.3.2 RS485 Interface (RML-HFMR102-B)..........................................................................14 4.4 Ethernet-Interface on X2 (10/100Tbase) ....................................................................15 4.5 USB Interface X3 (Host communication)................................................................15 5 Control and display elements LED 16 5.1 LED ...............................................................................................................................16 6 Technical Data 7 Radio Approvals ELECTRONIC GmbH Page 3 of 26 17 19 Installation Manual RML-HFMR102 7.1
..................................................................................................................19 7.2
..................................................................................................................20 7.3 USA (FCC) and Canada (IC)........................................................................................21 7.3.1 Radio approvals ........................................................................................................21 8 9 UL Approval - USA and Canada Annex 22 23 9.1 Accessories .................................................................................................................23 RFID Canada Page 4 of 26 Installation Manual RML-HFMR102 1 Safety Instructions / Warning - Read before start-up !
The device may only be used for the purpose intended by the manufacturer. The operation manual should be kept readily available at all times for each user. This manual is to be used with the complete system consisting of reader, specified antennas, cables and power supply. Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude the manufacturer of any liability. The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the manual or automatically set parameters for a device or for an incorrect application of a device. Repairs may only be undertaken by the manufacturer. Installation, operation, and maintenance procedures should only be carried out by qualified personnel. Use of the device and its installation must be in accordance with national legal requirements and local electrical codes . When working on devices the valid safety regulations must be observed. Before touching the device, the power supply must always be interrupted. Make sure that the device is without voltage by measuring. The fading of an operation control (LED) is no indicator for an interrupted power supply or the device being out of voltage!
Special advice for wearers of cardiac pacemakers:
Although this device doesn't exceed the valid limits for electromagnetic fields you should keep a minimum distance of 25 cm between the device and your cardiac pacemaker and not stay in the immediate proximity of the devices antenna for any length of time. This product requires professional installation by trained qualified personnel. This product is custom manufactured by R. Moroz Limited only. This product is installed by R. Moroz LTD trained staff or distributed by R. Moroz Ltd. to authorized system integrators only. The manufacturing and distribution process is fully controlled by R. Moroz Ltd. R. Moroz Ltd. grants authorization only to system integrators that have trained professional installers on staff and make on going commitment to maintaining trained installation staff. R. Moroz Ltd. grants authorization only to dealers that formally commit to controlling the installation process according to the installation instructions and by professional trained staff. The intended use of this product is generally not for the general public. It is generally for industry/commercial use. This device will be used in non-residential environments. RFID Canada Page 5 of 26 Installation Manual RML-HFMR102 2 Performance Features of the readers The Reader RML-HFMR102 is designed for reading passive data carriers, so-called Smart Labels at an operating frequency of 13.56 MHz. The RML-HFMR102 is suitable for all applications in which moderate reading distances are re-
quired. Also required is an external antenna connected to the Reader. An anti-collision function enables simultaneous reading of up to 30 transponders per second. The Reader electronics is contained in a plastic housing having an IP30 enclosure rating. 2.1 Available Reader types The following reader types are currently available:
Reader type RML-HFMR102-A RML-HFMRM102-A RML-HFMR102-B RML-HFMR102-PoE RML-HFMR102-USB Description Housing version with asynchronous RS232 interface Module version with asynchronous RS232 interface Housing version with asynchronous RS485 interface Housing version with LAN interface and Power over Ethernet Housing version with USB-interface RML-HFMRM102-USB Module version with USB- interface Table 1: Reader types 2.2 Optional accessories Optional Accessories are listed in the attachment. RFID Canada Page 6 of 26 Installation Manual RML-HFMR102 3 Assembly and Wiring 3.1 Housing versions The Reader is designed for an office environment. Notes:
The distance between two readers of the same type should not fall below 4m. Before any installation the intended position of the reader should be tested for its suit-
ability. 3.1.1 Dimensions Figure 1: Dimensions of the housing version (all dimensions are in mm) RFID Canada Page 7 of 26 Installation Manual RML-HFMR102 3.2 Module version This reader version has been designed for mounting in other equipment. Notes:
The distance between two readers of the same type should not fall below 4m. Before any installation the intended position of the reader should be tested for its suit-
ability. 3.2.1 Dimensions 137 125 107,5 7 7 5 6 X1 X2 X3 X4 LED 5
, 9 2 ANT1 5
, 4 5 8 9 6 E F 68,5 Figure 2: Dimensions of the module version (all dimensions in mm) RFID Canada Page 8 of 26 Installation Manual RML-HFMR102 4 Connections Depending on the reader variant different connectors are available. Figure 3: Connection overview displays the arrangement and the Table 2: Connectors shows which connector can be used for the different interface cable. RML-HFMR102-A/-B X2 RML-HFMR102-
PoE RML-HFMR102 X4 X1 ANT 1 RML-HFMR102-USB X3 X1 Figure 3: Connection overview Connector ANT 1 X1 X2 X3 X4 Description Antenna terminal ANT 1 (Impedance 50Ohm) Power supply 12 - 24VDC RS232 / 485 Interface USB Interface 10/100Tbase Ethernet interface with RJ-45 (PoE) Table 2: Connectors RFID Canada Page 9 of 26 Installation Manual RML-HFMR102 4.1 Antenna terminal ANT 1 A SMA socket is provided on the circuit board for connecting the external antenna. The maximum tightening torque for the SMA socket is 0.45 Nm. Caution:
Higher tightening torque will damage the connector. Terminal Description X4 Connecting the external antenna
(input impedance 50 ) Table 3: Connecting the external antenna Note:
The input impedance for the antenna must be calibrated to a value of 50 (15 15). The antenna is to be used at a minimum distance of 20cm to any metal parts. Otherwise there is a danger that the reader will be damaged.. The optimum operating Q factor of the antenna should be in a range of QB = 10...20. To determine the operating Q the antenna must be supplied with a 50 Ohm source such as a network analyzer or frequency generator. When connecting an antenna, ensure that it does not exceed the permissible limits pre-
scribed by the national regulations for radio frequency devices. 4.1.1 DC Voltage supply on antenna connector ANT1 The reader is able to provide a DC voltage on the antenna output ANT1. With this DC voltage a external LED can be supported for example. Note:
This DC voltage (7.5V 1V) is designed for low current (max. 5mA) only. Only antennas can be used which are designed for DC voltage and do not short cut DC voltages. For the connection of other devices (e.g. VSWR-Meter) it is necessary to check if DC voltage is allowed. This DC voltage is not sufficient for powering the ID ISC.DAT tuning board. RFID Canada Page 10 of 26 Installation Manual RML-HFMR102 4.2 Power supply 4.2.1 Power supply via X1 Connect the 12-24 V DC/
supply voltage to socket X1 on the circuit board. Terminal X1 / inside Name Vcc Description Vcc supply voltage (+) X1 / outside GND Ground supply voltage (-) X 1 Table 4: Connecting the supply voltage Note:
Reversing the polarity of the supply voltage may destroy the device. The unit has to supplied by specified Power supply, only Power supply recommendations:
To take full advantage of the Reader performance, you must use a sufficiently regulated and low-
noise power supply. When using a switching power supply, be sure that its internal switching fre-
quency is less than 300 kHz. See also: Accessories Part No. Description. Power Supply 95 - 265V AC Input Voltage,
(North American Plug), with angular DC Plug 2,5mm*5.5mm Output: 12 V DC/
Ambient Operating Temperature: 0C to +40C
; 700mA Table 5: Recommended power supply Note:
The power supply is supplied with a DC/
the readers socket X1. plug 2.5mm x 5.5mm. This is compatible with RFID Canada Page 11 of 26 Installation Manual RML-HFMR102 4.2.2 Power supply via PoE (Power over Ethernet) on X4 (RML-HFMR102-PoE) Optional the reader (only MR102-PoE) can be powered via the LAN connector on X4 with the use of a PoE Power over Ethernet power supply according to IEEE802.3af*, Class2 (6,49 Watt). The DC supply can be achieved via the free pins 4,5 and 7,8 (Midspan-Power). Also a Phantom Powering (Inline-Power) via the signal pins 1,2,3,and 6 is possible. X4 Figure 4: LAN and PoE connection Note:
It must be ensured that the reader is supplied with 42,5 V DC (48 V DC cable losses) at least. The maximum cable distance for Ethernet is 100m. A connection of the PoE Port X4 to devices at outside building installation (e.g. con-
nected to the outside plants) is not allowed. It is recommended to use a shielded twisted pair STP CAT5 cable.
* For detailed technical information regarding the 802.3af standard, please refer to the most recent edition of the corresponding IEEE specification. Name ID NET.PoEI13W-A Description Power over Ethernet Supply 100-240V AC
(North American Plug), Output: 48V DC/
; 0.5A Table 6: Recommended PoE Power Supply RFID Canada Page 12 of 26 Installation Manual RML-HFMR102 4.3 Power supply and interface connection on X2 (RML CAB.RS-DB) For the power supply connection and the connection of the asynchronous interface RS232 / 485 the reader provides a 9-pin D-Subminiature female connector.
(See also Connections). X2 2 3 5 7 9 1;4;6;8 Interface
Power supply TxD / B-
RxD / A+
GND GND Vcc n.c. Table 7: Connection assignment of the connector X2 For this reader a serial cable with integrated DC connector is available. Description RML CAB.RS-DB Table 8: Serial data cable 4.3.1 RS232 Interface (RML-HFMR102-A) Interface parameter can be configured via software protocol (e.g. ISOStart) RFID Canada Page 13 of 26 Installation Manual RML-HFMR102 4.3.2 RS485 Interface (RML-HFMR102-B) Interface parameter can be configured via software protocol (e.g. ISOStart) For bus operation the Reader can be assigned a bus address using software. Addresses are assigned by the host computer. Using the software, addresses 0 to 254 can be assigned to the Reader. Note:
Since all Readers are factory set with Address 0, you must connect and configure them one after the other. If a termination of the RS485 bus is necessary it must be done externally. RFID Canada Page 14 of 26 Installation Manual RML-HFMR102 4.4 Ethernet-Interface on X2 (10/100Tbase) The Reader has an integrated 10 / 100 base-T network port for an RJ-45. Connection is made on X2 and has an automatic Crossover Detection according to the 100BASE-T Standard. With structured cabling CAT 5 cables should be used. This ensures a reliable operation at 10 Mbps or 100 Mbps. The prerequisite for using TCP/IP protocol is that each device has a unique address on the net-
work. All Readers have a factory set IP address. Interface parameter can be configured via soft-
ware protocol (e.g. ISOStart). Network Address IP-Address Subnet-Mask Port DHCP 192.168.10.10 255.255.255.0 10001 OFF Table 9: Standard factory configuration of the Ethernet connection Note:
The reader provides a DHCP able TCP/IP interface. It is recommended to use a shielded twisted pair STP CAT5 cable. 4.5 USB Interface X3 (Host communication) There is a USB-socket X3 on board for the connection of the USB-Interface. The pinout is standar-
dized. The data rate is reduced to 12 Mbit (USB full speed). A standard USB-cable can be used. Figure 5: USB interface for the host communication Note:
The length of the USB-cable can be a max. of 5 meter. It isnt allowed to use longer cables!
RFID Canada Page 15 of 26 Installation Manual RML-HFMR102 5 Control and display elements LED 5.1 LED The Readers LED can be configured through software. The following Table 10 shows the default setting. Abbreviation LED green LED red LED orange Description
"RUN "
- Turns on when the Reader is ready LABEL
- Turns on when a transponder is detected.
- Flashes if RF-Warning (red green alternating with 8Hz)
(Temperature alarm, short circuit on antenna output) INITIALIZING
- Flashes during Reader initialization after power-up. Table 10: Default configuration of the LEDs RFID Canada Page 16 of 26 Installation Manual RML-HFMR102 6 Technical Data Mechanical Data Housing ABS plastic Enclosed Dimensions (W x H x D) 85 x 145 x 27 mm / 3.35 x 5.71 x 1.06 in. Weight 200 g / 0.44 lbs Degree of Protection IP 30 Color similar RAL 9018 (papyrus white) Electrical Data Supply voltage RML-HFMR102-A/-B/-USB RML-HFMR102-PoE Power consumption 12 24V DC/
12 24V DC/
max. 9 W or PoE Operating frequency 13,56 MHz Transmitting power 1.2 W 1 dB Antenna connection SMA female (50 ) Antenna DC voltage 7.5V DC 1V (5mA) on antenna output
(e.g. for support of external LED) Interfaces RML-HFMR102-A RML-HFMR102-B RML-HFMR102-PoE RML-HFMR102-USB Features RS232 RS485 Ethernet (TCP/IP) USB 2.0
- Short circuit detection (antenna)
- Temperature control
- Support of external multiplexer ID ISC.ANT.MUX (in Host Mode) RFID Canada Page 17 of 26 Installation Manual RML-HFMR102 Functional Properties Protocol Modes
- FEIG ISO HOST
- Scan Mode Supported transponders
- ISO15693, ISO18000-3 Mode 1
(EM HF ISO Chips, Fujitsu HF ISO Chips, KSW Sensor Chips, IDS Sensor Chips, Infineon my-d, NXP I-Code, STM LRI ISO Chips, TI Tag-it)
- NXP I Code 1 Address setting for interface Software (0- 254 Addresses) Visual indicators 1 LED (multicolor red / green) Ambient Conditions Temperature range
- Operation
- Storage Humidity Vibration Shock Applicable Norms Radio approval
- USA
- Canada EMC Safety
- Low-Voltage
- Human Exposure
-25C to +55C / -13F to +131F
-25C to +45C / -13F to +113F (-PoE)
-25C to +85C / -13F to +185F 5 95% non condensing EN 60068-2-6 10 Hz to 150 Hz : 0,075 mm / 1 g EN 60068-2-27 Acceleration
: 30 g FCC 47 CFR Part 15 IC RSS-GEN, RSS-210 EN 300 489 UL 60950-1 EN 50364 RFID Canada Page 18 of 26 7 Radio Approvals Installation Manual RML-HFMR102 Intentionally Blank RFID Canada Page 19 of 26 Intentionally Blank RFID Canada Installation Manual RML-HFMR102 Page 20 of 26 Installation Manual RML-HFMR102 7.3 USA (FCC) and Canada (IC) 7.3.1 Radio approvals Product names:
Reader name:
FCC ID:
IC:
Notice for USA and Canada RML-HFMR102-A, RML-HFMRM102-A, RML-HFMR102-B, RML-
HFMR102-USB, RML-HFMRM102-USB, RML-HFMR102-PoE RML-HFMR102 WVF-HFMR102 6686A-HFMR102 This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions.
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the authority granted under Federal communications Commission Rules permitting the operation of this device. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Le prsent appareil est conforme aux CNR d'Industrie Canada appli-
cables aux appareils radio exempts de licence. L'exploitation est auto-
rise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonc-
tionnement. Warning: Changes or modification made to this equipment not expressly approved by RFID Canada may void the FCC authorization to operate this equipment. RFID Canada Page 21 of 26 Installation Manual RML-HFMR102 8 UL Approval - USA and Canada The following UL label position is on the back side of the reader. www.rfidcanada.com www.rfidcanada.com Model: RML-HFMR102-A 1-877-476-6760 IC: 6686A-HFMR102 FCC ID: WVF-HFMR102 Model: RML-HFMRM102-A 1-877-476-6760 IC: 6686A-HFMR102 FCC ID: WVF-HFMR102 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil conforme la section 15 des rgles FCC: (1) cet artifice peut ne pas provoquer linterfrence et (2) cet artifice doit accepter nimporte quelle interfrence qui peut provoquer lopration indsirable de lartifice. Pour rduire linterfrence radio potentielle dautres utilisateurs, le type dantenne et son augmentation devraient tre si choisis quistropically quivalent a brill le pouvoir nest pas plus que cela permis pour la communication russie. Cet appareil conforme la section 15 des rgles FCC: (1) cet artifice peut ne pas provoquer linterfrence et (2) cet artifice doit accepter nimporte quelle interfrence qui peut provoquer lopration indsirable de lartifice. Pour rduire linterfrence radio potentielle dautres utilisateurs, le type dantenne et son augmentation devraient tre si choisis quistropically quivalent a brill le pouvoir nest pas plus que cela permis pour la communication russie. www.rfidcanada.com Model: RML-HFMR102-B 1-877-476-6760 IC: 6686A-HFMR102 FCC ID: WVF-HFMR102 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil conforme la section 15 des rgles FCC: (1) cet artifice peut ne pas provoquer linterfrence et (2) cet artifice doit accepter nimporte quelle interfrence qui peut provoquer lopration indsirable de lartifice. Pour rduire linterfrence radio potentielle dautres utilisateurs, le type dantenne et son augmentation devraient tre si choisis quistropically quivalent a brill le pouvoir nest pas plus que cela permis pour la communication russie. www.rfidcanada.com www.rfidcanada.com www.rfidcanada.com www.rfidcanada.com Model: RML-HFMR102-POE 1-877-476-6760 IC: 6686A-HFMR102 FCC ID: WVF-HFMR102 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil conforme la section 15 des rgles FCC: (1) cet artifice peut ne pas provoquer linterfrence et (2) cet artifice doit accepter nimporte quelle interfrence qui peut provoquer lopration indsirable de lartifice. Pour rduire linterfrence radio potentielle dautres utilisateurs, le type dantenne et son augmentation devraient tre si choisis quistropically quivalent a brill le pouvoir nest pas plus que cela permis pour la communication russie. Model: RML-HFMR102 1-877-476-6760 IC: 6686A-HFMR102 FCC ID: WVF-HFMR102 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil conforme la section 15 des rgles FCC: (1) cet artifice peut ne pas provoquer linterfrence et (2) cet artifice doit accepter nimporte quelle interfrence qui peut provoquer lopration indsirable de lartifice. Pour rduire linterfrence radio potentielle dautres utilisateurs, le type dantenne et son augmentation devraient tre si choisis quistropically quivalent a brill le pouvoir nest pas plus que cela permis pour la communication russie. Model: RML-HFMR102-USB 1-877-476-6760 IC: 6686A-HFMR102 FCC ID: WVF-HFMR102 Model: RML-HFMRM102-USB 1-877-476-6760 IC: 6686A-HFMR102 FCC ID: WVF-HFMR102 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil conforme la section 15 des rgles FCC: (1) cet artifice peut ne pas provoquer linterfrence et (2) cet artifice doit accepter nimporte quelle interfrence qui peut provoquer lopration indsirable de lartifice. Pour rduire linterfrence radio potentielle dautres utilisateurs, le type dantenne et son augmentation devraient tre si choisis quistropically quivalent a brill le pouvoir nest pas plus que cela permis pour la communication russie. Cet appareil conforme la section 15 des rgles FCC: (1) cet artifice peut ne pas provoquer linterfrence et (2) cet artifice doit accepter nimporte quelle interfrence qui peut provoquer lopration indsirable de lartifice. Pour rduire linterfrence radio potentielle dautres utilisateurs, le type dantenne et son augmentation devraient tre si choisis quistropically quivalent a brill le pouvoir nest pas plus que cela permis pour la communication russie. RFID Canada Page 22 of 26 Installation Manual RML-HFMR102 Antenna 490 mm x 490 mm Copper Tube with manual tuning board Manual Tuning Board Antenna Cable - Coax 3.244m Torrid MODIFIED Midrange Reader w/ RS-232 Interface for the custom antennas Modified RS232/485 Interface Cable for the RML-HF-
MR-101 with RJ-45 Connector High Frequency Filter - Modified w/12" cable Modified RS232/485 Interface Cable for the RML-HF-
MR-101 with db9 Connector Antenna 500 mm x 315 mm Copper Tube with manual tuning board Table 11: Accessories 9 Annex 9.1 Accessories RML-
HFANT500/500-
B ID ISC.MAT-B CAB-CX-3244 74270115 RML-HF-MR-
101 RML CAB.RS-
RJ RML-HF-
FTR101 RML CAB.RS-
DB RML-ANT-
500/315 RFID Canada Page 23 of 26 Installation Manual RML-HFMR102 Manual Antenna Tuning board (ID ISC.ANT.MAT-B) Installed on loop antenna Both RML-HFANT500/500-B and RML-HFANT500/300-B antennas use Feigs manual tuning board. Make sure the tuning board used is Feigs ID ISC.ANT.MAT-B board; otherwise, the system will not be compliant with Industry Canada and FCC certifications. Manual Antenna Tuning board (ID ISC.ANT.MAT-B RFID Canada Page 24 of 26 Installattttion Manual RML-HFMR102 GND
(outside) Vcc
(inside) DC Jack 2,5 x 5,5mm Serial data cable with supply voltage connection 9.1.3 RS232/RS485 Converter The converter is a 2-channel RS232 to RS485 converter. No external power is required if two RS232 output handshake lines (RTS and DTR) are available. The supplied gender changer is in-
stalled on the RS485 side. Ser. cable incl. supply Reader with RS485 Gender changer Converter PC with RS232 Example: converter circuit RFID Canada Page 25 of 26 Installation Manual RML-HFMR102 490mm RML-HFANT500/500-B 9.1.4 Antenna 490mm 315mm 500mm RML-HFANT500/300-B
RFID Canada Page 26 of 26 H C S T U E D OBID i-scan Umgebungsbedingungen Montage ID ISC.SPAD102 Temperaturbereich
- Betrieb
- Lagerung
-25...+55C
-25...+85C Relative Luftfeuchtigkeit 5 bis 95% nicht betauend Angewendete Normen Zulassung Funk
- Europa
- USA
- Kanada EMV Sicherheit
- Niederspannung
- Human Exposure
- EN 300 330
- FCC 47 CFR Part 15
- RSS-Gen Issue 1, RSS-210 EN 301 489 EN 60950 EN 50364 FEIG ELECTRONIC GmbH Seite 15 von 32 M10414-0de-ID-B_110711.doc OBID i-scan Montage ID ISC.SPAD102 H C S T U E D 6.1 Zulassung 6.1.1 Europa (CE) Die Funkanlage entspricht, bei bestimmungsgemer Verwendung den grundlegenden Anforde-
rungen des Artikels 3 und den brigen einschlgigen Bestimmungen der R&TTE Richtlinie 1999/5/EG vom Mrz 99. Equipment Classification gem ETSI EN 301 489: Class 2 FEIG ELECTRONIC GmbH Seite 16 von 32 M10414-0de-ID-B_110711.doc H C S T U E D OBID i-scan 6.1.2 USA und Kanada Montage ID ISC.SPAD102 Product names:
ID ISC.SPAD102-USB, ID ISC.SPAD102-PoE Reader name:
FCC ID:
IC:
ID ISC.MR102 PJMMR102 6633A-MR102 Notice for USA and This device complies with Part 15 of the FCC Rules and with Canada RSS-210 of Industry Canada. Operation is subject to the following two conditions.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the authority granted under Federal communications Commission Rules permitting the operation of this device. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Le prsent appareil est conforme aux CNR d'Industrie Canada appli-
cables aux appareils radio exempts de licence. L'exploitation est auto-
rise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonc-
tionnement. Warning: Changes or modification made to this equipment not expressly approved by FEIG ELECTRONIC GmbH may void the FCC authorization to operate this equipment. FEIG ELECTRONIC GmbH Seite 17 von 32 M10414-0de-ID-B_110711.doc OBID i-scan Installation ID ISC.SPAD102 Note Copyright 2011 by FEIG ELECTRONIC GmbH Lange Strasse 4 D-35781 Weilburg Tel.: +49 6471 3109-0 http://www.feig.de H S I L G N E With the edition of this document, all previous editions become void. Indications made in this manual may be changed without previous notice. Copying of this document, and giving it to others and the use or communication of the contents thereof are forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design. Composition of the information in this document has been done to the best of our knowledge. FEIG ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this ma-
nual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips. The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC GmbH does not give any guarantee promise for perfect function in cross environments. FEIG call explicit attention that devices which are subject of this document are not designed with compo-
nents and testing methods for a level of reliability suitable for use in or in connection with surgical implants or as critical components in any life support systems whose failure to perform can reasonably be expected to cause significant injury to a human. To avoid damage, injury, or death, the user or application designer must take reasonably prudent steps to protect against system failures. FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this docu-
ment and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does not convey any license under its patent rights nor the rights of others. OBID and OBID i-scan are registered trademarks of FEIG ELECTRONIC GmbH. FEIG ELECTRONIC GmbH Page 18 of 32 M10414-0de-ID-B_110711.doc H S I L G N E OBID i-scan Installation ID ISC.SPAD102 7 8 Content Safety Instructions / Warning - Read before start-up !
Performance Features 20 21 8.1 Order Reference ........................................................................................................ 21 8.2 Scope of delivery ...................................................................................................... 21 9 Assembly and Wiring 22 9.1 Dimensions ............................................................................................................... 22 9.2 Mounting under a desktop ....................................................................................... 23 10 Connections 24 10.1 Power supply ............................................................................................................ 24 10.1.1 Power supply via X1 ............................................................................................... 24 Power supply recommendations :
24 10.1.2 Power supply via PoE (Power over Ethernet) on X4 (ID ISC.SPAD102-PoE) ......... 25 10.2 Interfaces ................................................................................................................... 26 10.2.1 USB-Interface (ID ISC.SPAD102-USB) .................................................................. 26 10.2.2 Ethernet-Interface (ID ISC.SPAD102-PoE) ............................................................ 27 11 Display (LED) 12 Technical Data 28 29 12.1 Approvals .................................................................................................................. 31 12.1.1 Europe (CE) ........................................................................................................... 31 12.1.2 USA (FCC) and Canada (IC) .................................................................................. 32 FEIG ELECTRONIC GmbH Page 19 of 32 M10414-0de-ID-B_110711.doc H S I L G N E OBID i-scan Installation ID ISC.SPAD102 7 Safety Instructions / Warning - Read before start-up !
The device may only be used for the intended purpose designed by for the manufacturer. The operation manual should be conveniently kept available at all times for each user. Unauthorized changes and the use of spare parts and additional devices which have not been sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized measures shall exclude any liability by the manufacturer. The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in the manual or automatically set parameters for a device or for an incorrect application of a device. Repairs may only be executed by the manufacturer. Installation, operation, and maintenance procedures should only be carried out by qualified personnel. Use of the device and its installation must be in accordance with national legal requirements and local electrical codes . When working on devices the valid safety regulations must be observed. Special advice for carriers of cardiac pacemakers:
Although this device doesn't exceed the valid limits for electromagnetic fields you should keep a minimum distance of 25 cm between the device and your cardiac pacemaker and not stay in an immediate proximity of the device respective the antenna for some time. FEIG ELECTRONIC GmbH Page 20 of 32 M10414-0de-ID-B_110711.doc H S I L G N E OBID i-scan 8 Performance Features Installation ID ISC.SPAD102 The Shielded Pad Reader ID ISC.SPAD102 is designed for reading passive data carriers, so-
called Smart Labels at an operating frequency of 13.56 MHz with a maximum output power of 1,5 W. The ID ISC.SPAD102 is suitable for all applications in which moderate reading distances are required. A shielded antenna and a reader is integrated in a plastic housing. Due to the shielding the communication with the transponder is widely limited on the top area oft the antenna. The possibility to place the antenna ID ISC.SPAD102 directly on metal without changing the an-
tenna parameter is a second essential advantage of this antenna. An anti-collision function enables simultaneous reading of up to 30 transponders per second. The antenna may be used for detecting both product or persons. The preferred orientation of a Smart Label is parallel to the antenna surface. The maximum range is achieved over the center of the antenna surface. 8.1 Order Reference The following variants are available currently:
Table 8-1: Order reference Shielded Pad-Reader Order No. Name Description 3756.000.00 ID ISC.SPAD102-USB Shielded Pad Reader with USB Interface 3513.000.00 ID ISC.SPAD102-PoE Shielded Pad Reader with Ethernet Interface (PoE) 8.2 Scope of delivery Within the scope of delivery the reader ID ISC.SPAD102 came including connection cable assembly and mounting instruction. FEIG ELECTRONIC GmbH Page 21 of 32 M10414-0de-ID-B_110711.doc H S I L G N E OBID i-scan 9 Assembly and Wiring Installation ID ISC.SPAD102 The antenna is intended for the indoor use on a plane surface (desktop) or for the mounting behind or under a mounting plate (non-conductive). For the operation on a plane surface rubber bumper are mounted on the backside of the antenna. The mounting behind or under a mounting plate can take place via domes, which are suggested with bore holes on the backside of the antenna housing. 9.1 Dimensions The dimensions and the mounting holes of the shielded pad antenna are shown in the following picture. All dimensions are shown in mm (inch):
Figure 1: Dimensions of the antenna and positions of mounting holes (backside) FEIG ELECTRONIC GmbH Page 22 of 32 M10414-0de-ID-B_110711.doc 376,2 (14,81)275,7 (10,85)280 (11,02)215 (8,46)140 ( 5,51)42,8 (1,68)240 (9,44)6 x 1,5 (0,06) H S I L G N E OBID i-scan 9.2 Mounting under a desktop Installation ID ISC.SPAD102 For the mounting under a desktop or a mounting plate the mounting holes (max. 4mm) must be drilled. The position of the mounting holes are suggested via 1,5mm drill holes in the housing backside of the antenna (see figure 1). Drill holes on a different place can destroy the antenna. FEIG ELECTRONIC GmbH Page 23 of 32 M10414-0de-ID-B_110711.doc Installation ID ISC.SPAD102 OBID i-scan 10 Connections 10.1 Power supply 10.1.1 Power supply via X1 H S I L G N E Connect the 12-24 V DC/
supply voltage to socket X1 on the circuit board. Table 10-1: Connecting the supply voltage Terminal Name Description X1 / inside VDC Vcc supply voltage (+) X1 / outside GND Ground supply voltage (-) X 1 Note:
Reversing the polarity of the supply voltage may destroy the device. Power supply recommendations :
To take full advantage of the Reader performance, you must use a sufficiently regulated and low-
noise power supply. When using a switching power supply, be sure that its internal switching fre-
quency is less than 300 kHz. Table 10-2: Recommended power supply:
Feig Article No Part No. Description. 1688.002.00 ID NET.12V-B Power Supply Unit 12 V FEIG ELECTRONIC GmbH Page 24 of 32 M10414-0de-ID-B_110711.doc OBID i-scan Installation ID ISC.SPAD102 10.1.2 Power supply via PoE (Power over Ethernet) on X4 (ID ISC.SPAD102-PoE) Optional the reader (only MR102-PoE) can be powered via the LAN connector on X4 with the use of a PoE Power over Ethernet power supply according to IEEE802.3af*, Class2 (6,49 Watt). The DC supply can be achieved via the free pins 4,5 and 7,8 (Midspan-Power). Also a Phantom Powering (Inline-Power) via the signal pins 1,2,3,and 6 is possible. H S I L G N E X4 Figure 2: LAN and PoE connection Note:
It must be ensured that the reader is supplied with 42,5 V DC (48 V DC cable losses) at least. The maximum cable distance for Ethernet is 100m.
* For detailed technical information regarding the 802.3af standard, please refer to the most recent edition of the corresponding IEEE specification. Table 10-3: Recommended PoE Power Supply Article No. Name Description 0000.000.00 ID NET.PoE Power over Ethernet Supply FEIG ELECTRONIC GmbH Page 25 of 32 M10414-0de-ID-B_110711.doc OBID i-scan 10.2 Interfaces Installation ID ISC.SPAD102 10.2.1 USB-Interface (ID ISC.SPAD102-USB) There is a USB-socket X3 on board for the connection of the USB-Interface. The pinout is standar-
dized. The data rate is reduced to 12 Mbit (USB full speed). A standard USB-cable can be used.. H S I L G N E Figure 3: USB-Interface for host communication Note:
The length of the USB-cable can be a max. of 5 meter. It isnt allowed to use longer cables!
FEIG ELECTRONIC GmbH Page 26 of 32 M10414-0de-ID-B_110711.doc OBID i-scan Installation ID ISC.SPAD102 10.2.2 Ethernet-Interface (ID ISC.SPAD102-PoE) The Reader has an integrated 10 / 100 base-T network port for an RJ-45. Connection is made on X2 and has an automatic Crossover Detection according to the 100BASE-T Standard. H S I L G N E Abbildung 5: Anschluss Ethernet-Schnittstelle With structured cabling CAT 5 cables should be used. This ensures a reliable operation at 10 Mbps or 100 Mbps. The prerequisite for using TCP/IP protocol is that each device has a unique address on the net-
work. All Readers have a factory set IP address. Interface parameter can be configured via soft-
ware protocol Table 10-4: Standard factory configuration of the Ethernet connection Network IP-Address Subnet-Mask Port DHCP Note:
The reader provides a DHCP able TCP/IP interface. Address 192.168.10.10 255.255.255.0 10001 OFF FEIG ELECTRONIC GmbH Page 27 of 32 M10414-0de-ID-B_110711.doc H S I L G N E OBID i-scan 11 Display (LED) Installation ID ISC.SPAD102 The blue LED indicates the operating status of the Shielded Pad-Readers:
Table 11-1: LED-Display LED-Signal Description LED flashes after power on Reader software will be booted LED on LED flash LED off RF power 13,56 MHz switched on Reading transponder RF power 13,56 MHz switched off FEIG ELECTRONIC GmbH Page 28 of 32 M10414-0de-ID-B_110711.doc H S I L G N E OBID i-scan 12 Technical Data Mechanical Data Housing
- Upper Part
- Cover Plate
- Lower Part Dimension (W x H x D) Weight Protection class Color
- Housing
- Cover Plate Installation ID ISC.SPAD102
- Plastic ABS
- Acryl glass
- Galvanized metal sheet 376 x 276 x 26,8 mm
(14,8 x 10,87 x 1,06 inch) ca. 2,0 kg IP 30
- similar RAL 9003 (white)
- Transparent, black Screen back printed Electrical Data Power supply
- 12..24 VDC
- PoE (ID ISC.SPAD102-PoE only) 15 %
Power consumption max. 6 VA Operating frequency 13,56 MHz Transmitting power 1,5 W 1 dB Interface Protocol Modes Supported Transponder
- Ethernet (TCP/IP) (ID ISC.SPAD102-PoE)
- USB (ID ISC.SPAD102-USB)
- ISO Host Mode
- Scan Mode
- Notification Mode ISO15693, ISO18000-3 Mode 1
(EM HF ISO Chips, Fujitsu HF ISO Chips, KSW Sensor Chips, IDS Sensor Chips, Infineon my-d, NXP I-Code, STM LRI ISO Chips, TI Tag-it) Visual indicators LED blue (Operating status) FEIG ELECTRONIC GmbH Page 29 of 32 M10414-0de-ID-B_110711.doc OBID i-scan Ambient Conditions Temperature range
- Operation
- Storage Installation ID ISC.SPAD102
-25C to +55C / -13F to +131F
-25C to +85C / -13F to +185F Humidity 5 95% non condensing H S I L G N E Applicable Norms Radio approval
- Europe
- USA
- Canada EMC Safety
- Low-Voltage
- Human Exposure
- EN 300 330
- FCC 47 CFR Part 15
- RSS-Gen Issue 1, RSS-210 EN 301 489 EN 60950 EN 50364 FEIG ELECTRONIC GmbH Page 30 of 32 M10414-0de-ID-B_110711.doc H S I L G N E Installation ID ISC.SPAD102 OBID i-scan 12.1 Approvals 12.1.1 Europe (CE) This RF equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC dated March 99. Equipment Classification according to ETSI EN 300 330 and ETSI EN 301 489: Class 2 FEIG ELECTRONIC GmbH Page 31 of 32 M10414-0de-ID-B_110711.doc H S I L G N E OBID i-scan Installation ID ISC.SPAD102 12.1.2 USA (FCC) and Canada (IC) Product names:
ID ISC.SPAD102-USB, ID ISC.SPAD102-PoE Reader name:
FCC ID:
IC:
ID ISC.MR102 PJMMR102 6633A-MR102 Notice for USA and This device complies with Part 15 of the FCC Rules and with Canada RSS-210 of Industry Canada. Operation is subject to the following two conditions.
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Unauthorized modifications may void the authority granted under Federal communications Commission Rules permitting the operation of this device. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Le prsent appareil est conforme aux CNR d'Industrie Canada appli-
cables aux appareils radio exempts de licence. L'exploitation est auto-
rise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonc-
tionnement. Warning: Changes or modification made to this equipment not expressly approved by FEIG ELECTRONIC GmbH may void the FCC authorization to operate this equipment. FEIG ELECTRONIC GmbH Page 32 of 32 M10414-0de-ID-B_110711.doc
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-02-01 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2012-02-01
|
||||
1 | Applicant's complete, legal business name |
RFID Canada Inc
|
||||
1 | FCC Registration Number (FRN) |
0018247692
|
||||
1 | Physical Address |
19-25 Valleywood Drive
|
||||
1 |
Markham, Ontario, N/A L3R 5L9
|
|||||
1 |
Canada
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
d******@phoenix-testlab.de
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
WVF
|
||||
1 | Equipment Product Code |
HFMR102
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B****** M******
|
||||
1 | Title |
President
|
||||
1 | Telephone Number |
905-5******** Extension:
|
||||
1 | Fax Number |
905-5********
|
||||
1 |
b******@rfidcanada.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | RFID Reader | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Limited Single Modular Approval | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Limited Modular Approval. This device must be professionally installed. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
m. dudde hochfrequenz-technik
|
||||
1 | Name |
M****** D********
|
||||
1 | Telephone Number |
49-22******** Extension:
|
||||
1 | Fax Number |
49-22********
|
||||
1 |
m******@t-online.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 | 0.0100000000 % |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC