FCC ID: 2AZ3JR230 R230 5MP Microdome Camera

Plug in your Rhombus Camera Use a PoE power source compliant with 802.3af PoE Install the Rhombus Systems Mobile App Available on iOS and Android Tap Register on the Mobile App Follow the apps instructions to complete registration Want to learn more?

For more details, access to Rhombus apps and support, and mounting instructions, scan the QR code!

Regulatory Compliance Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada statement:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference

(2) This device must accept any interference, including interference that may cause undesired operation of the device Cet appareil contient des metteurs / rcepteurs exempts de licence qui sont conformes au (x) RSS (s) exempts de licence d'Innovation, Sciences et Dveloppement conomique Canada. L'opration est soumise aux deux conditions suivantes:

(1) Cet appareil ne doit pas causer d'interfrences

(2) Cet appareil doit accepter toute interfrence, y compris les interfrences pouvant provoquer un fonctionnement indsirable de l'appareil Radiation Exposure Statement:

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:

Cet quipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrl. Cet quipement doit tre install et utilis distance minimum de 20cm entre le radiateur et votre corps. EU Importer/Distributor: Schillingweg 64, 2153 PL Niew-Vennep, Amsterdam, The Netherlands Grounding/Earthing:

If protective earthing is used as a safeguard, connection of the equipment protective earthing conductor to the installation protective earthing conductor (for example, by means of a power cord connected to a socket-outlet with earthing connection) is required. Grounding screw: Torx 20 with Security Pin Screw, Diameter: M4*0.7P / Head Dia.:7 mm. Thread Length: 6 mm. Grounding wire: diameter of ground wire is 18AWG minimum, the color of ground wire two-color yellow green. Grounding washer: Type: Toothed Lock Washer (External Teeth), Diameter: OD= 8.5mm, ID= 4.3mm/ Thickness: 0.9mm. Mounting on Wall or Ceiling:

Open dome by unscrewing three housing screws with included Torx tool Use included mount template to drill holes for screws and cable Use three included M4x25mm round head self-tapping screws to mount base to surface Use three included anchors when mounting to softer materials Replace dome and tighten three housing screws with included Torx tool Connection:

The camera is only to be connected to PoE networks without routing to outside plants If powered by a power adapter, the adapter should be properly grounded The product will be installed under the eaves of the building and will avoid direct exposure of the external wire to the sun and water environment. Please contact Rhombus certified dealers for power adapters

Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa RF_754_02 Page 1 of 2 15-02-2023 U.S. Agent Designation for Service of Process

(Applicant is Both Grantee and U.S. Agent) TO:

Kiwa Nederland B.V. Wilmersdorf 50 7327 AC Apeldoorn Postbus 137 7300 AC Apeldoorn Netherlands ATTENTION: FCC Certification Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information changes. Applicant & Agent Company name:

FRN:

Grantee Code:

Contact person name:

Agent name:

Street address:

ZIP/City/State Telephone number:

Email address:

Signature Contact person*:

Rhombus Systems, Inc 0030968606 2AZ3J Dave Gustafson Dave Gustafson 1920 20th Street Sacramento

(650) 269-7258 dave@rhombussystems.com Date:

Signature Agent*:

Date:

30 June 2023 3 July 2023 Grantee also Agent for Service of Process_FCC_Attestation Statements_Kiwa RF_754_02 Page 2 of 2 15-02-2023 Note *Must be signed by both the applicant, and agent on behalf Revision Record Sheet:

Revision Section Page Date Remark(s) number number 01 02 09-02-2023 1st version 1 15-02-2023 Added FRN issued by RvM RvdM Issued/modified by Function Revision Date

: Richard van de Meer

: Certification assessor

: 02

: 15-02-2023 Verified by Function Date

: Willem Jan Jong

: Team Lead

: 16-02-2023 Released by Function Date of release:

: Axel Gase

: Manager Quality Assurance

: 19-02-2023

Covered list attestation FCC application letter Kiwa RF_755_02 Page 1 of 2 15-02-2023 Certification Application Attestation Statements Rhombus Systems, Inc 1920 20th Street CA 95811 Sacramento, United States Subject: FCC ID: 2AZ3JR230 To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) Rhombus Systems, Inc certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Statement for 47 CFR section 2.911(d)(5)(ii) Rhombus Systems, Inc (the applicant) certifies that, as of the date of the filing of this application, the applicant

- is /

- is not (3) identified on the Covered List as an entity producing covered equipment. Date:

City:

Name(2) :

Function:

Telephone number:

Email address:

Signature:

Sacramento Dave Gustafson Vice President of Hardware

(650) 269-7258 dave@rhombussystems.com 1 - The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist .

(2): For FCC it must be the Grantee Code owner or the authorized agent.

(3): double click on the appropriate box and select checked then OK Covered list attestation FCC application letter Kiwa RF_755_02 Page 2 of 2 15-02-2023 Revision Record Sheet:

Revision Section Page Date Remark(s) number number 07-02-2023 1st version 01 02 issued by RvM 1 15-02-2023 Changed Applicant to Company RvdM and added Subject: FCC ID:

Issued/modified by Function Revision Date

: Richard van de Meer

: Certification assessor

: 02

: 15-02-2023 Verified by Function Date

: Willem Jan Jong

: Team Lead

: 16-02-2023 Released by Function Date of release:

: Axel Gase

: Manager Quality Assurance

: 19-02-2023

RF_160_05 Declaration of Authorisation Date of issue 02-01-2023 Declaration of Authorization We Name:

Address:

City:

Country:

Declare that:

Rhombus Systems, Inc 1920 20th Street Sacramento, CA 95811 United States Name Representative of agent:

Agent Company name:

Address:

City:

Country Gary Wu (1) Wendell Industrial Co., Ltd. 1F, No. 119, Wugong 3rd Rd., Wugu Dist. New Taipei City Taiwan R.O.C. is authorized to apply for Certification of the following product(s):

Product description: R230 5MP Microdome Camera Type designation: R230, R230-XXXXX (XXXXX = 128GB, 256GB, 512GB, 1TB, space or blank) Trademark:

Validity/ expiry date Rhombus Systems on our behalf. Date:

City:

Name:

30 June 2023.. Sacramento Dave Gustafson (2) Function:

Vice President of Hardware Signature:

. Notes:

(1): Required for FCC application

(2): For FCC it must be the Grantee Code owner or the authorized agent. Revision Record Sheet:

Revision Section number 02 Page number Date Remark(s) issued by 1 02-01-2023 History sheet added AG Issued/modified by Function Revision Date

: Axel Gase

: Quality Manager

: 02

: 02-01-2023 Verified by Function Date

: Willem Jan Jong

: Team Lead

: 02-01-2023 Released by Function Date of release:

: Axel Gase

: Manager Quality Assurance

: 02-01-2023

FCC, Request for non-disclosure RF_501, Issue 10 Date: 02-01-2022 Company Name: Rhombus Systems, Inc Address:

City:

Country:

1920 20th Street Sacramento, CA 95811 United States To: Kiwa Netherlands B.V., Dept. FCC TCB Wilmersdorf 50 7327 AC Apeldoorn The Netherlands Subject: Request for confidentiality FCC ID: 2AZ3JR230 Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (See notes below):

Internal Photos Users Manual Test Set-up Photos External Photos Justification:

Date: 30 June 2023 Name and signature of applicant: Dave Gustafson Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

The planned date should state in the RF731 application form. 3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Kiwa NL B.V. at least 7 days before date of actual marketing or before expiration of the STC period FCC, Request for non-disclosure RF_501, Issue 10 Revision Record Sheet:

Date: 02-01-2023 Page 1 of 1 Revision Section number 10 Page number Date Remark(s) issued by 1 02-01-2023 History sheet added AG Issued/modified by Function Revision Date

: Axel Gase

: Quality Manager

: 10

: 02-01-2023 Verified by Function Date

: Willem Jan Jong

: Team Lead

: 02-01-2023 Released by Function Date of release:

: Axel Gase

: Manager Quality Assurance

: 02-01-2023