FCC ID: PPXAVADIN-1 WIRELESS CHARGER

Quick Start Guide 01. Before Use Make sure to read this user manual before using the product to ensure safe and correct use. The images in this user manual may different from the actual appearance. The content is subject to change without prior notice for the purpose of improving product performance. In order to use the product in combination with a mobile device, make sure to check whether the mobile device is compatible with the product. Precautions During Use We cannot be held liable for any injuries or damages caused by failure to follow the safety precautions. Do not arbitrarily disassemble or modify the product. Take measures to prevent children, infants or pets from sucking on or biting the product. Do not connect the power cable to the product while wet. Do not drop the product or subject it to impact, and do not place any heavy objects on the product. Do not place the product inside or near a heating apparatus. Keep it in a dry place without moisture. Do not use or store the product in a dusty or dirty place. Stop using the product if you notice any unusual odor, noise, foreign matter, smoke or any unusual phenomenon concerning the product. Do not place any metal objects on the product. Be careful not to let any conductive matter (liquid, dust, metal powder, pencil lead, etc.) enter the connection part (external connector jack and plug) of the charger. Use an adapter that satisfies the rating. Install the product where it is easy to connect and disconnect the power plug. The power plug must be disconnected promptly in case of a problem. Do not pull on or shake the product with excessive force. Otherwise, the product may become damaged. Keep the product away from areas where the signal may be affected. Metals and products that generate electromagnetic waves such as an oven may affect the signal. Use the product within 0C~35C. Do not store it at temperatures that are too low or too high. Otherwise, the product may become damaged. When cleaning the product, be sure to unplug the power cord and wipe the surface gently with a dry towel. Do not use chemicals or detergents (e.g. benzene, alcohol, etc.), which may deteriorate the surface and cause the coating to peel off. 10 02. Product Package Quick Start Guide Body of the device Quick Start Guide Parts & Their Names Cradle Charging unit Status light Charger connector jack (Type-C) E n g l i s h 11 03. How to Use 1. Connect the product with the charger. 3. Place your mobile device in the center of the wireless charging cradle. Be sure to use an authentic KC-certified charger. Use a fast charging charger (9V1.67A, 9V/2A) for high-speed wireless charging. Using the 5V/2A charger will result in wireless charging at normal speed. 2. Please wait after connecting the charger for the motor to return to the original point. Use the device when the mobile device cradle turns left and right and then stops in the middle. If the mobile device cradle does not stop in the middle, disconnect the charger and reconnect it. Do not shake the product or grab it with force while it is rotating. 12 Because magnetic induction charging technology is applied, the device may not become properly charged if there is presence of foreign matter (metallic material) between the mobile device and the product. In case the mobile device has a cover, wireless charging may not occur properly depending on the type of cover used. In the case of magnetic stripe cards, etc. such as credit cards, phone cards, bankbooks, and transit passes, the information stored on them may become damaged due to the magnetism of the product. Placing the mobile device vertically Placing the mobile device horizontally E n g l i s h 13 The status of the product can be checked based on the status light. Check the charging status of the mobile device to see whether it is being properly charged. Wireless charging status LED lamp Power connection Red Green Orange Blinks before turning off Standby Charging Charging complete Protective function in operation Off Red Green Blinks in red 4. How to Connect with Mobile Device App Visit http://www.1thefull.com to check the product information and the information on how to connect it to the app. BLE-related Precautions When using this product with a Bluetooth device, keep them as close as possible. When turning the device off and then back on, the Bluetooth device must be connected again. Multi pairing is not supported, and only one Bluetooth device may be connected. If the device is turned off or the device and the connected Bluetooth device are placed far apart, they will become automatically disconnected. 14 04. Product Specification Input power 5V/2A or 9V/1.67A or 9V/2.0A Item Model Bluetooth version Operating temperature Dimensions (mm) Weight (g) Specification AVAdin-1 BLE 5.0 0C~35C 120x120x165 47010%

LG mobile devices can be wirelessly charged only at normal speeds. 1. FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. 3. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. E n g l i s h 15 The warranty period is one year from the date of purchase. After purchasing the product, please fill out the following warranty certificate and keep the purchase receipt to confirm the date of purchase. If it is difficult to confirm the date of purchase, the warranty period will be calculated from 3 months after the date of manufacture. Warranty Certificate Product:

Model:

Vendor:

Serial No. :

Date of purchase :

Customer Support In case of product failure, malfunction, etc., please contact the vendor or call 1644-5622. After the repair, any defective parts, etc. will be recovered by our company to prevent reuse and ensure safety. Eligible for Free Warranty Services Malfunctions, failures, etc. occurring during normal use within the warranty period

(1 year from the date of purchase) Normal use can only occur after disassembling the product to replace certain parts. Not Eligible for Free Warranty Services Requesting services, etc. for reasons other than product malfunction or failure, charges may be imposed, irrespective of whether the warranty is still valid, so make sure to check the user manual before requesting services. Failure caused by unauthorized disassembly, modification, repair, etc. Failure caused by an accident or natural disaster (fire, flood, lightning strike, etc.) Failure caused by non-compliance with the precautions or user negligence (inundation, damage, etc.) 16 17

RFTECH Co., Ltd. 60, Jugyangdaero 1763Beon-gil, Wonsam-myeon, Cheoin-gu Yong-in-si, Gyeonggi-do, Korea 2020/03/17 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 REQUEST FOR CONFIDENTIALITY FCC ID: PPXAVADIN-1 To Whom It May Concern:

Pursuant to Sections 0.457 and 0.459 of the Commissions Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, RFTECH hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors We are also hereby request ShortTerm Confidentiality for 180 days after the grant as outlined in Public Notice DA 041705. This provision will give RFTECH temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows:

CONFIDENTIAL LIST Permanent ShortTerm 1 Block Diagram 2 Operational Descriptions 3 4 5 6 7 Schematics Part list External Photos Internal Photos TestSetup Photos 8 User Manual Sincerely Yours, Dong-Hyuk, Hwang Manager / RFTECH Co., Ltd. The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application.

60, Jugyangdaero 1763Beon-gil, Wonsam-myeon, Cheoin-gu Yong-in-si, Gyeonggi-do, Korea RFTECH Co., Ltd. 2020/03/17 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 LETTERFORAUTHORIZATION FCC ID: PPXAVADIN-1 Towhomitmayconcern:

I,theundersigned,herebyauthorizeLabManagerHyunchae, You (or Jungmin, Yang) andof SGSKoreaCo.,Ltd.andhereafterreferredtoasSGSKorea,toactonourbehalfinallmannersrelating toapplicationforequipmentauthorization,includingsigningofalldocumentsrelating tothesematters.AnyandallactscarriedoutbyLabManagerHyunchae, You(or Jungmin, Yang)of SGSKoreaCo.,Ltd.onourbehalfshallhavethesameeffectasactsofourown. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includesFCCbenefits,pursuanttoSection5301oftheAntiDrugAbuseActof1988,21U.S.C. 853(a). InauthorizingSGSKoreaasouragent,westillrecognizethatweareresponsibleto:

a) complywiththerelevantprovisionsofthecertificationprogram;

b) makeallnecessaryarrangementsfortheconductoftheevaluation,includingprovision forexaminingdocumentationandaccesstoallareas,records(includinginternalaudit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment,surveillance,reassessment)andresolutionofcomplaints;

c) makeclaimsregardingcertificationonlyinrespectofthescopeforwhichcertification hasbeengranted;

d) do not use our product certification in such a manner as to bring the Certification Divisionintodisreputeandnotmakeanystatementregardingourproductcertification whichtheCertificationDivisionmayconsidermisleadingorunauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any referencethereto and returnanycertification documents as requiredbytheCertificationDivision;

f) usecertificationonlytoindicatetheproductsarecertifiedasbeinginconformitywith specifiedstandards;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleadingmanner;

h) ensurethatanyreferencetoourproductcertificationincommunicationmediasuchas documents, brochures or advertising, complies with the requirements of the CertificationDivision;

60, Jugyangdaero 1763Beon-gil, Wonsam-myeon, Cheoin-gu Yong-in-si, RFTECH Co., Ltd. Gyeonggi-do, Korea i) j) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records availabletotheCertificationDivisionwhenrequested;

takeappropriateactionwithrespecttosuchcomplaintsandanydeficienciesfoundin productsorservicesthataffectcompliancewiththerequirementsforcertification;

k) documenttheactionstaken. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. SincerelyYours Dong-Hyuk, Hwang Manager / RFTECH Co., Ltd.

Cover Letter-Wireless Charger Approval FCC ID: PPXAVADIN-1 Date: 16 Mar, 2020 Gentlemen:

Theres a AVAdin-1 that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, AVAdin-1, with its designed features and specified description, considers special requirements for KDB 680106 DO1 v03 section 5, b) requirements. KDB 680106 D01 v03 Section 5, b) Requirements: | Product Technical Specification: | Result:

(1) Power transfer frequency is less that 1 MHz 0.110 1 ~ 0.205 MHz Complied

(2) Output power from each primary coil is less than | 15 Watts Complied or equal 15 watts.

(3) The transfer system includes only single primary | The transfer system including a Complied and secondary coils. This includes charging systems | charging system with one primary that may have multiple primary coils and clients that coil is to detect and allow only are able to detect and allow coupling only between between individual pairs of coils. individual pairs of coils

(4) Client device is placed directly in contact with Client device is placed directly in Complied the transmitter contact with the transmitter.

(5) Mobile exposure conditions only (portable Mobile conditions only Complied exposure conditions are not covered by this exclusion).

(6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. H-Field: 0.090 A/m (at 15 em)

< 0.815 A/m (50% of the limit) Complied Sincerely, . By: Jungmin Yang

(Signature) (Print name) Title: Technical Manager On behalf of: SGS Korea Co., Ltd. (Company Name) Telephone: +82-31-428-0903