LED INDICATORS STATUS Low Battery Charging Device Full Charge Pairing Device Device Paired Aux In INDICATOR Red Flashing Light Red Solid Light No Light Blue Flashing Light Blue Solid Light Green Solid Light PAIRING A BLUETOOTH DEVICE 1. Slide the Power Switch to ON. 2. Press and hold the Pair button to begin pairing. The Pairing Indicator will begin flashing quickly. When pairing, remain within 3 feet of the unit. 3. Using the controls on your Bluetooth device, scan for and select ISB35 in your Bluetooth settings to pair. If your device requests a password, enter the default password 0 0 0 0 . Refer to the users manual for your specific device for instructions on pairing and connecting Bluetooth devices. 4. When successfully paired, the Pairing Indicator will turn solid and an audible chime will sound through the speaker. After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device. If your device should become unpaired or you find it is unable to connect, repeat the above steps. PLAYING AUDIO WIRELESSLY 1. Use the controls on the connected device to select an audio track. 2. Audio played through the connected Bluetooth device will now be heard through the speaker. Use controls on your device to play, pause, skip, and change the volume. AUX IN Requires a 3.5mm audio cable (not included). 1. Connect a 3.5mm audio cable to the Aux In input on the unit and the audio output on an audio device. 2. Audio played through the connected device will now be heard through the speaker. Use controls on your device to play, pause, skip, and change the volume. INTERNATIONAL SUPPORT To download this Users Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com Para descargar este Manual del Usuario en ingls, espaol y francs, o para obtener respuestas a preguntas frecuentes, visite la seccin de apoyo en:
www.iLiveElectronics.com Pour tlcharger ce guide de lutilisateur en anglais, espagnol ou franais, ou pour obtenir des rponses des questions frquemment poses, consultez la rubrique dassistance sur: www.iLiveElectronics.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CONTACT INFORMATION Website: www.iLiveElectronics.com Email Support: prodinfo@dpiinc.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 WARRANTY For Warranty Information and the most up-to-date version of this Users Guide, go to: www.iLiveElectronics.com Portable Wireless Speaker with LED Lights Users Guide for Model No. ISB35 v1284-01 WARNINGS AND PRECAUTIONS WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture. WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining. WARNING: Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable. NOTE: This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead after several attempts to charge, please contact 1-888-999-4215 for support. Never disassemble the unit or attempt to remove the battery as that could cause leakage of an electrolytic substance. FCC WARNINGS Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FEATURES Built-in Bluetooth speaker Wireless range: 60 feet Supports automatic device pairing Aux In (3.5mm audio input) Micro-USB port for battery recharge Color-changing LED lights with auto and manual color-changing modes DC battery power: built-in rechargeable lithium ion battery Battery life:
approx. 3 hours INCLUDES Micro-USB to USB cable OVERVIEW Side View Pairing/Aux In Indicator Aux In (3.5mm audio input) Micro-USB Charging Port LED Light Strip Charge Indicator OVERVIEW Bottom View Power OFF/ON Pair Bluetooth Lights Press once to power lights on. Press again to pause. Press and hold to power lights off. Note: Powering off the lights does not power off the unit. CHARGING THE BATTERY Requires a Micro-USB to USB cable (included). Note: Be sure the computer is not in sleep mode. 1. Using a Micro-USB to USB cable (included), connect the larger USB plug to the USB port of a powered on computer or USB power adaptor. 2. Connect the smaller Micro-USB plug into the Micro-USB port of the unit. The unit will now charge.